wrong volume

Similar Questions

• Windows - window wrong Volume

  Every time I click on a link in my email, a small window appears: Windows - wrong Volume.  So what follows is in the window: Exception processing Message 0 parameter x 0000012 0x7637023C 0x7637023C 0x860CC1E4 0x7637023C. What does that mean?  How can I get rid of him?

  It just started to arrive late last night.

  Thanks in advance

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• 10.11.4 boots wrong volume

  I had 10.11.3 works fine on the two MacPros, but patched on AppStore to 10.11.4 after they fail to start. On one I have an additional volume of Installer El Capitan that stops on rather than its normal startup volume. On the other I normal startup of a volume of merger and sometimes to synchronize this volume with clone of CCC to a volume in the mirror now boots instead of the 10.11.4 mirrored volume patched the boot volume.

  You wonder how to get the boot back up on my 10.11.4 patched volumes yet... I need to bless these volumes or what?

  TIA

  Have you tried resetting the default boot volume in startup disk preferences?

• System dual-boot programs wrong volume.

  My system: MacPro3, 1 - dual-booting with Snow Leopard and Yosemite.

  Having Photoshop installed on the two volumes, but work especially in the snow, Wacom has failed to make a control panel operation Intuos for my tablet that works in Yosemite.

  Not great, but a few days ago, snow leopard threw a wobbler on me and decided to launch PSCS3 installation of Yosemite, which means that it does not launch when I right click on a file and choose 'open with '. I'm told it's been moved and need to be repaired. Super frustrating.

  What is the preference I have mix - Finder preferences? -in order to get the leopard snow to see it's own programs installed, instead of it can use on Yosemite.

  Thank you

  Deb.

  The first thing I would try is to make a nice with and change the default application for a snow leopard. I would just try.

  Do you Yeosemite hd mounted when you're in snow leopard.  You might disassemble the drive, you don't need.

  Let me know, I got a script for this at some point.

  R

• Why my pc keep said there is no disc drive.the wrong volume is in the drive.i have no speaker icon

  my pc is in yhe drive.how bad I get it in E?

  Hi audreywallace,

  ·         Are you referring to the CD/DVD drive?

  ·         You receive an error? If so, when exactly do you see the message?

  ·         You have sounds on the computer? Is it only the sound icon missing?

  Check to see if the following is useful.

  Method 1: If there is no sound and then run this utility of automated troubleshooting and see if it helps.

  Diagnose and automatically repair audio playback problems

  Method 2: If it is solid but just the missing icon then, refer to this article.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add

  Don't answer not with more information about the disk problem you are facing, then we can help you best.

• SanDisk Ultra 32 gb, looks like a removable disk but not volume

  Hello

  I am new to this forum and have traveled all over and the rest of the internet to find a solution but could not find something that works.

  I have a few readers Sandisk Ultra 32 GB Ultra (not back to the top of those).  They worked fine for the last year or two, but recently I can't display the data on my Vista 64 bit PC.

  They show as a removable drive and when I click on them, they show as empty.  I look at the properties and both used space and free space is 0.

  In Device Manager, they show under hard drives.  I tried to change the drive (as well as the removal of the letter) letters and nothing seems to show the volume.   It seemed to me remember what they used to appear under my front USB controllers, so I wonder if things now of Vista, it's a different type of player.

  There are video files on the disks and I have confirmed that they work because I can still play the USB drives via my USB drives BluRay port.

  I uninstalled the drive then plugged found Vista and then he said that he successfully installed the driver and back in.  There are no conflicts in Device Manager when it is plugged.

  I have used other USB drives (thought the USB port was dead) and 3 other discs (2 other Sandisk and 1 Kingston) times Plug and work perfectly.  It's only the Sandisk Ultra that I have the problem with.  Other Sandisk 2 those who are not of the Ultra.

  I tried to copy files to the disc just to check if it was reading wrong volume, but it actually gets a message that the location of my source files is missing, which is strange because I can move the files to other drives or places, but she only errors when I try and place it on the Ultra with volume 0.

  I'm totally stumped.  I hope someone can help.

  I should just wait a few more minutes to do a little more research.

  My apologies.

  The questions got Samsung Kies.  I stopped the process running in the background and it worked perfectly.

  Everything was good.

  Feel bad display.

• Failed to start after the active partition changed by mistake

  By mistake partition active of my hp laptop pavilion has been changed to recovery disc (D) and WINDOWS DOES NOT START. I can access prompt f11 (hp system recovery) when starting. How to change the partition active (command prompt in recovery when you start using f11 Manager) command there? Help, please

  Hello DipayanSaha ;

  Let me welcome you on the HP forums!

