WRT320N and internal VPN server

Similar Questions

• Cisco asa 5505 and centos VPN server connection

  Hi all

  Please I want to set up a VPN between Cisco asa 5505 and centos server.

  Here's my senerio

  -------------------------

  ASA 5505

  Public IP 155.155.155.2

  Local NETWORK: 192.168.6.X

  CentOS Server

  ------------------

  Public ip address: 155.155.155.6

  Thank you guys

  Apology, do you mean access remote VPN Client of hundred BONE for Cisco ASA 5505?

  If the remote access, here are the sample configuration:

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008060f25c.shtml

• VPN and the visa Server

  Hello everyone,

  Do not angry with me if I showed him suddenly to the top and raises questions.

  I have 1 question to ask:

  Any body ever user Visa Server on a computer on which VPN client to connect to a shared network secure?

  I Im trying to do is set up a laptop computer (with the Client VPN + labview 8.6) remotely has direct control of equiptments this conect on another computer on the corporate network.  I can't make it work.  Any suggesttion is Normal 0 false false false MicrosoftInternetExplorer4 / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  appreciated.

  Thank you

  Tuan Phan

  Hello

  Your VPN works, but you must remember that you must have the VISA runtime installed on the computer that you use for vpn to and have NO servers running on the computer you want to control. We must also ensure that the default IP address is that of your local computer, because once it is changed, it will adapt to an IP address of the system. Then go to network connections > advanced > advanced settings and make sure the top of the list is the IP address of the computer that you are not using the IP address, the computer is on the network. After you do this, the Run-Time VISA and the VISA server should focus on the same computer. Could you also make sure everything is configured correctly, as seen in the present document.

  I suggest also to research in panels of remote façade for your applications that is described here.  And here is information locking locking and unlocking of these applications.

• ASA VPN server and vpn client router 871

  Hi all

  I have ASA 5510 as simple VPN server and 871 router as simple VPN client. I want to have the user ID and permanent password on 871 and not to re - enter username and password since 871 uses dynamic IP address and every time I have to ' cry ipsec client ezvpn xauth "and type user name and password.

  any suggestions would be much appreciated.

  Thank you

  Alex

  Do "crypto ipsec client ezvpn show ' on 871, does say:

  ...

  Save password: refused

  ...

  ezVPN server dictates the client if it can automatically connect with saved password.

  Set "enable password storage" under the group policy on the ASA.

  Kind regards

  Roman

• Access to the internal mail (Exchange) by centimeters remote VPN server

  Hi all

  I have a problem in the configuration of ASA 5510 to access my internal mail (Exchange) through remote access VPN server

  one... I have set up my D-Link ADSL router to port before the SMPTP (25) & POP3 (110) to the external interface of ASA 5510 (192.168.5.101 255.255.255.0)

  b. How can I configure ASA 5510 (using ASDM) to portforward (SMTP POP3 110 25) to my internal mail server with IP 192.168.50.2 255.255.255.0

  c. my internal LAN network (192.168.50.0 255.255.255.0) is coordinated at 10.1.1.0 255.255.255.224 for vpn clients

  d. my IP of mail server (192.168.50.2 255.255.255.0) will also be translated while clients are accessing content through remote VPN access

  e.What IP (Exchange of IP of the server (192.168.50.2) do I have to set up in Microsoft Outlook (incoming & outgoing mail server), vpn clients receive using a NAT IP 10.1.1.10

  Here's my configuration details of access remote vpn

  : Saved

  : Written by enable_15 at 13:42:51.243 UTC Thursday, November 27, 2008

  !

  ASA Version 7.0 (6)

  !

  hostname xxxx

  domain xxxx

  enable the encrypted password xxxxx

  XXXXX encrypted passwd

  names of

  DNS-guard

  !

  interface Ethernet0/0

  nameif outside

  security-level 0

  IP 192.168.5.101 255.255.255.0

  !

  interface Ethernet0/1

  nameif inside

  security-level 100

  IP 192.168.50.101 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  !

  interface Management0/0

  nameif management

  security-level 100

  management only

  IP 192.168.1.1 255.255.255.0

  !

