Xbox 360 Driver error code help 43

Similar Questions

• 80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  80072efe I have Vista Home Premium and I can't download updates it keeps giving me this error code help!

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  Service Pack 2 is installed? If it has been...
  How long this update problem occurred?
  What is the suite of security/antivirus installed and is a 3rd party firewall used?
  The current AV subscription and it detects malicious software the last time that the system has been analyzed?

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  You can reset the Windows Update components by running the Fixit on this page. But, if there is malware present, she will continue to reset the connection to the update servers:How to reset the Windows Update components
  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Vista firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  MowGreen Services update - consumer safety

• Set up Media Center using Xbox 360 as Extender fails - HELP!

  I use Windows 7 64 b Assus laptop and the new version of the Xbox 360 as a media center extender on a network home wifi elapse a router Linksys E4200.  I have Norton Internet Security (v18.6.0.29) and the standard Windows Firewall on my laptop.  I have configure manually all ports right on the Norton firewall as described in the Article ID: 911728 - last review: February 16, 2010 - revision: 6.0 entitled "Firewall Ports that must be open to use your Xbox 360 as a Media Center Extender.  I get throughout the series until the last step.  Both the Xbox and the laptop appear to expire and I get an error message on the xBox that says:

  COMPLETED CONNECTION: "the Xbox 360 has been disconnected from the PC Media Center.  For technical support, visit Microsoft Support at http://support.microsoft.com".

  If I do nothing, the Xbox will attempt to restart the connection three times until I'm finally getting a message that says:

  "Xbox 360 could not connect to the Windows Media Center computer. Turn on your Xbox 360 console off and then on again and try to connect again"

  I did this several times without success. I also disabled my firewall from Norton and my Windows Firewall but still no further.  The Media Center on the laptop says it is installed and ready to use and I do not see my laptop under video library on the Xbox, but when I choose what it I get an error message that says:

  "Unable to connect. Make sure that you have activated this console on your computer.

  I copied the last entries in the log events below that shows the last attempt I made to configure the Extender. You will see a newspaper where the Extender and successfully it implements and then several error messages that I can't understand.

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:07:26
  Event ID: 506
  Task category: Configuration
  Level: Information
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Media Center Extender account Mcx1-LESLEYSLAPTO-PC was created for the extender with the ID: uuid:10000000-0000-0000-0200-0025AE8C0070.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      506
      0
      4
      4
      0
      0 x 8000000000000000
     
      69
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      Mcx1-LESLEYSLAPTO-PC
      UUID:10000000-0000-0000-0200-0025AE8C0070
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:09:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      70
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:28
  Event ID: 593
  Task category: Configuration
  Level: WARNING
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Your Media Center Extender has been implemented successfully, but a firewall can block connect the Extender to your Windows Media Center PC (expired after 180000ms).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      593
      0
      3
      4
      0
      0 x 8000000000000000
     
      71
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      180000
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      72
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  The last five entries are exactly the same as above.  During this attempt, I had turned on the Firewall Norton back after that defining carefully all the rules required by the above mentioned article.  The results are the same if I have the active firewall or disabled - just says error message the connection has expired when the firewall is disabled.

  I hope someone can help me with this - I have spent all day trying to solve this and I'm at the end of my rope.

  OK, so I spent all morning pour on my router configs without success and then realized that my drive mapping had stopped working when I updated to my current router E4200.  So I double checked all configs in Windows file sharing and realized that I had activated password sharing which prevented the player sharing between my laptop and my laptop children without creating the same user accounts on each box.  Who sets and I was able to get my shared drives. Then I pulled upward to Media Center again and got exactly the same answer as before.  I thought I was really puzzled but thought I would try and open shared files, I could see on my Xbox AND THIS TIME IT WORKED!  It must have been the password of sharing that prevented the connections between the Media Center on my laptop and Xbox and he disguised himself as a firewall or setting a timeout problem that led me down the wrong path.

  Thanks for the suggestion check the router settings.  I would not have thought to double check my disk sharing settings otherwise.

