Xbox 360 - NAT open on a WRT160Nv3 HELP!

Similar Questions

• Xbox 360 NAT issues?

  My XBOX 360 Live connection was working fine a few days ago.  Now, I can't join parties or cats.  I was told that this is a NAT problem.  No one knows how to fix?  I have a WRT54G.

  Who is your Internet service provider... ?

  Try to reduce the MTU to 1365 and click on the 'Administration' tab and disable the UPnP option and click on save settings... Now, check the connection.

  If this does not resolve the problem then try to update firmware of the router.

• Black wired xbox 360 controller for windows flashes and freezes games

  I installed the xbox 360 accessories 1.2, I plugged my black Xbox 360 wired controller for windows on the computer. I let it install its drivers. The ring of light continues to blink all the time, no matter how many times I have uninstalled and reinstalled the program and drivers, it continues to Flash, I even looked for updates for the drivers. When I start a game it also works very well unless I have pull triggers or go at my card or try to pick a lock. (the game is skyrim) It freezes whenever I have try them and I unplug the controller and it thaws and if I plug it back in, it does the same thing again. I tested the controller on a real xbox 360 (works fine), but it doesn't seem to work on my pc. Any help please, but serious answers only.

  Hello

  You will get help on the Forums XBox so - much to use them there.

  Microsoft Hardware - games
  http://www.Microsoft.com/hardware/en-us/gaming

  XBox 360 wired controller - Support - see 'Need help?' on the right side of the page
  http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows/52A-00004#support

  Rob - SpiritX

• Issue of controller Xbox 360 (PC connection)

  Greetings all I am new to any connection my Xbox 360 controller to my pc and ive met some problems, Ive downloaded the necessary drivers and programs for my controller 360 to connect to my pc but when I connect my conroller Xbox 360 Usb charger supplied with the controller wireless controller wireless, it does not pick up there. When I hit the guide button it goes right on my xbox 360

  Great thanks for the help everyone. Looks cause im going to have to go buy a wired remote, I have a problem with my wireless controller where it does not load (when I conect the charger in the light control will be red for about 30 seconds then green shift, saying that it is charged when it is not.)

• I can't configure windows media center in my xbox 360 s. My pc is not as visible in the console while my desktop is visible.

  original title: don't Set Up Extender

  PC: HP Pavilion dv7

  OS: Windows 7 Home Premium

  Console: Xbox 360 s

  Router: Linksys WRT160Nv3

  I can't configure windows media center in my xbox 360 s. My pc is not as visible in the console while my desktop is visible. I tried all the suggestions available in the internet on the topic. Still, I can not connect my PC and Xbox 360. Windows Security Essentials and spy doctor PC Tools are installed in my PC.

  Found the problem, at least for me anyway.  I had to disable my internet connection shared on my Windows 7 computer.  Once I disabled internet sharing it worked like a charm.

• How you connect an Xbox 360 console to an open Mesh Coova wifi hotspot?

  How you connect an Xbox 360 console to an open Mesh Coova wifi hotspot? You need to access a Web page to connect before any other Internet connection can occur? How do you do that on an Xbox 360?

  Hello

  I suggest you to contact the Coova Open Mesh support for more help with this problem.

  Here is the link: https://om.coova.net/forum/2

• Linksys E3000 NAT open Xbox Live settings

  Hi all

  I recently upgraded my the WRT160n V3 to the E3000 router. I had the port to the front of my old 160n to get my game Xbox Live NAT settings to OPEN.  When I switched on the router for the new E3000, my Xbox Live settings are returned to the Medium (medium). I assumed that this would have happened since this is a new installation/router.

  Can someone help me configure my E3000 and Xbox Live so I can have my open NAT settings?  I only need to configure the Xbox 1. Any help is greatly appreciated. Thank you!!!

  The previous is large enough and generally useless for the configuration of the E3000 to facilitate capacity NAT open xbox live connections. 1 make sure you have a static IP assignment for the xbox an assignment of dhcp for the mac address of the xbox in creating or statically assigning an ip address to the xbox outside the dhcp scope, you set but on the same network / subnet of course. then go to the tab under applications and games and the prior port 3074, single port forwarding, both internal and external, to the IP address of your xbox. Name the rule openNAT or something that you will recognize. put a cheeck in the box to enable the rule and click on save settings to activate. Your xbox should now work without complaint about the need for open NAT xbox live test and gameplay should work just fine.

• WRT160Nv2 Xbox Live Nat Strict and need to open NAT.

  So I have a WRT160Nv2 and I'm trying to get my nat to become unstrict for xbox live. I tried port forwarding which did not work. I tried this site http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread.id=122065 and who doesn't (I don't have an xbox 360 btw). Nothing has worked for me and whenever I mess with something that it screws to the top of the internet, so I put up the previous default values. I know how to access my router I just need to know what to enable, disable, or add to the router. Any help would be great. Thank you very much.

  Uncheck all options trigger Port and try the Port Range Forwarding...

  Port Range Forwarding-

  Application: xbox

  Start port: 53

  End port: 3074

  Protocol: the two

  IP address: 192.168.1.20.

  Check the enable box and save the settings.

