Failed to add the service to the grey button vRA 6.2 Catalog Management-Add

Similar Questions

• Start button returns to the grey button (and other oddities of the taskbar)

  The Start button on my Windows 7 taskbar occasionally (as in, ~ every hour or two) past the Windows ORB with a touch of gray with the word 'Start '.

  

  This usually coincides with another strange in the toolbar behavior, such as the icons of the application not responding not to the mouse, not leaving the task bar (the icon will be highlighted as the mouse is always above the icon).

  Restart Windows Explorer (explorer.exe) temporarily solves the problem, but it will reappear over time.

  Any ideas on how to solve this problem?

  It was clear that some third party software causes this problem. Then, you disabled the services of boot, goto the same configuration window and select the services that you have disabled, one by one, to determine exactly the service that is causing the problem. Remember, Veuileez restart the PC for each service that you select.

  This will let you know the service that is causing the problem, and if this service is not so important, you can disable the service permanently.

• Cannot replicate the nice buttons

  Hello

  I'm no expert of fireworks, but I did my best to try and imitate these buttons nice I got to a linked web site work.

  I tried to play with the shadows and lights, but not yet the same quality.

  Pls help, would be ideal to find tips to make them. Thank you very much!

  I post here the jpeg-s. Only 3 are allowed.

  Vlad

  Oh... I misread your previous question. The line vertical and carved varies in color because it is at 25% opacity, which allows to blend with her colors under. Overall, there is variation in the background color which I think may be due to JPEG artifacts.

  The grey buttons below are to have the same treatment as the upper gray buttons, Yes, you may need to change the offset or softness on the shadows of get it exactly as you want once you set size. In addition, you will need to experiment with colors to gray blue and clear buttons.

• How can we enable the bluetooth on computer acer extensa 4420 laptop if the bluetooth button is broken or not working do not?

  you know in my laptop it is bluetooth (light in the equipment and printers in the control panel) but it seems that I am unable to work with bluetooth because I can't activate my bluetooth button is broken... Please get me out this problem... we cannot close on the bluetooth in the system... I use windows 7... I will be happy if you answer my question...

  If the Bluetooth button control, then it is managed by the hardware of the laptop and most likely is not under the control of software so can not be defined within Windows.

  At best, you may be able to set the default start state in the BIOS settings, read the manual of your system on how to enter the BIOS and make changes

• How to find quotes double in searching the Catalog Manager XML and replacement tool? Is it still possible without writing an XML file?

  I am struggling with the XML search and replace in Catalog Manager tool. I want to find a particular column, but due to generic problems, I want to find with the intact double quotes and then replace with double quotes too. For example:

  Front: "CSM_MBR_ASA_INP_EFF_DT"

  After: "Effective Member ASA entry Date"

  The problem with just the text, is that there are columns like CSM_MBR_ASA_INP_EFF_DT_NEW used in the reports that I don't want to touch.

  When I do the exact search and replace as above, I get no results.

  "

• % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  Hi all...

  I think % CABLE_MODEM_HWIC-3-CONTROL_PLANE_FAIL: RBCP failure: failed to add the service ACE flow - type Ethernet not supported

  on my 1841 which is currently set to L2L via internet cable. Anyone seen this before? I can't find anything on Cisco related to this.
  The tunnel rises and I got the same configs using DSL except interfaces are different. Thank you...
  My configs are below:
  crypto ISAKMP policy 10

  BA 3des

  md5 hash

  preshared authentication

  Group 2

  # address a.a.a.a isakmp encryption key

  ISAKMP crypto keepalive 20 periodicals

  !

  life crypto ipsec security association seconds 28800

  !

  Crypto ipsec transform-set esp-3des esp-md5-hmac xform

  Crypto ipsec df - bit clear

  !

  10 VPN ipsec-isakmp crypto map

  the value of a.a.a.a peer

  Set transform-set xform

  PFS group2 Set

  match address CRYPTO_ACL

  !

  interface cable-Modem0/1/0

  no ip address

  Bridge-Group 1

  Bridge-Group 1 covering-disabled people

  !

  interface BVI1

  IP address 98.x.x.x 255.255.255.224

  IP virtual-reassembly

  VPN crypto card

  Hello DialerString,

  I fear that the ACL is not related to the question, so I expect not to see anything in the debug output

  Hope to help

  Giuseppe

• WS-Security and proxy service: failed to add the identity security token

  What the reason of 'Unable to add the identity security token' fault in this situation (10.3.1):
  
  I did a simple proxy service "hello word" and tried to link custom policy.
  
  WS-Policy is planned:
  
  < wsp WSU: ID = "WS-Policy-Siebel.
  xmlns:SP = "http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702".
  xmlns:WSP = "http://schemas.xmlsoap.org/ws/2004/09/policy".
  xmlns:WSU = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < wssp:Identity
  xmlns:WSSP = "http://www.bea.com/wls90/security/policy" >
  < wssp:SupportedTokens >
  < wssp:SecurityToken
  TokenType = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken" >
  < wssp:UsePassword
  Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" / >
  < / wssp:SecurityToken >
  < / wssp:SupportedTokens >
  < / wssp:Identity >
  < / wsp >
  
  Process of WS-Security is set to "yes".
  
