XP - D: disk system recovery does not

Similar Questions

• system recovery does not reach 50%, presario CO61-312SA

  Presario CO ^!-312SA does not start. Click f11 to start recovery of the system that does not reach 50%. I understand that the wireless switch should be during the restore process, the wireless button will be red or blue? If it should be blue, then I can't go blue... If one red so... it is!

  I bought Windows 7 drives home premium but have no idea how do I reinstall my OS... There are 2 disks for 32-bit and 64-bit, but I can't read the sticker on my laptop to see what I need to use a disc.

  Any information you can give me on any of my questions today will be very appreciated, thank you x

  Hello

  You have a few options in my opinion please find the steps below may help you solve the problem.

  (1) Please run the hard drive & memory test and check if any part fails, you will have to replace the part. If both the test passes you can call the HP technical support to order the recovery again disc.

  Test a hard drive by using the Built in Self Test

  Let us know how it goes!

  * Although I am an employee of HP, I speak for myself and not for HP.

  Click the White Star Kudos to say thank you *.

  Please check accept as Solution if it solves your problem *.

  Concerning

  Maton

  
  

• Windows 7 upgrade failed - disk HARD recovery does not work

  I just received my Windows 7 upgrade disc, followed the procedure and he managed to upgrade Vista 64 bit for Windows 7 32 bit! Some drivers also seem to, were charged more than once.

  I tried to do a system restore from the recovery of HARD drive partition - and it won't!

  Can someone, please?

  Hello

  Drive HARD recovery does not work because Win 7 ran the Boot Manager and maybe the HDD partition has been affected.

  I guess you want to roll back to Vista preinstalled Toshiba.
  I think in your case, only the recovery disc will help you.

  Welcome them

• Problems starting HP Mini 210-2100, partition deleted, flashing the line underscore, System Recovery does not

  Hi all

  my situation is like this:

  When I turn on my laptop I get a black screen with a flashing underscore above it "no boot device - insert boot disk and press any key" (even if the BIOS boot order a hard drive for laptop on top). I changed this order a couple of times because I used a USB stick with Windows 7 on it (black version) to enter System Recovery Options (without USB I can't access the system recovery (F11 doesn't work not).)

  My System Recovery Options window is white/empty (no operating system, the size of the partition and the location). I'm going on and click repair system that did not help (it of a loop, do not start Windows). In the Diagnostics and repair of details it is Root cause found:

  The partition table doesn't have a valid System Partition.

  Repair action: Partition table repair

  Result: Completed successfully. Error code = 0 x 0

  That's because before this problem starting with underscore flashing, I had another problem: "BOOTMGR is missing. Press Ctrl + Alt + Delete to restart» I was impatient and wanted to fix that quickly and made a big mistake, after looking on the web for some time I have found no useful websites describing how to fix it (I found one when it was already too late). I went on a channel on youtube and came with: https://www.youtube.com/watch?v=S8n-G9Rv2zo before I didn't know what a clean install was, I looked up 03:55 and made perfect:

  CMD:

  DiskPart

  list disk

  Select disk 0

  partition from the list

  selected and deleted all 4 partitions (size: 215GB, 199 MB, GB, 103-17 MB)

  created new partitions same dimensions (all the primary dimensions)

  then I stopped and clicked on a cross (x) in cmd to get out when I came to a new window where I clicked on YES (I have not read what he was doing, I just wanted to go to bed because it was too late). Since there is no "BOOTMGR is missing. Press Ctrl + Alt + Del to restart"(damage because now I know how to fix this, I was just too stupid, impatient and irresponsible), there is just a line of underscore flashing with"No boot device - insert boot disk and press any key"any of the BIOS boot order is this sentence does not disappear. He did a couple of times before, but no more.

  So after this long description, my question is:

  Is there a way to recover my data which I assume is lost and can not restore? I have no backups or images.

  P.S. I do not installed Windows 7, I just deleted partition table and created a new.

  Sorry for my English, I'm not a native speaker. Thank you in advance.

  Hi MatBar,

  Thank you for visiting the Forums HP's Support and welcome. I'm sorry but there is no way to recover the data once you have deleted the partition. You could try a local repair facility, given that some devices of data to recover your data.

  You may restore the Windows 7 operating system with disks if you find someone with the same version of Windows that you use their discs.

  I hope this helps.

  Thank you.

• System recovery does not work?

  I have a HP Pavilion dv2910us, and I need to perform a recovery system on my laptop. I tried to press F11 when the computer starts, and it does nothing except it emits a loud beep and continues on its way, commissioning. So when it does not work, I came across the site of HP to look for another way may be to perform a system recovery that I never knew. I found that I can open the Recovery Manager in my Start menu and run the operation there. I tried about 15 times, following the specific steps that were given to me and even another way, that I found on the forum. All that happens is my computer restarts and I get into my account and it's the same as it was before. I really need perform this system recovery. I already moved the files that I need to save to an external hard drive, and I really need to solve this problem. What I am doing wrong, or how do I restore my laptop to factory in another way?

  Additional information: my product number is FE989UA #ABA and the series is 2CE8200Y5Q.

