WRT160N v2: the latest firmware update went wrong!

Similar Questions

• Find the latest Firmware updates for your HP printer

  Firmware is a device, or a printer operating system. Printers need a form any software that runs on the inside so that it can carry out the tasks with and without intervention from a computer or another device. Sometimes a printer needs to update the firmware to fix problems with the copy, scanning, printing and communication.

  There is a very useful video provided by HP to help to update to the latest firmware for your HP printer.

  When your printer needs an update, HP offers a Firmware update that gives you the latest features for your printer. This video shows how to search for updates that are available from HP for your printer.

  I hope the video is useful for anyone wondering about the firmware and how to upgrade.

  If anyone has any questions or problems with the update of the firmware do not hesitate to ask.

• first firmware update went wrong...

  Hi all

  I have a wrt54g (8.1) who has acted a bit funny so done some searching on Google and followed the instructions to install a new firmware.  First of all, the installation failed, double checked to make sure I downloaded the correct file (FW_WRT54G_8.1.09.02_US_20071227.bin), made a reset and power cycle.  Checked the data again and everything on the configuration of the router has completely disappeared.  Each entry has NA next to him...

  > help!

  You can't put the same settings as you have before at least that you could not save the configuration. However, you can reconfigure the settings and still get online again. The following link can help.

  Different ways to set up your Linksys wireless router

• Sansa C250 v2 (01.01.05P). microSDHC? update to the latest firmware? Linux questions.

  People of greetings,

  just got my refurbished Sansa C250 2 GB. Back to v2. Parameters a 01.01.05P for the version number.

  I read somewhere on these forums that even if v2's back, it does not mean necessarily that the player is actually v2. Is this true? How can I tell what version it is?

  So should I upgrade to the latest firmware and which?

  I plan to buy either a 4 or 8 GB card microSDHC. Advice please.

  Anyone who has used linux to update firmware and for all other operations or would I have to use windows?

  Thank you

  Prasad

  Well, since nobody answered my questions, I will answer them myself.

  As has been said on this forum and others (http://www.anythingbutipod.com/forum/showthread.php?t=24680), this is the version of the firmware that you use to know the version of your player. Mine is v1. I think another, or should I say a sure way would try to penetrate into the first partition (or the partition to install the firmware) - If your drive is v1, it would be to put your player mode waiting (moved to the rec and orange shows on the left button) press and hold the rec button and plug it into a computer should appear the partition of 16 MB. V2 has a different key sequence.

  Since it is highly recommended to upgrade to the latest firmware, I upgraded to 01.01.00P which, by version number appears a downgrade, but it is what is here to... He did bring back the USB menu however.

  Since then, I could install Rockbox (http://forums.sandisk.com/sansa/board/message?board.id=c200&thread.id=3396), I'll go ahead and buy a 8 GB microSDHC card. Will post here when I get it to let you know if it worked or not. I think that should be. This post helped me decide to go ahead and buy it: http://www.anythingbutipod.com/forum/showthread.php?t=35302.

  I used two Fedora-7 and live CD Fedora-9 (on USB) - no problem.

  just something I did - I took a return of my entire 2 GB (after formatting the partition of 2 GB to get rid pictures and music that came on the player). used dd if = / dev/sdc. gzip - c > sansaC250. Also saved the first (16 MB) partition dd if = / dev/sdc1. gzip - c > sansaC250part1. I just thought I might be able to use it if I bricked my drive when rockboxing it. I don't know if restore partitions (or the entire disk) is unbrick it at all. Happy had to use it.

  Take advantage of...

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• R7000, problems with wireless connection after the last firmware update 1.0.6

  I recently updated to the latest firmware available for the R7000...

  The upgrade went well and my Wired PC all connected without any problem, but several of my wireless devices were unable to connect to the WiFi. I have my cell phone Wifi (Android phone) kept gives me an error of authentication, but was able to connect to the network comments... weird...

  I started firmware 1.0.4 and everything worked well again... it seems that the new firmware is buggy.

  The Firmware versions listed above are only for the first three issues, to save typing, but you get the version that I use...

  Nick

  Hello

  I would like to let you know, I've improved in 1.0.6 last night and everything worked. The difference is this time I had to reset my router to the factory settings using the reset hidden at the back button and hold the button for about 7-10 seconds. This resets the router to the factory settings. I then had to re-enter all my IP address reservations and the word block list, but all my wireless devices were able to connect. The last time I did the upgrade, I just restarted the router, and I had read that I had to do a factory reset to operate correctly.

  It would have been nice for Netgear arrive at a way to extract Information form my version last-place back... it would have saved me a lot of time...

  Good luck

• My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... .etc

  My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new

  There may be a setting on your router you can disable IPv6.  Try this and also disable IPv6 on your NIC again.

• Where to download the latest firmware for Toshiba TL938G

  Can someone give me a link where to download the latest firmware for TL938G?
  I want to update with USB

  Thank you

  Hello

  Have a look here:
  http://www.Toshiba-OM.NET/firmware.php

  + The message was edited: link has been removed.

• Cannot find the latest firmware for the Toshiba 40TL838G

  Hello

  I am trying to download the latest firmware for the 40TL838G model, but I'm not.

  Where can I find it?

  Thank you.

  The same has been asked in this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=73914

  We can receive the update only via a network update
  In which case you will not receive updates via the network, your firmware is up to date.

