WRE54G dead - no lights on

Similar Questions

• Satellite A300 is completely dead, no lights, no power at all

  I checked th AC and power cable adapter, but the unit does not power upward. There is no sign of it being connected to a power source.

  No light. The plug of the power cord plugs into is wiggle a little put the PIN is stable.
  Any suggestions?

  > Any suggestions?
  There must be a serious problem with electronic power (motherboard) so I guess there is nothing you can do about it. Bring it to the Toshiba service and ask for help.
  In such cases mainboard needs to be replaced, so it can be very expensive for you.

  Maybe it's time for the new laptop computer.

• NSLU2 Dead - no lights, power seems to be OK.

  Hi all

  My long in the tooth nslu2 (2006?) has abandoned - he was out of the network this morning and won't start at all.

  No light, no sound - nothing.

  Food seems to be dishing out about 5.3V - so I don't think that.

  What are my options?

  Thank you

  Tony Jewell

  Has taken apart - if two jumps of the electrolytic capacitors. All is well again.

  I hope that this is not part of electrolytic defective batch - if our slugs could be reached end of life.

  Before:

  After:

  

• My HP dv4-1145go is dead - no lights, no video, nothing.

  A few months ago my dv4 has stopped working. It is a device I want to make it work, in order to prevail on the TRIPS Agreement and use it for email and web browsing.

  My diagnostic skills are limited and a multimeter is the extent of my test. I don't want to spend money on the wrong parts, but I'm willing and able to replace the motherboard if it is the right solution. Given to nine are available on the Internet within my price range, which is around $100, as the machine is 5 or 6 years.

  Your experts can help me greatly in commenting and suggesting steps that I take to diagnose the problem. Here's what I've done to date.

  During the inspection, I first noticed that the power jack led was, so I traded the power adapter external with another one of HP brand and nothing has changed. I tried the power dv4 adapter, also with a label of HP, on my HP dv6700 and it worked correctly. So for now, I think my adapter is good.

  Then, I removed the motherboard from the folder and it inspected for burnt components or other signs of deterioration. Nothing is obviously broken or burned, but I found a "fist" full of dog hair that I removed the fan. Don't know if it was enough hair to stop the fan and the overheating of the device. I worry about the processor is damaged, but do not know how to check. Any comments on this issue will be greatly appreciated.

  To be on the safe side, I ordered a power supply and cable for a modest sum of money. He is yet to come, but seems to be a wise investment.

  That is the measure of my efforts, and I hope that an expert will take my fate to heart and make comments and suggestions to help me find the cause of failure of the laptop. Then, I can better decide on the right solution.

  Thank you.

  Thank you very much for the compliment and the suggestion to move forward. I'll do what you suggest. Look at this post for updates, but I can take the time in all this is done. Thanks again.

• Satellite A210-12U - no lights come on or anything like that

  I have a Satellite A210-12U who died on me. I wasn't doing anything special, just posting on a bulletin board, one just like this and the power died, almost as a power cut, without warning. It was plugged in at the time. And now it is completely dead, no light doesn't come on or anything like that. Power cord is fine, just like the battery because the two work very well on my L500-11N. I tried out the battery and the power cord, hold the power button for more than 30 seconds and the replacement, but he's still dead. Is there some sort of internal fuse?

  I thought it might be some sort of internal fuse, but have no idea if she has one, it is unlikely, if yes, can I change myself, and where can I find?

  Thanks in advance.

  Hey Buddy,

  I had a similar problem last year and I did the following steps:

  -Disconnect the battery and the AC adapter
  -Wait at least an hour or over night for example
  -Reconnect the two (battery and AC/DC adapter)
  -Try to start the laptop

  If that doesn t work, this seems to be a malfunction of the equipment. Maybe the card mother, AC/DC adapter or something else
  You should ask your local ASP help ;)

• Satellite L350 - no lights, won't start

  My satellite L350 does not start. He's been completely dead no lights nothing. He's going to the charger and the battery has power.

  Any help apreciated...

