WPF application crashing in Firefox

Similar Questions

• Note the application crashes...

  Note the application crashes... I have discovered that by putting my phone on "airplane mode" the app not crushed. This makes me think that there may be a conflict with the iCloud? I tried to restart but the problem persists...  Anyone has a solution, pleas?

  Hello, Craig2099!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your Notes application to close unexpectedly when you try to use it. I keep a lot of information in the Notes, so I know it's important to be able to access the app. I'd be happy to help you!

  I have some troubleshooting I suggest to go through. Before you start, I recommend you make a backup of your iPhone by following the instructions here: How to backup your iPhone, iPad and iPod touch

  Once your backup is created, go through the following steps, in order. Test after each step, stopping when the problem is resolved.

  1. Leaving the app all opened, as shown here:force a nearby application on your iPhone, iPad or iPod touch

     Then, restart your iPhone after this article: restart your iPad, iPhone or iPod touch

  2. Uninstall the Notes application, and then reinstall it. Instructions on how to do this can be found here: remove the apps Apple integrated from the home screen on your device iOS with iOS 10
  3. Reset settings on your iPhone in settings > general > reset > reset all settings. This will not delete your personal data (like contacts, photos, calendar of events, etc.), but he'll be back customizable settings (as your background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to the factory settings. It will also remove saved networks Wi - Fi and passwords, as well as all the VPN or APN settings used previously.
  4. Restore your iPhone settings by following the steps here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Then test Notes. If it works and not unexpectedly ends, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.

• uninstall the application Marketplace of Firefox on android

  I tried the Wikipedia app market on my 4.2.2 N4 android running. Cool app, but now I want to uninstall it. I can't figure out how. I have long pressed the app on my home screen icon and staged to 'eliminate', but just who took the icon to the home screen. I can't find the app in my app drawer or in the settings under apps > indtslled. However, I think that our is always installed, because the market goes on mobile Firefox, I see the words "launch" next to the application wherever I see 'install' next to other applications.

  Yes sorry, I just according to my instructions my comments in firefox beta & assumes that the steps would be just the same in the normal version of firefox.

  as you have already discovered, is not an entry in the menu to access applications installed in firefox for android yet - but you can however access by typing on: apps in the address bar & remove the apps downloaded from there.

• Is there a way I can restore my backup profile that I took from a folder (for example Settings\Application Data\Mozilla\Firefox\Profiles\)

  Before re-installing Firefox 19, I took by mistake backup my profile in a folder - C:\Documents and Settings\garan14\Local Settings\Application Data\Mozilla\Firefox\Profiles and not from C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles.

  When installing, I chose option "Delete old profiles" and I don't see any old folder under C:\Documents and Settings\garan14\Application Data\Mozilla\Firefox\Profiles profile.

  However, I have a lot of important data stored under that profile that has now been deleted.

  Is there a way I can restore the old profile data? (PS: as stated above, I have a backup of the profile folder that is located under the Local Settings folder)

  I'm in a desperate need for aid. Pls reply as soon as possible.

  Firefox stores only cache files to the location of the local settings and not the files in the main folder of the Firefox profile.
  
  There is no need to save this place in local contexts in any case.

  The main folder of the Firefox profile is in "C:\Documents and Settings\ < user > change Data" on Windows XP.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  If you have deleted your personal data during the uninstallation of Firefox and do not have a backup then your only option is to use an undelete utility to see if you can recover this profile folder.

  • Recuva: http://www.piriform.com/recuva

• When I try to type on the bar or crashes my firefox search engine. How can I fix? I can surf between sites, but when I try to type something blocking firefox.

  It was a typical day. I wake up and check my places as usual. But this weird problem started suddenly to crash my firefox. When I try to type google search box, firefox search box or bar firefox crashes to address. I use Kaspersky Pure and no sign of the virus. Can I visit the sites normally. Other computers in my house don't crash like this. I'll send this issue on my laptop.

  Create a new profile as a test to see if your profile is the source of the problems.

  See "basic troubleshooting: a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile, but make sure not to copy corrupted files.

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  See:

  • http://KB.mozillazine.org/Firefox_crashes
  • https://support.Mozilla.com/kb/Firefox+crashes
  • https://support.Mozilla.com/en-us/KB/latest-Firefox-issues

  If you have submitted incident Breakpad reports then validate the ID of one or more reports of incidents Breakpad (bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx). You can find the ID of the crash on the topic submitted reports: page crashes. You can open the topic: blocking the page through the address bar, you open a Web site.

  See:

  • http://KB.mozillazine.org/Breakpad (Mozilla Crash Reporter)
  • https://support.Mozilla.com/kb/Mozilla+Crash+Reporter
  • https://developer.Mozilla.org/en/How_to_get_a_stacktrace_for_a_bug_report

• My Reader on Mac application crashes as soon as I connect my PRS - T1 to the USB port.

  Because soon, I connect my PRS - T1 in USB and drive starts synchronization of the Reader (on my MAC) application crashes. It happens every time, and I can't sync books or anything like that.

  I updated the drive and reinstalled my reader app on my mac and the PRS - t1 is running the latest firmware.

