XBOX ca't communicate with pc

Similar Questions

• How do you communicate with the Apple Watch

  How do you communicate with the Apple Watch

  Hello!

  Welcome to the Apple community. I'm not quite sure what you mean when you say "communicate" with the Apple Watch, so I'll give you a few options that can respond to your request.

  (1) the Apple Watch supports Siri, just like the iPhone and the Mac. To apply, simply say "Hey Siri" while the wrist is triggered, and your watch will respond. Alternatively, you can hold the digital Crown and Siri will be activated. As soon as Siri is activated, you can ask him questions such as "what is the weather today" or "reminder", or "Let's start a workout."

  (2) you can manually send SMS via your Apple Watch by use of Siri, or opening the messaging app. That Siri send your messages, just say 'Hey Siri, send a text < name >' and Siri will open the Messages app and wait to talk to you about your message. If you want to move the Messages app manually, press the digital Crown and will take you to the home screen. In the home screen, select the Messages app (a green icon with a word inside bubble). Any existing message log must appear, and you can type on a given message log and choose to respond.

  (3) If you want to place a phone call using your Apple Watch, you can say "Hey Siri, call < contact name >". If you have several numbers for a particular contact, Siri will ask you what number you want to call. You can also you can present a more specific request like 'Hey Siri, call < contact name >, < number >' with the number favorite is 'work' or 'House' or 'mobile' etc. So the demand go something like "Hey Siri, call Barbra, House".

  If you are still at a loss, with regard to the types of orders that Siri will accept, you can always ask. Say 'Hey Siri, what can you do?' and she will give you a list of commands that she will answer to the.

  If all goes well, I addressed your question. If not, please provide a little more information and I'll do what I can to help you.

  Good luck!

• SERIOUS HELP NEEDED: How to prevent an application to communicate with the internet?

  Hey guys, I use an application called VLCStreamer on my iPad and I just want to know how I can help but communicate with the internet. For example, I don't want VLCStreamer to be contacting the author of the application.

  Thanks for any help!

  Put your iPad in airplane mode.

• Presentation of Adobe acrobat 9 pro can not communicate with hp officejet 8600 premium pro scanner via WAI

  Scanner works with the HP software and test successfully with HP Diagnostic Utility 4.2.  However, when I try to create a PDF document from the scanner by using Adobe Acrobat 9 Pro I get an error message indicating that Adobe cannot communicate with the scanner HP 8600 WAI or Twain.

  I've worked fine before with my HP 6380 hooked up via USB

  Hi jusandi,

  Because the printer is able to scan from HP and Microsoft paint software then the problem you are having is with the Adobe Acrobat 9 software. My first suggestion would be to uninstall the program and then reinstall it to see if the problem persists. If you still have the same problem, you need to contact Adobe technical support.

• Tecra P11 cannot communicate with scanner

  6 months ago, I replaced my old Tecra A3 with a P11. For almost all of this time, it was a lottery if the P11 would communicate with the scanner function (fine print) of my Canon MP170 printer/scanner. The only reliable method that I had was back system restore at the date of purchase--> do the scanning-> undo system restore. What a pain!

  This printer was showing it's age so I bought a new Epson. Same problem, the computer can talk with her to print but cannot communicate to scan. I changed the USB cables and ports, made what Epson has suggested, but to no avail. Tips last Epson a me summer "it must be a computer problem.

  Anyone else had a similar experience? More important still, you haven't solved the problem? I have no desire to return to the merrygoround of system restore.

  Hello

  It is really strange, and the whole is illogical for me.
  How it can work with the settings but not later? What happens during this time?

  Last month I bought the large HP device with printing, scanning and the adjustment function. I use it with my Tecra A11. The entire configuration was completed in 10 minutes. I ve tested with USB cable and also with wireless LAN functionality. No problem at all.

  In my opinion the most important is the pre-installed software that you get from the manufacturer.
  If Epson believe it must be computer you asked what that would be. I mean they should have sufficient experience with own products and they have tested the software they offer.

  Unfortunately I can't help you with this, but I will follow this thread to see what the problem was.

  If you will be able to find a solution please let us know.
  Good luck.

• My Mac communicate with printer

  I have an Hp B210a photosmart, and I have a version of Mac OSX version 10.9.3.   For some reason when I try to print wireless it says that it cannot communicate with the printer.  I downloaded the drivers, and it did not help the issue.

  Hi 2jdaddio,

  Welcome to the HP Forums! I understand that you can not print wirelessly with your HP Photosmart B210a with your Mac 10.9.3. I'm happy to help with this problem! Please have a look through this guide. The printer keeps Wi-Fi connection.

  Hope this helps and have a great day!

• Why Apple makes it so difficult to communicate with them?

  I would like to provide feedback to the design. The application from the App Store for iPhone has a problem with his section of the review/comment. (Does this software I use now, but a fight at a time) and I want to tell them about it.