  passive FTP mode

  list of access inside the _nat0_outbound extended permits all ip 10.1.1.0 255.255.255.224

  allow a standard vpn access list

  outside_cryptomap_dyn_20 list of allowed ip extended access any 10.1.1.0 255.255.255.224

  vpn-ip-pool 10.1.1.10 mask - 255.255.255.0 IP local pool 10.1.1.25

  Global interface 10 (external)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 10 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 192.168.5.1 (D-Link ADSL router LAN IP) 1

  internal vpn group policy

  attributes of vpn group policy

  Split-tunnel-policy excludespecified

  Split-tunnel-network-list value vpn

  WebVPN

  xxxxx xxxx of encrypted password privilege 0 username

  attributes of username xxxxx

  Strategy-Group-VPN vpn

  WebVPN

  ASDM image disk0: / asdm - 508.bin

  don't allow no asdm history

  ARP timeout 14400

  Enable http server

  http 192.168.1.0 255.255.255.0 management

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-3DES-SHA edes-esp esp-sha-hmac

  Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA

  card outside_map 655535-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map interface card crypto outside

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  ISAKMP policy 10 3des encryption

  ISAKMP policy 10 sha hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  tunnel vpn ipsec-ra group type

  VPN tunnel-group general attributes

  ip vpn-pool address pool

  Group Policy - by default-vpn

  Tunnel vpn ipsec-attributes group

  pre-shared-key *.

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  management of 192.168.1.2 - dhcpd address 192.168.1.254

  dhcpd lease 3600

  dhcpd ping_timeout 50

  enable dhcpd management

  !

  Policy-map global_policy

  class inspection_default

  inspect the dns-length maximum 512

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  !

  global service-policy global_policy

  : end

  So can someone help me, how can I configure these tasks

  You can without problem

• L2 VPN and SSL VPN-Plus server on the same edge is not possible

  Hello

  Today, I was busy trying to test the L2 VPN functionality and I got an error message that I had no right to allow the 'L2 VPN server' when the SSL VPN-Plus feature is enabled on the server VPN of L2.

  Is it possible that these two can run concurrently?

  And what is the reason for which (technical) why it does not work, or may not work at the moment?

  The L2 VPN as well as the VPN-Plus SSL enabled overall feature works very well elsewhere, but with the server it does not work...

  OK, I should have been more precise here. It is using the same service on the GSS. You cannot activate both at the same time. This is how it is. Maybe this will change later.

• Can't ssh on Mac OS VPN server

  I can connect to my VPN L2TP server with my iPhone running iOS 10 through my network of data carriers and passed to my home network from Comcast, but everything does not work;

  What works:

  Access default Web site running the macOS Server using its IP address

  Public Web surfing

  I can ping my phone of any system IP address on my network

  What does not (what I tried):

  SSH to any system macOS on my network

  Access screen sharing on any system macOS on my network

  Resolve the local hostname to an IP address

  More information

  my iphone is running iOS 10

  My computers are running macOS Sierra

  I use Mac OS as host VPN server

  I use the client VPN L2TP iOS 10.

  Firewalls in the system is disabled.

  Typical VPN connections, you use the DNS server of your iPhone and not the DNS server of the network corresponding to your server.  In addition, Hello services are only available on the LAN.  So you have no way to resolve names to IP adrdesses for the network, you are VPNing.

  The only easy solution from an iPhone is to make a list of IP addresses and use them to connect instead of host names.  using IPs will work as long as your ISP does not also use the same internal (like 192.168 or 10.0) IP address than the network that you connect to.

• Need help with attention not approved VPN server certificates.

  I've been on the many other posts about it, and they all seem a bit different, so I started my own thread.

  I was sent to my users via the ASA AnyConnect 3.1.02026, and we all get the warning of the Cert of untrusted when connecting VPN server.

  When the ASA deploys the client, it puts the external IP of the SAA as the host name, which causes the error.

  So I have two questions: 1. How can I get the ASA to make host name "vpn.cfo.com" when a user installs the client and 2. How can I change my cert so that it does not show the internal name of the ASA and use 'vpn.cfo.com' instead?

  Here are all the news that everyone should not (I) help to think

  SSL-trust ASDM_TrustPoint0 OUTSIDE_PRIMARY point

  Certificate

  Status: available

  Of the certificate number:

  Use of certificates: Signature

  Public key type: RSA (1024 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Name of the object:

  hostname = ambossfw01.cfopub .net

  CN = ambossfw01

  Validity date:

  start date: 15:17:42 EDT June 2, 2011

  end date: 15:17:42 EDT May 30, 2021

  Trustpoints Associates: ASDM_TrustPoint0

  CA

  Status: available

  Of the certificate number:

  Certificate use: general use

  Public Key Type: RSA (2048 bits)

  Signature algorithm: SHA1 with RSA encryption

  Name of the issuer:

  CN = VeriSign Class 3 Public Primary Certification Authority - G5

  or = (c) 2006 VeriSign\, Inc. - authorized only use

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  Name of the object:

  CN = VeriSign Class 3 Secure Server CA - G3

  OU = terms of use at https://www.verisign.com/rpa (c) 10

  OU = VeriSign Trust Network

  o = VeriSign\, Inc.

  c = US

  OCSP AIA:

  URL: http://ocsp.verisign.com

  CRL Distribution points:

  [1] http://crl.verisign.com/pca3-g5.crl

  Validity date:

  start date: 19:00:00 EST February 7, 2010

  end date: 18:59:59 EST February 7, 2020

  Trustpoints Associates: _SmartCallHome_ServerCA

  Any help would be greatly appreciated.

