WRT610N and IpV6?

Similar Questions

• Caching server and IPv6 support

  Anyone know if it is possible to configure the server for caching to work if you are using a dual stack IPv4 and IPv6 network.

  When running dua-stack all client devices will prefer IPv6 when it is possible so set cache server service from Apple is to see every customer who logs as coming from a separate network rather than a single network. It doesn't seem to be a way to configure the server caching on OS X Server 5 for an IPv6 subnet, it accepts IPv4 addresses.

  Before that I have to submit this as a bug can someone prove me wrong with a workaround to get a double network stack to work with caching server.

  I got this job, it was just a matter of editing the configuration file server caching by hand to add the IPv6 range.

  The configuration file is located in /Library/Server/Caching/Config/Config.plist

  Make sure that the caching server does not work as you change the configuration file.

  Open the file in the Terminal for editing and search for the following text:

  < key > PreviousDataPaths < / key >

  < table >

  < string > / library/server/cache/data < / string >

  < / array >

  < key > region < / key >

  < string > 65622637284725D55356E27799AC1535 < / string >

  I will use the example of a range of IPv6 for the following subnet, 2001:377:3f:65ec: / 64

  Change the configuration file to add the IPv6 range as follows:

  < key > PreviousDataPaths < / key >

  < table >

  < string > / library/server/cache/data < / string >

  < / array >

  < key > PublicRanges < / key >

  < table >

  < dict >

  < key > first < / keys >

  < string > 2001:377:3f:65ec:0:0:0:0 < / string >

  < key > last < / key >

  < string > 2001:377:3f:65ec:ffff:ffff:ffff:ffff < / string >

  < / dict >

  < / array >

  < key > region < / key >

  < string > 65622637284725D55356E27799AC1535 < / string >

  Now add the TXT DNS record in the zone file located in /Library/Server/named/db.example.com

  _aaplcache._tcp 259200 IN TXT "prs = 2001:377:3f:65ec:0:0:0:0 - 2001:377:3f:65ec:ffff:ffff:ffff:ffff.

  Now start the update server cache and restart the DNS server if it is running.

• A protocol that would provide the service for IPv4 and IPv6 traffic? (RIPv1, RIPv2, RIPng, BGP)

  A protocol that would provide the service for IPv4 and IPv6 traffic?

  • RIPv1
  • RIPv2
  • RIPng
  • BGP

  Hi SandeepTandel,

  ·         Your computer is on a domain network?

  ·         What exactly is the question do you face?

  Here the following protocols provide for IPv4 and IPv6 traffic or respectively:

  Ø Bng supports IPv4 and IPv6 protocols

  Ø RIPng supports IPv6

  Ø RIPv1 and RIPv2 supports IPv4

  Let us know if this information useful.

• WRT610N and Motorola SB6120 DOCSIS 3.0 Cable Modem

  I've upgraded to the modem DOCSIS 3.0 in October due to higher bandwidth offerings of Comcast cable.

  Everything was fine until last week when I had recurring loss of Internet connectivity requires me to reboot/cycle my WRT610N and/or modem.

  I updated the firmware of the currently displayed 1.00.03 B15 and reset the router.  This did not help the situation.

  I also tried the suggestions mentioned here, including the Beacon Interval 75, threshold of Frag 2304, threshold RTS 2307, the wide-40 MHz Radio band.  Reset and cycled the router and modem after all this.  I also tried to power off my computer after each reset, all to nothing does not.

  I'm still losing Internet conncectivity several times per hour.  LELA is unable to repair the connection.  So far, the only solution is to reboot the router.

  Do I have a defective router (still under warranty), or is there a problem to interface with DOCSIS 3.0 modems.  Never had this problem with the old Comcast cable modem.

  My WRT610N is version 1 material.  Wireless encryption is WPA - AES, recommended by Beaver in a previous post in August.  Nothing is connected to the USB port on the router.

  Results of 'ipconfig/all' as follows:

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and parametres\joe > ipconfig/all

  Windows IP configuration

  Name of the host...: jb
  Primary Dns suffix...:
  ... Node type: unknown
  Active... IP routing: Yes
  Proxy WINS active...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : hsd1.ca.comcast.net.
  ... Description: NVIDIA nForce Networking Controller
  Physical address.... : 00-14-22-xx-xx-xx
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  IP address...: 192.168.1.107
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  Lease obtained...: Thursday, November 19, 2009 19:04:46
  End of the lease...: Friday, November 20, 2009 19:04:46

  I "x-out" the last 6 digits of my MAC address for security reasons.

  I would be very appreicate suggestions.  I strongly suspect that I would like to order a replacement from Linksys via warranty RMA router.

  Thank you for reading this.

  Sincerely,

  Joe

  Received the replacement router on 22-11-09.  WRT610N rebuilt with firmware v 1.00.03 B15.

  Installed with the current LELA software.  Wireless laptop was runing Vista 32-bit, Wired PC on XP Service Pack 3.

