XP to win 7 xp connection

Similar Questions

• new computer win 7 pro connected to ext HD or flash drive does not display any permission or not available

  Two hp 17-inch workstations mobile (business) Z book 17

  On consumer laptops, I can view the files on my external hard drive 1 to and 1 GB player.

  On these corporate work stations (mobile), I'm not able to view the files on the hard drive or flash drive.

  I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

  These are the pop ups that appear for each when displaying of readers by opening my computer:

  When left click hard disk drive a pop up appears with the title bar: location is not available.

  H:\ is not accessible.

  Access is denied.

  Make a right click on the hard drive allows opening of the FreeAgent GoFlex drive (H properties)

  The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

  By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

  I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

  I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

  Then I went to the flash drive.

  Left click on the flash drive produces a pop-up with title bar G:\

  You don't have permission to access this folder.

  Click on continue to get permanent access to this folder.

  After clicking on continue it opens another pop-up with title bar G:\

  You have been denied permission to access this folder.

  To access this folder, you will need to use the Security tab.

  When clicking on the Security tab he opens a new pop with the title bar: removable disk (G properties)

  The tabs are general, tools, hardware, sharing, ReadyBoost, customize

  He did not indicate what to do next.

  Summary:

  Two new computers hp zbook stations mobile work with win 7 pro

  Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

  The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

  How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

  I have so far done the following:

  (1) run administrative guest with sfc/scannow and it found no violations of integrity

  (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

  (3) contacted HP support

  (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

  (5) updated drivers using HP support assistant on each computer

  (6) windows update the device HP support assistant on each computer

  How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

  How can I access my files on the external hard disk and flash the mobile workstation book z?

  The specifications for the mobile workstation of zbook are:

  Operating system: Windows 7 Professional 64-bit Service Pack 1

  Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

  Moemory system: 16 GB of memory on 2 1600 MHz dimm

  Graphics device 1: Nvidia Quadro K3100M

  Graphics device 2: Intel HD 4600 graphics card

  Hard drive 1: SCSI Disk Device

  C: 683.42 (613,62 free go-go)

  D: 12.21 GB (1,3 GB free)

  E: 1.99 GB (1.97 GB free)

  The hard drive is a seagate 1 TB drive that works very well

  The flash drive is a 1 GB drive which works very well

  Here is the new mobile workstations HP Z book 17.

  Microsoft said that HP is responsible for the operation of win 7 in the first year for the operating systems pre-installed

  HP elite support doesn't know how to solve the problem with the USB ports on the two books of Z is not able to provide access to external hard drives or flash drives

  These two mobile workstations have problems of USB port with all the ports on each computer?

  These two mobile workstations have problems of windows 7 where the client has to learn how to use the registry to store external hard drives internal hard drives?

  What does do to be able to back up files on a disk external hard drive internal?

  Have to do to be able to use flash dirves with a 17 mobile workstation z book?

  This problem has been resolved.

  The book of Z 17 HP installed their software: HP Client Security.

  This software prevents the use of external hard drives and flash drives in its default settings.

  Each customer is on their own in discoverinv and the resolution of this problem.

  There is no warning.   He made no information on why a right click on a drive and checking the property do not work.

  The way in which this issue has been resolved was by a clean boot process in msconfig.

  When miscrosoft services were hidden items that remained were read.  Systematically, some were checked and unchecked, and the computer has rebooted to see if the problem was still in existence or if the problem has disappeared.

  Whenever the hard drive or flash drive has been verified.

  We were lucky that we checked to see if it was or not HP software at the beginning.  This problem was caused by the default client security HP who were to refuse all USB connections.

  This consumes a lot of time and was so frustrating.

  On the first book of HP Z 17 thin client HP security biometric authertication failed with a black screen.  The computer is about 15 days old.    All the dirvers for the HP notebook have been uploaded and then the software for biometric devices have been downloaded.  HP determined that it was a hardware failure of the biometric device, when drivers and software downloads together has not fixed the problem.  This computer had / has the same problem with not allowing communication with any external hard drive or flash drive.

