Behavior strange question slides as well as a countdown timer!

Similar Questions

• question slides will not be published in project...?

  Hello

  I have a situation where the slides in question in my project are not published... and aas a result, there is no questions to answer...:-/

  Anyone know why this could be...? using CP7

  See you soon
  Sabine

  problem solved... has help and slides glossay upward before the questions, now the question slides very well publish...

  See you soon

  Sabine

• Strange looking for true false question slide

  Hello

  for some reason I now some strange looking for true/false question slides, depending on the image below

  

  I try to remove all the question slides, and starts again, buit when I insert now any fake slide, he aoppears as above.

  If anyone else has had this problem and if so, how can I solve this...?

  Kind regards

  Sabine

  Go in Edition > Preferences > by default. Here, deselect the Autosize captions.

  Anthony

• Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  Captivate 5.5 prohibited for different types of a quiz question slides to work properly?

  I have a quiz that includes multiple choice questions, multiple choice with several answers, sequencing, and short answer questions. I was told in an online conversation that I had to use a default template to Captivate with a type of question only for captivate slide works correctly. The Adobe representative remotely considering my record, and discovered that the quiz button is not connected to any action, even if I created it a slide of questionnaire.

  

  Online chat:

  Thank you for choosing Adobe. A representative will be with you shortly. Your estimated wait time is 4 minute (s), and 0 second (s) or more because there is 1 client (s) online in front of you.

  You are now chatting with 'Lea '.

  Leah: Hello. Welcome to Adobe Technical Support.

  Leah: I received your request. I would like to please a moment to check your account and review the details of your

  request.

  Leah: Please choose the option, the infinite attempts

  David Lee: Yes, I had endless attempts checked. It still does not work.

  Léa : Each question must have infinite attempts

  David Lee: Yes, I welcomed the infinite attempts in quiz preferences, as well as with respect to each question. This particular slide is a question multiple choice with multiple correct answers. The infinite button is checked. The slide informs the user to try again, but the back and the clear button do not work, the termination of the project and the user did not click the new button.

  Léa : I may have remote desktop connection help you?.

  David Lee: Yes, thank you. How do I facilitate this?

  Léa : http://my.adobeconnect.com/khyati/

  Léa : Enter as a guest

  David Lee: I'm in

  Léa : Share my screen

  Léa : Desktop

  Léa : Please show me what slide we discuss on

  David Lee: We discuss slide 18

  David Lee: The current slide

  Lea: I would like to see the result

  Léa : Tiffany is a Captivate model?

  David Lee: No, I did this. The other tab you see is called ClarkTemplate, but this isn't a model of captivate. I called model as is the format for the entire project.

  Léa : Unfortunately there is no action not implemented responses to check and also that is not a default captivate quiz, I can't support this.

  David Lee: Why is there no action on response to tick? It's a quiz slide

  Leah: The model of clark is not a default template of Captivate.

  David Lee: I'm supposed to use a default template of captivate?

  Leah: Yes if you want to

  David Lee: And it would work then?

  Léa : He could.

  David Lee: How to create a default template of captivate?

  Léa : They want a multiple response quiz?

  Léa : If so, please create a quiz, and you can create the quiz with the help of the help file.

  David Lee: Yes, but it should also include short answers and sequencing. Am I limited to a type of question in a quiz for captivate 5.5 working properly?

  Léa : Yes

  David Lee: Thank you for your time.

  Léa : Welcome

  Léa : I closed the meeting

  Léa : Please contact Adobe. Good bye.

  Friendly format for this question slide!  Very cool.

  One thing I want to suggest you check if you meet problems with question slides, but you have not accidentally deleted default captions that are on the slide when Captivate adds to your quiz.  For example if you have deleted or replaced the title of the question (the one that tells you that it is a true/false or multiple choice) or legends question text (the one that allows you to enter the question to which the user is supposed to reply), then you can expect to have strange problems arise.

  Usually, I suggest to users that they're trying to click the little eye icon on the timeline for the quiz question so that it hides all the objects on the slide.  This icon SHOULD NOT overshadow the default Captivate captions or buttons.  He must hide captions or the items that you added to the slide when it was inserted.  If you click on this icon and you see the title of the issue or question text captions disappear, then you are snookered and need to rebuild this quiz with a new question.  You can not re - insert these specialized legends once you've deleted.  They come with question slides.  Most users of Captivate are blissfully unaware that these legends of importance both for the proper functioning of the quiz.

