XP SP3 / print USB media missing from Device Manager - Bus USB controllers.

Similar Questions

• AFD missing from Device Manager - no network connectivity

  We have a customer with a virus.  Once removed, we noticed that the network connection is always "obtain an ip address.  Find DHCP cannot start because AFD does not.  We cannot start AFD due to no devices being present.  There is no AFD in under non plug-and-play drivers Device Manager.  In HKLM, there are appropriate under the currentcontrolset\services key entries.    The afd.sys file is there and has even been replaced by a good.  How you can AFD add back to the Device Manager.

  If the AFD is missing from Device Manager, view, show hidden devices you can add.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines in bold text in the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD]
  "DisplayName" ="AFD".
  "Description"="AFD Networking Support Environment.
  "Group"="TDI".
  'ImagePath"="\\SystemRoot\\System32\\drivers\\afd.sys '.
  "Start" = DWORD: 00000001
  "Type" = DWORD: 00000001
  "ErrorControl" = DWORD: 00000001

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Parameters]

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05,12,00,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 0, 00, 00, 00, 00,------.
  00,18,00, fd, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 23, 02, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\AFD\Enum]
  "0" = "Root\\LEGACY_AFD\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  fixafd.reg

  After you save the file, close Notepad.

  Locate the file fixafd.reg on your desktop and double-click it.

  Alternatively, you can right-click on the fixafd.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the fixafd.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• PA: Uninstalled my webcam drivers and now webcam is missing from Device Manager

  Hello

  I had trouble with my webcam I decided to uninstall the driver to try reinstalling one from scratch.

  The problem is that now my webcam is still not displayed in Device Manager, so I can't access its settings to try to update the driver.

  It was a very stupid thing to do, and now I don't know what to do...

  Thanks in advance!

  Cecilia

  Hi Cecilia,.

  Unless you have already done, the first thing I would say is just to reboot the laptop and see if Windows RE-discovered the Webcam and load a driver for it.

  If this does not work, try to run the system restore to return the machine to a point in time before that you deleted the windows driver - see Option 2 below.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html#option2

  Kind regards

  DP - K

• CD-ROM/DVD-ROM missing from Device Manager, FRUSTRATED!

  I jumped on my computer today, to copy a disc in iTunes and found that Windows is for some reason, do not recognize my DVD/CD drive.  Now, the drive is very good; This works.  I put in a disc and it runs.  But that's all.  I go to Device Manager to see what is the problem and I find that the knot of READERS of CD-ROM/DVD-ROM is missing altogether.  -What happened?  If anyone can help (not you, Rob;) I already tried everything in your list of suggestions), please.  I would appreciate.

  DT

  Hi Dtorres,

  • What exactly do you mean by it works when I insert the disk?

  If the device is missing in the Device Manager, it may be due to hardware failure or if the drive cables are not connected properly. This can also happen if there is a damage in the drive cable, windows will not be able to detect the drive.

  However, you can contact the computer manufacturer to verify if there is any firmware that you can install for the CD / DVD player and if you can run a diagnostic tool for the material.

  You can also start the BIOS of your laptop and check if the drive is detected in the BIOS and post back the result.

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion G6: Wi - Fi mobile missing from Device Manager download driver does not help

  I have an old HP Pavilion G6-1d98dx I got like a hand running Win 7 Home Premium 64 - bit SP1 and cannot get the wireless working.  The orange/amber light on the F12 key is on and cannot be disabled.  The Wi - Fi equipment is Ralink 5390 rev3.  The device does not appear in the device as one 'hidden' or 'other' Device Manager, much less as a network device.  I downloaded several different drivers on the HP site for this unit, including a dated January 2016, without success.  Any suggestions?

  At any time.

  I am pleased to have been of assistance.

  You don't need to do a thing... the card will work, or it will not be passed the HP welcome screen until you get a card error wireless not supported.

  Here are the links to the wireless and bluetooth drivers you need for this card.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp57965.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp55079.exe

  Please post back and let us know how did the swap of the wireless card.

• Missing drivers from Device Manager

  Hi, I have a Pavilion dv6 - 6033 laptop cl - S/N [under the direction of personal information]

  WITH WIN7PRO 32 BIT. There are 3 pilots missing in Device Manager

  that I can't locate

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1658103C & REV_04

  SM BUS CONTROLLER

  PCI\VEN_8086 & DEV_1C22 & SUBSYS_1658103C & REV_04

  and unknown device

  ACPI\HPQ0004

  All of them with yellow exclamation mark, could you please help me?

  I have mod... helpless

  Thank you

  Hello:

  You have the power of the forum on your side...

