WU - XP SP1 - > SP2 Installation hangs after download "Windows XP Informa" displayed.

Similar Questions

• Why did after downloading Windows security updates that Windows Firewall starts immediately after opening?

  Why did after downloading Windows security updates that Windows Firewall starts immediately after the connection?   This is happening with my PC and netbook, I almost hesitate to download the safety of dates in the future

  Hello

  1. What is the security update article?
  2. are there any other security software installed on your computer?

  If you have any third-party security software installed on your computer, I suggest you to disable the security software and then check if it helps.

  Note : If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  The firewall service Windows in Windows XP Service Pack 2, in the edition of Windows XP Professional x 64, Windows Server 2003 SP1 and x 64 of Windows Server 2003 versions may not start if the DCOM Process Launcher Service is disabled: http://support.microsoft.com/kb/892504

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users: http://support.microsoft.com/kb/875357

• HP ENVY tx1215 m6: after downloading Windows 10 bluetooth does not.

  Seen above Notebook, previous bluetooth not working properly.  HP service authentic carloss replaced recently the same thing. After downloading Windows 10, bluetooth does not work.  Please help in this regard.

  Aashrita Dule

  Hello:

  It is very unlikely that the Ralink bluetooth radio that has your model is compatible with Windows 10.

  The only suggestion I can offer would be to try the bluetooth W10 Ralink driver and see if it works.

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71572.exe

• XP hangs on reboot after download Windows Update & Installation

  Last Friday (September 16) after installing an automatic download of Windows Update (7 files) on my XP machine - SP3 OS, the restart procedure has begun to restart but "hung" just before the blue 'Welcome' screen, leaving a black screen with the cursor in the centre (cursor remains active). I suspect that a Windows or the files needed to move forward have been corrupted as a check of the HARD drive via another computer reports no problem with the drive.

  Finally I used the system provided by the OEM recovery CD to get the machine to boot into Windows, and although all the files that are on my "C" drive are still present, the Windows installation is actually a 'new' version of XP where any of my programs are available. In the root directory, there is now a second WINDOWS folder with the label "WINDOWS.0" that is clearly the source of the software used to initiate the Windows.My questions are:

  1. is there a procedure to "transpose" the old Windows installation in the new facility thus effectively regain its original configuration and my PC?... or

  2. I have to re - install all my software from scratch?

  3. If I have to can start from scratch with my programs I at least transfer my documents and settings (including emails) of the 'old' facility to the new?

  P. S.

  I know there is a 'Settings Transfer Wizard"but I think understand that it must be 'run' on a working version of the old installation of Windows first to generate the"file transfer"... it's clearly something that I'm unable to do.

  As an afterthought:

  Does anyone have any suggestions why or files could been corrupted because replace this (or these) would probably be the most elegant way to resurrect my machine to its original state?

  1 # because you used the recovery CD to do a factory reset, all your old data is lost.
  2. Yes.

  How to restore your Windows.old folder in a new Installation
  http://www.Vistax64.com/tutorials/237033-Windows-old-folder-restore-into-new-installation.html

  PS Windows is not booting from the folder windows.old against your perception.

• Computer hangs after installing windows updates...

  computer hangs after the installation of update.  Full system restore and the computer worked fine for a week. Has started having problems still... verified and automatic updates for windows have been downloaded and installed today. Confused about where to go from here. Help, please. Thank you!

  To be clear, the issue is not appeared since the updates have been installed one at a time, correct?

  KB2447568 is A compatibility view list update is available for Windows Internet Explorer 8:23 November 2010
  The KB updates a file in Internet Explorer.
  There is a small chance that Trend Micro has a conflict with the update. If this is the issue, then there would be more posts on this topic.
  This looks like a temporary glitch occurred.

  The only suggestion I would make is that when there are a bunch of updates, as there was in December, then it would be better to install the most complex by themselves.
  This would mean that changing setting Windows updates for "download updates for me, but let me choose whether to install them.
  For example, the cumulative update for Internet Explorer, KB2416400, would be installed last, and by himself.

