Similar Questions

• Insider source subscription. Could not retrieve the client certificate

  Hi all

  I created subscription source initiated between two Windows 2008 R2.

  The source (client) cannot connect to the server. Logs on the client:

  Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

  Authenticate the user using the Client certificate mechanism

  User authentication failed. The credentials did not work.

  Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

  WSMan enumeration operation failed, error code 5

  Opens a session on the server.

  Sending HTTP error to the client after a failure of transportation.
  The HTTP status code is 503
  The error code is 995

  Could not retrieve the client certificate

  Send the HTTP 401 response to the client and disconnect the connection after sending the answer

  The user authorization failed with error 5Authorizing the user

  Authentication using client certificate with the client.corp.domain.com object is successfully

  How to fix the error "unable to retrieve the client certificate?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• ADFDI-05577: could not retrieve the data table on the server.

  Dear all,
  
  My use case is, when I opened my excellent work book, I have this error message is out ' ADFDI-05577: could not retrieve the data table on the server line "and when I click on the button 'OK' of the error message I can recover all the data on the server. Please help me how to solve this error?
  
  
  Concerning
  KT

  Thanks much Sireesha Pinninti, John Stegeman, Arun.

  Yes, my problem is of subquery. I found a solution from this site.
  http://www.DBA-Oracle.com/t_ora_01427_single_row_subquery_returns_more_than_one_row.htm,
  http://srinisboulevard.blogspot.com/2010/04/ora-01427-single-row-subquery-returns.html
  http://StackOverflow.com/questions/3804850/erroneous-ora-01427-single-row-subquery-returns-more-than-one-row / / the answer is the last line

  Before change (error subquery)

  CheckingEO.BO,
  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO) NTR_NO
  To archive the CheckingEO

  Edit it like this

  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO and Rownum = 1) NTR_NO
  To archive the CheckingEO

  Concerning
  KT

  Published by: KT on 23 May 2012 15:35

  Published by: KT on 23 May 2012 15:48

• Message "files were imported not because they could not be read" when importing from an SD card

  I use CC/creation of Lightroom clouds for several months now and no problems. All of a sudden I get a message saying that the file I am trying to import my SD card could not be read, so I'm unable to import new photos in my catalog. I was importing images using the same SD card and the camera without any problems in the past. I use Mac OS X El Capitan. Any ideas? Thank you.

  The most common cause of this error is a lack of privs to WRITING on the destination folder. Using the Finder, make sure that you have READ and WRITE privs on your destination folder tree.

• Error 'could not be read' when importing into LR5

  Import problem

  5 Lightroom

  Mac OS X 10.8.4

  Try to import files from CF card CR2 - files appear on the screen to import but then won't matter

  "Import results.

  Some import operations were not performed.

  The following files were not imported because they could not be read (1):... »

  And it then lists all THE files on CF card

  I tried to copy the CR2 files to a temporary folder on my desktop but get exactly the same message. Also tried to import pictures from iPhone and get exactly the same message.

  It worked for the first week LR5 was installed and has just started to happen after a week

  Have no problem at all with 4.4 Lightroom

  Title of the message was edited by: Brett N

  Thanks for the file. I was able to import without problem. This means that the file is not the source of the problem, but not Lightroom itself. There is something to do on your side that preventing things from work.

  Generally, when things work at first and then suddenly stop working, the problem is with the files preference. These tell Lightroom how to behave and if something goes wrong with them, he tells the program to behave in a way that causes errors.

  We want to recreate the preferences file. Just delete, rename, or move the file so that Lightroom is closed and then reopen. Launch Lightroom attempts to read this file for instructions, if it does not there a new is created with all the default settings.

  This is where the file is stored:

  Preference and other locations of files in Lightroom 5

• Could not retrieve e-mail messages in Outlook Express. Server not found, Error 0x800ccc0d #.

  original title: trouble getting email

  having problems to make my email in outlook express and told me the Server of pop.secure hote.net could not be found and the error # 11004 is Error 0x800ccc0d #.

  having problems to make my email in outlook express and told me the Server of pop.secure hote.net could not be found and the error # 11004 is Error 0x800ccc0d #.

  You must set the name of the POP3 server correctly in the configuration of Outlook Express. Ask your provider which is the correct server name.

• Try to install Windows 7 from XP, receive the error message "Windows could not retrieve information about the disks on this computer.

  Try installing Windows 7 from XP and keep having this error message before choosing my instalation method, Windows not able to retrieve information about the disks on this computer.

  Because the migration from Windows XP to Windows 7 requires a clean install anyway, might as well you are backing up your important files and settings using Windows Easy Transfer and do a custom clean install by booting from the Windows 7 DVD.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Selection of approval tasks using adapters-could not retrieve the information of the user

  Hello
  I created the reconciliation of flat file (IOM 9.1) users. According to the requirement, approval must be provided before users are provisioned to Active Directory, using the 2 conditions.
  If the user is in the "Executive", level 2 approval is required so that if the user is the "Senior" position, single approval.
  The field to distinguish the condition is 'Position' defined in the UDF. I have created an approval process for Active Directory with level 2 approvals already.
  I created an adapter that checks the position of the user and returns responses. I use this adapter in a task to "check the Position of the user. This task above the 2 'immediate head' approvals and approvals for 'second level '.
  Depending on the response, the trust levels are supposed to be selected.
  
