Writing on DVD + R, DVD - R and CDR on M300 - what's up?

Similar Questions

• Satellite M40-112: writing of DVDs takes long

  Hello, my friends, I have a Satellite M40-112 who bought 4 months ago. Now I have problems with my DVD-Ram, the writing of 4xDVD-RW, or 4xDVD-R of a volume of 4.3 G takes normally more than forty-five minutes, sometimes an hour. The transfer of data on DVD - RW or DVD-R the same volume also takes similar time. During this time, the CPU rate amounts to 100% occupancy when write or read DVD-RW/r. I tried the same jobs on my friends series Satellite L20, the average CPU occupancy rate was normally only 10 to 20%. Some experts could give me your ideas or suggestions treasurous? Thanks in advance.

  Hi my friend

  It's very strange. One of my friends has the same unit, we created a few DVD movies and burning procedure is much faster. I put t know what burning software you use, but please check if called simulation is selected. If so disable it.

  Good bye

• laptop is not reading/writing cd/dvd

  My laptop is not reading/writing CD/dvd

  Hello

  1 did you change on your computer?

  2 did you receive an error message?

  I suggest you to follow the steps from the links and check out.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

• How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan

  Hello! How to install windows 8.1 iMac (27 inch, mid 2011) without DVD drive and race El Capitan?

  I read everything I could on the subject and could not get the Boot Camp Assistant to create the USB key. Can you help me?

  Boot Camp Version 6.0.1

  If you run the wizard of BC, are you give the possibility to create an installer from USB? Did you change Bootcamp Info.plist file?

• Tecra 8100 - CPU max, DVD - ROM and BIOS update issues

  1. I have a 500 MHz processor on my 8100. I would like to upgrade to maximum capacity. I think it's 800 MHz since it is the highest, the series went to.
  But if it's 800 MHz, any Mobile PIII on this frequency do? Or should I check for special settings of the processor?

  2. I don't have a floppy, or ways to get drive one. And I'm not going to ebay one just for an update of the BIOS. Any ideas? A bootable CD with the files will do?

  3. What is the location of the DVD-ROM and what alternative models can I use? The 8200 went up to 8 x DVD - RW. Could I go further?

  Thank you. I hope that my post is OK like this instead of three different positions.

  1 take a look at the other Tecra 8100 models to determine which processors are compatible.

  2. I don't think that would work a bootable CD, you must follow a special procedure to update the BIOS and requires a floppy drive. If there is a version of Windows, you must use that instead.

  3 upgrade the DVD player can be difficult because you must use the correct master/slave settings, and it must have the same design of the façade of the original.

  Personally, I'm selling the laptop and buy a second hand faster one. It can work out to be cheaper.

• Satellite P100 - DVD burner and reader of SD card not recognized by Vista

  Hello everyone,

  I have improved my P100 of Xp to Vista and I can't make my DVD burner and my reder of SD (embeded to the laptop of course!) work.

  I can read CDs or DVDs, but I can't burn a DVD.
  My SD card reader in my device list but not appear in my browser!

  Even more, a 'mass storage' appears as not porperly installed but I have no reference on which device refer to the. Not to mention, I tried several times to install the utilities on the site Web of Toshiba sd but it didn't change anything...

  What laptop Satellite P100-xxx you have exactly?
  The number of extensions and model number would be very useful for further study

  Anyway. to get the card SD works in most cases you need to install the Flash Media driver
  In addition, it would be very interesting to know what SD card do you use.

  With regard to the Vista DVD burning issue;
  How have you tried to burn the DVD? Did you use special software to burn like Nero for example?
  Have you used different DVDs from different manufacturers of DVD?

  From my experience, it would be possible that the player manages all DVD. You try different DVD from different manufacturers. I had a good experience with TDKs

• Cannot write DVD/RW and CD/RW on my new Slimline DVD-RAM

  Hi, I have added one slimline DVD - RAM Toshiba PA3231E-1DV1 http://be.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/jsp/individualOptions.do?LNG=9&service=BE&ACTION=SHOW _ ATTRIBUTES & OPTION_ID = 44333 & tab = 1 #1
  in my Portoge M100. I can read and write DVD - RAM, CD - R no problem
  read only DVD, DVD - RW and CD - RW (if something already in this disc, otherwise no drive detected), but cannot write. Support tells me that this drive can read and write all discs, but cannot help me...

  Help?

  Hello

  According to the description of the drive can write DVD-R, DVD - RW and DVD-RAM. In my opinion, the first step, you can try is to test the player with various media (various manufacturers).

• dvdmaker has no dvd burner and loses the stord preps, does not move to the next

  was some kind of computer glitch, an infestation of microsoft, they phoned and sorted the problems, but since I can't use my dvd maker and have problems with very slow internet

  Hello

  ·         What is the operating system installed on your computer?

  ·         You get the error message? When you access DVD maker?

  ·         Did you contact Microsoft technical support or you have a call?