  Here is the error I get:

  Process: Player [620]
  Path: /Applications/Reader.app/Contents/MacOS/Reader
  ID: com.sony.readerdesktop
  Version: 2.0.01 (2.0.01.11080)
  Code type: X 86 (native)
  Parent process: launchd [135]
  User ID: 501

  Date/time: 2013-04-01 19:22:06.945-0300
  OS version: Mac OS X 10.8.3 (12 D 78)
  Report Version: 10

  Interval since last report: 112286 sec
  Crashes since last report: 14
  Per-App interval since last report: 1586 sec
  Per-App crashes since last report: 14
  Anonymous UUID: FDDA6CCD-6286-7E55-B053-88F42028DB43

  Crashed thread: 14

  Exception type: EXC_BAD_ACCESS (SIGBUS)
  Exception codes: KERN_PROTECTION_FAILURE at 0 x 0000000000000000

  VM regions close to 0:
  --> __PAGEZERO 0000000000000000 0000000000001000 [4K]-/-SM = NO /Applications/Reader.app/Contents/MacOS/Reader
  __TEXT [15.4 M] 0000000000001000-0000000000f6f000 r-x/rwx SM = COW /Applications/Reader.app/Contents/MacOS/Reader

  Thread 0: Dispatch queue: com.apple.main - wire
  0 libsystem_kernel.dylib 0x9109c7d2 mach_msg_trap + 10
  1 libsystem_kernel.dylib 0x9109bcb0 mach_msg + 68
  2 com.apple.CoreGraphics 0x99016f98 _CGSSynchronizeWindowBackingStore + 131
  3 com.apple.CoreGraphics 0x98fc3569 _CGSLockWindow + 3142
  4 com.apple.CoreGraphics 0x98fc2742 CGSDeviceLock + 313
  5 libRIP.A.dylib 0 x 94114881 ripd_Lock + 62
  6 libRIP.A.dylib 0x9411434b ripl_BltShape + 451
  7 libRIP.A.dylib 0 x 94112446 ripc_Render + 389
  8 libRIP.A.dylib 0x9410e0c8 ripc_DrawRects + 546
  com.apple.CoreGraphics 9 0x98fbebcd CGContextFillRects + 144
  10 com.apple.CoreGraphics 0x98fdc75b CGContextFillRect + 32

  etc etc etc...

  Hi jaglaser,

  Perform the following troubleshooting steps and check if it helps.

  • Unplug the book digital computer drive and close the drive software. Once disconnected, remove all memory cards that may have installed in your player.
  
  
  • Reconnect the drive and test it for proper functioning. If you still experience the problem, proceed to the next step.
  
  
  • Unplug the book digital computer drive and the internal format of the memory of the digital book reader.
  
  
  • If the problem is still happening, turn off your digital book reader and do a Hard Reset (https://us.en.kb.sony.com/app/answers/detail/a_id/31628/c/65%2C66/kw/31628). After doing a Hard Reset, it will be necessary to authorize the device again.
  
  
  • If possible, install the drive on a different computer software to test.

  If my post answered your question, please mark it as an "accepted Solution".

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• Call any thread DLLs the application crashes

  I have a built in 2015-labview application that acquires spectra of 6 spectrometers via an external dll. The dll triggers an event in labview when data is ready to be pulled from the spectrometers. Since this event, I am running a reentry no void / vi which contains a node function to retrieve the data, that are configured to run in any thread, as it gives a drastic improvement of performance as apposed to run in the UI thread.

  However this can slow down the application crash with a message from windows like the following journal:

  Name of the failing application: axiom 2.0.exe, version: 1.0.0.82, time stamp: 0x5581a6b7
  The failed module name: lvrt.dll, version: 15.0.0.4024, time stamp: 0x5581ac03
  Exception code: 0xc0000005
  Offset: 0x0000000000bec7c0
  ID of the process failed: 0x15c0
  Start time of application vulnerabilities: 0x01d11e6face9febd
  The failing application path: C:\Axiom 2.0\builds\Axiom 2.0\Axiom 2.0.exe
  Path of the failing module: C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-Time\2015\lvrt.dll
  Report ID: 7d4ef3a8-8a91-11e5-94e9-90b11c894ef8

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  An example of the increase in performance, it's that I can query the spectrometer from 6 to 70-80 Hz when configured to run in any thread, as opposed to a simple 10 Hz when the Run value in the UI thread.

  Thank you

  Jimmy01 wrote:

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  Looks like that the DLL is not thread-safe. If you do not run in the UI thread, there is no guarantee that the DLL will be always called from the same thread, even if you only call it in one no reentrante Subvi. By default, LabVIEW allocates multiple threads by the enforcement system, with the exception of the user interface. If the DLL stores certain information of one call to the other, this context can be lost when run in a different thread.

  Here's a thread that provides two possible solutions; a wrapper DLL is required, use the other the utility 'threadconfig' (or the corresponding INI file settings) to force a subsystem of a thread executing unique http://forums.ni.com/t5/LabVIEW/Force-DLLs-to-tun-in-the-same-thread-expect-the-UI-Thread/td-p/11438...