  One last thing: some of your symptoms suggest that you have the Quiz settings > required options set too tight.  Make sure that the drop is set to optional for the highest degree of flexibility.

• Strange question, craps remaining after the system recovery on my windows xp desktop.

  Strange question, thank you for your comments!

  I just reinstalled windows xp on my old HP desktop HP Pavilion Media Center TV m7334n PC computer using the recovery on D partition. I expect that the installation would be a clean install. At the beginning of the recovery, I noticed the message on the screen saying that the backup was in process. After recovery, I could start my computer and realized that used disk space C was still as the space of C drive used before the restoration. I also noticed that there was a lot of pre-installed programs appears on the list of start - all programs. I never installed them after recovery. Many of them work. I expect a CLEAN installation. It is not clean at all.

  Furthur inspection on the system to reveal problems:

  1. I noticed that there are so many records under the program folder program files on the C drive (I have only one program fichiersDossier). I guess that the recovery process copied evething under my original forder of program files in this folder. I don't have anything I can use most of them because the links were scattered on a large number of them (I can't run the program of either start - all programs or folder directly). Is not at all a CLEAN installation.

  2. the recovery process also copy my document in the folder as well original user, see below to understand which is the original file of the user.

  3. originally, in my computer, I have two users (or 3 including comments), we came to HP-administrator with the computer, is another family.  On the computer I just recover, there are 3 users accompanying the recovery. They are administrator, hp-administrator and guest. I've renamed the family administrator. Now, under systems and settings, I see the user plus two records. They are administrator-YOUR-4DACD0EA75 and hp-administrator-YOUR-4DACD0EA75. YOUR 4DACD0EA75 sounds familiar. I can remember that I was lazy and that it has not changed the computer name during installation after recovery. YOUR 4DACD0EA75 is actually the default name given to me during the installation. I don't like this at all, so I changed the name of the computer and restarted the computer. The name of the computer was changed after the restartup, but ugly folder names remain the same and I can not even rename the ugly file name.

  I had done some restorations system on this computer before, I never noticed a problem like this before.

  1 have we seen this before?

  2 I forgot something?

  3. can I safely delete the original user profiles and records under the program folder program files?

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant.

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks?

  Thanks for reading my long message!

  1 have we seen this before? I saw something similar and other relief to be fixed.

  2 I forgot something? I don't think so. Just do an another hard drive recovery. Try again is all I can think about.

  3. can I safely delete the original user profiles and records under the program folder program files? I would'nt mess with her. Just do another hard drive recovery system.

  4. can I do a system recovery really CLEAN? I understand that the crapware will be installed during the system recovery. I'm ok with that, what I want is my pc to be recovered to the original state of the plant. Yes. Used hydrogen peroxide call destructive (or full) non-destructive vs. Make a full - restoration destructive to put things o back the way you bought it.

  http://support.HP.com/us-en/document/bph07145

  5. I can read is no longer my 1st disc restore dvd. Is it possible to make another set of recovery disks? By all means, out juice of repair disk and try to get it back. If you can repair the disk, make a copy or 2 whole and store them in a safe place. Otherwise, you will have to order them from somewhere on the Web... as a popular auction site.

  Thanks for reading my long message! You are welcome. Thanks for posting. I hope my answer helps.

• Sanitation in a course with several slides contained and question slides

  My goal is to build a course that consists of 20 ~ content slides (each has a small video conference), followed by several questions each to compose a great quiz, each answer is counted toward the degree.

  So my current configuration is as follows:

  • Each slide of the Conference is followed by question slides 1-3.
  • An attempt is allowed by each question.
  • All questions must be answered correctly before a user can move to the next slide content.
  • Each conference is preceded by another slide of content and has a button 'Next' with 'Back to the Quiz' on measures of success.
  • Failure to answer a question correctly, the user is redirected to the previous slide in conference at the Review Conference. Then the user is redirected to the slide in question failed (via a button 'Next') and the next attempt to answer the question.