  Hey Buddy,

  I think I found something that might be interesting for you:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite P300/Q01 - buttons Mute & Media LED is dead.

  Hello, I am running on a P300/Q01. And recently my 2 LED buttons (media) are dead, they light up but when I press them nothing opens / mutes. He always runs the flicker thing however.

  My other keys such as Stop/Play/Next work correctly.

  I tried some solutions like the installation of VFR again, but that did nothing.

  Please help me, because this is my last resort.

  To be honest if fresh VAP installation didn't help all you can do is the last but radical solution install Vista using recovery DVD or HARD drive recovery option.

• HP Pavilion 15p189na: Mute light does not

  The led of the button mute on my HP Pavilion 15p189na does not work. I use Windows 10 64-bit operating system.

  BIOS Version/Date Insyde F.11, 08/07/2014

  Processor Intel Core i5-4288U CPU 2.60 GHz, 2601 Mhz, 2 Lossnay, 4 logical processors

  This light was absoloutely work very well, but one day it suddenly stopped working. Good news is that mute the button still works fine but the dead ID light.

  Your help will be much appreciated

  Hello

  Try to download and reinstall the software Realtek HD Audio package on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  During the re-Setup has completed, restart the laptop.

  Kind regards

  DP - K

• Reload Windows XP on Portege R100

  I have a R100, who does not start in Windows (XP) - gets etc. secure mode/last good on-screen, then dies. I was going to try to repair the Windows installation using a XP normal drive, rather than a full recovery of the product, as the back-ups have been exceeded, of course, and I need some files.

  Another problem, my external PC card drive of Toshiba (PA3246) seems to be dead - power light turns on, but door will not open and not recognized on any PC. It seems impossible to get a Toshiba PC card disk now, only USB.

  So, questions:
  (1) what is the probability to repair the Windows installation, as opposed to the full recovery of the product?
  (2) any thoughts on a failed external drive?
  (3) would be a R100 boot from a Windows CD via a USB connection, or no one knows source of suitable PC card reader (already tried ebay etc.)?

  Any help at all welcomed.

  Hello

  I see you have a lot of Guy question ;) I will try to provide the best answers and proposals of solution :)

  Then on the point:
  1. I don't see any other chances of recovering all of the operating system.
  If you need some files, you could first remove the HARD drive and it could connect to another computer via the external USB HDD controller.

  2. If the external PC card reader is dead, it will take a new :( Sorry, but I don't see any other possibilities for a fix.
  Perhaps that the guarantee is valid and you will get a new one for free

  3. If you want more details on the R100 and boot USB please check this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246
  Portege R100 does not support installation of the OS on the USB CD/DVD drive.
  Portege R100 supports the recovery of (16-bit and Cardbus) PCMCIA cards.

  Concerning

• Re: Equium A200-15i: Wireless stops working, so wireless adpater visible

  My netwrok A200-15i wireless stopped working by itself during the download.

  Internet works via ethernet. Wireless physical switch is on, but the indicator does not turn on. No wireless adapter appears in the "network adapters" in the system (only the Ethernet card is visible).

  During the installation of the Atheros driver, receive a message that the hardware is not connected.

  Help, please.

  Looks like the wireless card is dead the light that lights up with the switch is wired and not software driven.
  Even if it's very weird for the light to malfunction so there maybe a small chance of the card somehow has detached itself internally.
  I'm not familiar with the A200 I know that some earlier Toshiba models allow you access to the wifi cards since they are optional.
  For less hassle, buy a USB dongle or cardbus, but check online first that some brands good markets suffer from range and a poor performance.

  Richard S.

• firmware for the iPhone bluetooth headset original work with the 5s iPhone

  Hello to our community,

  I have a beautiful original apple iPhone Bluetooth Headset model n °: A1221

  This helmet does not work correctly.

  When I connect the headphones to the computer (iMac 27 "mid-2011, el Capitan 10.11.3) with the original Headset USB travel cable, headset LED is bright orange and the LED color changes to green after a few minutes.

  When I disconnect the headset no lights are bright and the headphones does not work.