  Everything works normally again.  Replacement router dropped not a (wired or wireless) connection since its installation.

  I find that my original router (bought about 3/09) was defective.

  After replacement of the router, I upgraded my OS to Windows 7 (32-bit on laptop wireless, 64-bit Wired desktop).  No problem at all with the router.

  Hope this helps others.

  Joe

• Quality of Service with WRT610N and Vonage

  I try to get the quality of Service, in collaboration with my WRT610N and my Vonage device.  The WRT is connected directly to a cable modem, and the Vonage device is connected to the Ethernet 1 port.  I have configured the MAC address of the Vonage on the QoS tab as 'High' priority (done by selecting the 'voice device' on the drop-down list category).  In addition, I put my Vonage options (on the my account page of the Vonage site) to use the higher throughput (90 kbps, I think).  Any other setting QoS have been made.

  However, the router seems not to be the QoS application at all.  If I do any kind of surfing at all (dragging around on Google maps to load new pages of satellite is a good test), the quality of voice over a call during Vonage is very choppy.  What I have to do something else to make sure that the Vonage device gets highest priority?

  Follow these connection parameter:

  Modem (DSL/Cable)-> VONAGE-> WRT610N

  Your Modem must be connected to your VONAGE and your VONAGE Ethernet, plug it into the Internet Port of you router LINKSYS. You also check the VONAGE internet connection by connecting your PC to your Ethernet VONAGE before connecting the WRT610N router.

• WRT610N and compatible usb drives

  Hello

  Has someone managed to get a stable connection to the external hard drive USB on the WRT610N?

  I would use a hard drive enclosure that turns down the drive with a sleep mode for reasons of noise and energy.

  With the latest firmware (1.00.02 B10) I tried:

  Vantech Nexstar 3i with a Seagate 1 TB - works very well until the player will power mode how the router to start up export drive even if the USB is on and the management page shows the drive always connected

  Western Digital My Book essential 1 TB - the router is not even mount the external hard drive.  I tried everything... FAT32, NTFS... waited, plugged the USB in and out, power cycled the router...

  Any help would be appreciated, because I spent countless hours trying to get something to work.

  OK, I finally have a system of USB storage to work with a hard drive that goes to sleep.

  Looks like there's a previous WRT610N that does not have a version 1 on the stamp on the underside of the router.  This router did not work well with my hard drives.  I'm a worm 1 WRT610N and use mounts (1.00.00 B18) F/W, The Western Digital My Book essential 1 TB factory delivered and everything works fine.  On the USB data rates are approximately 2.4 MB/s via wireless with security AES .n and 5 MB/s via ethernet cable.  Funny is that more recent (1.00.02 B10) firmware will not mount drive Western Digital My Book.  Interesting that in the version notes it says «enhanced recognition of USB external hard drives»  Well, at least I'm happy with something that works; 4 weeks and many hours.  Unfortunately, Linksys does no more than F/W on their website, so I'll never upgrade in case I lose the ability to connect to my new hard drive.

• IPv4 and IPv6 connectivity says no Internet access

  My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.

  Hello

  Internet works with IPv4.

  I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack, MVP-Networking. WWW.EZLAN.NET

• IPv4 and IPv6 are not connected. How / can solve this problem?

  I have a laptop, Wi - Fi and Windows 7. Tried to install the Service pack update and had trouble completing install. Computer Retored previous date, and now I can't connect to the internet. My network is available, but get the error 'conncetivity' and 'limited access' error. When I pull the IPv4 and IPv6 "not connected read properties." Tried to config IP of the term, but nothing comes. I guess that no IP address. Not really sure what to do from here. In addition, something happened to all my previous dates "restore." Only available date is when I tried to install the Service pack.

  Hi JessB,

  1. what version of IE are you using?

  2. What is the full error message?

  Follow the following troubleshooting methods:

  Method 1:

  I suggest you run the network troubleshooter utility and verify the exact cause.

  Check out the following link to run the network troubleshooter utility.

  Using the troubleshooter from network in Windows 7

  Method 2:

  Perform the following steps to enable IPV4/IPV6 addresses.

  Step: 1

  a. open the "Network connections" window, right click to 'connect to the Local network' and click Properties.

  b. Select 'Internet Protocol Version 6 (TCP/IPv6)' and 'Protocol Version 4 (TCP/IPv4) Internet'

  c. click OK.

  Step: 2

  a. click "Start", enter "NCPA. CPL"(without quotes) in the search bar and press"Enter. "

  b. right-click on the network connection, and then click "Properties".

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click Select 'Protocol Version 6 (TCP/IPv6) Internet' and then click 'properties '.

  d. check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  e. click 'OK '.

  f. click Select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  g. check "obtain an IP address automatically" and "Obtain DNS server address automatically".

  h. click on 'OK '.

  Restart the computer.

  I suggest you perform the troubleshooting steps and run the hotfix in the following article to activate IPV6 protocols.

