Write the Bootdisk SATADOM latency problem

Similar Questions

• Latency problem causing the distortion of the sound

  I have explored a number of positions and found out that my relatively frequent distortion of the sound corresponds to a problem of latency that may occur every 15 seconds, give or take a second, higher than 29000us, but usually about 20000us.

  I disabled the common things in one by one, Device Manager without changing the latency.

  I did not have a TV tuner in the Manager devices, but uninstalled the driver of software without modification.

  dv7 4002tx No. WT507PA #ABG on Win7 64 bit

  Software added since the new one is Microsoft Office 2010 Small business Access 2010 and Windows 7 Professional

  HP Advisor said that it is up to date

  Finally, I got this problem resolved by HP. Their initial option was to ask me to re - install the image on the hard disk, which got rid of a lot of marketing software originally installed when sold, but it had no effect on the noise/latency problem

  Initially, I found the driver for ACPI-composite battery in Device Manager seems to cause the every 15 sec 20000us latency spike, because when I turned it off it, the problem disappeared. However, this driver was not what has been corrected to fix the problem.

  Care of HP phone rang finally comes with their solution, and it was as follows (and did not involve the composite battery ACPI driver). Despite the use of the HP support assistant, none of these changes has been marked.

  1. I was told to go to the HP website and download an update of the BIOS recently transferred to my laptop - everything seemed to say that it has fixed a graphics issue. This update of the bios makes it immediately fixed the problem, if there were still a few peaks of latency up to 8000us without audio effect and without that there is no regularity of appearance.

  2. I was also told to download the audio driver who had recently been transferred (since I first noticed my problem). This resulted in latency spikes never exceeding 2000us (and generally not exceeding do not 600us)

  I find it interesting that support assistant did not recommend these updates, and the audio driver is always marked as updated during the specific test, despite a seemingly better being available.

• The problem of the Cirrus network latency

  Recently, I did with a few simple tests using Cirrus and then try to apply it on my project.

  Before using the Cirrus, each customer along with each other through the message broadcast from a socket server. Now, the same group to speak directly.

  After testing and verfied the function, then I added logic to calculate the latency of the network like this:

  1. a customer is picked up as the host of the group.

  2. He calls group.post () to send the Ping message every 10 seconds.

  3. each client manages the messge to post in response group.sendToNearest () to the host.

  4. the host calculate latency using the time to send and receive time.

  In fact, these two clients are on the same computer, but the result is around 500 to 1000 milliseconds, which is very slow and confused me a lot.

  If someone please explain that? Or what could be the problem that I have done wrong and not noticed.

  Thank you

  Sam

  validation does not instantly propagate through a group.  the display system is set to a reasonable compromise between overhead, fairness and timeliness, for the scenario where each Member of a group can post something once in a while (which was the case for which it was designed).

  sendToNearest/sendToNeighbor/sendToAllNeighbors complete immediately.  Note that for sendToAllNeighbors, a "neighbour" is a counterpart that is directly connected to the group, and you may not be connected directly to all members of the Group (especially when the Group has more than 10-15 members).

• Backup put the ASR files on diskette, that it keeps giving an error message - other programs write to a disc, no problem

  I backup weekly on an external hard drive using tools-backup of system accessories.  I use the ASR feature for 2 years.  Today, he wouldn't write the ASR files on the diskette in the drive.  I checked the disk and other programs writing to her, but not the backup utility.  Without the ASR files, the backup is useless.  Does anyone know if this could be fixed by the re - install Windows XP Pro?

  Hello

  · What is you receive the exact error message?

  For now, you can check out the link below and check if it will help: http://technet.microsoft.com/en-us/library/cc737810 (WS.10) .aspx

• AEBS latency problem

  Hi all

  Recently I had a problem of serious latency with my 6th Gen Airport Extreme (model AC), which happens on the wired devices and connected wireless is not a wireless issue.  I tried a number of things to eliminate this problem... Rebooted the modem cable, restarted the AEBS, reset the AEBS to factory settings, downgraded the firmware as it seems to have started shortly after the 7.7.7 update, made sure that I wasn't sharing WIFI channels with the neighbors... None of these fixed the issue.  Just to make sure that it wasn't my access provider or the Internet in general having a bad week, I pulled out my old Netgear router, have everything connected to it and the latency problem disappeared.  I used it for a few days to make sure.  I have also connected my old Gen 4 AEBS and still no latency. I hooked the 6th Gen AEBS upward and returned latency, so I don't know what the source of the problem.  I tried to adjust some settings, but since this is the case for the cable connections and wireless, I guess it's more a hardware problem a matter of possible interference.  I have probably travelled all the troubleshooting steps, but thought I'd throw it out there when even to see if anyone else had any suggestions.

  As a side to this note, I'm having a specific problem specific wireless.  Quite regularly, the individual devices are slowed to a crawl.  That is, for the moment my iPhone is listed as having a connection 802.11a/n/ac to 433Mbps, but after a while (sometimes hours, sometimes days), it will be reduced to 1 MB/s 802.11b/g/n.  One.  Although I am less than 10 feet from the router by means of a direct line of sight.  This also happens to my iPad, MacBook, iMac, actually all devices using a wireless connection.  The only way to remedy this is to reboot the router, restart the individual device doesn't fix it.  I got to the point of having to manually restart the router one or two times a week to make sure that everything is connected.  Products like Apple WIFI had some kind of keep alive or scheduled reboot setting.  Again, any thoughts?