  But when I'm trying to retrieve the position of the user into the adapter using the key of the user (usrKey), the value of usrKey spending like '1' (xelsysadm key) instead of the user key which I created through reconciliation flat file. What could be the reason for this? Need your help guys.

  Mary,

  Is a correct method for OIM9.1

  tcResultSet requestResultSet = (newRequestKey) tcrequestIntf.getRequestTargets;

  Please import import Thor.API.Operations.tcRequestOperationsIntf;

  Thank you
  Hemant

  Published by: Hemant-IOM on November 2, 2012 03:08

• [redacted] Pavilion v208tx: we could not retrieve the list of drivers for your product. Please select the desired operatin

  I can't find drivers... tried to reload the page for a bunch of times... quiting browser and re open... I pressed the bunch of times update I tried different OS and it still saying "we couldn't retrieve the list of drivers for your product.  Please select the operating system"oh and he

  Hello

  Thanks for posting in the HP Support forum.

  It seems it was some website temporary glitch - it works for me now.  Could you try again?

  

• DeskJet 3050 J610a: We could not retrieve the list of drivers for your product (3050 J610a)

  I have the HP Deskjet 3050 J610a. Printer worked fine on my machine Win 8.1. Just got reimagee to the same machine (Win 8.1) and had to reload my drivers for the printer. Site displays the following message when I select 3050 J610a with Windows OS. I can't add the printer to the computer as pilot given result is not available... was here last year.

  Anyone has a suggestion. My other computer on Win 10 works and driver is available.

  We were able to retrieve the list of drivers for your product.  Please select the desired operating system and select "Update" for a new attempt

  Hello

  It is still there:

  http://ftp.HP.com/pub/softlib/software12/COL34584/al-109394-3/DJ3050_J610_1315-1.exe

  A quick victory is first install it on your computer. Please download and install on your machine.

  Kind regards.

• Pavilion dm1-z3000: could not retrieve error

  Hello

  Im having bad to recover.

  My hard drive has shown (301) error, then I replaced with a new one and now I can't install windows using the recovery media that I created. 5 DVD using HP recovery in the system when I bought it.

  Now it is showing an error "the target drive is not connected", but I connected the hard drive correctly I think.

  So could you guyz pls help me to solve this problem.

  Thank you very much in advance.

  

  What kind of car did replace the failure with?

  2.2 TB of hard drives are not recognized by the BIOS of the former generation notebooks.

  Disc SSD or hybrid must sometimes be prepared with manufacturers or Windows DiskPart utility.

  You can connect the new drive temporarily to another PC of Windows and use the DiskPart utility to initialize the disk.

  

• VCAC6 error: could not retrieve upnSuffixes in AD on Ldap provider

  Hello

  I had sent a new VCAC 6.0.1 environment and I get a lot of error to /var/log/vmware/sso/vmware-sts-idmd.log who speaks of "Impossible to extract the upnSuffixes in Ldap AD Over provider."

  [2014-08-01 16:09, 453 05180a84-03a1-4771-9c80-148a8cbe3c6d demo ERROR] [LdapWithAdMappingsProvider] Failed to retrieve the upnSuffixes in demo.test.local provider Ldap AD Over

  java.security.InvalidParameterException: Null or empty values

  at com.vmware.identity.idm.server.provider.BaseLdapProvider.getStringValues(BaseLdapProvider.java:238)

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.getAlterUpnSuffixes(LdapWithAdMappingsProvider.java:233)

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.getRegisteredUpnSuffixes(LdapWithAdMappingsProvider.java:283)

  at com.vmware.identity.idm.server.provider.BaseLdapProvider.normalizeAliasInPrincipal(BaseLdapProvider.java:363)

  at com.vmware.identity.idm.server.provider.ldap.LdapWithAdMappingsProvider.authenticate(LdapWithAdMappingsProvider.java:304)

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:2420)

  at com.vmware.identity.idm.server.IdentityManager.authenticate(IdentityManager.java:7907)

  at sun.reflect.GeneratedMethodAccessor91.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  to sun.rmi.transport.Transport$ 1.run (unknown Source)

  at java.security.AccessController.doPrivileged (Native Method)

  at sun.rmi.transport.Transport.serviceCall (unknown Source)

  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run0 (unknown Source)

  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown Source)

  at java.util.concurrent.ThreadPoolExecutor.runWorker (unknown Source)

  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (unknown Source)

  at java.lang.Thread.run (unknown Source)

  I don't know is this a normal behavior? I have no doubt but I wanted to know, otherwise what would probably get bad around here...

  Thanks in advance!

  BR,

  MG

  I could solve the problem by changing the Port for LDAP 389 to Global Catalog Port 3268. This error was to come with the child trusted user in the main domain member. Since I changed the GC port, I'm no more have these errors.

  Thank you

  BR,

  MG

• Installation Failed - could not retrieve the files. Press Retry to download again or contact customer support (EX20)

  New to CC

  I tried to install several times and even rebooted and tried again before running any other thing, all to nothing done.

  I have a local administrator on this laptop computer company account, and everything has installed very well so far.

  Any ideas?

  Dear Rob

  Please try to download ExMan this link instead of by CC Desktop App: http://www.adobe.com/exchange/em_download/index.html

  Let us know if it helps? If this isn't the case, please try in safe mode. It could just be a software anti-virus do not recognize our named installs files and their blocking.