WRT54GL Setup & SecureEasySetup disc

Similar Questions

• in the finder under devices, I see a remote disk. This means that someone has access to my computer and how to find and get rid of this or is it a disk bound one of my devices?

  In the finder under devices, I see a remote disk. It means someone has access to my computer?, and how find and get rid of it. Or is it a disk bound one of my devices? I have an iMac El Captan10.11.3

  # Remote disc is a feature that allows you to use the CD drive from another computer.

  It is always in the Finder, and when Setup a disc in another computer it will appear.

  It is perfectly normal.  No one has access to your computer.

  You can read more here:

  Use the CD or DVD drive from another computer with your Mac - Apple Support

• HP ENVY 17-2101EA charger what power?

  Hi all, I recently bought a used HP ENVY 17-2101EA on ebay, but it has no setup or disc changer. My main question is that when I look at the specs, they say that he uses a 120 Watt charger that seems reasonable given its size and strength, but when I look on ebay there are 2 Chargers announced that mention this laptop - one is 'real HP' and a 'compatible' but both are 90 watts.

  Is this false advertising or they will work and it is essential to have a charger 120 watts? If Yes, what is the serial number of the charger?

  The portable BTW has not yet arrived.

  Hello:

  The adapter a/c for your model is this one... AC adapter smart HP 120 W (PFC RC/V 3 - wire) HP Part # 609941-001.

  If you live in the United States, you must also order the power cord that goes from the wall adapter to the charger which is part of HP # 490371-001.

  Please refer to Chapter 3, page 25 of the the service manual on the link below.

  http://h10032.www1.HP.com/CTG/manual/c02772484.PDF

  You can order these items from HP on the link below.

  $63.00 for the charger and $39,58 for the power cord.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=DF66CA5B9E7744848548FDCD897DB7D5

  Or search eBay and other resellers by part numbers and see what you can find, you may be able to find in a State used to much less expensive.

  I would not take a chance on a charger with less power that is listed in the service manual.

  It may work, it may not, or the laptop can draw too much power and overheat the charger.

• Creation of Windows 7 install media on a flash drive by using diskpart or "what he had during it's pocketisesses?

  If you want a flash drive bootable, you must use a utility such as diskpart to do. Then by copying a DVD system will make him act as a bootable Windows installation media.

  A. make a bootable flash drive by opening a "Run as Administrator" command prompt to run these commands:
  DiskPart
  Select the disc 2 ('list disk' to determine the number)
  clean
  create the primary partition
  Select partition 1
  assets
  format fs = fat32
  Assign
  output

  B. copy DVD to Flash drive
  xcopy d:\*.*/s/e/f e:\

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

  The correct way if you want to make a flashdrive bootable for installing Windows. First, you will need to use a utility such as diskpart to do. Him, and then copy an installation DVD or ISO. He'll act as a bootable for the Windows Setup installation disc.

  1: insert a (8 GB) flash drive
  2: invite (GUEST of DOS) command
  3: DISKPART
  4: LIST DISK
  5: SELECT DISK (DRIVE NUMBER)
  6: CLEAN
  7: CREATE PARTITION PRIMARY
  8: SELECT PARTITION 1
  9: ACTIVE
  10: FORMAT FS = NTFS
  11: ASSIGN
  12: OUTPUT
  13: COPY ALL FILES FROM THE DVD TO FLASH DRIVE

• still not opening not CS4

  My program again is getting hung up on the initial splash screen.  Is there a file I can remove what could allow the program to open?  I rebooted a couple of times.  I tried to open as administrator.  It opens typically fine.

  Thank you

  Lisa

  Yes, that:

  Installation:

  -Look for the setup.exe (disc 1)

  -Right click, a window will open and you click Run as admin

  run:

  -On the icons of the various applications (again for example) right click

  -Select Properties

  -Select compatibility

  -Mark "Run as Administrator"

  -Select 'apply '.

  -Select 'OK '.

  That's all

  I have the Italian version of win OS and Adobe Applications, translation errors may occur.

  If it is, please forgive me

  Ciao

  Giorgio

• Cannot install Windows 7 Home of the installation disc. -E:\setup.exe isn't an application valid win 32 what that means?

  I want to upgrade Windows XP to Windows 7.  My disc of Windows 7 Home Premium (32 bit) could not run with the following message "E:\setup.exe is not a valid win 32 application.  I also tried my 64-bit installation disc and it failed also. They are of genuine discs purchased from a well known local firm.  What can I do now?

  Hello

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  See you soon.

• Me am XP license key do not have an installation disc. How to get a copy of the Setup disk?