  I read your message on the orders you want to change the volume Actiive and wanted to help.
  
  The basic command is diskpart - and you run from an elevated command prompt window.  You should know that, since it is a steering control system, it will do exactly what you tell him to do it-no questions asked.  So, if you say to format the wrong volume, there is no going back from that.

  Once you enter diskpart in the command window, wait until you see DISKPART > appear on the command line.  This indicates that you are now inside the diskpart command environment.

  Type help to see a list of commands and options.

  Enter the volume in the list to get a list of partitions.  Note that they are numbered from ZERO, not one.  Take note of the two volumes that you want to change the attributes. Make sure you write down the correct volume numbers.

  For the sake of discussion, let's assume the volume numbers are 1 and 2, 1 being the volume of the BONE and 2 being the recovery volume - volume numbers may be different.

  To remove the active indicator of the volume of recovery, follow these steps:

  Select volume 2

  inactive

  To now add the active indicator for the OS volume, follow these steps:

  Select volume 1

  assets

  Active flags have now been reset correctly, and you're done, so type exit

  The command window will display Exit DiskPart...

  That's it - good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How can I fix Error 1324?

  I had a problem with update of Adobe Reader, and kept getting an Error 1324, path to the "file...". ' is invalid or wrong volume.  It would allow me to update or remove the drive to try to reinstall it.  I was finally able to remove the drive, using the uninstall software, but now I can't reinstall the drive due to the 1324 error.

  Hi marlowmarlow,
   
  -Which version of Adobe Reader you are trying to install?
   
  Try the methods listed in the following article and check, if it helps in fixing the issue:
  Installation interrupted. Acrobat 9 Reader 9
  Troubleshooting update errors. Acrobat, Reader | 8.2.2, 9.3.2 and later | Windows

• Error message in Windows.

  I get a Windows error message as follows: Volume Windows bad.  The wrong volume is in the drive.  Volume NN_AMERICAS_EURO please insert the D drive.  I have nothing in the drive, or I lately.  What is c?  It won't go away either.  He sayd cancel, try again and continue.  I click on cancel, and the box does not disappear.

  weeber78,
  Are you able to completely connect and use other programs?  If so, you must perform a clean boot and troubleshoot startup items.

  Follow the steps in this article to resolve problems with a clean boot.

  Advanced problem resolution by clean restart.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista recovery failed, then I install Windows 8 on the not Bootable Windows Vista.

  I bought a PC from a friend, Windows Vista Home Premium.
  Has tried to run a system recovery, but stopped by error 0xd0000017.
  I then created USB boot killdisk to wipe and clean my hard drive, but I think I accidentally delete the wrong volume.
  Not to restart the PC indicating that the file is missing please insert the disc of Windows Setup.
  I downloaded and burned Windows Vista Recovery ISO but could not run the "repair", not re - install.
  I guess the only solution is to buy an upgrade of Windows 8 and clean install it.
  But what bothers me is:
  I don't know if I have a prepared partition when Windows 8 invite "where you want to install windows 8. Help, please. Thank you very much.

  "It's true that the product key is no longer valid with this particular brand? or I can activate the product key for 2 years with any Installation of Windows Vista DVD? »

  Reread my original answer.

  I gave you the information about what you are now on.

• How to close a window of movie maker.exe

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: can someone help me to close a 'bad volume' opinion? "The wrong volume is in the drive. "does not even help remove the DVD.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  How to close a window of movie maker.exe

  ====================================
  The following steps may work for you:

  Launch the Task Manager / Ctrl + Shift + Esc / process tab

  Complete the process on all instances of moviemk.exe

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Replacement has no HARD drive

  I have a T61 with the Seagate 160 G 7200 RPM HARD drive.  The HARD drive has failed which led to the infamous BSD.  I was unable to use the recovery & rescue integrated as it fails, likely due to HARD drive problems.  So I purchased and installed a WD 320 G 7200 RPM Scorpio Blue SATA HDD.  I also called Lenovo and bought a set of rescue & Recovery CD.  When I launched the R & R set, it reports an error on Disc1 and continues to run in the recovery process, but dies with the error "there are no file list of modules.  In desperation, I reinstalled the original disc of 160 G and re-run R & R.  He was running very well and turned on my T61.  But I trust is more than HARD drive since he already had bad sectors.  So, I put the new 320 G disk HARD back in and I tried R & R once again.  I had the same error 'there no module do list file.  So, the mistake of R & R is related to the new HARD drive.  Hmm, I thought that I could clone the old 160G for the new 320 G HARD drive.  So I put the old 160G HARD drive in a USB enclosure and the new 320G disk HARD in the Bay T61 and run Acronis to clone from the old to the new.  As you can imagine the clone fails due to errors of area on the old HARD disk.  So, I'm stumped on how to get the T61 running with the new HARD drive.  Any ideas why R & R fails with the error "there is no file list of modules?