  Another option would be to put the call to the DLL in a timed loop that runs constantly, and you can use a queue or the notifier to pass data to. A timed loop runs in a single dedicated thread, so I think it will work.

• LabVIEW application crashes when you exit a VI with one or several clients on remote control

  Hi all

  This is the question that I met with LabVIEW 8.2 and LabVIEW 8.6. I publish one of the screws dynamically launch my application as a Web page. Then I load the application and launch this dynamic VI and connect to this VI by using a web browser from a PC intranet. Then if I try to exit from VI when the client is still connected to it, the application crashes. Please see the attached picture.
  This behavior occurs randomly. Sometimes, everything works as expected when you exit the VI - the main screen of the application appears and in the client side, there is a "remote connection Panel is closed.
  What could be the reason for this?

  Thank you
  Luxama

  Oops... The method of 'Close links' to work correctly. I apologize for the error.

  Regarding the issue of application crash, I did this close relationship, then wait a few milliseconds and then quit the VI. Today, the application seems to work very well.

  In the meantime, I had another doubt. Is there a way to link to the application instead of a VI?

  Thank you
  Luxama

• VB6 application crashes while trying to print the microsoft word document using specific printers

  I use VB6 application to print MS word by loading all windows printers in my application. Regardless, I print a document or not when I load these printers in a screen and to cancel the screen, I get below RTE:

  Run-time error '-2147417848 (80010108) ';

  Automation error

  The object invoked has disconnected from its clients.

  Check the application event log and found the details below:

  The failing application name: PiMS.exe, version: 8.1.0.0, time stamp: 0x546042e2

  The failed module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521ea8e7

  Exception code: 0xc0000005

  Offset: 0x000330bd

  ID of the process failed: 0xa4c

  Start time of application vulnerabilities: 0x01d03a7c78674f73

  The failing application path: C:\Program Files (x86)\CSC\i.PM\PiMS.exe

  The failed module path: C:\Windows\SysWOW64\ntdll.dll

  Report ID: 61d95797-a670-11e4-9bf2-005056ab746a

  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: PiMS.exe

  P2: 8.1.0.0

  P3: 546042e2

  P4: ntdll.dll

  P5: 6.1.7601.18247

  P6: 521ea8e7

  P7: c0000005

  P8: 000330bd

  P9:

  P10:

  We believe that the run-time error can occur at different times as the corrupted print queue is default and its position in the list of printers. The error is caused by the HP Color LaserJet CM6040 MFP PCL6 print queue, because once we stopped to this printer via the mapping RDP session, the application crashed.

  How to solve this error.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.

• Whenever the browser opens, I get an error saying: "Explorer.exe" application crash

  Original title: I get an error saying: "Explorer.exe" application crash

  Whenever it opens explorer, I get the error below and it remains my explore

  I get the error message is the following:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: explorer.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01da5
  Fault Module name: StackHash_b61d
  Fault Module Version: 6.0.6002.18327
  Timestamp of Module error: 4cb73436
  Exception code: c0000374
  Exception offset: 000b06fc
  OS version: 6.0.6002.2.2.0.256.1
  Locale ID: 2057
  Additional information 1: b61d
  More information 2: 167a8c47623c2496d77676b17616bd5b
  3 more information: ae0a
  Additional information 4: 8785af56cd014fa3319b3e04d072db96

  Please let me know how I can solve this problem.

  Thank you

  Sam

  Hi Sam,

  Do you remember what makes any agreement, changes this question?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

   

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Embird embroidery application crashes

  Moose title: Accident of embroidery

  I try to open an add-in of the module to my embroidery software - it worked last week now the application crashes and I get the following message

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: 5dsketch.exe

  Application version: 9.2.0.0

  Application timestamp: 4cc6d20a

  Fault Module name: MSVCR90.dll

  Fault Module Version: 9.0.30729.4148

  Timestamp of Module error: 4a594c79

  Exception code: 40000015

  Exception offset: 0005bea4

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 2057

  Information additional 1: 277

  More information 2: d7a5c4cf9d14933046361b72aa03cd72

  Additional information 3: 8a2e

  Additional information 4: c8a01e7de4cadfaf87a74eea2e0180da

  The creators of the software are not yet able to tell me what to do

  Someone knows what's the problem?

  Hello

  ·         You try to uninstall and reinstall the application?

  I suggest you to uninstall and reinstall the Embird embroidery software and check if that helps resolve the issue.

  To uninstall a program in Windows Vista see the link below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  To install a program in Windows Vista see link below

  Install a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program

  You can also contact the Support of Embird for assistance.

  Check out the link for more information below.

  http://www.Embird.com/contact.htm

  Note:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• clock application crashing

  A few days ago I noticed that my default clock application crashed on my Sony Xperia Z3 Compact (model D5803, 23.0.A.2.98 Build Android). The app are crashing, even after cleaning RAM and restart the device. After the removal of the application files in the settings of the app seemed to work again. However, When you try to use the world clock (adding a new time zone) the application crashes again. This problem happened on the previous version of the software. I don't want to reset the whole device, so if there's someone out there with the same problem or ideas, I would be really grateful.

  uninstall both apps > restart your phone > check again.