WTF is the encryption on a pc

Similar Questions

• I would like to configure Firefox to use the encryption SSL 3.0 and TLS 1.0 - how do I do this?

  I have Firefox 29.0.1 - Mozilla26 - 1.0
  My instructions to fill out a form online for a work environment are the following:
  To configure Firefox

     Select Tools
     Select Options...
     Select the Advanced icon
     Select the Encryption tab
     Under Protocols, select the check boxes for Use SSL 3.0 and Use TLS 1.0
  

  There is no encryption for the Advanced icon tab. How can I update my encryption?

  I have the same problem, but my version is 31.0 this will also work for me?

• I'm on a macbook pro, and without knowing it, I turned to the vault of fire during a software update. The encryption process has begun. If I can't decipher, which will make my slow mac? or encryption is slow mac anyway?

  Hello

  I'm on macbook pro 13-inch (mid-2012), and without knowing it, I turned on the Arch of fire during a software update (El Capitan 10.11.5). The encryption process has started and if I don't want to read more, which will make my slow mac? or encryption is slow mac anyway?

  or at the end of the encryption process, my mac is slow?

  waiting for a quick response.

  Thank you

  Prosunkanti Sengupta

  I have a MacBook Air with active FileVault 2012. There is no significant difference in performance. Note, however, that there will be a performance impact until the original encryption is complete and that it doesn't have a way to stop it.

• FileVault2. The encryption is done on a per-user basis.

  FileVault2. The encryption is done on a per-user basis, or if the entire disk is encrypted.

  What is the best way to use FileVault2 on a new Mac, if there are multiple user accounts.

  Concerning

  the entire disk, but not all disks on the system as far as I KNOW.

• Restore deletes the encryption key?

  Hello

  I have asked a few people that already, but have not really gotten a yes / no answer. I know using "erase all content and settings ' clears the encryption key of your phone (6 +, existing iPhone running iOS 8.1) but to restore through iTunes does as well? I did a DFU restore both a regular restore.

  The phone is broken so I am unable to do anything on the device. I assure you none of my information bank or private photos can be recovered as I return to my operator to get a replacement with their insurance program. Are they renovate and resell it, I want to make sure that nothing can be recovered.

  Thank you

  If you have restored your phone as a 'new' device, with the help of iTunes, ALL your data has been erased.

• Activate the encryption to a secured in vibe x 3 area

  is it possible to encrypt only the area secure in vibe x 3?

  This would help maintain the applications requiring a device encryption separately... and not having is not the need to encrypt the entire phone...

  Welcome to the kumaranm forums!

  I checked the encryption settings on my X 3 the sample and it is there no option to encrypt the phone while you are in a secure area, this option is available only in the Open box. The situation is the same in Android Vibe P1 MM, so I'm in doubt that this will be changed after upgrading OS X 3 will get.

  Kind regards

• The encryption does not work on MOTO G 2nd Gen

  I tried to set up my email to work on my device and requires encryption to synchronize with a Microsoft exchange server. I launched the encryption, and he added a password as part of the process. When it's finished, he turned back and made me a password to decrypt the storage. I put the password that I created earlier in the process of encryption and it flashes the Android logo just turns off and then never light up again. I waited for an hour and then turned on manually and got the same decription password prompt. What the hell is happening?

  Some have said that a password may have already been created if it has been previously owned or stolen. This is not the case, since it is a new phone that I bought at Staples.

  Help, please! How can I solve this problem? I can't access my phone at all. So frustrating!

  I had problems before initial encryption as well - the solution I found was to remove Exchange, reboot. Then activate encryption, then add Exchange.

  If you can't get to everyone in your phone, you may need to perform a hard reset:

  https://Motorola-global-portal.custhelp.com/app/answers/prod_answer_detail/A_ID/101072/p/30, 6 720 919...

  Scroll down to reset data

• Regarding the encryption of files in Windows XP

  I never encrypted a file in Windows XP.

  Now, I have re-installed Windows 7 system.
  I would like to see Windows XP a file encrypted in the 7.But, I of Windows notes that only the texts in Greens and a folder. I don't see the encrypted folder.
  I ask how to see the contents of this folder? Thank you!

