Write common spreadsheet files in the path dialog

Similar Questions

• Since the last nights update I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Since update of last nights, I get now launching explorer.exe "windows cannot access the specified device, file, or the path?

  Hi Jemd3,

  I suggest you to completely remove Norton of the system using Norton Removal Tool and check if the problem persists.

  Method 1:

  Maybe it's that your computer is affected by virus and malware. I suggest you run an online anti-virus scan and a scan for Malware. See the links below.

  Microsoft OneCare:

  http://OneCare.live.com/standard/EN-US/3/default.htm

  Malicious software removal tool

  http://www.Microsoft.com/security/malwareremove/default.aspx

  Get a free PC safety scan

  http://OneCare.live.com/site/en-us/default.htm

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• How to display the name of file or the path of the photos on my screensaver when the value for 'My images' using Vista?

  I simply marked the box in 'settings' of the screen saver under Windows XP, but Vista does not display this option!

  When an image appears on my screen saver, I want to find it among the thousands of photos by reading the name of the file or the path at the top of the screen.

  Hello

  This screensaver Vista version doesn't have this option.

  The feature is now part of the Windows Live Photo Gallery.  You can go to http://get.live.com to download the program.  .

• Cannot open programs and files error: windows cannot access the file or the path of the specified unit. you don't have the appropriate permissions to access the item

  Original title: Search programs and files will not let me

  I get no response from the search - when I hit to see more results I request = aa indicating that windows cannot access the file or the path of the specified unit.  you don't have the appropriate permissions to access the item

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2 when was the last time it was working fine?

  3 are you facing this problem only with Web sites or other sites also?

  I suggest you try the steps below and check if it helps

  Step 1:
  Try to start the computer in safe mode with network and check if the same error message, here is the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2:
  However, to work around the problem, try the step below:

  a. right click on the program file, select Properties.

  b. on the general tab, at the bottom, you will see listed in the issue of safety: this file came from another computer and might be blocked to help protect this computer.

  c. unlock.

  d. click on apply.
  e. click OK.

  Hope this information is useful.

• Add all files in the path when creating file folio in Folio Builder

  Hello everyone.

  I'm using InDesign CS 5 and the creation of folio for iPad 2. My Folio builder was working fine until last week, but all of a sudden I see a change in the way it behaves. When I update the files in the Folio Builder, it adds all the files in the path of access (not only the links in the file), including source of PSD files and other related files that I have never used in InDesign, do folio file will increase in size. Can someone help me please how do I remedy this situation?

  I thank you very much in advance.

  I look forward to your solution.

  You have an HTML file in there? If so, put it (as well as its assets) in its own folder.

  Bob

• Extract the file to the path

  I'm working on a project which seeks to this folder a file is in before determining what function to perform.  Currently I use nomchemin var = decodeURI (app.activeDocument.path.name); to extract the immediate folder the file is located in, but in some cases, I need to retrieve the name of a folder of that one.  For example, currently gets 1\ C:\Texture Sets\LibraryLarge Format and returns the 'Large Format' folder to the path variable, because the file that I work with is located in this folder.  What I need is a way to check for 'Library 1' in the same way using the same file.  Thanks for any help!

  dgolberg

  You can use...

  var parentFolder = decodeURI(app.activeDocument.parent.parent.name);
  alert(parentFolder);
  

• How to read and write a text file to the folder of the user preferences?

  I'm trying to code for the user to record the plug-in, the first time that the user opens Acrobat after you have installed the plug-in. I want to write a file of registration of preference of the user folder access later to check that they are already registered.

  Is there an easy way to do this? I wrote the code to access the preference of the user folder to search for the file, but I have not been able to code for the write file. All I've found is how to write a PDF file.

  Any suggestions?

  Gregory

  ASFileRead/ASFileWrite

• Write to a file on the network share

  Hello
  
  I want to read a windows network share file and rewrite the transformed in sharing output. The share has read and write permissions for everyone.
  
  I can read and write to files on the oracle server, but I am unable to do it on a network share.
  Can someone please help?
  
  Here is my code.
  
  CREATE or replace DIRECTORY ext_tab_dir AS ' \ < ip > \My_Shares';
  
  GRANT READ, WRITE on DIRECTORY ext_tab_dir Scott;
  
  declare
  f utl_file.file_type;
  s varchar2 (200);
  Start
  f: = utl_file.fopen('EXT_TAB_DIR','sample1.txt','W');
  UTL_FILE.put_line (f, 'Test');
  UTL_FILE.fclose (f);
  dbms_output.put_line (s);
  end;
  /
  
  Published by: abdou on September 24, 2009 08:58

  p.s. check out the last section of this site...

  http://www.jlcomp.demon.co.UK/FAQ/UTL_FILE.html

  (the section called "sharing Windows and mapped drives")

  It may be due to your problem (keep in mind the article is old, but the concept should be similar)

• How many channels can I write to a file with the data Module write (Dasylab 12.00.00)?