  I understand the scenario of reclamation and was able to set up the first slide of the Conference, followed by 3 question slides, and everything works as I want. Button 'Next' on the slide of the Conference works properly depending on where the user came to the Conference slide of.

  However, when the user finally arrives at the next Conference slide, as soon as they click on the 'Next' button on this slide, they are brought back to the last slide in question answered: in my case, it's the third question slide after the first slide of the Conference. The loop closes just here.

  Basically, there is no way for the user to pass the second slide Conference.

  Why the button 'Next' on the second slide Conference not to go to the first slide of the following question?

  What I am doing wrong?

  Thank you.

  Lyolya

  Captivate sanitation with failure - part 1 - blog of monkeylogic

  Captivate sanitation with failure part2 - monkeylogic blog

  Lilybiri, I think that the solution to my problems is very well explained in the posts above I found last night. With a few changes, I could get my course work just as I had originally planned.

  Here's what my structure/feature class now looks like in my test file:

  Title slide

  Video conference 1

  Questionnaire1 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 1 first incorrect answer; go to video conference 2 success OR the second incorrect answer.

  Video conference 2

  Questionnaire2 Questions (tested with 2 questions multiple choice, 3 possible answers to each)-back to the video conference 2 as soon as the first incorrect answer; go to video conference 3 success OR the second incorrect answer.

  Video conference 3

  .. and so on.

  The notation works, too!

  I'm actually very happy to have found a solution to what seemed to be an impossible feat. Thank you for your help, I appreciate the time you took to answer my questions. As a completely new Captivate user, I think that I learned a lot in the last week, thanks to your contribution, and that of many other generous people on the web.

  Thank you

  Lyolya

• Playback bar disappears from the slide content when browsing back to a question slide

  My captivate project has the PlayBar disabled on quiz questions, which works very well.  However, if I move to the back of a quiz in a content slide, the PlayBar is gone (even if it is the first time I saw the content).  I tried to adjust the cpcmndshowplaybar to 1 on this content slide to see if it would work, but no luck.

  I tried an empty project with a 1 x blade and question slides x 1 and I get the same bug, disappears from the play bar.
  

  Can anyone help?
  

  Hi all, I made a workaround for the problem as follows:

  1 to edit > Preferences > Quiz > settings: I unchecked «hide PlayBar in Quiz»

  2. in the project > Skin Editor: I unchecked «hide PlayBar in Quiz»

  3. on skiing all the content, I executed a playback show advanced action cpCmdShowPlaybar with 1 bar

  4. in the Question pool, on all the content slides I executed a PlayBar hide advanced action cpCmdShowPlaybar with 0

  That did the trick, it is not save time or probably not the right way to do it, but has solved the problem.

  Thank you

  Martin

• Next and submit buttons - question slides

  Hi all

  I see some problems using with the following buttons on question slides provided with Adobe Captivate 6.0, and send it.

  	Desired behavior	Actual behavior (out of the Box)
  Entering the slide	(Behavior at the entrance of the cylinder head is OK)

  • Next button is disabled (grayed out)
  • Introduce the button is enabled
  • "Back" button is disabled

  (The same as the desired behavior)

  • Next button is disabled (grayed out)
  • Introduce the button is enabled
  • "Back" button is disabled
  On the presentation of a correct answer
  • Next button is active
  • Introduce the button is disabled (grayed out)
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • Next button is disabled (greyed out) [ISSUE 1]
  • Submit button is activated (standard color) [issue 2]
  • "Back" button is enabled
  • The user must "click anywhere" to move forward (full page of hand cursorover). This means, if the user tries to click on return they will go to the Next is not the previous slide
  . [Issue 3]On revisiting a question slide (screening)
  • Next button is enabled
  • Introduce the button is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • Next button is enabled
  • Submit button is activated (standard color)-, but does nothing to click [issue 4]
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' if they wish to return to the previous slide.
  On revisiting a question (for review) slide
  • Next button is enabled
  • Button "submit" is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • 'Back' button on questions 1 to be disabled or invisible or take the user back in the contents page.
  • Next button is enabled
  • Introduce the button is disabled (grayed) or invisible
  • "Back" button is enabled
  • The user should click on 'Next' to continue, or click 'Back' to return to the previous slide.
  • The 'back button ' on Question 1 is activated and directs the user to the previous content that is confused page. [issue 5]

