XP recognizes my drive to 500 GB like a 128 GB drive

Similar Questions

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• I want to transfer my files to my external hard drive free windows click on my mac, it recognizes the drive but I can't nothing or see the files. Any help is appreciated

  I need to transfer my files to my external hard drive free windows click on my mac.  I can see the drive but cannot do anything or transfer.  any help is appreciated.

  The drive does not appear in the Finder?  Do you get an icon for it on your desktop?

  You say that it recognizes the drive, how exactly, what is the point?

  What happens when you try to use it?

  How the drive is formatted?  Is it encrypted?

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Since the update of AV adapter, MacBook doesn't recognize, or feeds the La Cie Porsche 2 TB disk I use since I bought the MacBook. Other Mac power and recognize this drive. What is going on?

  Did you see if the ideas presented in the response of this other thread can help?

  Multiport USB - C map update will not install

  A few usual ideas, reset SMC, the NVRAM reset, start in safe mode; VR;

  the kitchen sink; wash the cat... burning incense. I would try a variety of things!

• my wood recognizes my drive hard ide but my dosent XP windows

  my wood recognizes my drive hard ide but my dosent XP windows

  Hello

  (1) you are able to start in the Office?

  (2) you get any error message?

  (3) who is the manufacturer of your hard drive?

  (4) don't you make changes to the computer until the problem occurred?

  As work all about check if the hard drive is detected in disk management, and then try to configure the disk. To do this follow the steps mentioned in the article below.

  How to use disk management to configure basic disks in Windows XP

  http://support.Microsoft.com/kb/309000

  Important: You can also change the hard disk boot priority in the BIOS and check if it helps.

  Hope this information is useful.

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Acer aspire 7520 laptop my laptop cannot recognize my driver for cd/dvd drive.

  original title: acer aspire 7520 laptop
  my laptop can not recognize my driver for cd/dvd drive. I have been informed that it is due to the use of vista

  can you help me pls

  Hello

  It would be very improper for any Windows operating system to does not support optical drives, especially if the laptop comes with Vista in the first place. So I'm afraid you've been misinformed. However, this link can help you to solve the problem...

  http://support.Microsoft.com/kb/314060

  Please post back with (a lot) more in detail if you still have questions after looking at the above.

  Tricky

• HP G60-235DX notebook pc does not recognize the drive d (cd - dvd drive)

  I'm reading a music cd in d drive.  My computer does not recognize the drive.  I can solve this problem?

  Press the Windows Logo key and the R key to open the run.

  Type;  regedit, and then click OK

  Navigate to:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  With the right button of the upper filters button, if necessary, and then click 'remove '. Click on the Yes"" button.

  Click the lower filters key, if present and click 'delete '. Click on the Yes"" button.

  Try again your CD.

• Windows Vista does not recognize the drive c does not appear in 'my computer '.

  When I try to use the c drive, it turns only. 'My computer' does not show the c drive, but did before. How can I get Windows to recognize the drive again?

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect.

  original title: old Hard Drive Access

  I have recently had problems with my pc, I decided that I will buy a new Tower, but I really need to get some files off the old hard drive, I bought and pregnant for the SATA drive out of my old pc. I'm now trying to get the files on my old drive through my laptop. The laptop is running Vista. My laptop recognizes the drive but does show that two files named "My Data Sources" and "Bootsect. When looking at the properties it shows that the majority of the disc is full, only 30 gigs for free the 160 GB drive. I don't understand why I can't access to find one of my old files. Help, please!

  Hello

  ·          These files are encrypted?

  Step 1: Step 1: temporarily disable the security software and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-vist/disable-antivirus-software

  Note: Make sure to allow him to return so that your computer is protected.

  Step 2: Run a check disk.

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

• WMP11 does not recognize USB drives

  I have 2 laptops, the two Vista running. Both have WMP 11. We recognize USB drives in WMP11 and allows playlist to copy to them. The other laptop recognize USB drives (I have a variety of brands and sizes) in Win Explorer, will play the music of their share in WMP11 but will not recognize USB keys for use with copy of the lists of reading or synchronization. Sync, refresh devices does not help. Same result if USB is directly connect to the laptop or connected via USB multi hub. USB key works perfectly in all other respects, but WMP11 is unable to locate one of them.

