Tecra A4 recognize only 512 MB of memory

Similar Questions

• Install with only 512 MB of memory

  Boss wants me to use Dreamweaver for web pages of work, her order Creative Suite 3 Design Premium
  
  When I went to install yesterday, a message displays that I need at least 1 GB of memory (just 512 Meg)
  
  Boss contacted, more memory was ordered.
  
  In the meantime, is there a reason why I should not ignore the message memory and go ahead and install?
  
  It is via the license key (I keep) and a DVD from the vault of the COMPUTER (which I need to go back) so I would go ahead and install it so I can return the discount... but only if it will not cause problems where 'something' didn't install correctly
  
  Anyone know if installing with 512 Meg is OK?

  I did some research and found the installation help number 800-642-3623

  Answer - installation will NOT correctly work with only 512 Meg

  PS - I was told that the 1 Gig on the installation screen also would not 'very good' is a good thing, I told my boss to order 2 each memory Gig 1 glue (and, when they arrive, I will check the stamping to check all are at the same speed and will try to add the new 2 sticks on the 256 Meg 2 existing sticks to see if the motherboard will see and use 2.5 Gig... and) If not, I'll just take the 256 glue out and send them to our surplus Department)

• I have 2 1 GB ram sticks in my computer and it recognizes only 512 MB on each stick.

  HP compaq dc7100cmt

  Data sheet:

  System *.

  System manufacturer: Hewlett-Packard
  Model: HP Compaq dc7100 CMT (PC936A)
  The system version:
  IdentifyingNumber: MXL4400F7V
  System type: X 86-based PC

  Motherboard *.

  Mother Board manufacturer: Hewlett-Packard
  Motherboard model: h-0968

  Processor *.

  Processor: Intel (r) Pentium (r) 4 CPU 2 .80GHz
  Processor manufacturer: GenuineIntel
  Processor speed: 2793
  CPU FSB: 800

  ************Bios**********

  BIOS: Hewlett-Packard
  Version: 786 1 v01.05

  Memory details *.

  Manufacturer of memory:
  Installed RAM: 1 GB
  Maximum RAM: 0 MB
  Total slots: 1
  Capacity: 512 MB, 512 MB, 0.5 MB
  Memory type: 0,0,11,.
  Speed: 333 MHz, 333 MHz, MHz,
  Slot machines: XMM1, XMM4, SYSTEM ROM,.

  For some strange reason the pc will recognize that the 512 MB of each stick.

  I use:

  ATU 31090

  Dual channel 1024 MB DDR Kit

  PC2700 333 mhz wooden box

  Can anyone tell or instruct me on how to solve this problem?

  Thank you & God bless

  Hello:

  There is nothing wrong with your PC.

  You bought a 1 GB kit which means you bought 2 x 512 MB = 1 GB chips.

  You need a 2 GB kit which is 2 x 1 GB chips.

  A common mistake made by many of us.

  Remove one of the chips and you should see that it has 512 MB to this topic.

  Paul

• Satellite A100-551 recognizes only 1 GB of RAM after upgrading memory

  Hello

  I just bought a memory of 1 GB of RAM to upgrade my Satellite 2 * 512 to 1 * 1024 + 1 * 512.
  The brand of memory is Crucial.

  Everywhere where I put my memory (1 GB in slot 1, 512 MB in the 2 slot or vice versa), my computer don't recognize only 1 GB.

  Some ideas on this concern?
  What I have to put the same size of memory in each slot, maybe?

  THX in advance for your help.

  Kind regards.

  SBL68

  If you only check this forum and search for RAM upgrade themes, you will see that the people who use essential modules reported on compatibility issues.
  If you want to upgrade to Ram successfully, please use the modules recommended Toshiba or Kingston.

  If you have to choose between price and compatibility compatibility and good work modules, you must choose. Compatible Toshiba DDR2 400/533 1 GB module followed the part number - PA3411U-1M1G.

  For Kingston modules, visit www.kingston.com/

  Good luck!

• Tecra S10-128: Win XP recognizes only 2.99 GB instead of 4 GB of RAM

  Hello

  I have a question.

  I have downgrade to XP Pro (with recovery CD).

  The system has 4 GB of ram (the BIOS screen confirm that), but in system properties I * only 2, 99 GB * of RAM.

  I know that XP pro recognize only 3, 5 GB, but why, 2, 99 GB? I have no understeand that.
  It is the memory used for video preformance?

