Connect to the printer via wireless network

Similar Questions

• MacBook can not connect to the printer by wireless B110

  Hello

  Whenever I have enable WPA or WPA2 on WiFi security, my Macbook will not be able to print/scan to the B110 printer via wireless network, if I can access the printer with the IP on my browser and scan from the web interface. The PC in my house has no problem. In addition, my Macbook can print/scanning to the printer without any problems if no guarantee is enabled for the wireless network. What is the solution?

  I tried all the suggested solutions, including resetting the printer to the pref, uninstall the HP software, but in vain.

  Config:

  Mac OS X 10.6.6

  Updated to the latest HP printer driver (version 3.2)

  Router: A level WBR-6011

  Thanks a lot for your help!

  Richard

  It is a router that is provided by your ISP?  What is a DSL or FIOS service?

  If so, we will reinstall the printer this way:

  -Unplug the Internet line, which runs between the router and the wall
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the router.
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address). If you do not know, use the current IP address.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter your router's IP (its on the self test print) in the entry door and the first DNS field, leave the second blank.

  -Click 'apply '.
  -Finally, plug the Internet line, restart the router and the test.

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Computer cannot connect to the printer via the local network

  I have two computers sharing a printer, the printer is connected with USB is Vista Home Premium 32-bit. The other which must be connected wireless is old computer Windows 7 Home Premium.My, I suppose his ultimate, I'm not sure tho, that works fine with the printer. This Home Premium one just can not connect to the printer. It keeps saying can't find a print reader, I downloaded a universal driver HP that I learned other positions, and he said that it was not a correct driver.

  I asked our technical support to help me. And he told me that Home Premium has this problem. The only way I can solve this is to update my system at least pro. I checked online but I have not seen someone talked about this. Just make sure that is it true? If not, what can do now?
  Thank you very much.

  Hello

  -What is the brand and model of the printer?

  This isn't a problem with different versions of Windows support network printer.

  I suggest you go through the following links and check if it helps.

  Network printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-network-printer-problems

  Note: The steps are also applicable to Windows 7.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  Let us know the result once you have tried the steps mentioned in the link.

• Unable to connect to the printer via IP address

  I changed my ISP (internet service provider) and therefore changed routers - now unable to connect to the printer.
  I put a static IP address on my HP Photosmart B110a printer before we changed to ISP because there are connection problems. When we were setup to the ISP again, we are unable to connect to the printer, such as the printers IP 192.168.1.12
  The new network ISP IP range is 192.168.0.xx and printers address IP is out of the network.
  I can print via the USB cable but I can't return to my printers GUI by entering 192.168.1.12 return the printer back from the static IP address.
  A hard reset for this printer would be appreciated.
  Thank you very much.

  Hello
  I solved the problem. The answer was staring face heres so my solution for someone who has had similar problems.
  I didn't dig up the old router that affects the 192.168.1.xx IP network and then connected my PC, connected my printer then connected printers user interface through the static IP address, I assigned earlier. Changed to automatic IP. Connected my new router (which assigns the IP addresses of 192.168.0.xx) to my PC and printer. Everything is now OK.
  Thank you.

• HP LaserJet MFP M425dw 400 pro: cannot connect to the printer via USB

  Hello

  My problem is as follows:

  Since December 2014, the HP printer has been connected via USB to the desktop (at the time using windows 8.1) and by the network to other computers. The problem is with the 10 windows desktop where it is widely used for double-sided scanning.

  Yesterday morning I came only to find out that HP will not work in no case with Office for Windows 10 USB - connected, changed the ports that are 6, the cables, the office will say it is not connected. However, it connects through network for printing but not scan, it gives an error about Scanner HP not connected but will scan with Windows Scanner and fax with the printer using the scanner for the work of network folder - which can not scan two-sided.

  I uninstalled the driver, reinstalled with HP Support Assistant / downloaded directly from HP, same thing. The problem is that it be increased to 99% on the screen that shows the connection to the printer (the one detecting the USB cable) when it will say:

  "

  Error

  A Setup operation took too long to run. It is a fatal error, preventing the use of the product.