  You back up your encryption keys? If you do not, you can try to check with Elcomsoft (link below) to see if they can help you. If this isn't the case, then the data are lost.

  http://tinyurl.com/6l6xx - MS of information about EFS (Encryption)
  http://www.elcomsoft.com/aefsdr.html - encrypted files recovery application

  http://www3.telus.net/dandemar/encrypt.htm - encryption info
  http://www.beginningtoseethelight.org/efsrecovery/ - more information about encryption

  Encrypting File System (EFS) - http://windows.microsoft.com/en-us/windows7/What-is-Encrypting-File-System-EFS
  Methods recommended for the EFS - http://support.microsoft.com/kb/223316
  MS - MVP - Elephant Boy computers - don't panic!

• Why should I get invited to back up the encryption keys

  Running Vista Ultimate today downloaded a program called "Win32 Image writer" in order to write an ISO on a USB key file.

  I was unable to "just run the utility" as stated in the note "readme", just kept flashing to a BACK window when you try to run it.

  Tried to remove the program, but was told repeatedly that it was in use.

  Since that time I keep getting warnings of dire consequences if I don't support up to my encryption key.

  Restarted my PC and then managed to 'Remove the shift' all partners/records, some of whom are green in the Explorer tree.

  I've learned since that denotes encrypted files!

  I never asked to be encrypted, and now they are gone I always tells me to save these keys.

  I see that I have no other files encrypted on my machine.

  Can someone help me get rid of this warning, or tell me how to check if my machine has all of the encrypted files?

  Thanks Anil, but your statement:-"There is a possibility that the encryption keys are not recognized by the files."

  Implies that I have some encrypted files!

  This is the point, I have never actively sought encryption of one of my files.

  Encrypted files, I saw in the Explorer (shown in green) have been created by a program called "Win32 Image writer", which I had downloaded in order to write a file ISO of Linux on a USB.

  Immediately this program has been installed these encrypted files appeared and started to the harassing!

  I have no idea why the program should act with such stealth, I suspect it was something bad!

  I was totally unable to launch the application and decided to remove it, but it has not been listed as being installed in Progs & features and since there is no "Uninstall" file, I was reduced to "Move/remove" program folder and subfolders encrypted.

  After the second reboot, I had no other please "backup encryption keys", and I see there is no other "green" article in the Explorer tree.

  I am pretty sure that I eradicated the problem, unless there is a way I can force the system to show me if there are other encrypted items.

• the Encrypt contents to secure data check box is not available, how to fix?

  When you encrypt a folder, if you open the properties of the folder, and then clickAdvanced, check the Encrypt contents to secure data box is not available (it appears grayed out).

  Hi Panvis,

  If you want to encrypt a file or folder by using EFS (ENCRYPTING File System), but the Advanced button is not displayed on the Properties dialog box or the encrypt the contents of the box secure data is grayed out, it could be for one of the following reasons

  You don't have an edition of Windows that supports the EFS. You can use EFS to encrypt files on Windows vista edition full, professional and Enterprise editions.

  The drive that you want to encrypt files on is not formatted using the NTFS file system. EFS only works on computers that use the NTFS file system. If the file you want to encrypt is on a drive that uses the FAT or FAT32 file system, you must convert the drive to NTFS to display the Advanced button.

  For more information, see:convert a hard disk or partition to NTFS.

  This option is not available in Windows Vista Starter, family basic and Windows editions Home Premium, for more information see the link below: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-encrypted-files-and-folders

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• You can turn off the encryption on the 7840 with loly?

  don't really care about encryption and want to speed up a little more of the tablet.

  We can disable the encryption. I looked everywhere in settings and not been able to find a way to decipher.

  Maybe the bootloader?

  Not sure how I feel everything there is not not an option to encrypt or not not during the installation of loly...

  Perhaps small valleys way to say f - you to us to complain about not getting loly for months...

  No way to turn it off, once your tablet has been encrypted this is a fait accompli, no back the clock.

  Yes, it has exactly a little to high your from Dell, the programmer is always hitting his leg, laughing.

  Well at least you got the update, hope other tablets also get if my Tablet gets update, I'll download the update to unpack it, disable encryption, then install the update.

• How to change the encryption type M252dw printer WPA2 (WPA - PSK) for the WPA used by the router?

  We had to change the type of encryption on our WPA2 WiFi router (LAN setup origin, on which to install and successfully used our M252dw printer) and use simple WPA, to solve some other problems of connectivity.

  NOW, the HP printer, we have (M252dw) apparently does not automatically reset the encryption type.

  Apparently, he has no way to automatically start "from scratch" when connecting to the new configuration of router.