  Note: I have the latest version of the BIOS available on the download page.

  Thank you
  Jos Rodrigues

  Hello

  > I know that XP pro recognizes only 3, 5 GB, but why, 2, 99 GB? I don't understand this.
  > It's the little memory used for video performance?

  Yes, the 32-bit OS recognize only 3.2 GB of RAM. It is not uncommon that the 32 bits of the operating system
  The 210MB seems to be dedicated to the memory of the graphics card and therefore the Windows XP can use only 2.99 GB.

  See you soon

• Windos 7 recognizes only 2.5 g 4g memory

  I installed on the system from loder (dell XPS Gen 5) to windows 7. I had upgraded the memory to the maximum of 4 Gig authorized. The machine recognizes 4 but said only 2.5 can be used. I understand that the windows 7 32 bit OS has this limitation. Can I install the 64 bit on 32-bit version? What determines which version can be installed on a machine. I used the 32-bit version just because I was running XP and thought that was appropriate.

  Changing from 32-bit to 64-bit requires that you do a complete reinstall of Windows 7 and you will lose all programs and have reinstall you all the applications.

  Since you say that your computer is an older computer, it maybe isn't capable of running 64-bit Windows. As far as memory goes, 32-bit processes more than 2.5 GB, usually around 3.25 GB and the remains of memory can be used by you video which is not bad either.

  You're probably better to just stick with the 4 GB you have installed and leave things because you're not going to see a performance difference between 32 and 64 bit with only 4 GB of memory.

• Satellite A100 PSAA2A - BIOS recognize only 1 GB of RAM after upgrade

  Hello

  I have a Satellite A100 PSAA2A. RAM is up to 2GB (2 slots).
  Now, I have 256MB + 512 MB (Kingston KVR533D2/S4/512) total = 768 MB (Samsung 256 MB DDRII 533FSB).
  It works well

  I want to improve my RAM. I've got Kingston KTT533D2 / 1 G
  I have 512 MB + 1024 MB = 1.5 GB

  I removed 256 MB to 1 GB. Now she has 512 MB and 1024 MB
  But BIOS recognizes only 1 GB (Windows XP as well). I changed my slot machines, a different combination made - always 1 GB (not 1, 5 GB)

  I checked each memory separately 256 MB, 512 MB, 1024MB - works well, but combination of combination and 512 MB + 1024 MB 256 MB + 1024 MB do not work.

  I did a BIOS upgrade and set version 2.3

  Any ideas guys?

  Thank you.

  I m not sure but I think the problem are two different modules. They come from different manufacturers have different abilities.

  If you want to, or more than 1 GB RAM, use should use the same modules. At a time when prices are cheap.

  But you can also test the RAM with special tools like Memtest86:
  [www.memtest86.org]

• Tecra A8 PTA83E - only 3.3 GB recognized by 64-bit systems

  Hello

  I have a Toshiba Tecra A8 PTA83E, recently, I inserted 2x2gb DDR2 PC6400 (800 Mhz), my laptop supports only PC5300 (667 Mhz), memory works well, but under ubuntu (x 64) I see only 3, 2 GB, WIN 7 (x 64) and in memtest 3, 3 GB. Why this behavior? Is because the modules of memory has a greater frequency than those who support the laptop? If I insert a memory module(2GB) at a time I see 1, 9 GB. Thank you.

  Hello

  I guess that the other part of the main memory is shared by the graphics chip.
  What value memory appears in the BIOS?

  If the 4 GB are indicated, then everything should be OK.

• Tecra 9100 - installed like 512 MB RAM, but it slowed down my computer!

  After much fumbling around trying to install my new 512 MB of RAM, I turned on my computer to find that it starts much more slowly. A message popped up saying 'Memory Module added' and my computer shows 768 MB is installed which is correct, because I already have 256 MB installed in Slot 1.

  So why on Earth is my computer even slower! I bought it to speed up the thing! My computer is slow to start, is less sensitive and much better with just the 256 MB of RAM installed.

  I think I might have damaged the RAM or the Slot 2 because at first, I inserted it incorrectly. They should have a video demo on how to install it because the manual didn't help me that much!

  The RAM is crucial and supports my cell phone because I ran tests to determine what RAM I need.

  Can someone help me please!

  Hello

  Well, it is possible that the new RAM is malfunctioning.

  But have you checked the speed of RAM? How much MhZ is the module supports?