  On the Security tab, leave the block anonymous requests disabled and change the MTU in 1452 under the Configuration tab.

  Click the status tab, and take note of DNS1 and DNS2 address...

  Goto the network settings on XBox and IP address settings and select manual IP settings and assign the following operations on your Xbox: P address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  Also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  Turn off your modem, router and Xbox... Wait a minute...

  Connect the power supply to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• Set up Media Center using Xbox 360 as Extender fails - HELP!

  I use Windows 7 64 b Assus laptop and the new version of the Xbox 360 as a media center extender on a network home wifi elapse a router Linksys E4200.  I have Norton Internet Security (v18.6.0.29) and the standard Windows Firewall on my laptop.  I have configure manually all ports right on the Norton firewall as described in the Article ID: 911728 - last review: February 16, 2010 - revision: 6.0 entitled "Firewall Ports that must be open to use your Xbox 360 as a Media Center Extender.  I get throughout the series until the last step.  Both the Xbox and the laptop appear to expire and I get an error message on the xBox that says:

  COMPLETED CONNECTION: "the Xbox 360 has been disconnected from the PC Media Center.  For technical support, visit Microsoft Support at http://support.microsoft.com".

  If I do nothing, the Xbox will attempt to restart the connection three times until I'm finally getting a message that says:

  "Xbox 360 could not connect to the Windows Media Center computer. Turn on your Xbox 360 console off and then on again and try to connect again"

  I did this several times without success. I also disabled my firewall from Norton and my Windows Firewall but still no further.  The Media Center on the laptop says it is installed and ready to use and I do not see my laptop under video library on the Xbox, but when I choose what it I get an error message that says:

  "Unable to connect. Make sure that you have activated this console on your computer.

  I copied the last entries in the log events below that shows the last attempt I made to configure the Extender. You will see a newspaper where the Extender and successfully it implements and then several error messages that I can't understand.

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:07:26
  Event ID: 506
  Task category: Configuration
  Level: Information
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Media Center Extender account Mcx1-LESLEYSLAPTO-PC was created for the extender with the ID: uuid:10000000-0000-0000-0200-0025AE8C0070.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      506
      0
      4
      4
      0
      0 x 8000000000000000
     
      69
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      Mcx1-LESLEYSLAPTO-PC
      UUID:10000000-0000-0000-0200-0025AE8C0070
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:09:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      70
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:28
  Event ID: 593
  Task category: Configuration
  Level: WARNING
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  Your Media Center Extender has been implemented successfully, but a firewall can block connect the Extender to your Windows Media Center PC (expired after 180000ms).
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      593
      0
      3
      4
      0
      0 x 8000000000000000
     
      71
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      180000
   
  

  Journal name: Media Center
  Source: Microsoft-Windows Media Center Extender
  Date: 02/07/2011 13:10:29
  Event ID: 116
  Task category: Application of the Session
  Level: error
  Keywords:
  User: LesleysLapto-PC\Lesley
  Computer: LesleysLapto-PC
  Description:
  The Media Center Extender session could start.

  Error: No mapping between account names and security IDS was done.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      116
      0
      2
      1
      0
      0 x 8000000000000000
     
      72
     
     
      Media Center
      LesleysLapto-PC
     
   
   
      -2147023564
   
  

  The last five entries are exactly the same as above.  During this attempt, I had turned on the Firewall Norton back after that defining carefully all the rules required by the above mentioned article.  The results are the same if I have the active firewall or disabled - just says error message the connection has expired when the firewall is disabled.

  I hope someone can help me with this - I have spent all day trying to solve this and I'm at the end of my rope.

  OK, so I spent all morning pour on my router configs without success and then realized that my drive mapping had stopped working when I updated to my current router E4200.  So I double checked all configs in Windows file sharing and realized that I had activated password sharing which prevented the player sharing between my laptop and my laptop children without creating the same user accounts on each box.  Who sets and I was able to get my shared drives. Then I pulled upward to Media Center again and got exactly the same answer as before.  I thought I was really puzzled but thought I would try and open shared files, I could see on my Xbox AND THIS TIME IT WORKED!  It must have been the password of sharing that prevented the connections between the Media Center on my laptop and Xbox and he disguised himself as a firewall or setting a timeout problem that led me down the wrong path.

  Thanks for the suggestion check the router settings.  I would not have thought to double check my disk sharing settings otherwise.

• E-mail/password reset for an xbox 360. Windows Live support is me misleading to their moderators, etc. I need some help here!

  I need a password reset on an old e-mail account linked to my xbox 360. (the enamel of related Xbox Live account). However after going around in circles with the xbox and Windows Live support person will help me. I have provided more than enough evidence that its me (old/new address, debit card info AND xbox console ID AND serial number for information). And I am NOT to START a NEW GAMERTAG due the fact that I have spent money under my current gamertag. Now they are misleading me to the moderators of Windows with this problem. So now what?

  E-mail bellsouth.net and its related help/support page has since been purchased, reformatted and dissolved for their new name like ATnT. Their support tech/operators won't help me as well since it is a problem of bellsouth and not an ATnT. But the email is bellsouth.