  Thank you.

  A few things come to mind:

  1. A number of Internet service providers began to role over IPv6.
  2. A possible incompatibility between the modem and your AirPort base station. Specifically, if you have an Arris / Motorola SB61XX-series modem.
  3. Your base station is defective.

  We can try to help with any part of these elements.

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• Write the key (path)

  I am developing a few screws that use Configuration (.ini) files in a Windows environment.  My problem is that writing a Windows file results of path in an entry in the C/Folder/File.dat form (form C:\Folder\File.dat).  Finally, there is an internal routine specific path to the common path which translates the paths of files Windows this version "oblique".  I start with a Configuration file which paths are in the 'Windows' format and want to create an output as file in "Windows" (not common) format.  [Turns out that the reading of a key (Path) has a common path to specific path VI "reformat" it, but if the format is already specific or Windows, the path, it will "pass through" unchanged, as it should].

  One solution, of course, is to recode the VI NOR myself, but this seems a bit excessive to me.  Someone at - it suggestions?  [Ooh, I don't think OpenG...]

  BS

  There is an entry in the key to write (String) VI which is ' chain brute writing? If you set this TRUE, it will write the string without the double-backslashes. Similarly, you have to wire a TRUE to the setting "read the raw string?" press the read (String) VI.

• Can after get values a RGB pixel, hoe I write the name of the color?

  Team,

  I'm quite new to LabVIEW and I'm working on an application using USB webcam to capture the color of the object.

  So far, it's finished, but now I need to write the name of the color on the screen.

  Please, could someone help identify if IMAQ or Labview have this feature?

  For help in understanding:

  Below you can see the example.

  R = 236

  G = 0

  B = 116

  And the name of the color is pink.

  But the problem is how to get the name by using certain features available.

  

  Thank you.

  Kind regards

  JCG

  There is not such a function, but you can create a pretty easily.

  I would divide each color component by 64 and to get a value of 2 bits for each color.  Combining these (multiply/shift and add) would give you a 6-bit integer, which gives you 64 color combinations.  Create an array of 64 strings with the names of the colors and the correct name indexes.  You need to browse manually the first time and assign a name to each color, but that wouldn't be too bad.

  Bruce

• not able to write the data through data acquisition

  Hello

  In fact, I need to send a code word (text file) from the program matlab through my data acquisition (OR-USB-6215). my program (transmitter.vi [case structure: page2]) attached below has a problem to do the task. whenever I run the program it gives me an error like

  Error-200479 occurred at DAQmx start Task.vi:2

  Possible reasons:

  Measurements: Specified Operation cannot be performed during execution of the task.

  Task name: _unnamedTask<84>

  At the moment I don't see output in my oscilloscope. But, if I highlight my performance I observe my samples on the oscilloscope with the following error message

  200288 error has occurred in the DAQmx write (analog 1-d 1Chan NSamp DBL) .vi:3
  Possible reasons:

  Measurements: Attempted to write a sample beyond the final sample generated. The build is stopped, so the sample specified by the combination of the position and the offset is never available.

  Hi Raja,

  What I did is I moved the 'write DAQmx' outside the while loop. That made the VI in this case is read the file and passing it to a table, and then this table is formatted a waveform to be written to the data acquisition device.

  With respect to the way in which the data is read, I don't change anything, it was based on your original code. A good way to know if you write the correct data is to check the chart view in VI.

  So the question is, is the graphic display showing the good waveform?

  Best regards

  Faris

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• Cannot write the file in the destination folder.

  Installed the new printer of brothers. PDF (file) scanning to e-mail could sweep old printer. Error code (CC3-103-00030302). Says "failed to write the file in 'Destination folder',

  Got, it works.  Here are some things I've done.  I'm sure that some of them are useless holes to leave open, but its not working.  These settings can be removed that time to identify exactly what is required to have fixed.

  Windows 7 64-bit Brother MFC-J615W network Scan to Setup

  1 open the windows firewall ports UDP 137, 54925 & 54926

  2. set the read/write for the guests and users permissions

  3. uninstall/reinstall

  4. in CC3 configuration of SCANNING has two tabs; a device and software.  You must pay attention to the directory/s you want to use.

  Now, I am very satisfied with this printer.  This is my first brother and I don't think that the last to the first impression.  I have now this printer works wirelessly with a Ubuntu Netbook Remix, a MacBook 10.5 OS and Windows 7 64-bit.

  * I am also able to scan in PDF without problem.

  See you soon

• I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer. How to replace this command?

  Silverlight.config.exe. appears again msg then causes a gel

  I can not write the new message of Windows Live Essentials due to the demand of Silverlight.configuration.exe freeze my computer.  How to replace this command?

  Hi JaphetMorales.