  Now, I also want to tell them it's outrageously hard to communicate with them on this subject. Why is there not a button 'comment '... IN THE WORLD? It's like you guys don't want to hear from us. If I get online and try to complete one of your forms of decision-making in charge of customer, I provide an order number, I did not because I am FREE of FEEDBACK DESIGN, do not ask questions about an order. And the phones are always busy all the way in the foreseeable future.

  DIFFICULTY. IT. SHIT.

  Apple customer support has really hit the bottom.

  http://www.Apple.com/feedback/

  Choose the product or the App.

  

  19:48 Saturday. 20 February 2016

   iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• If I created my iPad to the text can I communicate with someone who is not an apple product?  If yes where can I start the process?

  If I created my iPad to the text can I communicate with someone who is not an Apple product?  If so, where should I start this process. She is studying how to set up his tablet to the text for me. Is this possible?  Explicit detail please... I am new to this. Thank you.

  To be able to not text on an iPad Apple devices, you need an associated iPhone to the Apple ID, the iPad is using.

  Read the following support document SMS since it deals with sending SMS through continuity.

  Continuity allows you to connect your iPhone, iPad, iPod touch and Mac - Apple Support

  With continuity, all SMS and MMS text messages that you send and receive on your iPhone may also appear on your Mac, iPad, and iPod touch. You can also meet your contacts from any device is closer to you, including your iPad or Mac.

• Questions, communicate with a Windows domain controller

  I thought at first my user had a problem with Keychain and had finally called Apple Tech Support.  While on the line with Apple, we proved that it was not a question of Keychain, but rather a problem of communication with a windows domain controller. The key elements are:

  * Multiple users and Macs are members of an Active Directory multi-domain forest

  * iMac is a 27-inch, mid-2011w / 8 GB RAM

  * OS X 10.11.2 (updated 10.11.3)

  * Question appears isolated to this iMac (currently). All other iMac, Macbook Pro and Mac Pro is currently very well, several VIRTUAL LANs, and a MacBook connected to the connection of network iMacs can communicate properly with the domain.

  * iMac seems not to contact no matter what domain controller when connecting, but connects to the resources of the network and domain controllers, after login. Permissions and access to the resources appear normal after login.

  * User (s) cannot change passwords for mobile accounts or login with new mobile accounts, but accounts/passwords cached work very well.

  * iMac uses Symantec EndPoint Protection for Mac (anti-virus) – REQUIRED BY THE POLICY.  I can't change.  I have come off for the test, but must replace as soon as the test is completed. This policy is set at a level about five grades of remuneration above me.

  * It isn't really everything off the coast of the wall software installs on the computer.  The full Adobe Creative Cloud subscription is responsible, but so it is on just about every other mac I support.

  The steps that have taken place:

  (1) about a month ago, the user went to change his password, but wouldn't go to change password at the login window.  We were able to change their password on the network and could use the new password to connect to the network Active Directory controlled resources. We can connect to resources network successfully with the new password, after we connect locally with the old password.

  (2) we get the red ball (the network resources are not available) to the login window. We are basically connecting with identification and passwords cached information.

  (3) if we try to change their password through the system preferences / users and groups / / password Chang, we get the message that no domain controller is available.

  (4) initially thought that it was a matter of trousseau, and we ended up calling Apple support, since Keychain first aid is no longer available in 10.11. Apple-Advisor while that remote, showed where it was not a question of Keychain because we could not change the password on the domain, because the iMac didn't communicate with a domain controller.

  (5) while on the phone with Apple, we reset SMC and NVRAM without success.

  (6) If you are going to untie the iMac in the domain, a message that the system cannot communicate with a domain controller.

  (7) today, thinking that maybe there was a hardware problem with the ethernet connection, tried to use the private WiFi network. Still would not communicate with a controller domain, but, as if using the wired, could connect to network resources. This happens independently attempted account.

  (8) used a MacBook on its network without any problem, it is not the connection port or switch

  (9) moved his iMac to another connection on one VLAN different. Same question.

  I'm open to suggestions. I have two days to work on this subject, around the planning of production of the user, while I'm off site for a week.

  10) thinking that maybe it was something that happened with 10.11.2, he improved to 10.11.3 today. No change.

  I don't want to try to clean and recharge its iMac, in the hope that this clears up the issue.

  ANY SUGGESTIONS?

  A few additional tests.

  (1) Symantec deleted using Symantec CleanWipe, without modification. Has been reinstalled after additional tests and a reinstallation of the operating system.

  (2) being ran reports, visualization and research now, but nothing is really coming out as noticeable. Only problem seems to be a helper of Adobe

  (3) use a bootable USB key and had no problem with the thumb drive version, this isn't somehow a hardware problem.

