Problems with system restore recovery disc

Similar Questions

• Problem with system restore post on Vista update

  My Vista PC loses the internet connection so I tried to restore to the last known point of function after uninstalling Norton 360. This has created an error in rstrui.exe (system restore Microsoft Windows has stopped working) Please help! I think this happened to post recent MS update a couple of days.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O what is the exact error message you get?

  O that you reinstall the Norton software before you try to restore your computer?

  In the meantime, you can try to restore your computer to a previous state of safe mode.

  Try to restore your computer to the previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. ensure that the safe mode option is selected.

  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Problem with the Vista recovery disc

  I downloaded the neosmart Vista recovery disk.  I also downloaded the iso burner to create a bootable disk.  The first time, I used a DVD to make the bootable disc.  I then went to defective laptop (my dads - will not go beyond the page that is displayed when you stop suddenly).  I went into Setup to make searching the disk first to start.  I inserted the disc and everything works well, but only for the first, a short walk.  It tell me that windows loads the files and I see the bar moving across the screen.  Then I get the screen you see green bars that cross as if its about to start.  Next, I get a screen with a great slider and a small box saying error of Setup.exe.  If I do nothing, nothing happens, if I click OK it starts the whole process.  I decided to try everything from scratch and delete my copy of vista from torrent and re downloaded recovery disk.  I then burned on a CD using the standard iso-burner and exactly same problem again.

  I'm going wrong somewhere or is the computer of my father beyond saving?

  I got Dell fixed in my mind, for some reason any!

  Here is the link to the Forums in XP.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Problem with system recovery dvd

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  I ordered the dvd from hp for my compaq presario notebook and when I got in I put disc 2, it won't return to the vista system recovery. and now my laptop does not start.

  Hey mjthomas1981

  you encounter a problem with the hp recovery discs, you should contact hp on their products

  Walter, the time zone traveller

• Pavilion 20-b313w: HP Pavilion 20-b313w reset and reinstall with the full recovery disc

  I tried to remove malware from my system so long, so I decided to do a complete reset. Before I have it I order the recovery for my computer disk to reinstall but unfortunately reinstall option disc never came. The recovery partition has been used to reinstall so my computer. I think my computer is still infected because it is in the partition. And because after the reset there are 3 programs in the control panel to uninstall the list of programs that have been updated without an internet connection because I unplugged my computer to the modem during the reset process everything and I am 100% sure that I have not reconnect before seeing these programs. Also, list of updates installed on the Control Panel showed that the 3 programs had updates installed. As these data are still on my system please tell me it is possible for me to do a true thorough reset that removes hard disk and recovery partition then and I can reinstall everything with the HP recovery discs. And please also give advice on the update after. Should I do Windows updates first or updates of HP first. And when it comes to updating the BIOS there are 3 available updates. Can I download and install all 3 starting from the oldest to newest or just the new version? Then when my Windows 8 is fully updated with the HP and Windows tips on how to reinstall Windows 8.1 (free update of Windows Store, no disc) and update? I know I'm asking a lot, but I want to just make sure I do this right so I can enjoy my computer again and if there is a problem, I'll have some kind of reference to look to see where I was wrong. Thanks to all who read this and I am particularly grateful to those who take the time to share their knowledge with me in response.

  Thank you for the additional information.

  Your best option is to use the recovery media that you should have made when you purchased the computer.  If you do not do this, the only other option you have is to buy the media at HP.  The recovery media will restore your computer to its original configuration and reinstall the recovery partition.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Satellite A100 - 147 Compression file error with the product recovery disc

  I have Toshiba A100-147, just out of warranty. I tried to recover with a disk, disk unpack to 69% and then I get the message "ERROR READING OF COMPRESSION FILE (1). I have no choice but to click OK in the error message box, and then quit the recovery as she stops running.

  Any help would be extremely welcome.

  Hello

  It looks like a problem with the Toshiba Recovery CD.
  Have you tried to repeat this procedure?

  What of the HARD drive? You format the HARD drive using an original CD of XP MS?
  It s very interesting if a format of HARD drive could allows to perform the installation of the OS since the Toshiba Recovery CD.

  I remember that something like this has happened on my laptop s friend was not able to recover the operating system using the Toshiba CD. Finally, we found that some sectors on the HARD disk has been corrupted. Format drive HARD allowed integer and my friend was able to install the image of Toshiba.
  It's worth a try ;)

  But of course, this error could occur because of the faulty recovery CD.

• XP pro have two problems: the system restore will not work and rdpclip seems to work computer

  I had a virus, trogan, stopzilla online to fix the problem after allowing access to my computer, (it's a virus) tried to uninstall this program, finally just disabled and removed from the start menu.

  Now, in the pc Registry mechanic tool the first thing listed is rdpclip as run from my computer.
  Since that time I have been unable to use system restore from windows system.   only restore I access is
  from backups of registry mechanic even if I went and set on system restore after that I checked the settings and discovered that they had been handed over to OFF.
  I used the restore before so I know it worked before the access help online.

