WRT54GS and xbox wireless

Similar Questions

• WRT54G and Xbox 360, with no internet

  New Xbox 360 hard connected to the router WRT54G, router recognize xbox but does not connect to the internet. What should I change?

  I found a solution. I stretched a tight 50 feet of cat5 cable for xbox to correct "weak signal". The other cable was a cat6

• Xbox 360 and xbox running live of laptop and wireless modem

  I'm running as my Xbox 360 and xbox live since my laptop via an ethernet cable. The internet connection is done by '3' wireless dongle. It has worked well in the past - until recently.

  Whenever I try now - setting up my xbox can't get an IP address from my laptop.

  I was on the site of Microsoft for answers and xobx and I start to beat now. I watched CSI and as I can see - everyhting should work fine.

  I have Norton Internet Security and Windows Firewall as my security systems.

  Any ideas anyone?

  Thank you

  Hello

  Try a tooth to disable Norton and undo redo the ICS.

  http://support.Xbox.com/support/en/us/NXE/xboxlive/getconnected/hcxl/consharing.aspx

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• WRT54GS and XBOX360

  I hope someone could help me to translate these instructions in what I do with my WRT54GS.

  http://www.Charter.com/customers/support.aspx?SupportArticleID=1967

  I found the MAC address for the 360, it's just that I don't know where can I go to make these types of changes in the Linksys router.

  I don't know how to get into my router configuration screen, I just need the instructions from there.

  My Xbox connects very well when it is connected to the cable modem only, but not through the router.

  Thank you!

  First of all is that your XBOX360 is a wired or a Wireless.Here are some parameters you need to place on your router to your XBOX work with the Linksys router, here are some settings that you can configure your router. You need to Hardwired anyone from your computer to the router.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1
  Let the empty user name & password use admin lowercase...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and the type of box in 53, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (2) on the second line in the box, type Application in PQR, in the start box, type 88 and type of box in 88, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable...

  (3) on the third line in the box, type Application in XYZ, in the start box, type in 3074 and end in 3074 box type, leave the Protocol as and under type 192.168.1.20 ip address and check the enable box and click on save settings...

  (4) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  5) click on Setup and change the size of the MTU to 1452 and click on save settings...

  (6) address IP, Goto settings XBox network settings and assign the following on the IP address of your Xbox and select manual IP settings:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (7) also assign DNS addresses on Xbox primary dns:-4.2.2.2... Secondary dns:-192.168.1.1

  (8) turn off your modem, router and Xbox... Wait a minute...

  (9) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

  I think this should solve your problem.

• Need help with a WRT54GS and a BEFW11S4

  I need a setting of assistance until a bridge (I guess that's what it would be called.)   The WRT54GS is connected to the Modem and sends wireless signals, but the BEFW11S4 will not find the signal wireless of the WRT.

  I tried to use the WRT without a bridge but after talking with Linksys, they said that the area that I'm trying to get a wireless signal is a Deadspot in the House.  What I wanted to do with the 2 units I have so it's pass down wireless signal to the BEFW then I could connect the laptop via Ethernet and an Xbox similarly.

  Is this possible and can someone give me advice on how this should be done.  I'm pretty knowledgeable when it comes to the computer, but this is a first for me and throw me a loop for.

  You can't connect two Linksys wireless router, they will communicate only when it is connected with all ethernet cables...

• Qosmio G20: Question about networking & monitor in and Xbox

  Just bought a G20 last week and I'm in love. First laptop I've ever owned and its worth every penny.

  A few scarecrows.

  I never received an antenna adapter to connect my in arial, but I'm sure I sohuld of fact. In the quick start manual of what it listed everything that I should received in the pack, and who was listed. Was not enough one - if anyone knows a number to contact Toshiba and get one of these sent to me? Can't seem to find one anywhere.

  Second... I'm going to my brother's computer network. Novice course of network, it does not work that well. I'm not sure whether if we need a router? I just want to connect to his computer and use the internet through that. As you would with a network cable. So he bought himself a wireless network card... but we'll be buggered if we can get it too work. Any advice or a definitive guide... or do we this router after all?

  And thirdly, sorry for the long post, but I'm playing my Xbox by the G20, but I'm having no luck what so ever. I plugged the monitor using the three composite cards (white, yellow and red) but nothing that passes through. The only way I've seen a photo is when you set up a decoder and it happens in a small box when its analyses for channels... but I can't select to see and it seems s delay 1 second.

  Sorry for the post long-term... just try to make it all sorted.

  Thanks in advance for any help.

  Hello

  You are right that the Qosmio is a very nice unit.
  But I'm not sure about the antenna adapter. I found the information in the user manual that the antenna adapter is optional. In this case the adapter will not always come with the laptop, but you can ask that the Toshiba service partner.