  And, since you pick a time to install updates that have been previously downloaded, then you can install them in groups of 4 and If it is another problem caused by them or their installation, you will be able to refine specific update was the cause.

  Expert MowGreen Windows IT Pro - consumer safety

• After downloading Windows Service Pack 2, my computer is not able to sign Internet

  When I download windows vista sp2... I can't sign into the internet

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems after downloading windows vista service packs__

  After you download Windows Vista service pack 1 and 2 javascript no longer works in Internet Explorer, also firewall is still disabled.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot get get world of Warcraft to work after downloading Windows XP'Cannot world of Warcraft to work after the download of Windows XP

  Original title: can't get wow to work after downloading

  OK, so I downloaded WoW and everything was just great.  Then it says download patch, then he brought me to a screen that has been downloaded from the other stuff.  After that, he took back me to the screen of the installer.  It don't did me not the option to play or download any patches, instead, it gave me the option to download the game again.  However, I have already downloaded the game.  Why he let me fall used load patches?  I thought maybe it was a question of the user, so I took possession of the file, disabled sharing files, and I logged in as an administrator.  Still will not work.  I use windows xp professional.  Anyone have any ideas as to what is wrong?

  Hello

  ·        Where did you download the patch for the craft of war?

  ·        What is the version of the patch?

  Step 1:

  I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: Once you have finished installing, follow step 7 to start the computer in normal startup.

  It could be that the patch you downloaded is corrupt. I suggest to re-download the patch and then try to install it on the system and check out them.

  To further support I suggest you post on the world of the art of war forums. Click on the link below.

  http://forums.worldofwarcraft.com/

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can't burn the CD after downloading Windows 10

  After downloading 10 Windows on my HP computer, I can no longer burn my playlist iTunes on a CD.  How can I fix this problem?

  The upgrade of Windows 7 to 10 (which is what I assume you did) can be very tricky.  From what I hear, Microsoft did a pretty good job except perhaps to update the drivers.  (In fairness to Microsoft, there are a lot of flavors to them and they can be very tricky).  Try to go to Device Manager and see if you can update your drivers, especially the Apple Mobile Support & CD drivers (for your particular brand).  This can help:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• Lost audio on Satellite Pro A120-PSAC1E after downloading Windows updates

  Hello

  I lost all sound on my laptop after downloading updates for Microsoft XP from the Windows Update site. I followed the instructions on solving the problems on my laptop and uninstalled Microsoft WINMM WDM Audio compatibility Driver.

  I found afterwards kb 935448 XP update that is supposed to solve the audio problem, but this did not work. Now I want to reinstall the audio compatibility driver to see if it will work now, but I can't find anywhere to download.

  Anyone know where I can find this driver?

  Thank you

  Hello

  This issue has already been discussed here in the forum:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=21936

  As you say that the MS difficulty 935448 helped.

  You want to reinstall the audio driver and don t know where to find this driver?

  I visited the European Toshiba driver page and found the driver of his right.
  Simply choose your laptop download driver form. Satellite Pro-> Pro A120 PSAC1E-> Win XP

• HP officejet Pro 8500 909: HP Officejet Pro 8500 909 has not scan after downloading Windows 10

  About 6 weeks ago, I downloaded Windows 10.  Today, I tried to analyze something and received the message "no Scan Options".  So I tried to go to the Hp Solution Center and who do not respond. When I was on Windows 7, I have had no problem scanning or with the HP Solution Center.

  Hello

  You will probably need to reinstall the HP software after an upgrade of the operating system.

  Please follow the steps for exactly the problem and check for the difference:

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-8500-all-in-one-printer-series---A9/3752454/model/3752455/document/c04714314/

  Section ' can not analyze after upgrade to Windows 10 "should apply, or the"HP solutions Center can not run"or 'Scan is busy or in use' error with a connected printer"if it's the exact specified error when you try to open the HP solution... Center.