  HP did wrong by not providing any information on the inside of this product the HP support assistant.

  Here's a consumer might encounter problems:

  The HP support assistant on Z book provides updates of drivers for windows, but the support phone number book mobile z is not listed.  There is a phone number, but it is a regular support, not z book mobile support or elite support.  Mobile Z book users are supposed to call the number fo elite press and the number is for a regular support on the wizard of book z mobile support.  Support assistant has cat support method and the HP chat support is not trained to book support z mobile.  There is a feature to contact the technical support and the transfer of data to the technician, and again, it goes to regular support who is not trained to support the mobile z book.  If you call the phone number provided some of the choices on the automated line includes desktop, laptop and office work.  If you choose Notepad you won't get z mobile workstation support.  If you choose work center you will get no support of z book mobile workstation.  Instead, you must have someone answer and then ask to be redirect to support elite.  On the first call, you never know that the support you are looking for is elite support until they give you this information on the next contact.

  After many hours spent barely pull on the problems of not being able to view files on an external hard drive or external dirve flash, I was able to change this HP software.  It now unfortunately produces a humming noise when parts of it are displayed.  This has not yet been set.

  It is the customer of HP security information:
  
  http://www.HP-ProtectTools.com/downloads/PDF/HP_ProtectTools__EnterpriseDeviceAccessManager_Whitepaper.PDF

  There was no information to reconfigure the software in the white paper.

  I was able to find a user guide.

  This guide was not and was not available through the HP support assistant:

  http://h10032.www1.HP.com/CTG/manual/c02292692.PDF

  Hope this helps all who are unable to view the files on their external hard drives and external flash drives.

  The thin client HP security prevents click right change of ownership and prevent changes, right-click in the security, etc..  Change of Director fails also as the client security administrator HP overides too.

  So end users must change the HP Thin Client Security so that it does not block access to files on external hard drives or flash drives.

• 3055A - Win 7 wireless connection fails

  Having bought a new printer 3055A few days ago I am facing a problem, I can not solve: whenever the cumputer is stopped and restarted it loses the connection to the printer. The connection between the printer and the router seems well, but the printer is not visible to the operating system (Win 7).

  Troubleshooting software of HP is nothing but requiring a re-install every day, and the link to the HP support in troubleshooting software does not work, so this forum seems to be the only option for support.

  Does anyone have a solution to this before returning the printer for a refund?

  Talyinka,

  I'm sorry you have a problem with your connection to your printer. So it will reconnect to this IP address when the system reboots, I would like to put a static IP address.

  Here's how

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  I hope this helps

• Win 7 cannot connect to internet, found wireless & LAN network but cannot access the internet.

  I've updated my laptop lenovo Y430 to Windows 7 Home Premium about 6 months ago, it has been working fine until last week, I just can't connect to the internet more. I used to use a wireless network, now it says that it is connected to the network, but 'no internet access', while the signal says it's just. I also try to always use the Wired internet, not luck, and worse yet, he says no 'identified Network/No access to the Internet.

  "I have troubleshooted, that is the message he gave me: 'Connection to the Local network' is not a valid IP Configuration.

  I run 'ipconfig' cmd and this is what gives me:

  C:\Windows\System32>ipconfig

  Windows IP configuration

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  Link-local IPv6 Address...: fe80::e99e:3f78:35 c 3:7056 %11
  Autoconfiguration IPv4 address. . : 169.254.112.86
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :

  C:\Windows\System32 >

  and I've run ' ipconfig/all', that's what I got:

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: salt - PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Intel(r) WiFi Link 5100 AGN
  Physical address.... : 00-16-EA-DC-69-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1E-EC-96-77-04
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::e99e:3f78:35c3:7056% 11 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.112.86 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 234888940
  DHCPv6 DUID customer...: 00-01-00-01-10-38-1C-FD-00-1E-EC-61-19-2C

  DNS servers...: 85.255.112.123
  85.255.112.234
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {B10AA6ED-FDE1-4A0B-A968-3E7DB87E4CCF}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {F438E2F9-36AA-4DE2-8BAB-4A72511B70D2}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Please answer asap, HELP!