  Hello

  Cisco has made a strict checking of KU and EKU in recent versions of AnyConnect, which leads to the warning you got.

  To my knowledge, if you go to 3.1.00495, you will not get this warning, if not, you need to get the valid KU and EKU fields in your certificate of ASA.

  To use specific trustpoint, please check the 'truspoint ssl' command in global configuration mode.

  Mashal

• VPN needs access to all external internal vpn traffic traffic all in tunnel

  Hello

  Could someone help me find the problem?

  I am ASA configuration as firewall + vpn server, essentially outside of the device's access T1 (there are two VLANS in inside via an iptables, outside of iptables is on the same vlan as insdie of ASA (192.168.5.1 and 192.168.5.2).)  VPN users are authenticated via authentication 2 factors (SDI, ip is 192.168.5.5) and get the ACL by local database.  pool of VPN is 192.168.6.1 - 192.168.6.15. pool of VPN is coordinated to the external IP address

  trying to access a remote host A from the host a is open for the IP and one specific Protocol. all vpn traffic are in the tunnel. the VPN user can connected and ACL vpnuser1_ONLY not working does not as expected.

  Here is the part of configuration:

  ASA Version 8.2 (2)
  ...........

  Route outside 0.0.0.0 0.0.0.0 xx.10.194.193 1

  Route inside companynet1 255.255.255.0 192.168.5.2 1

  Route inside companynet2 255.255.255.0 192.168.5.2 1

  Route inside companynet3 255.255.255.0 192.168.5.2 1

  Route inside companynet4 255.255.255.0 192.168.5.2 1

  ...............

  Route inside companynetn 255.255.255.0 192.168.5.2 1

  
  

  NAT (inside) 4 vpnpool 255.255.255.0 outside   <--------- is="" this="">

  Global (outside) 4 xx.10.194.238 netmask 255.255.255.255

  Split-tunnel-policy tunnelall

  .....................

  vpnuser1_ONLY list extended access permitted tcp vpnpool 255.255.255.0 192.168.1.28 host 255.255.255.255 eq ssh connect

  vpnuser1_ONLY list extended access permitted tcp vpnpool 255.255.255.0 74.2.23.195 host 255.255.255.255 eq ssh connect

  ............

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  VPN - connections 8

  VPN-idle-timeout 10

  VPN-session-timeout 60

  Protocol-tunnel-VPN l2tp ipsec

  WebVPN

  SVC Dungeon - install any

  time to generate a new key of SVC 8

  SVC generate a new method ssl key

  SVC request no svc default

  internal GroupPolicy1 group strategy

  attributes of Group Policy GroupPolicy1

  VPN - connections 1

  VPN-idle-timeout 9

  VPN-session-timeout 45

  VPN-tunnel-Protocol svc

  Split-tunnel-policy tunnelall

  WebVPN

  SVC Dungeon - install any

  time to generate a new key of SVC 15

  SVC generate a new method ssl key

  client of dpd-interval SVC 30

  dpd-interval SVC 30 bridge

  value of deny message connection succeeded, but because some criteria have not been met, or because of a specific group policy, you are not allowed to use the VPN features. For more information, contact your COMPUTER administrator.

  disable the SVC routing-filtering-ignore

  username vpnuser1 encrypted password xxxxxxx

  username vpnuser1 attributes

  VPN-group-policy GroupPolicy1

  VPN-idle-timeout 6

  VPN-session-timeout 20

  VPN-filter value vpnuser1_ONLY

  VPN-tunnel-Protocol svc

  value of group-lock COMAVPN

  type of remote access service

  tunnel-group DefaultRAGroup webvpn-attributes

  Disable group companyvpn aliases

  type tunnel-group COMAVPN remote access

  attributes global-tunnel-group COMAVPN

  address (inside) vpnpool pool

  address vpnpool pool

  SDI Group-authentication server

  authentication-server-group (inside) SDI

  LOCAL authority-server-group

  Group Policy - by default-GroupPolicy1

  tunnel-group COMAVPN webvpn-attributes

  activation of the Group companyremote alias

  I did anything wrong / missing?

