VCAC6 error: could not retrieve upnSuffixes in AD on Ldap provider

Similar Questions

• When you try to upgrade Windows Vista to Windows 7 I get this error: "Windows could not retrieve information about the disks on this computer."

  original title: problems of Windows update/upgrade

  I'm currently trying to install Windows 7 on my desktop running Vista.

  Whenever I run the Setup it comes up with the following error: Windows could not retrieve information about the disks on this computer.
  I already put the virtual disk on auto and rebooted several times. I get the same error.
  Also, I tried to update my computer by using the windows update thinking that would help... Windows update decides to not work either! It comes up with the error: Windows Update cannot currently check the updates, because the service is not running. You may have to restart your computer.
  gain, I restarted and it still does not work.
  I am currently running Windows Vista 32 bit on my desk (I thank God for my laptop!).

  Help!

  First, run Windows 7 upgrade advisor:

  Windows 7 Upgrade Advisor
  http://Windows.Microsoft.com/UpgradeAdvisor

  Note the results and make sure to follow the steps.

  Try to install Windows 7 using the USB

  Install Windows 7 with a USB memory key
  http://www.winsupersite.com/article/Windows-7/install-Windows-7-with-a-USB-memory-key

• Insider source subscription. Could not retrieve the client certificate

  Hi all

  I created subscription source initiated between two Windows 2008 R2.

  The source (client) cannot connect to the server. Logs on the client:

  Send the request for operation to the destination machine enumeration and the server.corp.domain.com:5986 port

  Authenticate the user using the Client certificate mechanism

  User authentication failed. The credentials did not work.

  Has received the answer of the layer network; status: 401 (HTTP_STATUS_DENIED)

  WSMan enumeration operation failed, error code 5

  Opens a session on the server.

  Sending HTTP error to the client after a failure of transportation.
  The HTTP status code is 503
  The error code is 995

  Could not retrieve the client certificate

  Send the HTTP 401 response to the client and disconnect the connection after sending the answer

  The user authorization failed with error 5Authorizing the user

  Authentication using client certificate with the client.corp.domain.com object is successfully

  How to fix the error "unable to retrieve the client certificate?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  Impossible to analyze the xml.aspx contained in the main.js.Iam get the following error"could not obtain XML document, and the connection has failed: status 500

  My main.js resembles

  xmlDataSource var = {}
   
  URL: 'dcds. - symbianxml.aspx", etc. (sample).
   
  init: function() {}
  URL, successful reminder, the reminder of failure
  This.Connect (this.) (URL, this.responseHandler, this.failureHandler);
  },
   
  /**
  * Analyzes the XML document in an array of JS objects
  @param xmlDoc XML Document
  * @returns {table} array of objects of the device
  */
  parseResponse: {function (xmlDoc)}
      
  var chElements = xmlDoc.getElementsByTagName ("channel");
     
  channels of var = [];
    
  Console.log (chElements.Length);
    
  for (var i = 0; i)< chelements.length;="">
      
  var channel = {};
     
  for (var j = 0; j)< chelements[i].childnodes.length;="">
      
  var node = Sublst.ChildNodes(1).ChildNodes(0) chElements [i] [j];
              
  If (node.nodeType! = 1) {//not an element node}
  continue;
  }
         
  Channel [node. TagName] = node.textContent;
  }
     
  Channels.push (Channel);
  }
  Console.log (Channels.Length);
  return the strings;
  },
   
  /**
  Manages the response and displays the data from device web app
  @param xmlDoc
  */
  responseHandler: {function (xmlDoc)}
    
  var channel = this.parseResponse (xmlDoc);
  var markup = "";
     
  for (i = 0; i< channels.length;="">
     
  markup += this.generateHTMLMarkup (i, channels [i]);
  }
  document.getElementById("accordian").innerHTML = mark-up;
  },
   
  /**
  Generates HTML tags to insert in to the DOM Web App.
  * @index i, index of the device
  @param device, device object
  */
  /*
  generateHTMLMarkup: function (i, channel) {}
    
  var str ="";
  "Str += '.