  Thank you.

  Sincerely,

  Evan

  

  Yes.

  Routers and switches are different types of network devices.  Routers are "smart".  Switches direct network traffic between computers on a single network, while routers can act as the interface between two networks (for example, the Internet and your Local network). There are many explanatory pages on the Internet about it. Here'sa .

  Actually, most "routers" sold for home use today incorporate both a switch and a router (and in the case of "wireless routers" also incorporate a wireless access point). Routers include usually a (NAT ) network address translator, also a DHCP Dynamic Host Configuration Protocol (), a proxy of domain name Service (DNS) server, and a hardware firewall to protect the local network from malicious intrusion on the Internet.

  Your provider of Internet service through your cable modem, "sees" the WAN port of the router, as a computer (which is) generally configured to automatically obtain its IP address.  The ISP's DHCP server assigns this port the only IP address that is allowed to you.  It is an 'external' or 'public' IP address, and this is the address that other computers elsewhere on the Internet use when they drive traffic to you.

  The router's built-in DHCP server assigns 'private' IP addresses for each of the computers connected to TI (no matter if they are connected by wire or wireless).  As a general rule, these are of the form 192.168.1.x or 192.168.0.x, where x goes from 1 to 254.  These IP addresses are not 'seen' by computers on the Internet.  Instead, the feature NAT on the router directs traffic to your public IP address to the correct of your internal computers (and vice versa).

  A switch can't do it all.  If your authorized service provider, you can connect to your switch directly to your modem and the ISP's DHCP server assign an IP address publicseparate to each computer connected to the switch.  Because your ISP does not allow more than one public IP address from your account, its DHCP server assigns such address to the first computer he sees connected to the switch.  If several computers are then connected to the switch, the ISP's DHCP server simply ignores them: too bad, computer #2, you do not get an address, and so you can't connect to the Internet.

• Windows Server 2008 R2 with various OS Win interrupted network connections

  Not a question, but a finding:

  Shortly after the upgrade to Kaspersky Endpoint Protection 8, I started to have problems with seemingly random work stations in my area, the loss of their connection to one or the other of my boxes of Windows Server 2008 R2.  Some of the workstations XP SP3, some Win 7 - two BONES have been affected.  The breakdown of connectivity went both ways - the server could not see the workstation and vice versa.  Sometimes if I waited about an hour, the workstation could re-establish his connection spontaneously, but usually I have to change the IP address of the workstation.  Doing so systematically restored the connection.  Release and renew for workstations using DHCP didn't work because they always had the same new IP - address should change to restore the connection.  After a process of exhaustive and exhausting trial and error to determine the cause of this problem (I initially make the connection between the upgrade of Endpoint Protection and this question), I finally determined that the network attack blocker component was causing this problem.  I disabled this component during my assignment and did not have connectivity losses in the three months that I got that off item.  I also had a case when after the reactivation of network attack blocker, I got a workstation loses its connection to one of the servers, and after disabling the network trainer attack once again, work stations that had lost its connection almost immediately restored the connection itself.  So, if you are having this problem and use Kaspersky Endpoint Protection 8, disable the network attack blocker component.

  Hello

  Glad to know that you were able to solve the problem. Your efforts to solve this problem is appreciated.

  You can also publish your solution or results in Windows Server 2008 R2 TechNet forums: http://technet.microsoft.com/en-us/windowsserver/bb310558

  Thank you.

• Comments Win XP cannot connect to the network when Cisco VPN works on Mac

  Guest OS (Win XP) on the merger connects to the network, no problem. However, when I start a Cisco VPN on my Mac (not in the guest operating system) and then start Fusion/guest OS, the guest cannot connect to the network.

  I was able to use this configuration for a year on an old MacBook Pro (unibody). Last month, I got a new MacBook Pro and flying over my virtual machine image. I don't check for a few weeks. I'm sure I fly over the image correctly because everything else seems OK or if the IT guys doing something to block my traffic over the VPN.