  Issues related to the:

  1. Are there settings that are the origin of this undesirable behaviour?
  2. Or, is it possible to bypass them? It seems a lot of work to have to rebuild the behavior of quiz!
     1. Problem 1: I could create a custom button 'Next', but I can't see any sort of hook in the submission process to trigger it to be enabled / disabled.
     2. Issues 2 and 4: I could create a custom of 'Submit' button but I don't see what measures to trigger to submit the quiz question.
     3. Problem 3: I do not see boxes click to remove or settings to change, to stop the behavior "click anywhere.
     4. Problem 5: I worked around this by creating my own back for Question 1 only button and hide when they review the quiz.

  Any suggestion would be great!

  Thank you

  Sarah.

  Hi Lilybiri

  Thanks for the links to your blog, as always very useful!

  I understand the hesitation when seeing convoluted questions on this forum, but I encourage you and others to try to remedy. Otherwise, the forum is pretty useless if it only meets the "simple" questions I tried to unzip the problem so that the expected and actual results were clear.

  I have now overcome problems 1, 2, 3 and 4 as follows:

  • Make the button submit transparent and placed a SmartShape resembling to the button send behind it.
  • Removed the success message, so that the action on the success is called immediately by clicking on Submit
  • Call a tip for the successful event Action. This action:
    • Displays the revision message (success)
    • Hide the submit button
    • Jumps to the next slide and then return to the current slide (this ensures that the buttons next and previous are enabled correctly)
    • Calls a Javascript function to pause the slide.
  • Apply the same to all my slides in question... * sigh *.

  I had already worked around 5 problem according to my original post.

  Again, I want to express some frustration that there are so many workarounds to get training to watch 100%. For example, in one of your tutorials there is a transparent button and once I knew how the workaround has been applied, I put my mouse over it the space where the button was and saw the hand icon. While if you think that users don't notice, I assure you that when the courses are distributed to a few hundred people these things don't go unnoticed! The effort to build workarounds is worsened by having restrictions on question slides that do not apply to other slides, which for example not being able to add a button and having to use a SmartShape (which does not reuse the button styles), etc. That means trying several solutions workaround until you can find one where all the workaround steps are feasible and you can get a perfect result.

  In any case, I'll mark this message as answered and call it a day (I have another question about styling SmartShapes used as buttons but post it separately) =)

  Thank you

  Sarah.

  

• Hide Slide widget on question slides

  Captivate v5.5

  I have the slide number widget on my first slide, the value to display for the project - which works very well.

  However, I have a series of question slides toward the end of the project on which I posted 'Question 1 of 10 etc'.

  In these issues, I would stop the number of the slide (of the widget) being seen and then reappear again a few final slides.

  Is this possible and if yes, how would you please?

  Noel

  Hi Noel,

  No problem on CP5.5. Here are the steps:

  1. On the first slide of the issue, in the face of the drawer properties go to the accordion in Action
  2. On enter (slide) select hide, then choose the label of the widget
  3. On the first slide where you want to display the widget repeat once again, this
  4. but now, choose display and choose the label of the widget

  It would have been a problem in 5.0 because you could hide the widget, but not show it again on a later slide.

  Of course, the numbering will continue all in hiding, is this OK? So if you have 7 slides and widget is hidden on slides 3-5, on slide 6 it will show 6 out of 7.

  Lilybiri

• Can Captivate 6 reset a simple question slide?

  Captivate 6 has the ability to reset a simple question slide?  I know I could use the widgets for custom (via this discussion http://forums.adobe.com/message/4349072) questions, but I wanted to see if it's built-in to COP6.

  Structure of CBT (simplified example)

  Cover the slide list sections A, B, C, with "Show Me" and "Test me".

  1-10 of slides: demonstration, section a.

  11-20 of slides: demonstration, section B

  21-30 of slides: Demonstraction, section C

  Slide 31: Question for the section slide has

  Slide 32: Section B Question slide

  : Slide 33 Question for section C

  If a user forgets the question in section A, they are sent to revise section A again.  At the end of section A, the learner is sent to slide 31, question slide A section (using variables to know that they already do not have the issue once).