  If you need to uninstall the HP software, uninstall it by running the following remove utility Uninstall_L4:

  http://ftp.HP.com/pub/softlib/software12/COL31044/MP-77037-4/OJP8500vA909_Scrubber_13.exe

  Kind regards

  Shlomi

• CP1025nw Installer hangs after firmware update

  Downloaded and executed recommended for printer CP1025nw. appeared to be upgraded but stopped wireless update. I downloaded and ran the latest version of the software and drivers Setup, but it crashed right after installing the drivers. Printer working via USB (but accidents of system tray), and I wasn't able to restore wireless connectivity. I went back on the original and tried install disc, but it crashes during installation after installing the drivers. I tried to re - run the program to install firmware, and points out that the firmware is up to date. Is it possible to clean this problem or to restore an earlier version of the firmware?

  Hi jamesdlehman,

  What happens if you try to install the printer on another computer?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=LJ-86479-5&CC=US&DLC=en&LC=en&os=4063&Product=4052972&sw_lang=

• Windows 7 hangs after installing Windows 7 SP1 update

  Title of the Moose: Service Pack 1 Windows 7

  I loaded (KB976932) down.  Nothing but headaches.  Computer kept crashing.  has finally got the computer restored to the 22 but it still crashes.  How is it?  Nenah

  Hello

  ·         You receive an error message when the system crashes?

  ·         The system hangs at random or specific events?

  ·         Service pack 1 for Windows 7 installed successfully on the system?

  I suggest you to check the Windows Update history and check if updates have been installed successfully or not. Check out the link provided below for more information on checking update history.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  Windows 7 Service pack and other updates to Windows are released to improve the performance, reliability and security of the system, there could be several reasons why you experience performance problems on your computer.

  Try the following steps:

  Method 1:

  Run the troubleshooter of performance and then check

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  Method 2:

  If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• Acrobat XI has no installation, even after downloading program as well as trying to install from the disk (Mac OS 10.10)

  Hello

  Im trying to install acrobat XI on a macbook pro (OS 10.10) education edition

  I got the verification code registered with a serial number etc.

  However the installation keeps failing "Setup has encountered an error that caused the installation to fail. Contact the manufacturer of the software.

  are there problems installing this with Mac OS 10.10?

  hoping for the best

  This problem is now resolved. The program told me it failed when installing several times - but in fact, it worked then when I opened the document in the app folder.  I guess it's the elaborate rigormorle adobe wants its customers to submit but I'm happy, it works now.

• problems after downloading windows xp service pack 3

  I recently downloaded service pack 3 on my advent T12. It seemed to download very well and when it restarts automatically he started very well too, but when I tried to restart it then the log on screen did not appear; It started to load as usual and the screen with the windows logo appears, but then after that it was just a black screen, if the computer was still running. I was able to boot in SafeMode ok and took the restore point. After that it restarted again as usual, but I have no sound. I have a device high definition audio C-media. You can hear the sounds system, but nothing about DVD or music files. When I go to Device Manager it isn't even an audio device listed. I tried to download the driver from the microsoft update catalog, but I have no idea what to do with a .cab file once its downloaded. Whenever I restart my computer, looking for a PCI device it says that it cannot find the software. I've downloaded SP3 again and when I do it locates new peripherals - audio on bus high definition audio and successfully downloaded the software and I have her again but am back to the problem of having no log on screen! This time I uninstalled SP 3 in the Panel, and he warned me it would be it would cause a problem with the audio device. So I can SP2 with no sound, but the computer starts very well or SP3 with the sound, but it won't restart. I searched and searched on the internet and on the site of microsoft for some answers, but I'm a loss. Please can anyone suggest a solution? I'm not overwhelmingly technical. Thank you

  Since you have multiple problems with SP3 I suggest the Windows XP solution center where you will have access to technical support for your question - http://support.microsoft.com/ph/1173#tab0 Jim - MVP Windows Live - moderator of the Forum - Live One Care - Live Mesh - Microsoft Security Essentials online