  During debugging, I see that all works fine - I can authenticate with the defined credentials and breakpoints in the proxy stream service works very well.
  
  But in the end, I get the error:
  
  SOAP fault:
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env >
  < env:Header / >
  < env:Body >
  < env:Fault >
  env:Server < faultcode > < / faultcode >
  < faultstring > cannot add the identity security token < / faultstring >
  < / env:Fault >
  < / env:Body >
  < / env:Envelope >
  
  In the console:
  < 09.06.2010 17:39:18 MSD > < error > < OSB security > < BEA-387023 > < an error occurred during the processing of incoming web service security response [error code: F]
  [Ault, message-id: 1721282272521583996 - 57dc4ccc.1291cc2282d.-7fab, proxy: OSB project WS-Security/WSSecurityService, operation: NewOperation]
  -Error message:
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > United Nations
  able to add the identity security token < / faultstring > < / env:Fault > < / env:Body > < / env:Envelope >
  weblogic.xml.crypto.wss.WSSecurityException: failed to add the identity security token
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processIdentity(SecurityPolicyDriver.java:175)
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:73)
  at weblogic.wsee.security.wss.SecurityPolicyDriver.processOutbound(SecurityPolicyDriver.java:64)
  at weblogic.wsee.security.WssServerHandler.processOutbound(WssServerHandler.java:88)
  at weblogic.wsee.security.WssServerHandler.processResponse(WssServerHandler.java:70)
  Truncated. check the log file full stacktrace
  
  Incoming soap message is:
  
  < soapenv:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:soapenv >
  < xmlns:soap soap: Header = "http://schemas.xmlsoap.org/soap/envelope/" >
  < wsse: Security SOAP: mustUnderstand = "1" xmlns:wsse = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" >
  < wsse: UsernameToken WSU: ID = "unt_TNNp0cBwU7HyPKoq" xmlns:wsu = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" >
  < wsse:Username > testuser < / wsse:Username >
  < wsse:Password Type = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText" > testuser < / wsse:Password >
  < / wsse: UsernameToken >
  < / wsse: Security >
  < / soap: Header >
  < soapenv:Body >
  < wss:NewOperation xmlns:wss = "http://www.troika.ru/Enterprise/WSSecurityService/" >
  < in > chain < /in >
  < / wss:NewOperation >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  Edited by: L. Andrey on June 9, 2010 17:55

  You are the WS-Policy liaison to the entire operation or only for the query part of the operation. If you link the WS-Policy for the operation, the policy applies as well to the request and response. If the response message also contains the WSSE headers with a name of user and password invalid. You can check this?

• Failed to add a program to the DEP

  Here's the question.  I play Day of Defeat: Source steam.  After one of their updates I started getting errors when I leave the game.  He told me that DEP closed the program.  I go to settings to turn off DEP for hl2.exe (the program for the game that crashes), but get an error saying that the program SHOULD run with DEP.  Now, just check the number, I take on my laptop that I use for the trip.  Running the same OS and I have exactly the same problem.  I fought back with this trying to get DEP to allow this program to run, but he used.

  I did the following:
  1 has attempted to add hl2.exe with the exception of the DEP.  FAILED
  2. enable DEP for programs and Windows services only.  FAILED
  3. people with disabilities all antivirus and firewalls. FAILED
  4 performed a clean boot by following the instructions on the windows support and repeated 1 and 2.  FAILED
  5 reinstall the game completely on both machines.  FAILED.
  Hl2.exe replaced with a copy of another steam game.  LET ME ADD THE PROGRAM TO DEP BUT ALWAYS CRASHED WITH EXACTLY THE SAME PROBLEM THEN WOULDN'T LET ME ADD BACK TO THE DEP.  FAILED
  6. update all the drivers I could think.  FAILED

  I did restart after each of these steps in order to ensure.

  I'm at my wits end at the moment.  I contacted STEAM on this subject, but they keep linking me to windows help links and have no idea why I can't add it to the list of DEP exceptions.  STEAM insists that it is a Windows problem, even if I'm having this problem on my desktop AND my laptop.

  Both systems are well above the recommended game system configuration, two systems working for several years with this game up to now, the two systems running the same operating system.

  Windows Vista Ultimate 64-bit

  It's weird because I can play the game very well, but it crashes whenever I stop.  It's really annoying.

  Hello

  Try to run the game in compatibility mode and check if that helps.

  See the link below to run a program in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Hello

  Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

  vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

  Thank you

  John

  Hi John,.

  This is due to host on the vCenter server entries. Please try the procedure below

  Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

  C:\Windows\System32\drivers\etc\hosts

  # 127.0.0.1 localhost

  Note: If a line does not exist in the hosts file, add it at the end of the text.

  #) to remove the comment from the line of IPv4.

  1. 127.0.0.1 localhost
     ·  Save and close the file.
  • localhost127.0.0.1.
    • GoTo services.msc and start VMware Virtual Center Services.