  Well well, on the network connection: If you want to connect two computer, you need a crossover network cable if you don t use the router. In addition, two laptop computers must be in the same workgroup. In addition, you must manually set the IP address, the default gateway and the subnet mask in the internet protocol TCP/IP properties.

  On the Xbox:
  If you want to know more on the connection of MCE and Xbox, see this Microsoft Web site.
  http://www.Microsoft.com/windowsxp/mediacenter/Extender/mcefaq.mspx

  Check also questions other messages of the forum on the Xbox:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9575&MessageID=33794#33794

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9756&MessageID=34462#34462

  Good luck

• Xbox wireless controller not connecting with PC, please help

  I tried on a PC running on windows 7 and windows xp.  I have both the wireless controller and the wireless receiver.  I installed the software, press the Connect button on the receiver and then pushed him on the controller.  The lights turn in a circle, then keep just 4 flashing, it never connects.  What I am doing wrong?  Thank you.

  Hello

  Setting up Windows Media Center

  To use Windows Media Center with the Xbox 360, you must have a computer running Windows Media Center. Windows Media Center is included with the following versions of Windows:

  ·         Windows 7 Home Premium or full, professional edition

  ·         Windows Vista Ultimate or Home Premium

  ·         Windows XP Media Center Edition 2005

  Step 1: Get the key Setup of Xbox 360

  1. on your console, go to My Xbox , and then select Windows Media Center.

  2. follow the on-screen instructions.

  3. write down the 8 digit Media Center Setup key.

  Step 2: Add an Extender on your computer

  1. start Windows Media Center.

  2. click on tasks, and then click add Extender.

  3. When prompted, enter Xbox 360 8-digit setup key.

  4. complete the configuration of the Extender

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-your-media-in-Windows-Media-Player-with-other-people-or-devices

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• WRT54G and WRT160NL Torrents

  OK so here is my setup. I have a wrt54g directly on my access to the internet at home. There his hard cable to my wrt160nl where my desktop computer is connected. I would like to open a port for a torrent program to use, but I have no idea how to do that. Ive looked around a few guides but haven't found one that works. any help is really appreciated! (im sure this has been posted b4 but still, I couldn't find any soultions for my situation)

  If you want to run the two WRT as a router and have two separate local networks, you will have a much more complicated installation and the port forwarding for your torrents can turn out to be complicated, if not impossible. You must configure the port forwarding on both routers.

  I highly recommend to use a single router with a LAN configuration. The second router will be used as a switch access point and equipment.

  For example like this:

  1. the WRT54G connect to your modem and a address LAN IP 192.168.1.1.

  2. the WRT160NL is configured with the address LAN IP 192.168.1.2. DHCP server disabled.

  3. the WRT160NL is connected by one of its ports LAN for the WRT54G. Do not use the internet port of the WRT160NL.

  The WRT54G deals now all functions related to the internet. Customers on the WRT160NL connect directly to your local network and through the WRT54G to internet. Port forwarding must be configured on the WRT54G and there only. It's the simplest and probably most reliable installation for you.

  Of course, you can also swap the two routers in the previous configuration, either you use the WRT160NL as internet gateway and the WRT54G only as an access point.

  The access points in both routers must be configured with different SSID as they use differnet wireless standards (unless you spend the WRT160NL wireless-g only).

• WRT54GL and Xbox Live

  Hey there everyone.  Lately I had problems with my WRT54GL and Xbox Live.  When I try to connect to Xbox Live, it fails.  When I do a network test to check what the problem is, it says that I'm connected to the Internet, but I can't connect to Xbox Live.  I have opened the appropriate ports on my router and have even tried to put the Xbox 360 on the DMZ.  No solution helped.  I also tried to disable the firewall router SPI and its SecureEasySetup.  Still no luck.

  I powercycled my all network equipment and called my ISP (Time Warner Cable). My ISP says that the problem is not on their end.  I plugged the 360 Wireless at first, but also tried plugging it directly into the router.  Xbox always gives me the same error. The only thing I can not try connect the 360 directly to the cable modem.  When I got my service installed in my new apartment, I forgot get address MAC connected to Time Warner Cable of 360.  Normally, this is a problem since the router's MAC is the only one that matters. However, this also means that I can't connect directly to the modem to see if it is really a router problem.

  If anyone knows a place or how to get it to work, I'd be very happy.  I know that the WRT54GL is not certified with the little "Xbox Live Compatible" stamp, if I need to get a new router is not totally out of the question.  I wanted just to eliminate any possible problems that might arise before that.

  Connect the router directly on your computer with an Ethernet cable, then download this to your desktop.

  Open your browser and type "192.168.1.1" with the URL of the box, the two username and password should be "admin" unless amended.