  
  ' onclick =-"mwl.setGroupTarget ('#accordian ',' #items_" + i + "', 'ui-show ',' ui - hide');" + ".
  "mwl.setGroupTarget ('#accordian ',' item_title_ #" + i + "', 'ui-open', 'ui-farm'); Returns false; \ » > » ;
  "" Str += "" + channel ['name'] + ' ";
  "Str += '.
  ";
  "Str += '.

  ";
  "Str += '.

  "+" id: "+ channel ['id'] +" ' "

  ";
  "Str += '.

  "+" type: "+ channel ['type'] +" ' "

  ";
  "Str += '.

  "+" language: "+ channel ['language'] +" ' "

  ";
  "Str += '.

  «+ "bandwidth:" + "fast" channel + "»»

  ";
  "Str += '.

  "+" cellnapid: "+ channel ["cellnapid"] +". "

  ";
  "Str += '.

  «+ ' link: '+'start the video »»

  ";
  "Str += '.
  ";
  return str;
  },*/
  generateHTMLMarkup: function (i, channel) {}
     
  var str ="";
  "Str += '.
  ";
  str +=  "" +
  "" + channel ['name'] + ""+""
  ";
  "Str += '.
  «+ ' link: '+'start the video »»
  ";
       
  return str;

  },
   
  failureHandler: {function (reason)}
  document.getElementById("accordian").innerHTML = "could not get XML document.
  '+ reason;
  },
   
  /**
  Retrieves a resource XML in the given URL using XMLHttpRequest.
  @param url URL of the XML resource to retrieve
  @param called successCb, in the XML resourece is recovered successfully. Retrieved XML document is passed as an argument.
  @param failCb called, if something goes wrong. Reasons, in text format, is passed as an argument.
  */

  Connect: {function (url, successCb, failCb)
    
  var XMLHTTP = new XMLHttpRequest();
    
  XMLHTTP. Open ("GET", url, true);

  xmlhttp.setRequestHeader("Accept","text/xml,application/xml");
  xmlhttp.setRequestHeader ("Cache-Control", "non-cache");
  xmlhttp.setRequestHeader ("Pragma", "non-cache" "");
    
  var that = this;
  XMLHTTP.onreadystatechange = function() {}
     
  If (xmlhttp.readyState == 4) {}
      
  If (XMLHTTP. Status == 200) {}
       
  {if (!) XMLHTTP.responseXML)}
  try {}
  If server has not responded with good an XML MIME type.
  var domParser = new DOMParser();
  var xmlDoc = domParser.parseFromString(xmlhttp.responseText,"text/xml");
         
  successCb.call (that, xmlDoc);
         
  } catch (e) {}
  failCb.call (, "answer was not in an XML format.");
  }
            
  } else {}
  successCb.call (that, xmlhttp.responseXML);
  }
  } else {}
  failCb.call (this, "connection failed: status"+ xmlhttp.status ");
  }
  }
  };
  XMLHTTP. Send();
  }
  };

  Please see the content in main.js is fully analyzed.

  Forward for the solution to my request all members of the community...

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Wrestling: could not retrieve wsdl wsdl import

  Hello, I use JDeveloper 11.1.1.17 and configure a capture in a BEPL for a web service.

  The web service itself works, and the composite that calls the web service correctly.  Now, I'm trying to configure the capture for the web service.  I create the capture, and then double-click on it to get the GUI for configuration.

  I click on the magnifying glass to open the window "Fault Chooser".  I click on the partner links, then the service and the WSDL 'imported' for the service.  This exposes an error message: Exception: could not retrieve wsdl wsdl import

  Given that the web service calls a service on a remote server (within my organization, however), I tried to recreate the web service call, and the second time specified that he "copythe WSDL and its dependent artifacts in the project" to see if this would allow the capture to 'capture' the wsdl.

  This isn't.  The wsdl is listed in the wsdl for the project files, but each project wsdl file does not display the necessary information.

  Does anyone know if I am doing something wrong?

  Points awarded vigorously!

  Stuart

  You must select "copythe WSDL and its dependent artifacts in the project" in each project.