  Config

  -Fusion - Version 3.1.0 (261 058)

  -Mac - 10.6.4

  So far, I have tried the following

  -started to merge and XP without VPN on Mac - OK (bridge autodetect)

  -launched VPN to work, and then launched Fusion - no network

  -tried ipconfig/release, ipconfig / renew - not always no network

  -tried NAT - do always no network

  Thanks in advance. For any help or suggestion will be greatly appreciated.

  Bernie

  The NAT value and then restart the virtual machine.  Works for me with the VPN client built into a cisco router.

  Do not work the real on 10.6.4 cisco software unless you really need to.

• HP Pavilion with Win 10 - cannot connect to the network

  Hello

  I have a HP Pavilion (M2N68 - THE motherbaord) the computer has been upgraded to windows 10 and working fine but something happened and I have no access to the network. Under control panel / network connection, I have a grayed on "Boardband Connection" icon and a "connection to the Local network' who says"network cable unplugged. " Player in an eathernet cable has no effect.

  I also checked in the Device Manager and there is no warning or errors.

  Normally I would check and updated the motherbaord drivers but the original drivers for this PC model are supported only up to Windows 7.

  I don't know that that then check. Please help me ill take what I have to do to re - connect my desktop to my network.

  Thank you

  _Asher

  Hi there @AsherE,

  I hope you find your experience of positive Support Forum!  I understand that you are having problems with any type of network connection to your computer. I'm happy to help you with this.

  Please report the number of complete product for your computer. Check out the following, if you need assistance with this information. HP desktop PC - how can I find my model number, serial number or product?

  When you plug an Ethernet cable, is there a clear link on the LAN adapter and/or the activity light flashing?

  Have you tried another port on the router?

  Are able to connect to your router using another device cable connection or WiFi connection?

  Have you tried another Ethernet cable?

  A power cycle you the router?

  Please let me know when you can.

• Win 7 USB connection problem disconnect/connect Cycl

  Is anyone else having problems with their Droid Turbo and a Win7 PC connection? I got my first camera at the end of November. When I initially plugged on my PC, the AutoPlay of Windows kept popping up window and the device would be cycle as if it had been disconnected. The AutoPlay window closes never alone, and I need to close from a few to several 10s of windows (based on how long I left it plugged in).

  I was able to get a stable connection after installing the Motorola Device Manager software.

  After a problem without report, Verizon has replaced the original phone with a new phone. The new phone is the same cycle of disconnection/reconnection anytime it is plugged. Software Motorola device Managger says that the software is up to date.

  I connected the phone to a Linux computer and had no problem copying files back. The connection is remained established until I got the USB cable.

  I rebooted the phone and the PC several times that I care to count.

  Also has anyone seen this problem? More importanly, does anyone have a solution?

  My phone (in MTP mode, without debugging) shows that the VIDID 22 b 8: 2ea4. On several occasions, I saw the PID also be 2ea5 and 2ea8. (Maybe it's with debugging on, perhaps a PTP mode).

  A few times, the device is presented as "Unknown device" with no details in the Device Manager.

  I plugged the phone in each USB port on the computer.

  If I knew that the files to remove from Windows to replace the driver I'd do it. If I knew that the right driver I tell Windows to use. So far I have not found one that works.

  Thank you

  James

  James best would be to connect the device in MTP, USB OFF debug mode. In Device Manager, locate the device and click on uninstall. At the prompt to uninstall to make sure that you CHECK DELETE the driver software. Uninstall device of motorcycle, bike mobility Manager drivers and nothing of another "bike Mobility" brand. I use a disc cleaner (ccleaner) delete left over remnants of uninstalled product files. I first do a system cache/clean and repeat several times until the cache gets up, nothing to remove. After that it's over, I run the registry cleaner. After scanning, select "Questions of difficulty" to the quick click reg backup YES, choose a SAFE place 'FIX ALL '. Once done, repeat until there are no more problems found. After all this is finished, STOP, do not restart. Computer to start up, run CCleaner again just to make sure everything is clean, so before you plug in your phone, go to and install Motorola Device Manager/USB Drivers. Let the full install and reboot. In developer options, revoke the authorization of debugging. Connect the phone in MTP mode to the PC and let Win7 to install the drivers. Change the connection of the device to PTP repeat, then finally change device USB debugging and let windows install the drivers. Let us know if this helped or hurt.