  I suggest that you disable one or more video filters in Windows DVD Maker and check if the problem persists, proceed in the link below:

  http://Windows.Microsoft.com/en-us/Windows7/video-filters-in-Windows-DVD-Maker-frequently-asked-questions

  Reference of the unsolicited phone call:

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  http://www.Microsoft.com/security/online-privacy/default.aspx#fraud

• System Recovery DVD 1 and 2

  My system; HP G series windows 7 64 bit. Hard drive crashed, bought a new, but needed the system recovery dvd.

  PC product #: QF761UAR #ABA

  The given info with dvd said to start the PC, the slip to disk 1, but will have to reboot the PC will start when the PC won't start, after which touch any key, no sliders.

  New hard drive does nothing about it, so when I started it upward, slip DVD, close it with force as he said, I have to and restart again, he has started in 'SAFE MODE' I have nothing, don't touch any keys because I remembered.

  Since 1 pm PT 22/10/2012 it has been sitting on 7% first of three boxes checked to date is the day after 23/10/2012

  It is still sitting at 7% and saying please wait.

  I am lost on what to do? I put it back should I have started in 'safe Mode' should I click Cancel?

  I just need this helping hand on what is my next step to do? Or can do?

  Thank you, in fact already obtained, type of this laptop.  I called 1-800 to support HP in the booklet of the DVD came with, just had to shut it down.

  As I started upward, Press esc several times.

  Then check the memory F2

  It checks and auto check then hard drive.

  Force shut it down again.

  Started again hit the esc and then going to F9 and then chose the internal drive.

  The program starts the whole process of the system DVD recovery disc 1 and disc, then 2 and then asked for all the others, I had DVD drivers and applications taken and it starts later.

  restarts on its own and the next hour, he did, it's clean.

  Summer use it now since 16:00 and oh YES I'm back!

  But thank you for getting back with me.

  LTR & blessings!

  Peace, Love &

• After the upgrade to windows 10 my DVD player and second HARD drive is not recognized

  Hello.

  I upgraded my laptop - Acer Aspire 7552 G - 10 Windows Home and now my DVD player and the second HARD disk is not recognized by the system. In Device Manager, the material is indicated under "Unknown devices" and I tried almost everrything and searched for a solution in-house. Hope that there is someone who has a solution to this.

  Key of the Windows logo + x
  Click on Device Manager

  If the yellow exclamation mark or unknow device is present
  Double click on it
  Choose the tab "Details".
  in the drop-down list, select HardwareIDs
  Click the first value and paste here

• I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

  Windows XP DVD with Windows Media Player problem

  I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

  Try to download the utility "Windows XP video decoder check utility.

  It checks the ability of DVD to WMP encoder

• DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive

  Original title: Dvd rom problem

  Am running windows XP. DVD - rom and DVD - rw read previously written DVDs and CDs but will not read a blank cd or dvd in the drive. Any help out there?

  Hello

  1. When did you start to question?

  2. did you of recent changes on the system?

  3. you receive messages or error codes?

  You can check the following link and try to run the Fixit and check.

  Your CD or DVD drive cannot read or write media

• How can I know if this 603G - UW15 from Acer came with a DVD burner and how to use it?

  I'm not familiar with Windows 8.1. Windows 7 and Vista on my other computers.  I want to make DVD and CD but does not know how to go on this issue.  I can't even say what programs are on this computer. I know apps are much used, but I still need programs, I don't?

  Windows 8.1 has a system of drag & drop.

  If you simply put a blank DVD into the DVD drive, and it will ask you what you want, then you can simply drag & drop a file in the DVD icon on your device and the driver (under "this computer")

• DVD ROM and DVD burner is no longer available

  I lost connection with my DVD ROM and burner.   They no longer appear with other devices under 'my computer' and when I look in Device Manager there is a yellow exclamation points next to these two devices.  What should I do to restore the connection or correct the error?   Any ideas why this happened in the first place? I am running windows XP service pack 2.  Thanks in advance.

  Hello

  Please try the instructions in the link below on this subject:

  http://support.Microsoft.com/kb/982116

• Problem copying to DVD-R and error... Please insert a disc or NO driver found

  Hello:

  I used 10 Roxio with Sony DVD-R for a copy of a sports game I have,

  In detail as follows:

  When one put an original DVD which contains sports-game, he's fine, but when I put a brand new Sony DVD - R for the copy of this DVD game, he said:... Not found disk or NO driver found, although there is a legitimate new Sony-DVD-R I bought this morning of typical products. I tried another DVD - R, about 5 more to do the job, but it's the same thing.  Does not copy.

  I am using"Roxio 10" and works well with another CD - R, DVD-R, even to copy music and Sport related programs.

  Ask me how to fix this?  Because I need to send it to my friend tomorrow.

  Any help on this would be greatly appreciated.

  Thank you

  Hello Cosmos10,

  I suggest you follow the link below and run the Fix - it who will automatically diagnose and repair problems related to the CD/DVD drive:

  http://support.Microsoft.com/kb/982116

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.