  If please restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. »

  I tried the original shipped with the printer CD, it gives the same error message.

  If anyone can help I will be very grateful. Thank you!

  Too bad! Fixed it myself using the Hp Smart Install supplied with the network interface of the printer.

• Satellite C660 now does not connect to the printer via Bluetooth

  I have a very small domestic network - 2 of the Satellite C660 using Windows 7 Home premium and a printer Photosmart more connected through BT Home Hub work all fine until a computer laptop suddenly cannot connect with the printer, well located 1 m from each other.

  Connection Internet is fine - and another laptop works perfectly. Message from the printer on statement failed, on examination, it simply records as "error."

  Any ideas of solution?

  Hello

  From this point it's hard to say what's wrong.
  In my opinion, you must reset all settings and configure the connection to the printer again.
  Reinstall the software that you have installed in the past.
  Also recommend check that the support from the manufacturer printer pages a few FAQ, HowTo, etc...

  Since your laptop can connect to the internet properly, it cannot be a laptop problem

• HP Deskjet 3830: Have repeatedly reset the printer's wireless network settings

  When I did a WiFi from my laptop to my Deskjet 3830, I does not specify the need for a password, but then when I came back the next day he asked my password (and refused to accept my normal netwrk password).

  I posted the question here, and someone told me to reset the settings of wireless network printer, who worked. But after a while, he returned to ask me the password and I have to reset again!

  How to avoid this problem?

  Greetings @peterB66,

  Thank you access the Forums from HP Support for extra support! I see you want to know how to stop the printer on an intermittent basis provide the password. I will do my best to help you with this problem.

  I suggest updating the firmware of the printer to see if it will help: DJ3830_R1604C.exe

  I'll send you another step to try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP Deskjet 3545: hp deskjet 3545 my desktop pc does not connect to the printer via the usb port

  Hello

  I installed all the drivers and the software correctly and the printer can communicate with my desktop pc for problem analysis, but when I open an editor like notepad, word, write something in them or when I open a photo and when I try to print, it cannot communicate with the printer. I used same HP print and Scan Doctor in order to study the problem by clicking on the button "Correct the impression", in the program, he sees even my connected printer (usb) or same (LAN), but printing HP and Scan doctor after reviewing all the steps and ticks as ok, when he said "try to send the test page" and when he tries to send it to the printer It does not send and I choose "no print" to see which program will thus be, discover the program this time said "send the in-house test page", and I chose this option to send it internally and the printer works. The program says "there is a problem which can not find this application for assistance. try to uninstall and reinstall the drivers as an adviser"but I uninstalled and reinstalled the drivers and seems that there is no error, or any problem with the drivers, but seems that it cannot connect to the printer, even if I can use the scanner of my office and it connects to the printer without problem. What can be the problem? How can we solve this problem? any help would be appreciated. Thank you. Windows XP Professional Edition, 32-bit SP3 is installed on my desktop.

  Sincerely

  Hello metehangunaydin,

  Please try the procedure below so that you can at least be able to print.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

• HP Photosmart 7525 PC connect to the printer via the wired network

  I install the 1 desktop computer printer that connects my wireless router with a cable, ethernet and 3 wireless laptops.  My main pc is the office.  During installation, the only options are to connect wirelessly or via USB.   When I select USB, the installer said I can't use all the features by using the USB.  Is it possible to install the printer with my desktop computer connected to my router via an ethernet cable?

  jconti01 wrote:

  .....  Is it possible to install the printer with my desktop computer connected to my router via an ethernet cable?

  Hello

  The answer is YES, you can connect like the following picture:

  

  Please see the following document:

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Problems of connection attempts WIN 2000 machine to the net via wireless network

  Sorry, I know this is an XP forum, it is a question of WIN2000 - I hope someone can help.

  I have a wireless network using WEP - try to connect to laptop WIN2000: router wireless card the two NETGEAR.

  I have configured the sw of the laptop wireless networking and now get indication * that I'm connected to the network *.

  However - to try opening a browser, the indication is that there is no internet connection available. (Side: if I run an ethernet cable into the port on this machine, I can connect.)