• HP Pavilion 23 "TouchSmart: optical drive error Code 19

  Hi, the optical drive in my HP Pavilion TouchSmart 23 "does not work correctly. In Device Manager it says that it is the result of the conifguration in the registry being incomplete or damaged (error code 19), but I can't solve the problem. I tried to solve by updates driver and verification for the top and bottom filters using regedit, but none of those who were present. I can't find any other possible solutions anywhere. Thanks for the help.

  Hello:

  The only suggestion I can offer would be to go through the troubleshooting steps in the link below you haven't tried.

  https://support.Microsoft.com/en-us/KB/314060

• Card PCMCIA Avaya on a machine Satellite Pro 4320 - 31 to load the driver error code

  The machine works perfectly in all respects. Recently attempted to add an Avaya Silver wireless card to the system.

  Somehow the system has problems with the supplied driver. I have redownloaded the driver support site (now on version 7.62, the driver should support the card as a "Avaya Wireless PC Card".) I have to the latest driver available.

  Given that the machine works under Windows 2000, SP4 and all available patches, and yet didn't have questions about installing a card like this on a Windows 2000 computer before, I'm a little confused as to what may cause the problem.

  The card is detected properly, and the pilot is recognized. When installed the Device Manager still representing a yellow exclamation mark on the map of Avaya. When investigating this error shows that Windows 2000 cannot load the drivers on an error code 31.

  I found Code 31 made reference to possible support material that gives the questions. I turned my attention to the CardBus controller (ToPIC100 according to Device Manager). The version used is Microsoft, 20/06/2003, 5.00.2195.6717.

  Appearantly it is a newer driver (5.1.2600.0) but I failed to bring one downloaded. Seems that it is only available through Windows Update, which does not show the update as being available for the machine.

  Then... Anyone know how to get the map Avaya Wireless Silver active PCMCIA on a Satellite Pro 4320? I need a newer driver, or can not be done at all?

  [Edited by: admin on 26 June 05 20:19]

  Hello

  Can you please check this 2 & temp 108020 = .bucketID & PAGE = Document http://support.avaya.com/japple/css/japple?temp.documentID=127473&temp.productID=10763. Maybe it helps you too.

  Good bye

• HP Pavilion dv6-7020us: driver error Code 28 problems

  Sorry if this is kind of a long start...

  Read that a cause for Code 28 may be due again installed equipment that poses a problem of incompatibility, so...

  First stop, due to problem of hard drive, adequate to get a hard drive again earlier this year. The new current hard drive is "INTERNAL HARD DRIVES DO SAMSUNG Spinpoint M8 ST 1000 L 1 TB 5400 RPM 8 MB Cache SATA (looks like break after" 1000"and"SATA", that's all I can put in).»

  Got Windows 7 x 64 bit installed.

  Ethernet controller, network controller, peripheral PCI, PCI Simple Communications Controller, SM Bus controller, Bus controller series universal (USB) and x 2 unknown device (one of whom I assume is the fingerprint reader) all fail with the error code 28.

  The problem, however...

  With the help of other computers and the family, I managed to get the downloaded files specifically driver installation for Windows 7 x 64 bit, moved to a USB key, ran the files on my computer (with nonworking pilots / that responded to the questionnaire), they seemed of ran perfectly fine and appeared to install correctly, but none of the enumerated factors do not always work.

  Now currently at a loss to know what to do...

  Properties: Details: Hardware ID: value...

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C & REV_07

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  Network controller

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C & REV_00

  PCI\VEN_1814 & DEV_539A & SUBSYS_1839103C

  PCI\VEN_1814 & DEV_539A & CC_028000

  PCI\VEN_1814 & DEV_539A & CC_0280

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1818103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FFOO

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E22 & CC_020500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  (USB) Universal Serial Bus controller

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & BUBSYS_1818103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Unknown device

  ACPI\HPQ0004

  * HPQ0004

  Unknown device

  USB\VID_138A & PID_0018 & REV_0078

  USB\VID_138A & PID_0018

  . . . In my view, that it is all information. I'm sorry if I'm actually still lacking some information. Thanks in advance for the help! I look forward to the answer.