  Is the solution just to disable repclip?   I have access to my computer so that I have to allow access by external connection...
  computer programs run more slowly, there is always time to wait before the update when I try to use wp-admin to make changes on my Web site.

  Former title changed, but explains the problem
  XP pro, has had a problem with virus removal program, it turned off because it wouldn't uninstall.  Now when I run Registry mechanic it shows my system being run by rdclip.  I can't use the windows system restore.  Points on the calendar are lit up but do not work.  Can I use mechanic registry to disable the rdclip? in auto start menu?  If so this might restore ability to use the system restore?

  Hello

   
  1. you receive an error message when running the system restore?
  2. which antivirus app do you use?
  3. what happened when you try to uninstall the program?

  4, are service packs installed on your computer?

   

  To uninstall the application:

  Method 1:

  Run the hotfix, restart the computer and try to uninstall

  Problems with programs that cannot be installed or uninstalled.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

   

  Method 2:

  I suggest to keep the computer in a clean boot state and check the status of the issue.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: While perform analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data may be lost
   
  To solve the problem of system restore:
  I would sugggest you to go through the link following.
  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP.

  http://support.Microsoft.com/kb/302796

   

• I will have problems with System Mechanic if I move from Vista to Windows 7

  I have Iolo System Mechanic Version 11.0.5 running on my computer.  Currently, I am running Vista but want to upgrade to Windows 7.  After the upgrade, I problems with System Mechanic?

  Doesn't matter, what the State, these utilities may see the sys or programs unusable when they make changes, uninstall it

• cannot restore the system with the Vista recovery disc, computer stuck in step 3 of 3 loop

  Hi all

  My computer has been blocked in the formidable step 3 of 3 loop. I followed the advice of Mr. Murphy and created the Vista recovery disk. I loaded it and followed the instructions. Everything was fine. I chose a 5 days ago restore point, and it went well until he must "finalize the restoration of files...". ». That's where he stayed - it would not be completed. I tried the restore points different, all with the same result. Any help would be greatly appreciated.

  Try to make with her startup repair.

  With this CD, you can also do a startup repair of your Vista OS with it.

  If she can't do a startup repair and system restore has failed, it is time to consider doing a re-install of the Vista operating system.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

  0rignal title: Vista SP1 didn't update problem

  So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

  "System restore was not entirely successful.  File system and the setting of your computer have not changed. "

  then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

  If you need more information please let me know and evil provides everything I can

  Hello
   
  Follow the steps and check if the problem persists.
   
  Step 1:
   
  I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
   
  Note: Restart your machine as usual by following step 7.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with the Dell recovery and backup system

  Hello

  I have problem with dell backup and restore in my dell laptop (inspiron15). When I select the backup factory option > choose a drive then continues, he said 'Please sustained insert blank to keep media. "
  However, blank disc is already inserted and formatted with the live file system. Please help if anyone has the solution.

  Thank you

  Hello

  Thanks for your reply.

  Usually, the blank DVDs would be already formatted and ready to use as they are writing discs once. Please try to create the backup disk without formatting the DVD.

• Problems with the restore points very limited available in the system restore

  I found that I can't go further than 3 days on the system restore points. I have noticed for some time and it causing problems. I can't go back to the previous month. Can someone tell me why?

  YES-open SR-glance left to SR parameters - click sur-put slider for max.

  min he won't give you a few days.

• My Satellite phone stops during the restore recovery disc image

  On several occasions the laptop suddenly stops until he's finished completely restore the recovery disc.
  I have a suspicion that this may be due to get warm. If so, is there anything that might be too sensitive to heat and therefore tripping? It becomes a little hot but not more than my other laptop which is not traveling. It seems to work longer before stumbling in a cold room.

  I have not been able to fully restore the image without problem and had to do the installation with a XP disc. This succeeded, but again, it fires after a short use.
  Something should be reset or the laptop should it take repair?

  Hello

  According to the description of your problem, the first step should be professionally cleaned. Dust blocks the flow of air and I imagine that shortly after, the critical temperature of portable erached. In this case the unit will stop automatically because of protection of the equipment.

  The device, I'm sure everything will be OK again.

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• Problem with the Toshiba recovery process

  Hi guys,.

  I had some problems with my laptop and decided to return to the factory settings. But during the process, because of a few mistakes that I didn't understand, formatting process was broken and I guess that the recovery in my hard drive section was damaged. So, I could not use boot from the hard drive. Becacuse Toshiba did not give me recovery disk when I bought it, I had to boot the pc with cracked windows. I never use illegal software, but I had to do this temporarily. In any case now Toshiba has sold me an extra price, thank you Toshiba!

  Today, I had the cargo, and Toshiba Turkey sent two recovery disks. In the first disc, there are preinst.swm files under the ZZIMAGES folder. And in the second disc, there are some files named as bin, efi, planfolder, boot, sources etc.

  What should I know? Hot to go back to my original windows? And how can I do a recovery of these two DVD recovery usb drive?

  Thank you, best regards better.

  Any help pls?