  Even with ALL the rest on the LAN works fine and speaking well, including WiFi laptops and smart phones, the HP printer sees the new name of WiFi SSD connects to the router in order to attempt a connection, accepts the new password WPA, but RETAINS THE WPA - PSK PARAMETER OF CONFIGURATION PREVIOUS.

  We know, because after that the printer fails to connect, print the network SHOWS Test report this known problem in the paragraph of the resolution of the problems, but worthless advice said to "run the setup of wireless network for re - enter your network WPA wireless security password. The WPA authentication on your HP printer has been changed from the default setting. This can cause problems connecting to your wireless network, if your wireless router does not use the same breed of WPA authentication.

  Well, DUH.

  Mind you, there is NOTHING in the post above that says:
  1) go to "this" menu item.

  2) click "this" option to change the encryption method.

  (3) select the method (SSID, WEP, WPA, WPA2) that corresponds to your router.

  ... because... There seems to be NO option ANYWHERE in ANY menu that offers this choice.

  HE DIDN'T THERE HAS NO BUTTON, OPTION, SELECTION, OR ADVICE IN THE MANUAL TO RESET OR CHOOSE WPA!

  There is a checklist wonderfully unnecessary, repeated throughout your manuals and on the site, basically saying

  ' Check the type of printer encryption (WEP, WPA, WPA2, etc.) corresponds to the router.

  Well well... What do you do when you KNOW that it IS NOT?

  Thanks to try at least, I appreciate it.

  Unfortunately, it did not work;

  but it leads to find the answer for later use.

  Summary -

  After selecting
  Printer flow treatment and deleted the saved connection data, an IPv4, subnet mask and default gateway address (router address IPv4) and IPv6 turned power on.

  Then... I did this:

  (1) Went back to and IPv6 turned to back, leaving only ON IPv4.

  2) went back to and returned once again the preferred settings.
  Address: 192.168.254.250

  Mask: 255.255.255.0

  Default gateway: 192.168.254.254

  3) reinforced by the "Wizard" where he immediately found the SSID of the wireless router.

  (4) select the SSID of the router

  (5) when it is asked for the password (which is actually just a 'word' with WPA pass) I got that.

  (6) given the printer attempts to connect and failed.

  WPA - PSK same listed, even noted on the test report from network once more.

  Therefore, no chance after Restore Defaults.

  It really would have been nice if HP had made sure this option actually actually reset * ALL * default settings, including the wiping WPA2 security type.

  (Just for reference, the DHCP range is set to 192.168.254.15 - 192.168.254.47, so that the fixed IP addresses assigned, like this printer, you can assign DHCP to be defined to ensure no changes outside.

  This printer is the FIRST device assigned a fixed IP address, to make sure that nothing else can come into conflict with the IP address and eliminate it as a cause as possible.)

  OK - so after your suggestion, I am inspired to re - enter the menu and look at it again.

  I had already looked through what I have and not able to find the submenu I thought that has been included by HP...

  .. .or I would expect a user was manually choose method/type of security encryption (SSID, WEP, WPA, WPA2)

  .. .or at least handed to "REMOVE/RESET/nothing: Please ask the next router you are trying to connect to use"

  One thing I found there is the option that resembled what I wanted now:

  That seemed to be the best thing after trying to 'Network Defaults' so I did.

  Then did a not through all the steps above, 1-6...

  * SUCCESS *.

  ALSO: The printer is already running on each PC had to be "retired" in Windows

  -According to the right

  -Then follow up

  -Waited for printer not found, click it, and then select

  Thank you HP - I just needed to find out who Reset was correct.

  
  Now - I humbly suggest stating that in the manual.

  Under the line "Verify encryption type corresponds to router", you could add something simple like:

  "IF it isn't, then select and your printer will automatically ask the next router you are trying to connect with and correspond to this type of encryption."

  

• Windows media player refuses to play a few songs I download on limewire. It is said that it is impossible to read the encryption of this codec. What can I install so that WMP can make me hear these songs? Email removed for privacy

  Windows media player refuses to play a few songs I download on limewire. It is said that it is impossible to read the encryption of this codec. What can I install so that WMP can make me hear these songs?
  E-mail address is removed from the privacy *.

  Hello

  • What is the format of the files you are trying to play?
  • You have any third-party media players installed on your computer?
  • Are you able to read the file in the built-in player of Limewire?

  For the types of files supported by Windows media player click on the link below

  Information on the types of media files that supports Windows Media Player
  http://support.Microsoft.com/kb/316992

  Concerning
  Anthony.