  Thank you

  Yijun

  
  

  First of all, you can set "no nat-control" because once you have relieved of NAT, 'no nat-control' becomes disable anyway. 'No nat-control' is useful if you have no statement of NAT at all on the interface.

  Second, if you can't access the outside inside which is because you must configure the NAT exemption. Not sure if you have configured it.

  Here's the command:

  access-list allowed sheep ip 192.168.1.0 255.255.255.0 192.168.6.0 255.255.255.0

  NAT (inside) 0 access-list sheep

  You can then add all other subnets that are internal to the ACL sheep if you need VPN access.

  Finally, for the error message deny on access-group "OUTSIDE", you would need check if you have configured "sysopt connection VPN-enabled'. If it is disabled, it will also check the "OUTSIDE" interface for VPN traffic.

• Misconfigured remote VPN server by using IPSEC client

  I'm trying to figure out what I did wrong in my setup.  The environment is:

  ASA 5505 running 8.2 with 6.2 ASDM.

  Version of the VPN Client 5.0.05.0290

  I installed VPN ipsec clients both anyconnect and connected successfully to the remote access VPN server. However, the client doesn't show any returned package.  Thinking that I have badly configured, I have reset to the default value of the factory and began again.  Now I only have the configured ipsec vpn and I have exactly the same symptoms.  I followed the instructions to configure the ipsec vpn in Document 68795 and double-checked my setup and I don't know what I did wrong.  Because I can connect to the internet from inside network and I can connect to the VPN from outside of the network (and the ASDM Watch monitor an active connection with nothing sent to the client) I believe this is a road or an access rule preventing communication but I can't quite figure out where (and I tried the static routes to the ISP and a wide variety of access rules before rinsing to start) above).

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal group vogon strategy
  attributes of vogon group policy
  Protocol-tunnel-VPN IPSec
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list vogon_splitTunnelAcl
  username password privilege encrypted 0987654321 zaphod 15
  username password encrypted AaBbCcDdEeFf privilege 0 arthur
  username arthur attributes
  VPN-group-policy vogon
  tunnel-group vogon type remote access
  tunnel-group vogon General attributes
  address pool VPN_Pool
  strategy-group-by default vogon
  tunnel-group vogon ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:xxxxxxxxxxxxxxxxxxxxxx
  

  Looks like a typo for the Pool of IP subnet mask.

  You currently have:

  mask 10.92.66.10 - 10.92.66.24 255.255.0.0 IP local pool VPN_Pool

  It should be:

  mask 10.92.66.10 - 10.92.66.24 255.255.255.0 IP local pool VPN_Pool

  Please kindly change the foregoing and test, if it still does not work, please please add the following:

  management-access inside

  Policy-map global_policy
  class inspection_default

  inspect the icmp

  Then try to VPN in and see if you can ping 10.92.65.1 and let us know if this ping works.

  Please also share the output of: "cry ipsec to show his" after the trial, if it does not work.

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• Configure a VPN server on non-server version

  I have seen that it is possible to configure your Mac as a VPN server, even if you do not have the server version of Mac OS. Yosemite. Freeware such as VNC Enabler and VPN server Configurator can easily do that. So I tried. I forwarded your UDP, ports 500, 1701, and 4500 to the local IP address of my computer. I did the same for port 9 so I can wake on LAN. I made sure that IPSec, PPTP and L2TP passthrough are enabled (Linksys router). Nothing... does not work. The State of the VPN server says it is, but I can not connect from the outside. I can't wake the computer either, even if Wake for Ethernet network access is on. My IPS does not block these ports.

  Any idea?

  Have you checked to see if the ports are actually open? Check here http://www.yougetsignal.com/tools/open-ports/

  Also do you connect through a domain name or IP? If the domain name is set to the right IP?

  It works on the LAN if change you the server address to its local IP address?

• Best VPN server

  I use the VPN server through Server 5.1. However, I recently bought an EdgeRouter POE, and I plan to change to its VPN. Can someone offer advantages/disadvantages for one against the other?

  Thank you

  Jeff

  I have no experience using the EdgeRouter and it took quite some dig able to determine that this was the case to all VPN. It seems mainly focused on being a router Ethernet to Ethernet. However as mentioned, I finally found a reference, which suggests he can do the following VPN protocols.