  How to disable or enable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7 and Windows Server 2008

  Method 3:
  

  I suggest you to rest TCP/IP and check its operation.

  To reset TCP/IP stack to refer to this article and follow the instructions.

  How to reset the Protocol Internet (TCP/IP)

  Method 4:

  Perform the following troubleshooting steps.

  Internet Explorer cannot display this webpage

• IPv4 and IPv6 connectivity

  I have wireless and connected displays IPv4 and IPv6 No. Inernet. Both can I or how can I connect to IPv6

  At this point, you do not have * need * IPV6 and is not something you need to worry. At some point in the future, IPV6 will become a big problem, but most of the devices now are not actively using it.

  I hope this helps.

  Note: If you Google IPV6 you can find a lot of information about this.

• can I configure an IPv4 address and IPV6 on the same NETWORK card

  I test double stack IPv4 and IPv6 on a firewall.  Can I configure IPv4 and IPv6 addresses on the same NETWORK card using a laptop installed with Windows 7, in order to test the firewall for both IPv4 and IPv6 protocols access? And if so, how to configure the NETWORK card?

  Thank you

  Jack P.

  See what...

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

• I have a computer that is running windows 7 on our network that there protocols in ipv4 and ipv6 and wont allow me to get rid of one.

  The problem is that they both take an IP is static and a dynamic that is playing with the other computers.Computer performs an IP address and I have someone lose their Internet connection.  Is a static IPv4 and ipv6 is dynamic.

  Thank you

  Ok.. What is
  Start > type cmd into the search bar > right click and select "Run as Administrator" > at the prompt of > ipconfig/release > reboot and see if it's still there.

• What is the difference between ipv4 and ipv6?

  original title: Internet connectivity

  What is the difference between ipv4 and ipv6 connectivity connectivity and which one should I use?

  IPv4 - https://en.wikipedia.org/wiki/IPv4

  IPv6 - https://en.wikipedia.org/wiki/IPv6

  IPv6 deployment - https://en.wikipedia.org/wiki/IPv6_deployment

• Cox and ipv6 connectivity

  I was told by Cox cable, since decmebre 2015 that the Airport extreme is causing intermittent problems with internet connection when you use the internet service from cox and this is due the iPV6 issue. They are trying to restore service, but have not solved the problem. Does anyone know what it is and how to turn off connectivity iPV6 on my extreme choices of internet options apple will affect my internet experience that is speed and safety, or not at all?

  Change the Internet setting for IPv6 on your AirPort Extreme could help maintain your Internet connection, which is more stable, but it will disable also any IPv6 service that may be available on the Cox system.  Security and connection speed are not affected.

  

  Another way to say the same thing, is that your AirPort Extreme will behave the same way he did before Cox began to incorporate recent changes to IPv6 in its system. Before Cox implementation of IPv6 changes, there is no problems with Apple routers.

  Apparently, Cox took the decision to implement IPv6 in its system differently than other suppliers, and it is causing issues with Apple routers. I don't know if other brands are affected.

  If it is an Apple problem or a problem of Cox is open to question, but it might be interesting to note that users of Comcast and Time Warner are not having these same problems with Apple routers IPv6, while we see many posts from users of Cox almost every day.

  I got IPv6 running on a connection to Time Warner here for about six months with zero problems. A friend who has Comcast service reports even.

  As far as I know, Apple has all the instructions on it, not is not possible to say at this point that the issue is all about Apple, Apple and part of Cox, or Apple is not actively involved in the problem at all.

• EA3500 and IPV6

  I would like to set up my Ver.1.1.39.145204 EA3500 to use IPV6 just to see if a difference, it was compared to IPv4.

  But I have no idea how to set it up.

  I am on Windows 7 and my ISP is Comcast.

  Under Convectivity, I have the following IPV6 configuration

  Automatic IPv6: enabled

  DUID has a set of numbers

  6rd tunnel disabled

  I saved this setting.

  I shutdown - unplgged modem - off computer computer and unplug the router.

  Reconncted and restarted.

  When I check my my IP address via internet, I'm still seing IPv4.

  Any help would be welcome.

  I got your ipconfig output and for your Local network connection, no address IPv6 do show. This means that IPv6 is disabled on your ethernet card.

  To enable IPv6 on the Local network connection:

  Panel-online network and sharing => change the adapter settings => right click on Local area connection, and then select properties-online check mark IPv6

  

  Then send me an another ipconfig

• WRT610N and WGA600N game help?

  Hey everyone I need help to find the best settings for wrt610n for games and it goes the same for the wga600n. whenever I play a game the connection falls for about 1 minute then I can play again. as he always says something about the strict firewall whenever I play war gear please help. Thank you

  I figured out problem that the triclk is if you play on a console or anything that allows you to take off the firewall, you need to do DMZ is enter the ip address for what you play and BOOM the connection is good. I turned on the 5gz return string and it works perfectly since there is no firewall to slow the connection on my xbox 360