  Recently, I bought an IBM Net Vista original case, a site auction like eBay, but for my country (Serbia). It came with a sticker with a windows XP Professional license print top (with all holograms too, so I think this is authentic). All components in this case are mine (MB, CPU, GPU, RAM...), and I don't have an original Win XP Pro Installation CD. Can I use this license number? If so, how to get a copy of the installation disc?

  Please see: How to replace Microsoft software

• Windows crashed, no disc to Setup xp disk need help to upgrade to vista or windows 7 (have keys)

  Crashed my windows and I do not have the vista installation disc so I used my brothers windows xp disk to install it and am hoping to upgrade to vista. Also, I bought windows 7 a week ago but could not install before my computer crash, so ideally, I'd like to get this performance as well. I have two keys for vista and 7, but I don't have the installation diskettes. Thanks for the help.

  Hello

  You can simply use your brother XP and then upgrade to Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Adobe Creative Suite 4 disc shows not all applications Setup

  I am using Creative Suite 4 (Web Premium). I had a license error that (apparently) required me to reinstall my Adobe Illustrator. So I uninstalled all of my Adobe (except Acrobat, I bought separately) products.

  Now when I go to reinstall using the diskette, none of the 'core' applications (Illustrator, Photoshop, Dreamweaver) appear under the heading "Available products" to install!

  I tried a lot of different things, including installing in safe mode.

  Anyone have any ideas?

  You can dl the Setup files or you copy files from your drive to a desktop directory.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• XP pro reinstall necessary but no disc to Setup HP DC7700

  My HP Compaq DC7700 had an operating system (Windows XP Pro), striped (a formatted drive). How can I reinstall the operating system even without original installation disk. I have the serial number of the product on the side of the tower.

  Hey, Dan:

  If they always available recovery disks, you should have no problem.

  In addition, get you them for free to the United Kingdom.

  Just call this number.  You will also need to provide the model # and the serial number for each PC.

  0845 161 0030

  Mon - Fri / 08:00 - 18:00
  (except holidays)

  Paul

• XP Setup won't find disc?

  I'm trying to reinstall XP after having a few problems which resulted in me having to format the drive. I created an active partition with Super Fdisk with Fat 32 partition. However when I try to run the XP Installer I get a message that XP does not find the disk. What can I do?

  Thank you

  Tony

  Delete the partition that you created and then boot from the XP installation disk to use XP built in partition and formatting features.

  J W Stuart: http://www.pagestart.com

• Im trying to install Flight Simulator, everything goes fine until I put the 2 disc in, it comes up with the error number: 0 x 80040702 and ends the Setup program! What should I do

  Lenovo Z570 Windows 7 64 bit

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  After the description of the question, I understand that you have problems with the installation of Flight Simulator on Windows 7 computer. I will certainly help you in this regard.

  This problem can occur is the facility can't seem to load the DLL: GameuxInstallHelper. I suggest you to refer to the help article and check if it helps.

  Error message when you try to install a Microsoft Games for Windows game: "could not load the DLL: GameuxInstallHelper.

  http://support.Microsoft.com/kb/968365/en-us

  Back to us for any problem related to the Windows operating system. We will be happy to help you. We at Microsoft try to provide our customers the best experience.

• have printer hp c309, says driver is not found, install disc stops to prepare the system to install, system can't find D:\setup\...\set\hp3prl40.exe...

  Convenience store said that no drivers are

  HP installation disk does not work (stops at the second step, called preparation for installation system)

  but the printer is recognized properly on the wireless network

  only, I don't get the option of making it the default printer

  system says driver not found WSD

  This printer works fine on my computer compaq laptop

  I can't make it work on my new toshiba

  the two win7

  Clean boot the PC http://support.microsoft.com/kb/929135

  Then install from the cd HP

  PS Troubleshooting will not help in these circumstances, other that provide the answer obvious re no driver

• Is it possible that I can transfer all my Windows Setup disc to another while retaining my registry and let my games installed on the original drive?

  I want to do is transfer my installation of Windows on a smaller hard drive while leaving my games on the current hard drive. I would also like to keep my registry so I need to reinstall the programs/games as little as possible. Thank you!

  It won't happen!

  Even if you succeeded in transfer Windows to another drive open programs that remain on the other hard drive will not be able to open.

  When programs have been installed, the locations have been written to the Windows registry would know where to find them.

  Your route only for what you want to do, is install Windows on the smaller disk and reinstall all your programs to the other disk.

• How do you put disc 2 in the Setup?  I want to install cs 2 and the adobe application disc 2 Setup program that has been downloaded

  all ideas

  You install any program of CS2 or suite starting with this link

  CS2 (or earlier version) software activation server replacement

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm