WRT160N is unable to access the internet but who still have network connectivity

I have a PC attached by a cable and a PC and a laptop connected wirelessly to my router. Someone knocked taking sheets, so I reconnected it and now I can't access the internet even if I still have access to the network and I can get readers shared on all machines. I can ipconfig all machines and get Ip etc. I ping too the other machines on the network, but Firefox and IE will not go to the internet

I plugged the cable directly from the modem to 2 machines and get internet access. I rebooted router, modem, and workstations many times. I even put in the disk of router and crossed all configurations, once more and it went well but still the same result.

I have no wireless phones, but they have a wireless printer that I bought a few weeks but dounbt that this would hinder.

The router is only a few months old, ideas?

Your router could have lost configuration settings and may need to be reconfigured.

Since you're online with the modem then you reconfigure router following this.

For connection cable and broadband connection.

Tags: Linksys Routers

Similar Questions

  • We have a Nextbook but are unable to access the Internet at home

    We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.

    Hi Vernon,

    1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?

    It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:

    http://www.nextbookusa.com/techsupport.php

    Hope this information is useful.

  • I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted?

    I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert.  How can it be deleted?  I have McAfee Total Protection Plus, but which apparently does not work.  Help, please.
    This problem existed for about a week.

    Hello

    ·         What is the exact error that you are experiencing?

    ·         How long have you been faced with this problem?

    ·         Remember to make changes to the system?

    It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.

    http://OneCare.live.com/site/en-us/default.htm

    Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.

    Microsoft Security Essentials

    http://www.Microsoft.com/security_essentials/

    I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.

    Malicious software removal tool

    http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  • Firefox is unable to access the internet

    Hello

    Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

    Best regards
    Joel Hedestig

    You can try using the beta version of firefox mobile?

    https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

  • I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

    I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

    original title: can't send or receive emails.

    Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

    Or you might want to try the new port settings.
    http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm

  • Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

    Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?

    Log, activation, or connection errors. CS5.5 and later, Acrobat DC

    https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

    Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?

    It sets obtained :-) Sorry for the delay

    Thank you very much! has worked perfectly!

  • The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP. I have it enabled on DEP. Please help me.

    The game I play is Combat arms, I gave it through the firewall but I still have to allow him, and in the end, the combat arms stops responding and closes due to the DEP (Data Execution Prevention). I leave on the DEP list. Please help me.

    Hi Brainiac107,

    1 when was the last time it was working fine?

    2. did you of recent changes on the computer?

    Method 1

    Check and make sure that you have followed the method to allow the game through the protection of execution of data (DEP) below.

    "" "" "a) departure ' Run ' sysdm.cpl ' click 'Advance' tab" now click on 'Settings' running ' then click on the "Data Execution Prevention" tab

    (b) now click on the "turn on DEP for all programs and Services except those I select:

    (c) then click add and go to and select C:\Nexon\Combat Arms\engine.exe

    (d) now, click Ok then apply.

    (e) restart the computer.

    Change Data Execution Prevention settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/change-data-execution-prevention-settings

    Change Data Execution Prevention settings

    http://Windows.Microsoft.com/en-us/Windows7/change-data-execution-prevention-settings

    Method 2

    If the previous step fails, then try to run the game with administrator privileges and check if it works.

    (a) right to the shortcut from the game or if you try to install the game, right click on the game setup.

    (b) click on run as administrator.

    Method 3

    If you're still having problems with the game then post your request in the forums of game seller.

    http://Forum.NEXON.NET/CombatArms/forums/8624/ShowForum.aspx?PageIndex=2&SB=0&d=1&DF=11

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom.

    I need to reinstall xp on my nx6125

    I want to do a clean install of windows xp on a hp compaq nx6125 but do not all disks with the laptop but I still have the original windows sticker on the bottom. is this possible or do I have to buy another drive xp and sticker

    Hello

    Yes, you can use this COST to install Windows XP. However, you must have Windows XP.
     
    If you face any problem regarding the installation of Windows XP.
    You can contact our Windows activation service.
    Here is the link:
  • Pavilion G7: Desktop Applications cannot access the Internet but metro apps can

    I have a Windows 8.1. About 5 days ago from desktop applications (IE, Chrome, Google Drive Office) has ceased to be able to access the Internet at all.

    However, apps of metro (metro IE, Facebook, Mail, etc.) can still access the Internet.

    How could it happen? That the two environments use different settings? Is there a setting or registry entry that applies only to the desktop environment?

    Analyses of viruses and malicious software (Malwarebytes and Windows Defender respectively) were not able to do what anyone. But since they are two desktop applications they have not been able to update their files of signatures since this problem started.

    I found the answer on the Microsoft site on this topic.

    The answer is to reset Winsock using this command from an administrator command prompt: "netsh winsock reset" and then restart.

    I did and that fixes the problem immediately.

  • I can access the internet in safe mode with networking; then for a short period in normal startup; but then I lose online access.

    Windows XP: internet connection

    Windows XP: I access to internet in safe mode with networking; then for a short period in normal startup; but then I lose access (IE8, Google, AOL) online. I tried several times, sometimes it seems able to stay online as long as I'm using the installation, but if I take a break, I lose access and return in safe mode.

    This question is submitted in safe mode with networking

    Hello

    Normal mode try to know what actually is the problem with the Internet connection and the components involved.

    Maybe this can help.

    For the wire connection - http://www.ezlan.net/debug.html

    For a wireless connection - http://www.ezlan.net/wireless.html

  • Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

    I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

    I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

    Any help would be greatly appreciated.

    Maybe this can help.

    ----------------------

    Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

    Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

    Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

    Public share
    = network Public (as Internet Café) in order to reduce security risks.

    For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

    http://www.ezlan.NET/Win7/net_name.jpg

    Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

    General example, http://www.ezlan.net/faq.html#trusted
    Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    ------------------------------

    If your network consists only of Win 7 and you want a simple network, use it.

    http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

    After you have configured the homegroup, scroll to the bottom for the Permission/security section.

    -----------------------------

    Win 7 networking with other version of Windows as a work network.

    In the center of the network, by clicking on the type of network opens the window to the right.

    Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

    http://www.ezlan.NET/Win7/net_type.jpg

    Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

    Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

    Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

    Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
    Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

    Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
    Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

    When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

    -------------

    If you have authorization and security problems, check the following settings.

    Point to a folder that wants to share do right click and choose Properties.

    In the properties

    Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

    This screen shot is to Win 7, Vista menus are similar.

    http://www.ezlan.NET/Win7/permission-security.jpg

    The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

    When everything is OK, restart the network (router and computer).

    * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

    * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

    ---------------------

    *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Unable to access the internet even if my screen I'm fully connected.

    I recently changed my Windows 8 and I find I can check when I try to go on the internet through the network that I am connected with a signal, a message pop up to tell me that I can't access the site can someone tell me why? The diagnosis say that I am connected and that they do not find a problem.

    I have the same question, the funny, is I can't access the internet on my admin account, but it works very well on my account of children.

  • Since the update last night (05/02/2013) we are unable to access the internet.

    My son says that there is an update last night when he was on the computer and the browser only, that we can use to access the internet now is Windows Internet Explorer. I tried all of the recommended patches and it still does not work.

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox and all the leftover program files and then reinstall Firefox. Please follow these steps one by one:

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click Exit in the file menu or Firefox) and confirm all future messages.
    3. Now, uninstall Firefox by following the steps mentioned in the article to Uninstall Firefox .

    IMPORTANT: Under Windows, the uninstall program has the option to remove your personal data and settings. Make sure that you have not check this option. If not all of your bookmarks, passwords, extensions, customizations and other Firefox data user profile will be removed from your computer.

    After uninstalling Firefox on Windows, delete the folder of the program "Mozilla Firefox", located by default in one of the following locations:

    • (Windows 32-bit) C:\Program Files\Mozilla Firefox
    • (On 64-bit Windows) C:\Program Files (x 86) \Mozilla Firefox
    1. Go to the Windows Start menu and click on 'computer '.
    2. In the Explorer window that opens, double-click on disk Local (c) to open the C:\ drive.
    3. Find the folder "Program Files (x 86)" or "Program Files".
      • On 32-bit Windows, double-click the Program Files folder to open it.
      • On 64-bit Windows, you'll see a folder "Program Files (x 86)" AND a "Program Files" folder. Open the Program Files (x 86) folder.
    4. You are looking for a folder of Mozilla Firefox . If you find one, right click and select delete and confirm that you want to move the folder to the trash.

    Now, go ahead and reinstall Firefox:

    1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
    2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

  • Network computer XP can't access the internet, but can see the other computers on the network and can transfer data

    A COMPUTER on MY NETWORK CAN'T ACCESS INTERNET - GET 'PROBLEMS WITH WINSOCK CATALOG PROIVDER' when I do a dionostic - NO IDEA HOW FIX?  RUNNING XP Pro

    Hi PhillipClervi,

    1. did you of recent changes on the computer?

    2. how many computers are connected to the same network?

    3. what happens when you try to access the internet on this computer?

    This would happen if there is a corruption of Winsock on the computer. I suggest that you reset the default Winsock settings and check if it helps.

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    http://support.Microsoft.com/kb/811259

Maybe you are looking for