  I would like to write data from a large number of channels (up to 128) in the same file. Thanks to the write data module, I have up to 16 channels only! The only solution I found is to save data in different files 8... Is there a solution for this problem? I use DASYLAB V.12.00.00. Thank you

  You can use the multiplexer unit, this will allow you to compress the 16 channels in 1 which saves up to 256 channels in a single file.

  In the module of the file to write, you can then select options and, under the "input Type", select the values of mixed singles.  You will then need to define how many channels in each entry will receive.

• Can't install downloaded software, receive the message error "Windows cannot access the specified device, file, or the path"

  Cannot install any software downloaded - says "Windows cannot access the specified device, path or file.  You can not have the appropriate permissions to access the item.  This happened after I went on a bad site and downloaded something accidentally and I was not able to do anything after that.  I have avast and avast kept popping up saying I've made to a site with malware and that it would interrupt - well these pop - ups have ceased and I was scanning my computer using windows defender (which did not find anything) - but I still have problems on my computer. Should what steps I take?

  Hello

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

• error message "Windows cannot access the specified device, file, or the path."

  Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

  Hi nanditaberi,

  Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

  This problem may be caused by this security software on the computer, uninstall them might solve the problem.

  Example: AVG, Zone Alarm

  Important:

  O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

  Ø you may need to check with the manufacturer of security software for reinstallation and activation.

  O re - install the security software on the computer.

  Reference:

  Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

  A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No files on the path

  Hi Forum,

  I'm conversion IDML INDD in specific paths of po and THE folders, my JS opens several files only, but not saved to file

  Please can we fix my error

  My JS:

  checkDocLen()

  var myDoc.

  var mySourceFolder = Folder("/Volumes/User/Desktop/IN");

  var myOutFolder = Folder("/Volumes/User/Desktop/OUT");

  var Idml_files is get_File (mySourceFolder, [], '.idml');.

  If (Idml_files. Length > 0)

  {

  for (var w = 0; l < Idml_files.length; ++ w)

  {

  try {}

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;

  myDoc = app.open (File (Idml_files [w]));

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;

  var myDocNam = stripExt (replace (Idml_files [w] .name) (/ % 20/g, "")) + "co-operate".

  myDoc.save (File(myOutFolder+"/"+myDocNam));

  app.activeDocument.close ();

  } catch (E) {}

  }

  }

  //---------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ------------------------------

  function get_File (dir, myfile_arr, extension)

  {

  var f =. getFiles() record (dir);

  for (ifil var = 0; ifil < f.length; ifil ++)

  {

  "" var mystr = f [ifil] + ' ";

  var aa = mystr.match (/ \ / [.]) AppleDouble /)

  var bb=mystr.match(/[_]VUC69~7/)

  var cc=mystr.match(/DS[_]Store/)

  If (f [ifil] instanceof file) //change

  {

  If ((AA==null) & & (cc == null))

  {

  get_File (f [ifil], myfile_arr, extension)

  }

  }

  on the other

  {

  if(extension!=".*")

  {

  If (f [ifil].name.substr (-extension.length) == extension)

  {

  myfile_arr.push (f [Ifil])

  }

  }

  on the other

  {

  If ((BB==null) & & (cc == null) & & (f [ifil] instanceof file == false))

  {

  myfile_arr.push (f [Ifil]);

  }

  }

  }

  } //for

  Return myfile_arr;

  }

  //---------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ------------------------------

  function stripExt (f)

  {

  Return f.substring(0,f.length-4);

  }

  //---------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ------------------------------

  function checkDocLen()

  {

  app.scriptPreferences.userInteractionLevel = UserInteractionLevels.neverInteract;

  while(App.Documents.Length!=0)

  {

  try {}

  app.activeDocument.close ();

  } catch (e) {}

  }

  }

  Thanks in advance

  Simon

  change

  var mySourceFolder = Folder("/Volumes/User/Desktop/IN");

  var myOutFolder = Folder("/Volumes/User/Desktop/OUT");

  TO

  var mySourceFolder = Folder ("~/Desktop/IN");

  var myOutFolder = Folder ("~/Desktop/OUT");

• Use regular expressions to extract .llb file from the path name

  I'm trying to be smart (always a dangerous thing) and use a regular expression to extract the name of a library to a filepath converted to a string.   While I appreciate there are other ways to do this, regex seems to be a very powerful way of neat, I would be able to operate.

  IE, if I have a string of type, C:\applications\versions\library.llb\toplevel.vi, I want to be able to extract the library.llb of the string, because it will be of variable length, may include the numbers & spaces and may be located in a file of variable depth hierarchy.   In other words, I want to extract the part of the string between the last-which ends with .llb

  The best I managed so far is \\+.*llb who all returned less the drive letter and the toplevel.vi

  Can someone help me to achieve this goal, or I'm better by using an alternative method (for example filepath string in array, search for .llb)

  Thank you

  Matt

  Hi Matt,

  attached you will find two other options.

  Mike

• If I use my photos for the screen saver, how can I get the file or the path to display at the top of each photo?

  I love to see the name of the folder on the picture, then I remember where the photo was taken.

  Hello GwynneSmith,
  This thread has been created in the Microsoft Site Feedback forum. the Microsoft moderation team has moved this thread to the files, folders, and search Forum.