  Got a limited assistance of internet service provider - ran ipconfig / all.  One thing that seems to stand out is the line "' active... IP routing: No."-I'm over my head at this point, but that seems important to me. " Next line is "WINS Proxy enabled: No.»

  Can someone help me out here? The information I have provided is important? (I can provide more information to ipconfig) All I can configure here (? activate IP routing?) Other (s) diagnosis I can do?

  Any help would be most welcome!

  Kind regards

  Bob T

  Hello

  Win 2000 has no internal support for the wireless.

  In order to launch the wireless, you must use a wireless card that provides you with Wireless Manager and drivers for the card on Win 2000.

  Once you have installed the drivers and the utility is launched, you should power set up the connection to the router wireless.

  Start first with the security of the router, enable WEP, once you know that you can log in and access the Internet.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Jet Office Pro 8500 will not be printed via wireless network.

  All of a sudden, my printer does not print anything from any of my devices. Just print items get saved in the queue. The printer is connected to the router, all configuration and test pages that it's good and ready. I have windows 7.

  OMG! I can't believe that the fix was something so simple.   I had installed a new router.  Windows for some reason, creates a virtual printer with a disk of Web Services and the port (which did not work or I do not know how to configure it properly) and removed my printer "hard."  I went just to network, add a printer, it finds the printer hard origin, I added it, deletes it on the virtual ports of WSD, and now everything is new to print properly!

• WRT610N: portable computers cannot connect to the 5 Ghz wireless network!

  Hello

  I have a Linksys WRT610N (material v1) router, and I have configured settings wireless for the range of 5 Ghz and 2.4 Ghz

  wireless network, but the problem is that my laptop (wifi compatible n) detects the 2.4 Ghz network, but is NOT the

  5 Ghz network.  I have no idea what the problem could be :-(

  Here is my setup :

  (5 Ghz) wireless network settings :

  network mode: only wireless-n

  network name (SSID): WRT610WiFi-N

  channel width: auto (20 or 40 Mhz)

  broad channel: auto (DFS)

  standard channel: auto (DFS)

  SSID broadcast: enabled

  (2.4 Ghz) wireless network settings :

  network mode: Wireless - g only

  network name (SSID): WRT610WiFi-G

  channel width: only 20 Mhz

  broad channel: auto

  standard channel: auto

  SSID broadcast: enabled

  Security on the two mode is 'WPA2-personal' and "WPA-TKIP or WPA2-AES" encryption

  But my laptop do the WRT610WiFi-G and not the other :-(

  Currently, I am a bit disappointed as you can understand, but I hope someone here can

  give me a solution for this problem...

  Best regards

  Chris.

  Fix. Should be a/b/g/n

• Unable to connect to the printer via ThinPrint error: "serial0: unable to connect to the virtual printer daemon after 25 attempts." The device will be disconnected.

  I started this thread on the debate under of the "Fusion free v2.0.3" but Michael suggested I post this as a new thread, because it turns out that my problem was not due to the much discussed most recent update security Max OS causing ThinPrinting to break.  Whenever I have start up of my (Win XP and Windows 7) VM beta I get the above error message, and therfore cannot take advantage of the ability of merger of ThinPrint print on my printer Mac network.  Michael asked several log files, I have attached 3 in this post and others attached to my next post, so I hope you smart people of VMWare will be able to help me with this problem.  Thanks in advance!

  Ron

  I got a response from ThinPrint with a possible solution - the problem may come from a file/etc/printcap obsolete, which refers to a computer that no longer exists. The DNS lookup may be a delay of 30 seconds and can block the process of thnuclnt. The file/etc/printcap file contains a copy of the configuration of the printer, but it is not necessary for the thnuclnt. It is generally not yet created by OS X by default, but it seems that previous updates to the OS X system or printer drivers can be turned on at any given time. Subsequently, the option got turned off, but the old file was left with outdated information.

  Could you try to rename the file/etc/printcap file and see if it eliminates the delay of 30 seconds? To do this, run Terminal and use the following command:

  sudo mv/etc/printcap /etc/printcap.bak