• ADFDI-05577: could not retrieve the data table on the server.

  Dear all,
  
  My use case is, when I opened my excellent work book, I have this error message is out ' ADFDI-05577: could not retrieve the data table on the server line "and when I click on the button 'OK' of the error message I can recover all the data on the server. Please help me how to solve this error?
  
  
  Concerning
  KT

  Thanks much Sireesha Pinninti, John Stegeman, Arun.

  Yes, my problem is of subquery. I found a solution from this site.
  http://www.DBA-Oracle.com/t_ora_01427_single_row_subquery_returns_more_than_one_row.htm,
  http://srinisboulevard.blogspot.com/2010/04/ora-01427-single-row-subquery-returns.html
  http://StackOverflow.com/questions/3804850/erroneous-ora-01427-single-row-subquery-returns-more-than-one-row / / the answer is the last line

  Before change (error subquery)

  CheckingEO.BO,
  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO) NTR_NO
  To archive the CheckingEO

  Edit it like this

  (SELECT ntr_no FROM test
  WHERE cs_no = CheckingEO.CS_NO and Rownum = 1) NTR_NO
  To archive the CheckingEO

  Concerning
  KT

  Published by: KT on 23 May 2012 15:35

  Published by: KT on 23 May 2012 15:48

• I can't reinstall firefox, I get the error 'Could not load profile' and not a solution I found works. / Appdata/roaming/mozilla folder is not accessible.

  I'm on Win7 64 bit. Initially, I uninstalled because a program has changed my page of the new tab to something unwanted and I literally had no way to change this back. Now, every time I reinstall, I get the error "cannot load the profile, it may be missing or unreachable", and I can't create a new profile. Whenever I try to any method of opening the profile editor, I get the error 'Could not load profile' then too. I can't access the folder in/appdata/roaming/mozilla at all. It is said it is accessable and access is denied, and tries to remove it tells me I have not permission (even if I'm the admin). No other difficulty I saw worked. Can someone help, please?

  I have done a virus scan, cleaned up one piece of adware, rebooted, and it worked all of a sudden. I don't know what exactly caused to start working, but he did, so I consider this issue closed.

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• Whenever I run Firefox, it appears an error message indicating "Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist." Contact the author to this problem. »

  Firefox could not install this point because 'install.rdf' (provided by the element) is incorrect or does not exist. Contact the author to this problem.

  The above statement is in the box pop up error every time, when I run Firefox. If I click on ok in the box of Firefox opens. How can I solve this problem of initialization/launch?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite U405 - S2833 Fingerprint error: could not open the sensor

  Hello, I am very new to the forums so I apologize in advance if I don't give all the necessary accurate information in this thread.

  I have a Toshiba U405-S2833 and it came with the TrueSuite Access Fingerprint Software.

  I downloaded an update a few days ago, but I don't remember if it's for Vista or Toshiba. Since then, my fingerprints were all removed from the system, and when I try re - save, I get this error message "error: could not open the sensor" I can't find the material to fix the sensor manually without going through the TrueSuite software.

  Any help would be greatly appreciated.
  Thanks in advance

  I am also having the same problem.

  My boss uses a Satellite U405-2628 fingerprinting and with the sensor TrueSuite Access Manager. It worked fine, then I updated windows and it has stopped working. I was on the updates and noticed an update of TrueSuite and thought that maybe that was messed up things.

  Then there were other issues that went past me locked out of the machine (anti-virus and loss of relationship with the field... also my fault). So I decided to wipe the machine and install fresh Vista.

  I installed everything but the TrueSuite software still not able to open the sensor. After hitting my head on it, I decided enough was enough and I restored it using Toshiba recovery disks.

  It took a few hours and here I am logged in as administrator and the TrueSuite software still cannot open the sensor. I don't know what I can do, since it is to return to the factory settings.

  As the above poster said, HELP!

  Thank you.

  ... a little later...

  Well, I managed to do work, and this can be useful for some people out there since I found no easy answers. I can't guarantee anything, and it's really complicated... so here go us.