  The Tecra 9100 supports PC2100 512 MB (PA3164U - 1 M 51) module and it runs at 266 MHz.
  If the new module supports a lower speed that the old second module will work also with lower speed.

  Moreover, I would not recommend using modules without name. The performance is bad. Kingston modules are much better.
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=6183&ft=m&St=3

• Satellite P20 S203 does not recognize my additional 1 GB memory

  Hi all

  My computer (Satellite P20 S203) does not recognize my second Bank of memory (1 GB). I have two banks of memory of 1 GB installed. BIOS reports only 1 GB, Windows reports that 1 GB and my Linux so he says only 1 GB of memory. I removed each Bank of memory and restarted the computer successfully in each of the two slots, No Problem, but when the two banks of memory are inserted, it always uses only 1 GB. My BIOS is on version 2.10:

  BIOS is the PhoenixBIOS 4.0 Release 6.0

  I know it's an old computer (about 10 years), but what could cause such a problem?

  Thanks a lot for any advice or suggestions!

  Kind regards
  Andy

  Post edited by: fuegi_1

  Hi fuegi_1,

  The upgrade modules, bought exactly?

  To me it sounds like that it s a compatibility problem or your computer laptop doesn't support 2 GB.

  If you use two memory modules, you must only use two modules of the same production.

• Server recognizes only half RAM

  Hello, we have 8 HP Server Proliant DL 380 G5 with p56 2011.02.05 Bios version (the latest being, if I understand correctly). Now, all the servers have 4 1 GB FBDIMM, which works very well.

  Recently, we decided to upgrade and bought memory KTH-XW667LP / 8G (according to the manufacturer, it is equivalent to 466440-B21 HP / COMPAQ and is fully compatible with this model). I installed two 8 GB FBDIMM in one of the servers, but it only sees half of the memory. Instead of 16 GB, it recognizes only 8 GB.

  Now, I have tried several vaiants:

  1 all 4 1 GB FBDIMM (former) is placed in the banks 1A and 3A, 2 and 4 C. The 8 GB FBDIMM are placed in banks 5b and 7B (according to the guide, this should be good). The server shows 12 GB (in BIOS and RHEL). That is, he fully acknowledges the old memory, but not the new.

  2. the old memory is completely removed for test purposes. The 8 GB FBDIMM are placed in banks 1A and 3A. The server shows 8 GB only.

  Now, I have tried on three servers with various 8 GB FBDIMM (we bought 10 packs) to make sure, that it is not caused by damage of server or memory. Nothing is done, the result is the same. I guess, the problem is not in the servers and not in memory. There is no update of the BIOS that I can install (we have the most recent version). So, what could cause this problem? Maybe I need to change something inside the server to recognize the memory? Maybe it's a mechanizm of redundancy of memory, which can be turned off or what?

  Hello:

  I don't have an answer for you, but I see that you posted your question on the Business - servers-HP Support Forum.

  I recommend that you copy and paste your question on a new post.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264

  Paul

• WINDOWS 7 32-bit Enterprise recognize only 2.94 G of ram

  Hi, I have a ProBook s 4530 and I got display the operating system windows 7 Enterprise 32-bit to windows 7 Professional 64-bit with 8 GB of ram, and the system recognizes only 2.94.  I expected to recognize 3.5 G DO NOT ALL THE 8 G.  What can I do for the system to recognize it at least 3.5 G

  This can happen if your system is to have an integrated video card installed based on shared memory architecture. He can use the missing memory.

• I have an iMac 3.06 GHz with only 4 GB of memory.  During last two weeks, whDurin the past two weeks, when I click on 'Edit', it does not hold the menu drop down.    Need my Mac 'cleansing' and how do I get rid of unnecessary files?

  I have an iMac 3.06 GHz with only 4 GB of memory.  During the last two weeks, when working with documents, buttons on the desktop did not have in the drop down menus.    How can I get rid of unnecessary files and wipe the hard drive?

  Drop down menus stay open at other times? Have you tried another mouse? More information please write an effective communities of Apple support question

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)

• The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  The sony handycam dcr-hc30 can endure more than the 512 MB original memory? Thank you.

  According to this table of compatibility: http://esupport.sony.com/perl/support-info.pl?&info_id=11 DCR-HC30 may use the following maps:

  Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB

  Mark 2 Memory Stick Duo Pro - 1 GB, 2 GB and 4 GB.

  You can read the table to make sure I was reading it correctly.