  Now, navigate to the administration tab and find the update of the firmware, and then install the file that you put on your desktop.

  You now need to reset the router, press and hold the reset for 30 seconds button and unplug the power cable for 1 minute.

  Log in to the router DHCP enable/change, 20 Mhz, SSID, channel 11 - band Radio 2.46Gh, then work on getting your security put in place again.

  Go into the settings advanced wireless
  Change the tag to 75 interval, modify the threshold of fragmentation to 2304, change the RTS threshold to 2304, now save the settings.

• have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  have hp2009m comp with windows vista, how can I get my xbox wireless remote to work on it?

  Hi Alex,

  You can view the following items and see if it helps.

  Connect a game controller

  Xbox 360 Setup

  How to connect a wireless Xbox 360 controller or headset to your computer

  Demonstration: Creating an Xbox 360 in an Extender for Windows Media Center unit

  You can also get in touch with technical support Xbox for the same thing.

  Xbox 360 support

   Hope this information is useful.

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Xbox controller will not connect to the xbox wireless receiver?

  I got my Receiver to finally work and now when I try to connect my controller that do not access, it just flashes continuous four lights repeatedly. How can I fix it?

  Hello

  Welcome to the Microsoft community.

  Of your posts that I understand that you are facing issues connect the Xbox controller for Xbox wireless receiver.

  Have you tried to use the controller on a different computer?

  You can see the steps from the following link and check if it works:

  Xbox 360 Wireless Controller disconnects or unable to connect

  http://support.Xbox.com/en-us/Xbox-360/accessories/wireless-controller-disconnects-frequently-or-cannot-connect

  Reference:

  http://support.Xbox.com/en-us/games/Xbox-controller-for-Windows-Info

  You can also contact Xbox support team for assistance:

  http://support.Xbox.com/en-us/contact-us?XR=footnav

  It will be useful.

  If you need assistance on questions regarding Windows, let us know and we will be happy to help you.

• Internet connection is lost in computer laptop and Xbox when I fill the network.

  Original title: the network bridge is being gay

  well IM one of the problems with my network bridge that I connected to my card built into my laptop and im for my throu xbox wireless bridge the LAN, and unless he is satisfied, I have internet but when I fill my connections he said: no internet access and I can not access the internet on my laptop and now my habit of Wi - Fi allow me to connect to what anyone I don't have the shared option on check and my connection is really horribly slow and its never been this slow before

  Hello
   
  1. when the question is is produced?
  
  2. you remember of any changes to your machine before the question?
   
  I would like you to follow the steps mentioned below
   
  Step 1:
   
  Instead of bridge, you should be able to share the connection from your laptop.
   
  a. Click Start, click Control Panel
  b. go to your network and sharing Center.
  c. on the left side, click on manage network connections.
  d. right click on your wireless network adapter, click Properties, click the sharing tab, mark the tab to share this connection
  e. click on apply, then try to connect to xbox with your ethernet cable, either incidentally, it must be a crossover cable in order to function.
   
  Step 2:
   
  Disable all security software temporarily and see if the problem still occurs.
  
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• home network problem: I am running Windows 7 and you want to allow a PS2 and XBox 360 to access on the pc programs

  I am running Windows 7 and you want to allow a PS2 and XBox 360 access programs on the pc. Is this possible? How can I make my pc a media for a network server home?

  Hello

  Thank you for writing to Microsoft Communities.

  I suggest to check the following links and check if it helps.

  Connect to Bluetooth and other wireless or network devices: http://windows.microsoft.com/en-US/windows7/Connect-to-Bluetooth-and-other-wireless-or-network-devices

  Add a device or computer to a network: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Establishment of a network domestic: http://windows.microsoft.com/en-US/windows7/Setting-up-a-home-network

  You can also keep in touch with the Play station 2 and the Xbox 360 support.

  Please follow these recommended steps and post if you still experience the problem.

• Can I connect Xbox wirelessly through the portable computer?

  Original title: laptop - xbox

  Ive had a computer laptop windows 7 and its connected to the internet via an Ethernet cable, is possible to connect my xbox wirelessly via my laptop. ive tried doin connection ad-hock, the xbox recognizes it but does not connect to it. What can I do?

  Hi Jim,.

  Thanks for posting in the Microsoft Community.  I am pleased to inform that you can connect using the Xbox wireless network connection.

  You can check out the following link and see if it helps.

   

  Use your computer to connect your Xbox 360 console to Xbox LIVE

   

  http://support.Xbox.com/en-us/Xbox-Live/connecting/wireless

   

  Also see this link: http://support.microsoft.com/kb/978618

   

  To help others, I ask you to contact Xbox support using the link below.

  http://support.Xbox.com/en-us/pages/default.aspx

  Hope it will be useful. Incase if you have further queries please reply and we will be happy to help you.