  Problem: When they are referred to the section a question, he does not answer them.

  Goal: Restore the question during the second attempt slide is still a Virgin.  Once the slide 31 pass, they will be addressed to the slide 32: 33 drag, etc..

  Thanks for all your help so far.  This CBT is one of the most advanced I did for this organization.  They have certain requirements really well.

  Micky

  Hey Micky,

  I tried to reproduce your script and it worked fine for me, it would be useful that you can share your project ([email protected]).

  Kind regards

  Avinash

• Fill in the blank question slide

  I use Adobe Captivate 5.5 for Mac, my fill in the blank question slides do not work.  Show the answer and the box for the answer is so small that either you do not see what you type or well you can not even your inside slider to type at all.

  Captivate 5 has been rewritten from scratch, and indeed some questions are not upgraded to good. Really believe that the best way to solve this problem is to recreate those annoying question slides. This is the reason why I asked for your workflow because I find the fill-in-the-Blank questions behaves much better in 5.5 than in earlier versions.

  Lilybiri

• In the tutorial renders Sub unanswered question slides

  Hi, I looked through the last months of questions and do not exactly my problem.

  I have a Captivate 4 linear project and has questions (without partitions reported to LMS) throughout to reinforce learning.

  When a learner gets to an item in the series of quizzes and wants to return to a previous content slide (with OCD or arrow to the left on the navigation bar - I don't have arrow to the left of the Question slide itself.) they cannot return to the issue and take it. The question seems to be locked up and they get the error message below. It is a question that they never tried.

  

  I am not a "back button" on the issue because I don't encourage that, but I on the parameters of the Quiz "allowing travel to the rear. If the problem will be solved, then I'll add this button. I was wondering if there is another setting that I can change.

  The parameters of the question are:

  

  This is the incomplete feedback message by default.  I would check the number of attempts for the quiz.  I believe that if they leave the slide he woud be like jump, which is like a bad response. Which can cause the quiz to be omitted.  Have you checked the tab of failure pass under preferences of quiz as well?

• If the hard disk dies this affect router/WiFi?  I know that this seems to be a strange question.

  If the internal hard drive dies this affect router/WiFi?  I know that this seems to be a strange question.  Logically, they seems to be two independent functions.  However, since I do not understand how it works...

  I plan to spend my old airport extreme (about 7 years) at an airport new Time Capsule or Airport Extreme for better wi - fi range.

  Where the internal hard disk come into your Airport Extreme or Time Capsule dying airport upgrade?

  If the disc is dead, it will be not not to be replaced. This should be done first before to other devices.

• Strange question - width ListItem

  While developing applications, I noticed a strange question.

  When I draw list in qml item available, it's very nice on an excerpt:

  I put

  horizontalAlignment: HorizontalAlignment.Fill
  

  and the width of the list item fill all empty space, but when I check the list on Simulator it encapsulates the width of content?

  Does anyone know how to set the width of the listItem to fill all the space from left to right?

  To sum up,

  I want to have (and it looks like this on qml overview):

  

  but I get this (width of list point fits only the content):

  

  Thanks in advance.

  Hi, there may be simpler but for me it works using the spaceQuota:

  ListItemComponent {
      type: "item"
      Container {
  
          background: Color.Red
          Container {
              preferredHeight: 230     
  
              layout: StackLayout {
                  orientation: LayoutOrientation.LeftToRight
              }
  
              Container {
  
                  layoutProperties: StackLayoutProperties {
                      spaceQuota: 1
                  }
               }
           }
       }
  }
  

• Question slide

  In the question slide:

  I can't remove the blue boxes and amount of text which has put out there.

  For my project, I am using the theme "chic".

  How can I do to remove it?

  Go to the "Master Slides" (I don't know the word used in the French version). If you are in the UI (User Interface) beginner, to look for the button that takes you to the 'Master slides which will replace the "film" that is left on l' screen. Maybe you would find also in the menu "window". Excuse me, but I only use the user interface specialist.

  The Master Slide (google) translation would be 'Central slide', but I am not at all sure that this translation was used by Adobe.