  • IPSec Site to Site and remote access
  • OpenVPN Site‐to‐Site and remote access
  • RAS PPTP
  • Remote access L2TP
  • PPTP client

  Download and read the whole manual I don't remember not its VPN features.

  I can say that I gave up on VPN server own Apple as it supports only L2TP and PPTP that these two days are considered to be weak from a security point of view and which can be used for VPN on demand configurations. I now use StrongSwan5 which allows to make a Linux server

  • IKEv2 Site to Site and remote access
  • IPSec Site to Site and remote access

  Both being able to VPN on demand.

  IKEv2 is currently considered the most secure VPN solution. IKEv2 is supported the use of VPN client built into El Capitan and iOS 9.

  StrongSwan5 works with the built-in VPN Apple customer and StrongSwan5 supports the use of SSL certificates, it also supports force all traffic through the VPN - a common requirement of companies configuration VPN connection.

• Office locks upwards and not Windows Server 2008 R2 remote let me reconnect

  I was having problems connecting to a remote system with RDP.  The server is operational for several years and is one of the 4 servers identical servers located on the same site.  Recently, one of the other servers crashed I was remoting in a long time so I had to start using this RDP server in.  Once our on-site personnel COMPUTER redirected to this NAT. port forwarding by server, I was able to connect remotely to make some changes, including the addition of a role as a remote access server VPN using the Routing and remote access Server Setup Wizard and removing the component of protection against threats Symantec Endpoint Protection network so that I can use and configure the Windows Firewall.

  While working through the Routing and remote access Server Setup Wizard, my locked up and disconnected RDP session.  I was able to reconnect once on-site staff completed the wizard and restart the computer, but once I reconnected it, after a minute or 2 I was even once disconnected and could reconnect not until the server has been restarted.  I presume that add the VPN role affected my RDP access and decided to remove the VPN server role.

  Now, I can't RDP on the server unless it is freshly reset, and even then it only allows me to stay connected for a few minutes before the connection is lost and I can't reconnect again until the server is restarted.  A vicious circle; power of connection after restart, only to have the connection dropped and requires a restart to reconnect again.

  This server also hosts a database that client systems are able to access for a short period of time after before restarting their connection drops.

  I quadruple checked the inbound Windows Firewall rules, uninstalled application anti-virus completely, same goes for as much as duty get their request for removal to ensure each piece of it has been removed, and I always have the same question.

  The whole issue started when I tried to add the VPN role.  I can't uninstall and then reinstall the anti-virus repeatedly has not helped either, but as it is right now, I have a server who, shortly after the restart, is unable to communicate. not with the internet, not on the local network, not remotely.   On-site staff are trying their best to follow my troubleshooting over the phone, but he arrived at a point where I will have to find out what's wrong and provide an easy solution to remote, or make a trip to halfway around the world to try to figure it out myself (which would be EXTREMELY difficult/close to impossible right now).

  Quesitons:

  (1) why would I be able to connect to remote after the reboot and disconnected then shortly after? (Service/application causing the problem didn't start until shortly after a restart?)

  (2) why is it not only kill remote access, but access LAN and internet on the server?

  (3) what else can be verified to help diagnose and fix the problem?

  I did a lot of research on the web but haven't found identical to mine problems.  Is this a new problem or a bug?  I saw information about uninstalling a patch and a seen a fix for the problems of the RDP, but who wouldn't even help LAN and access on the internet server.  This server ran local client local RDP, access to the database access and could have access to the internet for the years leading up to the recent changes and issues.

  Edit: The pro I'm remote on the server is a system Win 7 Pro, and the database of customers are also Win 7 Pro.

  Correction of the problem.  Turns everything by making the configuration for VPN, incorrect information has been entered in the network link, causing the network to the bomb once VPN service started.

  There are several LAN ports on the server, and one of them was selected incorrectly and configured with the incorrect gateway IP address during configuration of the VPN server.  Once the misconfigured for the LAN port TCP/IP parameters have been removed, all was good again.

• How can I get all the connections on a windows 2008 r2 through a VPN server?

  How can I route all internet connections on a Windows 2008 Standard r2 through a VPN server?

  When I try to run just on an account administrator through regular networking, it hits the vpn in offline mode when someone else that the administrator is trying to distance in.

  I have to use a vpn, because I'm on a school network and have permission to use the server, but I have to do my own static IP address.  My solution for the static IP address, he ran through a VPN with data unlimited which ended with a dedicated static IP address.

  Everything on the server works when comes the administrator will connect.  Site Internet/game/file Services/Ect.

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/