  (1) did you change on your computer before this problem?

  (2) what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  You can uninstall and reinstall Silverlight and then check.

  http://www.Microsoft.com/getSilverlight/get-started/install/uninstall-win.aspx

  See also:

  http://support.Microsoft.com/kb/977116

• The application youtube for the ps vita is the source of many problems and all sorts of problems for me

  The application youtube for the ps vita is the source of many problems and all sorts of problems for me... the main issue he won't let me write reviews... Please solve this problem as soon as possible... Please.  I can't take more of this nonsense that youtube app gives me... and it's even for the ps vita... It's very annoying that I can't make comments... it just says: when I try cannot do this action or something... It has * ing me off and many others also. :'(

  Hello David,.

  As much as we would like to help you, our colleagues in Playstation is best placed to help out you. Discover their community at http://community.us.playstation.com/ or visit their Web site to support https://support.us.playstation.com/app/contact_options for more information on contacting them.

• BSOD need assistance, I write the DMP file

  Hello, I have random BSOD during one day, like 4 times a day, I have seen fltmgr.sys as a problem, but I'm not sure. I write the dmp file, someone please help to undestand the problem please...

  dump file: http://www.4shared.com/file/xJejn93kba/060714-46597-01.html

  Info sys drivers: http://www.4shared.com/document/189XKlIWce/WER-581946-0sysdata.html

  Signature:
  Problem event name: BlueScreen
  Versão sistema operational: 6.1.7601.2.1.0.256.1
  Identificacao da Localidade: 1046

  Ilha de sober information o problema:
  BCCode: 50
  BCP1: FFFFFA800FAB4000
  BCP2: 0000000000000000
  BCP3: FFFFF88002692300
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  MSInfo: Nome operational system Microsoft Windows 7 Ultimate
  Versão 6.1.7601 Service Pack 1 build 7601
  Other information sober o Sistema operational issues available
  Faffa Sistema operational Microsoft Corporation
  Nome sistema LORENZOFP-PC
  Faffa sistema Dell Inc.
  Modelo sistema Precision M4500
  Tipo sistema PC x 64
  PROCESSADOR Intel (r) Core i7 CPU Q 740 1.73 GHz, 1734 Mhz, 4 Nucleo (s), 8 Processador (es) Lógico (s)
  Data/versão do A15 BIOS Dell Inc., 12/05/2013
  Versão SMBIOS 2.6
  Pasta do Windows C:\Windows
  Pasta sistema C:\Windows\system32
  Device inicializacao \Device\HarddiskVolume2
  Localidade Brasile
  Camada de Abstracao of material versão = "6.1.7601.17514."
  Name of user lorenzofp-PC\lorenzofp
  Fuso Monday Hora oficial do Brasil
  Memoria física (RAM) 8.00 GB installed
  Memoria total fisica 7.99 GB
  Memoria fisica 4.14 GB available
  Memoria virtual total 16.0 GB
  Memoria virtual available 11.8 GB
  Espaço land paginacao 7.99 GB
  Land of paginacao C:\pagefile.sys

  Thank you very much.

  Very interesting journal. It seems that the pilot who seemed to be a rootkit is a false positive with a strange string. Or a rootkit is present, but we cannot detect. avastMBR crashing may be related to something else in all cases, however.

  First of all, can you please uninstall Daemon Tools Lite + alcohol?

  In addition, subsequently, c:\windows\system32\drivers\sptd.sys is listed and loaded into your list of modules; SCSI pass through Direct Host - Daemon Tools (BSOD known issues with Win 7 and 8). Please remove it as soon as POSSIBLE with the uninstall tool - http://www.duplexsecure.com/en/downloads

  Kind regards

  Patrick

• Open XML, how to write the path

  Hello

  I'm new to the Blackberry development and I hope you can help me with my problem. I try to work with an XML file, and so far, all that does very well as long I had the xml file, I work on, in the folder of my java application and deyployed using the desktop software. Now, I tried to put the file somewhere else on the Blackberry and I don't know how wirte the path to the source code. I tried the following, but it seems to be bad:

  private static String _xmlFileName = "file:///store/home/user/documents/test.xml";
  DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
              DocumentBuilder builder = factory.newDocumentBuilder();
              InputStream inputStream = getClass().getResourceAsStream( _xmlFileName );
              Document document = builder.parse( inputStream );
  

  I hope you can give me a hint, how I write the correct path?

  Thank you very much!

  Best regards, jtr87

  PS: Sorry for my bad English, but I did not use it very often.

  You need to do something like that to get your InputStream:

  /** * @return an open InputStream for a file, or null if file does not * exist. * @throws IOException if there is an error opening the file */InputStream getInputStream(String name) throws IOException {
      FileConnection fc = null;
      try {
          fc = (FileConnection) Connector.open(name, Connector.READ);
          if (fc.exists()) {
              return fc.openInputStream();
          }
      } finally {
          if (fc != null) {
              try {
                  fc.close();
              } catch (Exception ignored) {
              }
          }
      }
      return null;
  }
  

  Notice that you must close the FileConnection at some point, regardless of if the call to openInputStream worked.