  Here are links to the drivers you need.

  First install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102010-1&cc=us&DLC=en&LC=en&OS=4063&product=5078423&sw_lang=

  PCI\VEN_8086 & DEV_1C3A:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-101536-1&cc=us&DLC=en&LC=en&OS=4063&product=5078423&sw_lang=

  Unknown device:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96119-1&cc=us&DLC=en&LC=en&OS=4062&product=5118672&sw_lang=

• Missing J4680 Device Manager - cannot scan

  I had to reinstall my J4680.  But now, I don't see where I can choose the functionality of the PC analysis.   It only shows the printer.  Am I missing a Device Manager?   Where can I find?

  I downloaded the Dominican Republic and all is well.   But when I click on the printer I don't have the option to Scan, he just tells me what is printing.

  I just find HP program.    Thank you

• HP mini 110: cannot use my wifi as it currently disabled from Device Manager according to assistant Wifi

  My system is asking for me to insert an artheros wireless adapter and I installed all the drivers, but my WIFI isint working again and when I downloaded assistant wifi it shows that he is disabled from Device Manager that i have tried everything I could give.

  pls kindly help.

  Here is the my system informatiom

  HP Mini 110-1160SA PC

  Best regards.

  Hello:

  I think that you need this card driver wireless for your 110-1160sa.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp44923.exe

• HP OFFICE NETWORK CONTROLLER MISSING IN DEVICE MANAGER

  I can't connect to the wi - fi network because the network controller is missing in Device Manager. Please help with link where I can download the right software to. My hardware ID as it is in Device Manager - Properties - Hardware ID is

  PCI\VEN_1814 & DEV_3060 & SUBSYS_3C041186 & REV_00
  PCI\VEN_1814 & DEV_3060 & SUBSYS_3C041186
  PCI\VEN_1814 & DEV_3060 & CC_028000
  PCI\VEN_1814 & DEV_3060 & CC_0280

  Please I need help fast.

  Thank you

  Hello

  the drivers are here.

  You don't specify what operating system is installed.

  Is a HP 500 b, your desktop PC?

  Best regards

  ERICO

• HP p077tx: missing in Device Manager Wifi adapter

  I have a HP p077tx laptop and it is under warranty.

  As for 2 months I have problems with wifi as my wifi adapter used will be unavailable after that I woke up my laptop from sleep. I mean the wifi was not simply disconnected, but there was no adpater wifi under the Device Manager list. Once I chose scan for hardware changes generally used to be back again.

  But last Wednesday, there just no and now it is gone forever. Tried rebooting several times which did not help of course.

  I thought the system restore using the windows system restore to a date before I had this problem. However, as the laptop starts again wifi was back and works normally as it used to. I have never put my laptop to sleep but just turned off. Next morning the wifi always worked and I thought that the problem has been resolved, but it was only before I put my phone back to sleep and later, he was gone.

  I also tried to remove the drivers installed for it programs and features, but it does not allow me to uninstall them and jumped an error saying that it cannot be deleted. \update 65.

  There is no option to uninstall the driver from Device Manager, as I said is not even appear in the list.

  So I tried to reset the laptop and it's same thing happened for a restoration of the system. After putting the laptop on standby it wasn't everything again.

  Help, please.

  Hello @ManjrekarOm,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!  I see that the problem seems to be related to when the laptop returns from Sleep Mode.

  First of all, try to review the following document and let me know how it goes:

  HP PC - Troubleshooting wireless network and Internet (Windows 10)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Sections stock scanner & printer preference is missing from the Solutions Center

  I just bought a 6510 Photosmart e-all-in-one. I had no problem setting up on my laptop and set it up easily on an old desktop PC. However, I noticed in the center of HP Solutions on the laptop that two sections are missing from this - Actions "Scan" and "Printer Preferences". The only sections appearing on the page of the laptop are connected solutions, commercial Web resources, help & Support, then disclosures of personal information. However, the missing sections both appear on center of my Solutions desktop PC. How can I get they appear on Solutions Center the laptop?

  The Solutions Center I want to talk about is the page that appears when I click on all programs / HP / series Photosmart HP 6510 / HP Photosmart 6510 series or the icon of the printer.

  Desktop PC - Windows 7 Professional (32-bit)

  Laptop - Windows 7 Home Premium (64-bit)

  EDIT: I completely rewrote this post, including the title I used the terminology wrong so I hope that makes more sense now and I can get an answer to my problem. Maybe even an expert!

  Apologies in advance to the moderators if I did the wrong thing by rewriting, sorry.