  After charging more then 1 hour the same answer.

  When I put the headset with the USB cable connected in my ear, I can hear the sound signal very low volume of pitch high e. When I push and hold the button of the headset tone is stronger.

  When I disconnect the cable, the helmet is instantly dead, no lights, no sound, nothing happens when I push the button on the short headset, for a second, four seconds, 10 seconds or even longer.

  Is there a possibility to reset? A new firmware? An Exchange program? Any help?

  Max

  The helmet has been abandoned, I think that 2009. So, it's long after the warranty. BT headsets have come a long way since then. The Apple headset does support A2DP, now standard. I he write off and buy something current.

• Satellite 3000 - x 4: bad BIOS flashing of THE

  Hi there I called technical assistance on this topic and he completely waste and cannot even give the right numbers...

  Right my Sat 3000 - x 4 with incorrect Bios flashed and now have a laptop justshowing power dead - it lights but that on this subject. There is no screen and no evedece of life as we know it.

  Is there a fail safe module integrated into the system to let me create a boot disk, so I can reflash my system with the bios files correct or and I basically knackerd.

  What can I didsasemble the laptop and do a hotswap and reflash the system.

  any help would be apracted.

  of many thks mick

  Hello

  Looks like you used a bad version of BIOS update the BIOS on the device. Well, I put t know if you know but the wrong version or an incorrect BIOS update procedure may damage the motherboard. Also it is not possible to upgrade the BIOS for example 1.6 to 1.3 s.
  I recommend contacting the partner of service in your country, because only the ASP can install the BIOS again. Hope that the motherboard is not broken.

  Good bye

• Toshiba Satellite A215-A4757 black screen and unable to initialize

  Received the black screen after trying to download the update of the BIOS; has been logged in as administrator, but received the error 'need to be logged in as an administrator. Could not go further. Process had not begun restore point then minimized and tried to validate the connection as an administrator. Locked screen and got a black screen with errors about bad driver. Doesn't seem to be valid. In any case, I liquidated - power off. Does not power on f11 or any other key - cannot start. Keyboard seems dead. seeing lights to drive DVD could perhaps start with the startup disk. However, do not have (not too smart). Is there a way to get a system of information-based boot disk? I had a previous assignment but did not because months ago. Thanks for any help/suggestions.

  Perhaps your message to: http://forums.toshiba.com/?

• Strange marks on the screen

  Hello

  First of all thanks for this great forum find information on my new pre. I'm having a problem with 2 white spots my

  screen that I can't seem to come off. The strange thing is that I can see them only when certain colors are on the mainly blue screen.

  I just wanted to see if it was something I have to worry because I don't see them all the time.

  Thank you

  Cheese

  "I was told that there is a problem with LCD screens that can not be helped. My question is if it happen so fast? »

  Dead pixels (light or miscolored points or areas) are likely to occur sooner rather than later, because they are caused by a defect. These flaws are inherent in the process of putting electronic components individual 1 million on PRE screen.

  'Stuck' pixels (dead pixels) can appear at any time and can sometimes be fixed by flashing of the patterns of color on the screen. Once the SDK is released we'll probably see some apps for it immediately because they are simple.

• Pavillion G6 A1J18AV: What is the appropriate wireless card replacement

  Existing wireless adapter seems dead (wireless light remains orange and the wireless card does not appear in Device Manager).

  After reading the owner's manual, I chose one of the pieces of the table - 593127-001.  Unfortunately, when starting, I get the message "Unsupported Wireless Module".  Message contains ' ID of Module WLAN (702).  I chose precisely the part of the repair to avoid this problem, but of course I'm missing some information.

  How can I know what part is the correct replacement part?  I would have chosen the exact part that has been in the computer (639967-011), but it does not appear on the HP spare parts.

  Thank you

  -Kevin

  Hi, Kevin:

  That'd be the part, you have to get.

  IMO, it would be cheaper to get a card used but tested on eBay.

  http://www.eBay.com/Sch/i.html?_FROM=R40&_sacat=0&_nkw=639967-001&_sop=15