  Well, I think I've solved my problem.  "When I was using the R & R disc set, an error will be generated on the recovery of the product 1 disk saying: ' the wrong volume is mounted" and telling me to reinsert the disk recovery & rescue original.  So, I then inserted the R & R disc and click 'Retry '.  The recovery process would then immediately ask product Recovery Disk 2 and start the process.  7 discs later, I would get the error "there is no list of modules file" and the process could fail.

  This time, on the first 'bad volume' error, I left Product Recovery 1 in the drive and clicked on continue.  Now, the process has continued and the rest of the product disc 1 (which it didn't when I followed the instructions in the error message).  After that, everything flowed on properly and moved to the Windows installation that is running now - fingers crossed.

  So, there's something funky in this error "wrong volume".  As to why it occurs with a nice new HARD drive and does not work with old HDD failure and why the error is not treated correctly by the resumption of the process, I have no idea.

  BTW, the docs that come with the unit R & R are quite sad.  They do not match the process at all.  For $50, Lenovo could have done better.

• conversion issues catalogue from PSE6 to PSE8

  OK, I read this forum, downloaded psedbtool (including the excellent documentation of John Ellis) and SQLite Database Browser to correct an error "Drive_path_if_bultin." Yet, I can't convert my catalog from version 6 to version 8. I more than 58 k photos and videos and wouldn't like to be stuck in PSE6.

  Here is the output of psedbtool:

  c:\psedbtool > psedbtool - printVolumeTable

  psedbtool version 1.07

  Opening of catalogue P:\PHOTO\catalog.psedb

  Version of Photoshop Elements: 6

  Total files: 58448

  Checking for missing files: 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

  Missing files total: 0

  Total of offline files: 0

  Total files wrong volume: 58448

  ....

  Path used by PSE: P:

  Type: builtin_drive

  Status: online

  Total files: 58448

  Missing files total: 0

  Total files wrong volume: 58448

  Description: PHOTOS

  Series: 7419-E677

  Drive_path_if_builtin: P:

  ID: 761682

  WARNING *: the wrong volume files

  --------------------------

  Readers of Windows

  Type path Serial Reader

  C: builtin_drive *-*.

  F: builtin_drive *-*.

  I: readonly_drive *-*.

  P: builtin_drive 7419-E677

  V: builtin_drive *-*.

  I used the instructions of John to change the serial number to get rid of the warning message "bad serial number in the catalog.

  I also used his instructions on a workstation (in this forum) to change (via SQLite Database Browser) the Drive_path_if_builtin to do the same thing as the 'path used by PSE.

  Yet, when I try to convert the catalog in PSE8, I get the error:

  The conversion operation failed. Try to repair the catalog with the software that created it and restart the conversion.

  I tried workaround John suggested for "Files of the wrong volume" error, but it seems to assume that the new catalog (for PSE8) already exists.

  Here, any help would be GREATLY appreciated.

  ZEP

  There are two problems with your catalog that are probably confused the conversion.

  1. your photos are stored in the catalog folder P:\Photo.

  2. you try to place the PSE 8 catalog converted into a subfolder of the PSE 6 catalog file:

  P:/PHOTO to P:/PHOTO / PHOTO copy P:/PHOTO

  To work around this problem, first move the files to the catalog of p: back to a folder on your C: drive, such as described in step 4 of the FAQ:

  http://www.johnrellis.com/psedbtool/photoshopelements-6-7-FAQ.htm#_Problems_converting_cat alogs

  Then, when you call the file > catalog > convert in PSE 8, before clicking on convert, select catalogs accessible by all users, and then click on convert.  This will place the catalog converted on your C drive, not in the P: subfolder.

• When I try to download and open the creative cloud it says error code 22. Volume not supported. What I am doing wrong?

  

  Error "No supported drives case-sensitive" or similar facility. Mac OS

  Mylenium

• Music volume decreases other opening applications

  I noticed with iOS 10 and I don't remember ever noticed this before, but when I'm listening to music with the app Apple music, lazy or any other service of popular music, and I start SOME applications, such as a game, the music volume falls to about 50%, until I left this app. I guess it's default, but I could be wrong.

  This happens on my iPhone Plus 7 as well as my iPhone 6s longer.

  SO, 2 things.

  1 is supposed to decrease its volume output when launching other applications at the same time the music?

  2. If so, is there a way to disable this option so that the volume of the music is intact?

  I hope that makes sense! Thank you!

  No one at all?