  Thank you

  Venance

• UCM - BPEL failed to retrieve the form of update process. Cannot run the service

  Hello
  
  
  I am trying to integrate the University Complutense of MADRID 10.1.3.3.3 with BPEL 10.1.3.5, I already installed the component of the UCM BPEL and updated the jar files in/custom/BpelIntegration/lib with the pot in BPEL.
  
  Also define the connection between UCM and BPEL
  
  the Configuration ID: Local
  Description: Local BPEL
  Domain: by default
  
  JNDI properties
  First factory of context: oracle.j2ee.rmi.RMIInitialContextFactory
  The provider URL: opmn:ormi://localhost:6105:oc4j_soa / orabpel
  Principal: oc4jadmin
  Identification of security information: *.
  
  When I test the connection it seems to be valid "JNDI parameters were validated successfully."
  
  but when I try to create a process with bpel configuration, the following ERROR Message appears:
  
  Content Server request failed
  Failed to retrieve the form of update process. Unable to run the 'getDeployedProcesses' of service method. (System error: runtime error: java.lang.IllegalStateException: can't replace cause)
  at java.lang.Throwable.initCause(Throwable.java:320)
  to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265)
  to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184)
  to bpelintegration. OraBpelHandler.getDeployedProcesses (OraBpelHandler.java:224)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:585)
  at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461)
  at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142)
  at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75)
  at intradoc.server.Service.doCodeEx(Service.java:488)
  at intradoc.server.Service.doCode(Service.java:470)
  at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350)
  at intradoc.server.Service.doAction(Service.java:450)
  at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191)
  at intradoc.server.Service.doActions(Service.java:445)
  at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111)
  at intradoc.server.Service.executeActions(Service.java:431)
  at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632)
  at intradoc.server.Service.doRequest(Service.java:1709)
  at intradoc.server.ServiceManager.processCommand(ServiceManager.java:357)
  at intradoc.server.IdcServerThread.run (IdcServerThread.java:195))
  + [Details] +.
  + Battery service for this request is - ORABPEL_PROCESS_UPDATE_FORM (* no captured values *) java.lang.IllegalStateException: can't replace cause to java.lang.Throwable.initCause(Throwable.java:320) to bpelintegration. OracleIntegration.getAllProcesses (OracleIntegration.java:265) to bpelintegration. OracleIntegration.getBpelProcesses (OracleIntegration.java:184) to bpelintegration. (OraBpelHandler.getDeployedProcesses(OraBpelHandler.java:224) at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:461) at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:142) at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:75) at intradoc.server.Service.doCodeEx(Service.java:488) at intradoc.server.Service.doCode(Service.java:470) at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1350) at intradoc.server.Service.doAction) Service.java:450) to intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1191) to intradoc.server.Service.doActions(Service.java:445) to intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1111) to intradoc.server.Service.executeActions(Service.java:431) to intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:632) to intradoc.server.Service.doRequest(Service.java:1709) to intradoc.server.ServiceManager.processCommand(ServiceManager.java:357) to intradoc.server.IdcServerThread.run(IdcServerThread.java:195) +.
  
  
  
  Can someone help me?
  
  Thanks in advance
  
  Carlos Pereira

  Hello

  Workaround for this problem is:

  Copy orabpel - thirdparty.jar/bpel/lib and place it in the folder/custom/BpelIntegration/lib , and add this variable in intradoc.cfg of the CS (stop the content server before performing this change):

  JAVA_CLASSPATH_bpel =/custom/BpelIntegration/lib/orabpel-thirdparty.jar

  Start content server after the steps above have been completed, and then test to see if the problem persists.

  Thank you
  Srinath

• Cannot install add-ons in Firefox 4 "[Add on] could not be installed because Firefox failed to modify the necessary.".

  I tried to install add-ons for Firefox 4, but were unsuccessful.

  If I try to install inside the about: addons, the add-on will download, but then the installation bar will not change.
  If I try to install from addons.mozilla.org, the add-on download but then I get a message in the info box on site (at the side of the address bar) which reads, "[module] could not be installed because Firefox failed to modify the necessary."

  If I try to install any other modules after that, I get an error.

  I'm under Ubuntu 10.10 on a Toshiba Satellite U400.

  On config variables xpi: enabled = true.

  I'm having this problem. I am also under Ubuntu 10.10 and Firefox 4.0 (Canonical version 1.0) 32-bit.
  When I try to install the Greasemonkey addon (and other addons), it downloads, but the installation progress bar remains at 0%. I can not also cancel installation. If I try, I get the error:

  Error: Cannot cancel install of https://addons.mozilla.org/firefox/downloads/latest/748/addon-748-latest.xpi?src=addondetail of that State (5)
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5168

  When you try to install, I get this error in the error console:

  Error: this.installLocation is not defined
  Source file: resource://gre/modules/XPIProvider.jsm
  Line: 5751

  I read on the troubleshooting page of Firefox that xpinstall.enabled should be set to true in the configuration: about, but there is not in my list of config, so I tried to add it, but it made no difference.

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3

  Impossible to install programs, download 1628: failed to complete the installation after the installation of service pack 3. What I have to do.

  Assuming you meant WinXP SP3...

  Why the SP3 was not installed for over a year?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install WinXP SP3?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]