  I can't do any kind of password reset because I forgot my secret question answer. A mistake in good faith, but one that keeps this issue to be resolved. I have provided a list of answers to him but still no help and I keep getting turned down and rejected.

  Windows answers forums are for technical problems and we do not have any control over the resets password for all Windows, XBOX and Windows LIve accounts.

  You will need to contact Windows Live Support as Kim said.

  http://windowslivehelp.com/product.aspx?ProductID=15

  Thank you

• Help can xbox 360

  I have a toshiba laptop and you want to play an xbox 360 to this topic How do ihook up of any help would be great, I have the mini vga and S-series cable and 4 usb ports which is the best way please help

  Hello Kam13,
   
   
  Thank you for choosing Microsoft answers forums for Windows Vista.
   
   
  Here's what you can try:
   
   
  1. first of all, on your pc/laptop, go to internet connections, right click on your wireless connection.
  Click on properties.

  2. on the Advanced tab, on the top enable internet sharing and allow users to change the settings.
  that close.
   
   
  3. connect your 360 to your network card on your computer and turn on the 360. It might or might not immediately allow the connection, otherwise do manually.
   
   
  4. now find your connection to the local network under internet connections. Double click on it. You should 192.168.0.1 received an IP address. 255.255.255.0 for subnet addresses. default gateway must be empty. If the above information is not the same then manually change by accessing the properties > tcp/ip > enter the IP address manually.
   
   
  5. do not enter dns. Leave the field blank.

  6. now on your interface Xbox 360 console, go to system > network settings > change settings.

  7. you see the basic settings. that you can see your ip below settings. You may already have an ip address, if so press b to return to a page and to test Xbox Live connection. Select. He could hang on for a little while on mtu and icmp, just let it do its thing. If your connection is good, you should be able to connect to xbox live, you're ready to go. If this isn't the case, you may have problems with firewall/router. If you don't think it's the router or firewall, follow the next set of instructions.

  8. If the first set of instructions does not work, you can try this.

  9. return to network dashboard, edit, IP address settings. Enter a manual IP of 192.168.0.240, a subnet of 255.255.255.0 and gateway 192.168.0.1.

  10 Goto dns servers below, go to the manual and enter 192.168.0.1, it should say that anyway but type in anyway and the secondary area 000.000.000.000. If it gives you an error, change automatically. This works, even if it sounds ridiculous.

  11. you should automatically be good to go. If not disable both wireless and LAN on your pc network connections, and then in this order to reactivate, wireless local area network.
   
   
  You can also check out the link below:
   
   
  http://www.Xbox.com/en-us/pcsetup/MCEVista.htm
   
   
   
  DISCLAIMER OF THIRD PARTY SOFTWARE:
   
   
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
   
   
   
  I hope this helps.

  Thank you.

• need help with my xbox 360 pricing

  I can't see my acievements or change my avatar how to fix my xbox 360?

  Hi elite4411,

  I recommend you to ask your question to the Xbox support for assistance.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem to fill my computer to my xbox 360 please help.

  Recently, I tried to fill my xbox 360 to my computer. My computer runs off wifi. There is an Ethernet cable from my computer to my xbox 360. I click on my wifi then do a right-click on the bridge connection and the press of my xbox. When I then the following message appears "To create a network bridge, you must select at least two LAN or high speed Internet that are not being used by Internet connection sharing." I watched videos on Youtube showing how bridging the connections. I then clicked properties and went under my wifi connection sharing, I activated then 'allow other users of the network to connect through this computer's internet connection. Then I tried bridging the connections again and the same message appeared. Can someone tell me how to solve this problem?

  Hello

  Thanks for posting your question in the Microsoft Community.

  I suggest you to contact Xbox support to obtain assistance from the link below:

  Contact XBox Support:

  http://support.Xbox.com/en-us/contact-us

  I hope that the information above helps you.

• I need help setting up my new Xbox 360 on my wireless connection.

  can anyone help w / my xbox wireless connection

  original title: new edition of xbox 360 Wireless

  Hi SeanLynch,

  You can consult the following articles and check.

  Wireless Xbox LIVE

  http://support.Xbox.com/en-us/Xbox-Live/connecting/wireless

   

  How to configure settings on your Xbox 360 Wireless

  http://support.Microsoft.com/kb/908877

   

  How to connect an Xbox 360 Wireless network adapter

  http://support.Microsoft.com/kb/907330

  Let us know if it helps.

• I played with my xbox 360 on my LCD 32 inch tv for Christmas about 3 days ago, I went to turn it on everything, and it is has a blue screen I tried the same thing I think but no luck can help you pls.

  the xbox360 is going through the port at the back of the tv ypbpr and I tried to change from tv to hdtv on the back of the head of the xbox, but still won't help.

  Hello

  As you said that you have connected the Xbox 360 on your TV, I suggest you to ask your question in the Xbox forums, because they will be in a better position to help you.

  http://www.Xbox.com/en-us/community/

  For your information, I provide you this link.

  The screen of your TV or monitor is empty when you are connected to your Xbox 360 console

  http://support.Xbox.com/support/en/us/NXE/KB.aspx?ID=916158&lcid=1033&category=hardware

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.