Wyse C90LEW mounting kit

Similar Questions

• This HD for 2nd HD Pro A200 PSAE7E Satatellite mounting kit

  I have a Sat "Pro A200 PSAE7E and want to add a 2nd HD to your laptop, but it came without a 2nd HD mounting kit.

  Can anyone advise on what kit, I need to buy?

  As a matter of interest, I tried to mount the current HD in the second port and he won't, so I think that the mount is different?

  Your help will be greatly appreciated.

  Thank you in advance,

  Kenny

  Are you sure that there is a SATA connector in the Bay of 2nd?
  Check this first.

  If you have a second SATA connector, you can get a kit of mounting an ASP (certified partner).
  You can search on Toshiba Europe site: http://eu.computers.toshiba-europe.com

• FVS336GV2 19 "Rack Mount Kit - P/N: or SKU

  Hi all

  As indicated in the subject I am hunting the purchase of a mounting rack for our FVS336GV2 kit and could do with the Netgear part number to order if anyone can list please?

  The manual States on page 18 that it is part of the provided content then on page 22, the unit in the rack mounting mounting kit.

  http://www.downloads.NETGEAR.com/files/GDC/FVS336GV2/FVS336Gv2_RM_18DEC14.PDF

  However the Datasheet on the last page does not show as a part of the content provided...

  http://www.downloads.NETGEAR.com/files/GDC/datasheet/en/FVS336Gv2.PDF

  When I call netgear they keep telling me that the rack kit is p/n: 42010043-01.

  This kit is for the office series M4100 switch and will not agree to the FVS336Gv2.

  The M4100 DG12 is 328mm ~ 321mm width and the FVS336Gv2 is only 254mm wide.

  Even if the kit above mounting screw holes are the correct model to lay on the side of the FVS336Gv2 the ears would be too short to reach the edge of the rack mount amounts to mount even when.

  Kind regards

  Peter.

  Hi Peter_A,

  Welcome to the community.

  I regret to inform you that, it seems, there is just a mistake in the manual of the FVS336Gv2 so that it is not intended for rack design.

  Kind regards

  Rokhaya
  NETGEAR community team

• 2960 replacement rack mounting kit?

  Is it possible to get a mounting kit rack replacement for a 2960 48 port switch? I had a reading of textbooks but can't see a reference number specified. Part number asked (BT) is for the version 8 ports, which is not very useful.

  Thank you.

  This is the reference number:

  RCKMNT-1RU =.

  More info here:

  http://www.Cisco.com/en/us/docs/switches/LAN/catalyst2960/hardware/installation/guide/higinstl.html

  http://www.cablesandkits.com/Cisco-2960-series-catalyst-rack-mount-kit-p-198.html

  HTH

• PowerEdge Rack replacement mounting kit

  Hello

  I was wondering if there is a way to get the spare parts for rack mounting kits?

  We have servers where the kits were not used initially and now some parts disappeared.

  Is it possible to find spare parts?

  Thank you

  See you soon

  Bourne553,

  Yes, we can find the spare parts for you. Response with the serial number of your server to the e-mail address I will send you.

• DV6-2155dx LCD mounting kit

  I had my screws in a medicine bottle on my desk and my lovely wife ended up throwing it.

  Can Whare I get a kit with just the screws for mounting the LCD for my DV6-2155dx?

  I have everything else, just don't screw :-(

  Please visit this page HP Partsurfer for a list of parts for your dv6-2155dx. There are several sets of screws indicated, however it seems that "HP p/n 512362-001 - kit of various screw - for the Billboard" is the piece you're looking for.

  Please send Bravo

• is there any wall, mounting kits available for the iq500 or iq800?

  as per the title of the topic...

  Laptop HP ENVY 17-j005tx, HP ENVY 27 - k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server tilt, HP MediaVault 2020, HP ENVY 120 AiO Printer

  Then there is this one for the IQ500 series...

  http://EzineArticles.com/?HP-TouchSmart-wall-mounting-VESA-mount-adapter-for-HP-Dx9000-and-IQ500-series-TouchSmart-PC&ID=886040

• DV7-3160us - for the 2nd hard drive mounting kit

  Hello

  Sorry if the answer is posted elsewhere. I looked and you can't find one specifically for my model.

  I have a dv7-3160us, which has the secondary drive Bay.

  I have a second WD 500 GB SATA bare drive.

  Where can I get information on obtaining a mounting bracket so the cable appropriate to mount this drive naked in the secondary drive Bay?

  I was on the phone with HP tech supp, even after nearly 30 minutes to try to explain what I had it and still had no idea told me he ALREADY had a hard disk of 500 GB in it... :-) Enough of that.

  Any help appreciated.

  WP

  Never mind. He finally found.

  http://newmodeus.com/shop/index.php?Main_Page=product_info&products_id=222

• Kit - Cisco WLC 2125 of mounting

  It is said in the product for the wlc 2125, there is a mounting kit rack "for flexible deployment.

  Can someone tell me please in the right direction on the part number?

  Maybe it's the same for the ASA5505 kit, as the boxes appears to be somewhat identical... ?

  -OCEAN

  Hi Ocean,

  Yes, it's a good piece I guessing the ASA 5505 and WLC 2100 must use the same chassis.

  http://www.Cisco.com/en/us/docs/security/ASA/HW/maintenance/guide/procs.html#wp104420

  Or this one kindly provided by Scott;

  http://www.cablesandkits.com/Cisco-ASA5505-rack-mount-kit-p-1415.html

  I hope this helps!
  Rob

• HP Pavilion 27xw: HP Pavilion 27xw comes with VESA mount?