• Unexpected Windows 7 Pro Message on encryption of files, asking Me to back up the encryption key and password

  Have a desktop HP 590 t 2 - months old, Win 7 Pro 64-bit running.  Two days ago, I received an unexpected pop-up Windows message, saying something like "Files EFS in Windows."  When I click on it, I get 3 options:

  1 certificate of encryption and the emergency key and create the password
  2 ask me later
  3. do nothing... If you don't back up your key and the password, you will not be able to access the files.

  What is strange, is that I did nothing (that I know) which would cause no files to encrypt.  I don't know yet what it is, other than what I read in the help Windows.  I called HP Tech Support, they advised me to choose "REMIND ME LATER", that's what I selected.

  After that I turned the computer off yesterday morning, then turned it back last night, I had the same command prompt.  But he appeared at the start, then went off on his own.  I did have to choose anything.

  Since it is a new computer, I was installing software, but legitimate all software, such as Microsoft SQL Server 2008, Dreamweaver, etc..

  Here are my questions:

  1 - is Windows, or could some software I have installed, start encrypting files ON it's OWN?  I thought files could only be encrypted if I expressly and explicitly started encryption of files.

  2. is there a say if all the files on my computer are encrypted?

  3 is it normal that Windows prompts you on file encryption, after so many weeks or months of use?

  4. is there a way to get Windows to stop for prompting me on this subject?

  I read another post where someone said the same thing.  'Out of the blue", they got the same message, I did it.  There was no response to this post.  Appreciate any advice on what it means.  Thank you

  Ezgoin

  Thanks for the tips.  I think I may know what it is.  It could be the edition of SQL Server 2008 R2 Developer, I had installed recently.  Apparently, it encrypts certain files as part of its operation.  I read where it makes the encryption/decryption of files in real time.  I hope it's something 'internal' for SQL Server and will not affect anything else on my PC.  I use SQL Server 2000 on Windows XP for 10 years and has never seen this message.  Was only my PC Win7 64 bit for 2 months, so am always install software.

  If the OS Win7 can be noticed this and simply prompting me for a key.  I don't know if I should get just a key/password or not, just to be safe.

  But the message popped up when I used an option in a program to copy files to an external flash drive.  I checked, and none of the files on the flash drive, or in the folder root of the program on the desktop are encrypted.  So the time the message appeared might be a coincidence, as the copy of files from the flash drive.

  So far, everything works OK and have only seen the message once more, when I restarted Friday, then the message disappeared on its own.  Have not restarted since then but little time.

  If he continues to appear, will try your suggestion.  Thank you very much

  Ezgoin

  I never saw the message once more,

• Escape sequence in the encrypted data

  Hello

  I'm trying to read data from a file and write it in another file after encrypting. I use 16-bit AESEncryption thing Key.Every is fine. I am able to encrypt the data correctly. But when the decryption is done BadPaddingException.I lil bit of research and find that it throws a Badpadding Exception, because there are a few escape sequences in the encrypted data, such as \n, \r, \t, \f etc..

  One thing is if I encrypt and decrypt the data immediately without saving it to file it works fine. {But when I encrypt the data and file writing and later, when I decrypt the data, then I'm the exception (as I am reading line by line) if suppose my encrypted data is like this b}@\n<> and when I write file o, b} @ will be written on one line and

  As a quick ground, I tried this if the encryypted data is less than the length of the block which is 16. then I read another line and merge these data of bytes in 2 lines, by adding a 0xA in the meantime and passing this to decipher. Its not working properly. But what of the escape of another sequence like \r,\t and all. Can someone suggest me please how to deal with this.

  Thanks in advance

  I solved this problem by myself. We cannot replace \n, \r with a different value for byte. Because all the values of bytes will come up some or another. For my needs, I should identify each row of data. So here I can't identify each line \n and \r are present in the encrypted data. And I can not put any value to indicate the end of the line. So after working wrapper, I got a medium and it is. I will read the data to the first file, encrypt the byte data and convert each byte in the byte array resulting from float and will write that float one by one in the new file. And when playing I've read a floating point number and converts it into bytes and added to DataBuffer.Here I can identify easily, end of the line by putting my own val (when writing to the file) is not in the range of bytes val (i.e.-128 to 127), so if the defined end of line happens I get the byte of the buffer array and and this byte array data and This process continues until the end of the file is reached. I don't know whether there is a correct approach. But at least it solved my problem. I give this info here because if another is facing the same situation, so at least they will have some info from my exp.