  Due to a lot of things in my life I never had to call HP. However yesterday I did something stupid and had to reformat my hard drive. As a result, I had a clean slate to work with, and last night I was finally able to install the missing stock Scanner and Printer preferences. What I noticed during installation this time, was that I had an additional question that I could choose to install from the full functionality driver, called Smart something thing-or-other (sorry, can't remember title), which certainly is not in the list before (this is the same list that includes HP Photo Creations). I don't know why that did not exist before, but maybe it could be that I installed the printer in order to deparaments of the one below. He would have just because the news about my previous printer, which I had uninstalled it, was somehow still on my PC. Was the order I completed the installation in this time - 1) go to devices and printers, add printer, click the Photosmart series 6510 with the URL contains only numbers & points, and NOT the one with http / / in front of him (which is the link to the eprint centre) 2) download the driver full features on the site of HP , launched the present and choose what to install. And voila!

• USB ports do not work. Missing in Device Manager USB controllers

  My USB ports no longer work after my computer crashed and I did a manual restart. As I go into the Device Manager the USB controller tab is absent even after I show hidden. I got no message error, nor do I see the yellow triangles. I have a gateway lx6200, 32-bit. Windows 7. system type x 86. Thank you

  Hello

  Thanks for the fast display update on the State of the question.

  Please click the link provided below which has Windows 7 drivers available for the Chipset.

  http://CA.gateway.com/GW/en/us/content/drivers-downloads

  Note:

  Please enter the model number, and then select the operating system as Windows 7 32 bit in the menu drop-down.

  Thank you.

• I lost my CD/DVD (dual drive) from Device Manager on my HP Presario using Win Vista Serv Pac 2 and IE 9.

  Recently, I replaced my hard drive of my laptop HP Presario DV 9718 with Windows Vista. It is a 4 year old laptop, but it's always a good computer. I finished all downloads for updating Windows (some 200 + GB) as well as 2 Pac Serv and IE 9. I lost my CD/DVD (dual drive) and is therefore no longer in Device Manager. Help! My system works great and I downloaded through my print online from HP.com software to complete my installation to work around the CD/DVD missing which prevernted me from the CD of the software running on my printer in my CD/DVD drive. I know it is a malfunction probably related to updates of Windows not supporting the manufacturer of my CD/DVD drive, because it can be manufactured by another company or something to that effect. Anyone have this problem and can guide me through the fix for this problem so I can go in my life and enjoy my Presario completely once more?

  Hello

  1 did you receive an error message?

  2. don't you make changes to your computer?

  I suggest you follow the link and check.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Compaq 6910p ACPI driver missing on Device Manager

  I have a compaq laptop 6910p with drivers missing ACPI on Device Manager. I tried to get a download link for Hp to solve the problem BUT nothing helped. I am using windows Xp Pro SP3

  Any person having a relationship? I'd appreciate it.

  Thank you

  Hello:

  Here is the link for the driver you need.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 3357377 & prodNameId = 3357378 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-48325-1

  Paul

• Satellite L500 - wireless network adapter is missing in Device Manager

  Hi guys, I have read a lot of discussion but not found a job of answer to my problem and yet, although this doesn't seem to be a common problem, so I was wondering if someone can help out me. Model laptop is L500-1VT. There is no switch on / off external WiFi.

  In short:
  -Awake portable sleep, already before his pan was connected to wifi, but suddenly had no connection.
  -Adapter doesn't not appear in Control Panel, so checked Device Manager. Isn't there. : S

  -Thought that maybe something has come loose? But then checked msinfo32.exe and adapter was seen here.
  -Read a lot of discussion about it being from PVAT with FCU, then followed advice doing reinstalls and uninstalling and reinstalling driver wlan (this being seen in lost msinfo32.exe.) Unfortunately, it did not work. Still not apparently visible to windows.
  -Fn + F keys never worked and after reinstall of the above programs still do not work.
  -Wireless is enabled in the bios.

  -However, and I don't know if it's the crux of the problem. * Wireless is DISABLED in HWsetup.exe. When I try to turn it on, it says reboot needed. If I do that immediately, or much later, I get a blue screen and memory dump.* so I'm sure it's a software problem.

  -J' also tried restores system and disks of microsoft repair. But I am at a loss about what to do now, so use my phone via USB WiFi to connect to MTAs.

  If anyone has any ideas, it would be great!

  Hello

  WLAN works when you restart your laptop?
  Latest version of the BIOS is installed on your laptop satellite?
  Have you tried updating the BIOS too?

  And Yes, last question: do you use the original OS that you got with your laptop (recovery image)?