  First, I downloaded the latest update from Toshiba (util_fingerprint_27460A.exe) and nothing has worked.
  Then I uninstalled the sensor since (click right, uninstalled) Device Manager to uninstall the driver as well (it should invite you to do so)
  Then, still in the Device Manager, I scanned for new hardware and it came with my sensor. I said to look for drivers and when he could not find, I think it gave me an option for windows search for an answer... or something like that. He came back with a link to Authentec (www.authentec.com/win7update/w7wbf32.exe, I think). So I downloaded that and installed. He rose through the device under "Biometric devices" then before... I think it's under the "Personall security device" or something like that. But alas, still no luck. So I uninstalled all the device from the Device Manager (taking care of uninstalling the driver as well) and of the TrueSuite software. Then came the break I was looking for.

  Online research I came across this page... http://members.driverguide.com/driver/detail.php?action=download&driverid=1194755. I had the chance before to DriverGuide.com so I thought what the heck. It is a driver of HP for the same sensor and it is dated 2006. So I downloaded and installed. Still nothing...

  Disgusted, I thought, well let's try to install util_fingerprint_27460A.exe on top of that. So I did, restarted and I couldn't believe my eyes when he said to connect and register fingerprints not seriously. And so I did. I hope this helps people, I don't really know how the sensor I so messed up, but I'm glad it worked.

  Yet one thing... and this may be important. When I took TrueSuite first after doing all this, he told me that the storage of fingerprints was full... or something in that sense. So I clicked the button remove all traces of fingers button and it I would like to register my fingerprints. I'm starting to wonder if that was all I had to do in the first place... Guess I'll never know.

  Good luck.

  Post edited by: rewind22x

• error: could not write the destination file (1 003)

  I am trying to export 40 photos of Photos.  I just installed OX El Capitan.  Only 13 of them get downloadable.  For the rest, I get this message: error: could not write the destination file (1 003)

  I tried to manually fix the library but still does not work (command + option + opening photos).

  And I do not have a backup on icloud photo library I have a backup on an external drive...

  You try to export the originals of your photos or revised versions?

  When you try to export photos to?

  You try to export to a folder on your system drive or a folder on an external drive?  If an external drive, which is the file system? And how the player is connected?

  You have permissions to write to the folder, when you export to?

• Darwin/BSD connection error: could not check hide

  Hello world

  I use OS X 10.6 (sorry, could not get the exact version that I couldn't start my iMac in all), my iTunes or other apps like Skype freeze every time at startup. I found an article that fixed this kind of issue by finding the "defective" or files using the activity monitor--> by clicking on "Inspect" on iTunes, looking at opening files/ports and the latter would be the "guilty", in this case, I noticed that apps froze every time when the file "audit_user" appeared. At that time I didn't know it is a crucial issue and I've moved the file to the Recycle Bin, was not able to clear the tray even though, as he was still "to used.

  Then when I rebooted my Mac, the Darwin/BSD login screen appeared, I typed in my username and password but failed due to the error 'could not hide audit\n', so it is perhaps as a result of move me the file to the Recycle Bin (which is still there, I think that).

  Can someone show me how to solve this problem? I tried to restart using single-user safe mood and it seems that the drive is OK.

  Help, please! Thank you very much!

  Sorry for typo's fault, the error message was actually "not usher audit mask\n".

  Tried to take my machine for maintenance in the local store but they have mentioned that this is a vintage unit, so could not help more

  Grateful if someone could help me on this, thank you!

• LabVIEW code 3 error: could not load façade.

  Hello

  I was the second time the "LabVIEW code 3 error: could not load before sign.» When you use the development of LabVIEW 2009 SP1 environment.

  It's really annoying that I waste time as I have to go back to previously saved code.

  Does anyone know where it comes from and how to avoid it?

  Thank you

  Pawel

  Pawel,

  If the façade is damaged, there is little that we can really do about it. So the best thing is to make sure that the front will never get corrupted at all.

  You can write a small VI using VI Server to check the position of the element in your VI. If there is way to positions of reposition before saving the VI.

  Another reason could be much, duplication of controls (including the faulty XControls?)...

  hope this helps,

  Norbert