  4) entered the recovery partition and the re-installed El Capitan, in the hope that perhaps, is a pilot or something in the protocol stacks have been corrupt, a reinstall would correct. Reinstall has not corrected the problem.

  I'm really strongly leaning towards here is something in a plist or somewhere configuration file that is corrupted, but I don't know where this would be right now.  Will continue research and testing. Last resort will be a wipe up to bare metal and a clean install. I will not migrate the profile of the user, but only its working files.

• Unable to communicate with the printer HP 4630

  Continue error message of "Unable to communicate with the printer." Even when connected by USB.

  Have reinstalled the software several times, checked the wireless (no problem), printed many pages of configuration directly from the printer.

  I keep trying to add the printer to my preferences. One thing is that it will only add like a scanner or fax, a PRINTER. It is also called Hello Scanner. Why can't I add as a printer?

  Now, it will not also let me COMPLETE reinstallation of the software, it freezes at the section add printer and I can't move forward. So frustrating...

  Help!

  Hi @PKahn

  It seems that the computer does not recognize the print driver.

  We will reset the printing system, repair disk permissions, add the printer using the driver and try to start a new search.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• I have a second hand iPhone and can't set up as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE you have to communicate with the person he was and connect with Apple here

  I have a second hand iPhone and cannot configure as the person he was find my iPhone on the phone and wont let me sign in with my Apple or the password and IE to communicate with the person he was and connect you with there Apple ID and then cut to find my iphone. Unfortunately o cannot get in contact with that I had to and now can't activate my phone can anyone help? Is there another way I can get into my new phone

  There is no possible way to turn it off without having to contact the original owner. Nothing whatsoever.

  This is why you should always check if find my iPhone is not activated on a used phone.

• HP Officejet Pro 6830: Unable to communicate with the Scanner

  Printing is fine and just impossible to scan.

  I tried to solve the problem of scanner/copy of the measures:

  1. run a 'HP Print and Scan Doctor' to check

  2. click on 'Scan of difficulty' to identify the error

  3A through the steps with all green ticks, with the exception of the driver with a «!»

  4. with the result, I went and download the latest driver to update the scanner and also did a update system for you ensure that the printer is so far

  5. after the update I still get this message from the scanner "Unable to communicate with the Scanner" and when I press the button of scan/copy the printer only a "ding" sound occurs but nothing is scanning / copy

  Note: I brought the printer 2 months ago and this is the first time that's happened

  Hi @Flash1688,

  Welcome to the HP Forums!

  I see that you are unable to communicate with the Scanner with your HP Officejet Pro 6830 on Windows 8.1. I'm happy to help you!

  If you just try to make a copy with the printer, it works? You see on the screen of the printer error messages? Copy of Documents. Also, if you lift the lid of the scanner during the copy process, you see a light come ON and the scanner bar moving?

  In the meantime, please, try the procedure described in this guide, a message 'no computer found' for HP Officejet 6810 and HP Officejet Pro 6830 e-all-in-one printerand let me know what happens!

  I hope hear from you soon!

  "Please click the Thumbs up icon below to thank me for having responded."

• CAN communicate with Veristand

  Hello

  I use a CRIO9081 with a module CAN 9268. I made a good configuration with detection of MAX module, power module, adding CAN wear under a Veristand project and I have NI-XNET...

  Now I want to interact with a sensor using CDN per Veristand, but I am a novice with CAN communication: you know some "user manual" on how to use CAN by Veristand to interact with another material?

  Thank you

  Hi vincentlg,

  In order to communicate with an external sensor via CAN, it is likely that you will need to set up a database BOX. You can create this with the OR-XNET database editor that is included with the XNET driver. The data BOX is responsible for converting frames in 'real' values (see: http://www.ni.com/white-paper/2732/en/#toc6). This also means that you can add a frame/signal to VeriStand. In doing so, signal will appear as a channel in the environment in which you can get (or set) the value of the channel in the VeriStand workspace.

  You can see that the manufacturer of the external sensor will provide a database or the scale that is required to convert the images into meaningful data. It is very unlikely that this will correspond to the sample database.

  Journal of tiara Bus converter allows to take the raw image data and convert it acquisition AFTER meaningful data. You will always need a data BOX to do this.

  To sum up: you can acquire data from a database, but you will have the raw images, which may not mean something to you. If you create a database, you will be translated these frameworks of the relevant data.

  I hope this helps, but I would like to know if I can clarify anything.

• Unable to communicate with the printer hp deskjet 1000

  I have used this printer for almost 2 years and problem say never FAILED before... forst my text printing is distorted then he showed in offline mode and later its says printer is ready, but when I give the command of printing... it said 'cannot communicate with the printer.

  Pls help!

  My problem was solved by removing and reinstalling the drivers... .any way thanks for your help

  Spoiler (Highlight to read)

  Spoiler (Highlight to read)

  

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.