  Hello! Just ask, the HP Pavilion 27xw comes with a VESA mount? Thank you!

  Hello

  No, from his record:

  http://store.HP.com/wcsstore/hpusstore/PDF/v0n26aa.PDF

  If you wish, you can buy the following VESA mounting kit that is compatible with the 27xw flag.

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=8525135

  Kind regards.

• HELP with wall mount for the iMac-end 2012 model 27 in.

  Can someone help me please... I brought the iMac 27 in. in 2013. And I need to mount it on the wall.

  To my astonishment, I discovered that I can't get on the wall that my iMac is late 2012 model. And this model does not come with wall VESA opition.

  When I brought my computer, I was not put to the aware of the notice of wall-mounted or free-standing support.

  I spoke with tech support but no joy.  I was told to replace my iMAC or buy 3rd party mounting Kit. Unfortunately the 3rd party SDK does not solve my problem

  I wrote an email to Tim Cook, CEO, Jonathan I, Chief Designer but not heard of one of them.

  I would be very grateful if someone out there can help me with my dilemm.  Thank you hear from someone soon.

  Mrs. Regis Kishan

  See here http://eshop.macsales.com/item/Newer%20Technology/NUMNTIMVS/?utm_source=google&u tm_medium = shoppingengine & utm_campaign = go...

• I'm about to wall mount my Dell W4201C & need info on how to remove it from its support?

  I came across this forum hoping someone here enlighten me on how do to remove the 4201 C of its stand, so I can mount it on the wall.  When I received this TV a couple of years ago, he came with a mounting kit wall head but I just never had the courage to tackle mount my baby to a wall - so far.  I had the solidedly of support attached to two poles with 4 bolts provided last night.  Tonight, I'll have my son help me lift & lock in the wall plate but I (obviously) need to first remove the furniture.  Looking at the piece of furniture that is connected to the screen, I'm not sure if the two screws down that align with the support legs are that it secures for now or not.  I've always distrusted of simply by unscrewing things just to see what happens, I played have before getting internal parts to go where they are supposed to go because sometimes a screw has a different purpose...

  BTW, the stand was prefixed to the display when we removed the box otherwise I could remember what I did to tie in the first place!  Thanks in advance for your help/advice.

  p.s. I have owned my Dell W4201C TV since Christmas ' 06 & still love! Thought I'd get that road after reading some of the questions some owners have had televisions w/Dell.  I knew none of the questions & hopefully will remain free of problem for the full 60 k hours! Thanks again!    8-)
   

  
  

• cable caddy drive hard dv7

  Hello, I have a dv7-1135nr and I would like to add a second hard drive. I know I need the caddy and I was wondering if I need a cable to? I have f until someone know what caddy and cable I need and where to get them?

  Thank you, Greg

  What you need is the hard drive, mounting kit, which will have screws, cable connector and caddy... it can be ordered here... http://PartSurfer.HP.com/search.aspx?SearchText=605415-001

• Change the disc ssd end 2011 iMac 27

  I have a 'SMART' failure on my iMac 27 (mid-2010). I would like to replace it with a 500 GB SSD.

  Can it be done easy enough?

  Who should do it? Which drive would work best?

  And because of my limited knowledge 'internal' on a Mac, that should do it or where it do?

  What should I expect to pay for work?

  Thank you to all who take the time to help!

  Work on iMac becomes more and more difficult, but an SSD upgrade can be done. On your iMac 27 "2011, you have several options, including.

  • Install the SSD to replace the HD
  • Replacement HD and install a hard drive SSD behind the SuperDrive
  • Doubler data, remove the SuperDrive and replaced by a SSD or another HD.

  I would recommend that you contact OWC (www.macsales.com) and use their mounting kit or bring it in a CENTER to have the work done if you decide to do the work yourself is not wise. Here is a video that shows how to install the SSD behind the SuperDrive and includes the recommended tool kit. If you know not everything could be held in your area, please click the following link to find a:

  https://locate.Apple.com/country

  Good luck.

• HP ENVY laptop laptop 15-as032nr: buy 512 GB SSD laptop. You want to add additional 1 to hard drive. Can it be done?

  Hello

  I bought the HP ENVY 15-as032nr with only 512 GB SSD laptop. I want to add additional 1 to hard drive. Can it be done?

  Yes, you have the 512 m2 NVME PCI - e (lucky) drive gig and that goes into a slot and then there is also a slot open for a standard hard disk 2.5 thumbs or SATA SSD. See pages 30-33 of the manual here:

  Repair manuals

  It is likely that your laptop does not contain the HDD mounting kit and cable as shown on page 30 and 31 and this note is in the Manual:

  The disk spare parts kit hard does not include the rubber hard drive support or cable hard drive. The hard disk rubber support is available using the spare part number 857797-001. The hard drive cable is available by using the spare part number 857806-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857797-001

  https://parts.HP.com/hpparts/Search_Results.aspx?mscssid=F5105F025E184DADB5A6F058D84F0A48&SearchIn=PartNumber&SearchPN=857806-001

  An extra $ 66 for the housing and the cable seems a bit strong, but I couldn't find their sale anywhere other than HP Store.

  This isn't a simple upgrade; If you need assistance.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.