  Hello:

  Here are links to the drivers you need in the order you posted devices... just at the height of the sp # with those on your USB.

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56167.exe

  Network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp57538.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56166.exe

  PCI Simple Communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp56158.exe

  Controller of Bus SM: NOTE: first install this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp56156.exe

  Controller of universal serial (USB) Bus:

  This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

  File name: sp56164.exe

  ACPI\HPQ0004:

  This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

  File name: sp61037.exe

  USB\VID_138A & PID_0018:

  This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

  File name: sp56403.exe

• Trying to access the hard drive - error code 0 x 80070005

  I'm trying to be able to access my hard drive in my network and when I try to access my drive I get this error code

  Hello

  Maybe this can help,

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/bda85413-231e-4b56-bd8f-cd84cf925d20/

  Jack MVP-networking. EZLAN.NET

• 303 hard drive error code, how to replace

  I have run diagnostics from the system on my laptop and learned that the hard drive has not give the error code 303.  It came preloaded with 7 Home Premium from Windows OA.  We do not have a backup image or installation disk.  The laptop is old and out of warranty of 2 years.

  Should what hard drive replacement options I look for?

  Also, what options I have to install Windows 7?

  News of the laptop:

  product: HP Pavilion g series

  s/n: [personal information deleted]

  p/n: LZ514EA #ABU

  Model: g6-1184sa

  Hello

  Firstly, regarding the disk HARD, your laptop is listed as coming with a 500 GB hard drive, but you can just as easily install a 750 GB HARD drive if you want a little more than space - readers at the following links are examples that would be perfect for your laptop.

  Hard drive 500 GB

  750 GB hard drive.

  The procedure to replace the hard drive starts on Page 54 of your maintenance & Service Guide.

  Regarding the reinstallation of the operating system on the new drive, there are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.  The following link guess that you live in the United Kingdom.

  Order recovery HP. - UK discs.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Equium A110-233 drive reads not not drives - error code 39

  Drive not reading all discs.
  Something to do with the driver. Far as I can tell it says error code 39.

  Hello

  Please try the first method:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  You will find a link to the MS site that provides a nice solution.

• Xbox 360 Driver does not

  I have a gamepad XBOX 360 Madcatz.  It worked fine with Windows Vista Home Premium 32 - bit, but since I updated to Windfows 7 Ultimate 64 - bit, it has serious problems.

  A summary of the questions is as follows:

  The buttons are always involved, A is X, RS is start, (etc.) and the Joysticks roll wildly when I start calibration, out of control.

  I've tried every Driver Microsoft I can find and even the XBCD drivers, who sometimes make the pad that is undetectable by most of the games and even my PC...

  Because Windows doesn't let me at least change the buttons ios (for instance the switch button 2 x instead of B) it in any way to solve this problem?

  I found the problem: it is not the controller, it's just the Ubisoft games for most...  Especially with Splinter Cell: Conviction.  Seems they have worse support of controllers, as well online does not work.

  Thanks for the reply and take time out of your day, but the Comptroller works very well: Ubisoft do lol.

• hard drive error code

  My son has a laptop Inspiron 15 with a 500 GB SATA hard drive.   It's a little more of 2 years and is

  little used.

  Recently, it wouldn't boot into Windows.   I was able to run Dell built-in diagnostics and all tests passed,

  except for the hard drive.   Returned message says Error Code: 2000-0151; validation 19717; bad hard drive 3rd = status.

  Any ideas on this subject, other than replacing the hard drive?

  Thank you.

  dsmith8404

  Error code 2000-0151 refers to a failing hard drive / has failed, you will need to replace the hard drive with a new one.

  Bev.

• portable device driver error - code 31

  Gidday everyone,.