  Message edited by snowshoe on 24/07/2009 22:36

  sha3ko wrote:
  I have the same problem, and from what I know, if you have upgraded or downgraded your computer (in other words, if you reinstalled the operating system other than the original) it will cause corruptions on the recovery partition in drive D. I tried to find a way to retrieve the recovery partition, but it seems that there is no way unless you are a computer genius. My final solution just order a set of hp recovery disks, but I'll try that before I pay for it. Good luck with yours.

  Try this >

  1.right - click on the "Computer" icon and select manage.
  2. This will launch the Microsoft Management Console.
  3. on the left side of the MMC console, click "Disk management" and it will show you all the partitions.
  4. right - click on the "HP Recovery" partition and select "Mark as Partition Active."
  5. when the warning message appears, select 'Yes' - restart the notebook and it will automatically start in the Recovery Manager without having to press F11.

• 10.6.8 startup disk System Prefs does not route El Capitan

  I have a mid 2011 13 "MacBook Pro ("MBP").

  It worked 10.6.8

  I use SuperDuper to backup bootable external hard drive to the top.

  I have the 10.6.8 cloned system and it is bootable from an external Lacie Rugged Triple HD, connected via Firewire.

  I installed 10.11.3 on the MBP and it works fine.

  I need to boot from the 10.6.8 backup to access some files and that worked fine.

  When this 10.6.8 HD is connected via Firewire to the MBP shows up in startup disk options while it is started from 10.11.3

  But, now I want to reboot of HD in MBP 10.11.3 can't do running.

  When the startup disk is open when running 10.6.8 from the external hard drive the internal drive in the MBP 10.11.3 running does not appear as an option to restart the system.

  Y at - there a trick to getting the HD 10.11.3 appears in the startup disk?

  If not, if I just stopped the MBP and then remove the external hard drive, the MBP starts its internal HD with 10.11.3, despite the fact that I am not able to select it from the boot disk before you stop? /

  Thanks for any help in advance.

  This is because in SystemPreferences-> StartupDisk disc is not set how you want to start.

  To avoid this kind of situation when the two BONES are connected:

  Hold down the Alt (option) key during startup: it will open the "bootmenu": choose the OS disk to use.

• Dell DataSafe - 'Create System Recovery' does not recognize my USB flash drive

  Hello

  I just set up my new laptop Inspiron and 'Dell DataSafe Local Backup Basic Edition' pops up advising me to "Create system recovery media" restore my system to its critical failure of hard disk factory settings.

  It gives me the option to save this on a disk or a USB Flash drive.  I have a drive hard laptop "Western Digital My Passport Essential' that I would use for this, that's why I chose the option of USB Flash drive.  However, I get a message "no USB key not found.

  Can someone tell me what I need to do to store the backup recovery system on my laptop hard drive?  (I know a recordable DVD will be probably easier, but I did not and do not want to buy a bunch of them just for that!)

  Any notice received with gratitude.

  Thank you

  I think you may be stuck. It may be opposing on the hard drive because there are already data on this topic.

  You have a friend that can give/sell you a blank DVD?

  Ron

• Equium - dead after hibernation, the system recovery does not work

  Hello
  I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

  She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
  So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
  I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
  I removed the battery and put back in place, without result.
  Connection to an external monitor shows no results.
  When I put the original CD recovery Toshiba, no results.

  So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

  Any help or ideas would be very appreciated! ;)
  Daniel

  Hello

  My laptop could not wake up after hibernation too but I managed to wake up again.
  This;
  Disconnect the power adapter and remove the battery.
  Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

  After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
  This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

• My system recovery does not work

  Hello
  I have an e-machine computer with windows xp. I want to recovery s sytem to completely wipe my computer and bring him back to the original configuration. When I put my cd/dvd for system recovery, all right after that I restart until it comes to the loading screen for the recovery of the PC Angel system. After that it is trying to load the computer ends by crashes and I can't start the recovery of the system.

  WHAT DO!

  Thank you

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  http://www.eMachines.com/support/product_support.html

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• System recovery does not respond to Ctrl + F11

  This Dell XPS M140 is initially loaded with Windows XP Media Center 2005.  The recovery of the system used to respond to Ctrl + F11; but someone recently installed Windows XP on retail CD and now the Ctrl + F11 opens is no longer the system recovery.

  Is there a way to fix this?

  
  

• F11 system recovery does not

  Hello I have a desktop Compaq SR2150NX that came with Vista, but set to upgrade to windows 7 computer.  However, I need to make a full recovery, including formatting the C drive and reinstall the Vista operating system.  However, the F11 works at startup is no longer work.  I remember there was some kind of patch to fix this problem, but I can't seem to locate it.

  The recovery partition is still intact, so I should be able to do the recovery if I can get the fix, OR if someone has a way for me to do a "factory" full restoration of my system using the existing recovery partition.

  Thank you

  Hello

  There are two options to attempt to reinstall your original Vista installation - the 2nd is the easiest, but you can try the 1st to see if it will save you having to order a replacement set of disks - make sure to save any important files first.