  Hi MarcGG,

  ·        At the devices detected before?

  ·        Do you remember the last changes before the show?

  1. check if the sync settings are correct. To do this, follow these steps.

  a. open Windows Media Player.

  b. click the arrow below the Sync tab, point to the device and then click Advanced Options.

  c. the Properties dialog box for your device is displayed. Tab sync, box start sync when device connects checkbox.

  d. restart the media player.

  e. the next time you want to sync, connect the device to your computer, click the Sync tab, and then click Start synchronization.

  For more information, please see the link below: set up a device to sync in Windows Media Player:http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  2. Add a device to sync in Windows Media Player.

  a. start Windows Media Player and connect your portable device into a USB port on your computer. A box of "Windows Media Player ‑‑ Device Setup" appears, showing that he recognized the device and provides an opportunity for you to name your device.

  (b) read how the player will sync your device, which is directly under where you type the name of the device. If storage of the device is more than 4 gigabytes, for example, and your library on Windows Media Player fits on this device, the player chooses automatic.

  c. selection of automatic syncing means that your device will reflect all your Windows Media Player library and it will do so that whenever it is connected. Click on "Finish".

  d. to synchronize only some of your library when the player chose automatic, you can choose what will sync when you open Windows Media Player. Click on the portable device in the right pane and drag the items you want to synchronize with this device.

  e. selection of a manual synchronization indicates that the player has detected that the portable device has no place for your entire library. Click on "Finish". Open Windows Media Player, select the portable device in the right pane and drag the items you want to synchronize with this device.

  For more information on "Windows Media Player sync: frequently asked questions" visit this link:http://windows.microsoft.com/en-us/windows-vista/Windows-Media-Player-Sync-frequently-asked-questions

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not recognize my drive Blu - Ray LG Electronics WH10LS30

  For over 3 months now, my computer decided that it didn't recognize my drive then under Windows. Seen in the Bios very well. I can not even start it. But once I am on Windows, it does not yet appear and it says that it cannot install the driver correctly in Device Manager. It is almost impossible to find a driver for this device. Anyone having problems with this drive? I'm using Windows 7 Ultimate 64 bit.

  Hello

  This hard drive is fully compatible with Windows according to the compatibility site.

  Windows 7 compatibility for LG ELECTRONICS WH10LS30 Blu - Ray player: LG ELECTRONICS. Drivers, updates, downloads:
  http://www.microsoft.com/Windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=LG%20ELECTRONICS%20WH10LS30%20Blu-Ray%20Drive&v=LG%20ELECTRONICS&uid=WH10LS30&l=en-US&pf=1&pi=2&c=Storage%20Devices&sc=CD/RW%20/%20DVD/RW&os=64-bit

  I would recommend that you contact LG Electronics support to ensure you have the latest driver and check all of the current problems with this product.

  Customer service LG & Support product. LG USA:
  http://www.LG.com/us/support

  Tell us what you find.

  Concerning

• Hello, my adobe ID does not recognize my driver's license. Can you help me.

  Hello, my adobe ID does not recognize my driver's license. Can you help me.

  Hello

  I checked with your Adobe ID on the forums there is no product approved in this regard, please let me know if you have any other Adobe ID in a personal message.

  Kind regards

  Bani

• Windows XP does not recognize Portable Toshiba external 500 GB hard drive.

  I bought a Toshiba Portable external 500 GB hard and connected to my Windows XP. My windows XP will recognize any unit. I went into my computer > management > drivers to find the drive and rename it. He wasn't there. I have Windows XP SP2, and I said that Windows XP SP3 is not compatible with this device.  I went to control panel > adding hardware > allow Research Assistant for devices not installed and it still did not.

  Any suggestions?

  In the future, please start your own thread.  It does not appear that your problem has much in common with that of the previous, other than you poster, both have a problem with an external drive.

  Open disk management (start > run > diskmgmt.msc > OK)
  Your portable player should be shown here (probably as "disk 1" in the lower pane)

  

  If the disk space presents itself as "Not allocated" (as in the figure above), right-click and select "New Partition".  During the operation of the wizard, you assign a drive letter.  I suggest that your format using NTFS.  Once the disk has been partitioned, formatted, and has a drive letter, it should show in my computer.

  If the drive is already partitioned and formatted, see if you can assign a drive letter to right-clicked on.