• Download the latest firmware for Toshiba 40RL838G

  Can someone give me a link where to download the latest firmware for 40RL838G?
  I want to update with the USB (no internet connection available)

  Latest firmware (in the firmware information) is 6.4.0V.1, but TV has 6.1.oK.1 (21.Oct 2011)
  With this firmware, I have problems with the channellist.

  Thank you

  I guess that you won't find it for download.

  The info says:
  Updates to energy efficiency TL838/868 RL838/858
  Energy efficiency upgrades were made to the series RL838/858 both TL 838/868. In order to update your TV with the latest firmware and take advantage of these changes, please follow the methods below:

  * Please note that the TV must have an active internet connection to update the firmware.

  Internet access can be obtained by connecting to the local network or WiFi (using the required WiFi dongle)

  Connection can be confirmed by doing a trial of network connection. This can be done by selecting preferences-> network-> Network Connection Test configuration

  * Method 1: *.
  _Automatic network warning
  When the TV goes to sleep the network SW update is checked on the power on the TV, the following message will appear (after 1-2 minutes):
  A software update is available. You want to upgrade? Yes/No, to update your TV select Yes.

  * Method 2: *.
  _Manual network warning
  In order to make searching for a firmware update anytime TV in time to follow the instructions below:
  Select Setup-> Software Upgrade menu-> Select network update
  The TV will then focus on the network for the new firmware and if possible a update command prompt will appear

  If you need the device to the network

• Incomplete backups after the recent firmware update (ReadyNas NV +) 4.1.15

  Hi, I had the system work perfectly without any problems until he informed me of the 4.1.15 updated. I went ahead with the update and now the backups are incomplete. It stops around folders starting with Mr. to make things worse, backups are reported as successful. I checked the old backups and they do not have a problem. Is it possible for me to go back to the old firmware update? I'm not sure than I had before but and I don't know how to find out who. Model: ReadyNAS NV + [X-RAID] Serial: 23J5127N0033D Firmware: RAIDiator 4.1.15 [1.00a043]

  Should he behave differently if you select Remote: Windows/NAS (Timestamp) ?

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Installed the latest important updates this morning; upon restart, the computer didn't work as expected. now behaves as if the motherboard is dead.

  This morning at appx. 1:30 AM PST, I installed the latest important updates from the Windows Update Manager on my HP Pavilion dv6000 laptop. I did manually, by a double click on the little icon in the toolbar and clicking on the button install. Once the update had completed, I clicked on the "restart later" button and close my computer using the Shut Down command - the usual symbol "click here to close and complete the installation" didn't appear. I thought it was a little weird, but chalked it up to the fact that I had taken the lead and made the installation.

  About an hour and a half later, after being able to get to sleep, I decided that I would try to do a job. I pressed the power button and my computer started well upward, giving me the ' now install, update (1/3) [percentage] completed. Do not turn off your computer. "message. Which is quite normal, let him do his thing without turning it off.

  The update is completed and I am greeted by my office. Displays the logon to Gmail Notifier window, and that's when my problems began: I tried to move the arrow to disappear, and the arrow has not moved. The circle of "transformation" had, next to the arrow, so I thought it must be a minor hiccup. I've waited, waited and waited... But even after all of my normal startup programs loaded, my mouse has failed.

  Pressing the Windows key to open the menu start does not work, either; It was as if everything had been disconnected. After waiting a few minutes, I decide that maybe I just need to restart and, given that my keyboard was not working, I pressed and held the power button until the system off (I know, I know, it's a horrible thing to do).

  I waited a minute, and then you press the power button. The lights came on, the fan spun, but the screen remains black as if I did nothing. I waited, because my computer arrived in the past tried to give me an attack of apoplexy by hanging several screens, but... nothing. The fan spun, the light shone their beautiful blue, but that's all.

  The only thing I have changed or done differently was the updates, I have not dropped my computer; I've not spilled something on or in I have a Targus chill mat that I use religiously. I download attachments from people I don't know no/trust (I can't, my antivirus program deletes attachments in emails from spam); I use Firefox with NoScript and anti-ad; My AV/Antispyware/malware program is always up to date and six types of awesome and more.

  My system is Windows Vista Home Premium on an HP Pavilion dv6000. I have an AMD Turion 64 x 2 processor and a Nvidia mobile graphics card (I don't remember exactly who he is; I can't the specs). I don't have a DVD of restoration, for reasons that did not need explores right now. I had my phone on... Two years, I think. I'll have to double check.

  I can't start in safe mode, because I get nothing - no POST, no beeps, without bumps. The CD/DVD drive makes some noises, as he is looking for a drive (there isn't one in the drive), and that's it.

  I think I have to take someone and make them open and see what's the problem, but I appreciate any thoughts/ideas/opinions/assistance that anyone can give. Thank you for your time and attention.

  Alas, no, the screen seems to be fine. He had not been acting funny before that, in any case. I checked out, and the external monitor just went to sleep because there is no signal.

  Thanks for taking a peek anyway. I guess it's a workshop for me and my laptop.

  Birdy

• The latest firmware will harm my drive?

  Many have had many kinds of problems after updating to the latest firmware. Will it hurt my reader too?

  SR - rox wrote:

  Many have had many kinds of problems after updating to the latest firmware. Will it hurt my reader too?

  Sansa has a program of software quality engineering, new versions of firmware are tested before their release.  Everything has been done to ensure that it does not cause harm to your reader ^_^ and if there is any harm because of the firmware, Sansa held behind her.

  However, don't forget to reload your rocket before update and be sure to follow the instructions.