  1. If you can still boot into Windows, hold down the Windows key and press R.  In the run box, type compmgmt.msc , and then press ENTER.  Click on management of the disks in the left pane and when loaded partitions, make a right click of the recovery Partition and mark it as 'active '.  Close all windows and then restart - if it worked, the PC will start the recovery Partition during the restart.

  2. you can order a set of replacement recovery disks using the link below.

  http://support.HP.com/us-en/document/c00810334

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  

  Kind regards

  DP - K

  

• HP Pavilion dv6-6181TX. System recovery does not HP Recovery Manager.

  
  

  If you have more than 4 partitions, you need to delete the partition/additional partitions, then convert the disk hard back to base.

  Older versions of free Partiton Wizard work:

   

• Satellite L670 - the system HARD drive recovery does not start

  Hello together,

  I have a problem with my laptop. I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  Now I want to restore the original Windows Home Premium. On the laptop is a second partition with a folder named "disk HARD recovery.

  When I hold the button '0' on start nothing happens. The beginning of doesn´t of system recovery.

  Can you help fix the problem.

  Thank you and best regards,
  Dinder

  Hello

  This does not work because you have installed Win 7 64 bit as you said here:
  > I installed Windows 7 Ultimate 64 bit, that the laptop came with Win7 Home Premium 32 bit.
  But have you tried also pressing F8-> fix my computer-> drive HARD recovery?
  Try this

  Otherwise, drive HARD recovery does not work because the boot manager has been changed or damaged as a result of the new install of Win 7 and this is why you cannot load HARD drive recovery.
  That is why it s always recommended to create a recovery disc before changing anything on the HARD drive.

  What to tell buddy you need recovery disks. I guess that you have a European model for laptop

  You can order the recovery discs here:
  https://backupmedia.Toshiba.EU/landing.aspx

• System repair & Recovery does not work / Vista Windows Mail won't open attachments sent with PowerPoint Slide Show

  System repair & recovery does not work.  When I use it, it never restarts the computer.  I have left running and went to bed and is still running the next morning.  The SR & R is grayed out and will not open.   When I restart the computer after that it ran all night, a message appears to tell me that I cancelled the operation.  Help!

  I have another problem with Vista Windows Mail; I can't open attachments are sent using Microsoft PowerPoint Slide Show.  The message is: * this file does not have a program associated with it for performing this action.  Create an association in the set Associations Panel.  I don't know anything about computers or the control panel.  How can I fix these problems?  Help!

  Problem with recovery to factory settings or system/process of repair software, contact the manufacturer of your computer.
  It is their software/recovery process, not Microsoft.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You need PowerPoint or a viewer PowerPoint installed on your computer to read PowerPoint attachments.
  Learn about file Associations in the lower part of this response.

  need .doc or .docx Word or a Word Viewer for playback file extensions, etc, etc.
  .xls Excel need.
  need for .pps PowerPoint

  Here are the download links for free Microsoft Word, Excel and PowerPoint viewers:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3657ce88-7cfa-457a-9aec-f4f827f20cac&displaylang=en

  Word Viewer

  View, print and copy Word documents, even if you don't have Word installed. This download is a replacement for Word Viewer 2003 and all previous Word Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=1CD6ACF9-CE06-4E1C-8DCF-F33F669DBC3A&displaylang=en

  Excel Viewer

  Open, view, and print Excel workbooks, even if you don't have Excel installed. This download is a replacement for Excel Viewer 97 and all previous Excel Viewer versions.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=048dc840-14e1-467D-8dca-19d2a8fd7485&displaylang=en

  PowerPoint 2007 Viewer

  Microsoft Office PowerPoint 2007 Viewer allows you to view the presentations of all the features created in PowerPoint 97 and later versions.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And here is a link to a set of free office of Applications:

  http://www.OpenOffice.org/

  And to set file Associations:

  http://articles.TechRepublic.com.com/5100-10878_11-6172036.html

  How do I... Change file extension associations in Windows Vista?

  See you soon.

  Mick Murphy - Microsoft partner

• Drive HARD recovery does not not for Satellite Pro L450D-12 x

  I have a laptop that I'm fixing for a friend.
  According to toshibas official specification it is than a HDD recovery partition which is hidden.

  For a reason unknown to me, now the 0 (zero) key does not work. F8 does not work either and the windows system restore does not seem to get me there either.

  Can someone please explain to me why this is happening?
  Nobody ever touched the hard drive on the alleged recovery hidden partition which is toshibas official specs 100%...

  Anyone share a few ideas with me here please

  Kind regards
  Andrew

  Hello

  The HARD drive recovery partition is not hidden
  In my case the image files when placed on the second partition in Toshiba HDD folder.

  However, the fact is that HARD drive recovery could be launched by pressing the F8 key, and then choose the option called repair my computer and in a new window the recovery HARD drive option should be chosen.
  If this is not possible, then you will need to retrieve the laptop using the recovery disk.

  I guess that this disk is not created in the past. Right? You can create the disc using the recovery disk creator which is preinstalled on all Toshiba laptops.

  If this is not possible, then you must order the CD here:
  http://backupmedia.Toshiba.EU/landing.aspx