  Rig = AMD Athlon II x 4 620 clocked at 2.6 ghz, 2 GB Ram, Win 7 Ultimate 32 bit SP 1 on Asus M4A78

  bios mod-

  config sys: ide to ahci (to improve the rate of the ISF, NCQ; using sata, ide, no raid)

  reset for win 7

  blue screen

  back to ide

  reset

  www for solution - registry mod help:

  KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\msahci

  CHG of DWORD from 3 to 0

  reboot ok for Win 7

  improve the exchange of data

  started victory day

  installed optional AMD - other materials, Storage Controller - AMD SATA controller,

  published March 2013

  Update said "with success."

  Reboot as required by the update

  Device driver error 31 on portable devices

  (Two) WPD filesystem Volume driver

  :-(

  Active BIOS, no change

  reset

  BIOS - return to the ide

  Restart

  no change, still error 31

  Restored AMD update

  error 31 remains

  hands up in the air

  NB. earlier this year the experience even device driver error 31 on portable devices on portable devices for WPD filesystem Volume driver. Investigations at the time found no solution. However, think has an update of the applied victory since then "arranged" the error. The error was not apparent immediately before the update to AMD.

  Grateful for the help please.

  Have '

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand your concern and will help you solve this problem.

  I suggest you try using the steps described in these Microsoft help articles and check if it helps.

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Restore a driver with its previous version
  http://Windows.Microsoft.com/en-us/Windows/restore-driver-previous-version#1TC=Windows-7

   

  I hope this helps. If the issue is not resolved, please get back to us and we would be happy to help you.

   

• Satellite L300-1BW - 19 on CD/DVD drive error code

  Hello people, Satellite L300-1BW my wife lost her DVD player - manager of material properties gives the following error:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  I tried to uninstall the DVD driver, then reboot to let her re - install, but it still comes back with the same defect :-(

  Any ideas anyone? ?:|

  Hello!

  Try to delete upper filters and lower, as in this Knowledge Base article Microsoft has offered:
  http://support.Microsoft.com/kb/314060

  (1) run Regedit (start > run > Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Good bye

• laptop G62-b98ED: 0xe0f00013 during recovery (new hard drive) error code

  In the HP Support Forum Iread the code 0xe0f00013 error during recovery (new hard drive).

  In this article, I go the Digital River en download Windows 7 Home site (http://msft.digitalrivercontent.net/win/X17-58997.iso)

  Unfortunately, this link is broken

  ("The Page or file you requested cannot be provided

  The resource you are looking for has been removed, had its name changed, or is temporarily unavailable.
  Error HTTP 404 - file or directory not found. »)

  In ths page I be called Micrrosoft to download on their site. After typing the registrationkey it says:

  'Product not supported '.
  The product key you have entered seems to be the software that was preinstalled on a device. Contact the manufacturer of the software device for recovery options. " »

  You have a different link to download the ISO of windows 7 Home Premium?

  I have not personally used this download link, but they seem to have good answers/responses from users it and 33K followers on Facebook.

  http://getintopc.com/softwares/operating-systems/Windows-7-Home-Premium-free-download-ISO-32-bit-64-bit/

• Hard drive error code 301

  Can I replace/recover my hard drive after receiving the error message "drive smart error 301"?  I have a PC laptop HP G72-253NR, product # LG583UA. I received the error message and now when I turn on my system it will start not and will be automatically forwarded to the Startup Repair. Then, I get the message "a hard drive problem prevents Windows to start."  This leads me to believe that my hard drive failed completely.  My laptop is no longer under warranty and I need a quick inexpensive fix. Help, please.

  Hello

  The Smart 301 error would indicate the drive is defective and must be replaced - which is also consistent with the startup error.

  Your laptop is considered to be coming with a 640 GB hard drive, but whereas there is little or no difference in the cost, you can just as easily install a 750 GB HARD drive if you want a little more space - the player on the following link is an example that would be perfect for your laptop.

  750 GB hard drive.

  The procedure to replace the hard drive begins on Page 50 of your & Maintenance Guide.

  Once this is done, simply use your recovery DVD to reinstall the operating system on the new drive - this is described in the document of HP here.

  If you do not have your recovery discs, you can order a replacement set using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Best regards

  DP - K