• Task Scheduler, Win Server 2008 - connected or not 2147942403 error

  I created a task scheduler with the Security Option to "run if the user is logged in or not."  But he fails even though I am connected with an error value: 2147942403.  If I change the Sec Opt to "Run only when the user is connected", the task will run flawless.

  I am a user (not administrator) on a Windows Server 2008.  The user name & pass are configured correctly.  Is that my Admin has to do to fix this?

  Hey Kevin,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

  TechNet Windows Server general Forum

• Win XP and Win 7 cannot connect - Microsoft tracing statements

  I have a network with four computers, two running Win 7 and two running Win XP. Two Win 7 machines can see and share files, and two XP machines can see and share files. But the XP and 7 machines do not see each other. I followed the tutorials Microsoft and read all the posts and all the tech articles I can find, but nothing helped.

  • All the machines are on the same workgroup
  • If I turn off the firewall, the problem persists
  • I have the same user accounts and passwords on all machines
  • All computers all computers very well, I can PING

  On Win7 machines:

  • Discovery Network is running
  • Network location is Home Network
  • The Link-Layer Topology Discovery Mapper i/o Driver and Link-Layer Topology Discovery responder are both enabled
  • Protected by password sharing is disabled
  • File sharing and printer is enabled
  • Public folder sharing is turned on
  • Is not part of a homegroup

  On Win XP machines:

  • File sharing and printer is enabled
  • The same group work like machines Win 7
  • Run the Network Setup Wizard and follow the instructions in Microsoft

  Any help is appreciated. It cost me a lot of hours so far.

  Thank you.

  I hope that you don't mind chiseling.  Like you, I also spent a lot of time at the stage of the RIP-my-hair-out during a sort on my network.

  While my a Win7 & a WinXP without router network is much simpler than the one you are working on, maybe check the measurements I took & settings I've done may highlight gaps in your configuration.

  A procedure step by step for the creation of an Ethernet cable to both computers between Windows 7 and Windows XP with ICS

  Like you, I had to trawl through a large amount of material to gather the instructions for setting this up.  Not all of this seemed to be in line or even logical.

  I used these instructions three times when setting up my network, and it has worked every time [when in the development of the procedure, once for real & and then to help me make sure that I had written the instructions properly - I have a surprisingly naïve faith in the ability of my system, images to get back to square one after these experiences].  At least another user of the forum has also reported success with the procedure.  My Network continued to work properly without any extra setting since the beginning of last year.

  I understand that you also the router to consider, but I think that will affect only the required IS & DNS parameters.  I think that the rest of the procedure will be on your network type as well.

  If the procedure help you, maybe you could then consider publishing your final version somewhere in this forum to help other users.  You can cut & paste my version as much as you want.  Please keep the acknowledgement of receipt of the opinion of Steve Winograd as it has filled in the gaps that were not resolved anywhere else.

  Good luck

• 8 win fails to connect to the Agent to install all the Windows user

  Hello

  When I start Windows 8 I get a box saying cannot connect to a windows service. Windows all users install the agent service. Event ID 7000. If I'm on online help link I get "page not found". The result from my point of view is that I don't seem to be able to install updates for all programs. Windows updates crashes and PSI download updates but hangs when it comes to installation. I don't really want to reload Windows I'll lose all my 3rd party software and it takes an age to recharge. I had to do it about eight times since I got Windows 8 (7 months). Can anyone suggest a solution please. I'm reasonably computer literate, but I do not understand about the permissions etc. Ive tried to attach a copy of the event log details.

  Thank you

  Save the details below.

  +

  System

  -

  Provider of

  [Name]

  Service Control Manager

  [Guid]

  {555908d1-a6d7-4695-8e1e-26931d2012f4}

  [EventSourceName]

  Service Control Manager

  -

  Event ID

  7000

  [Qualification]

  49152

  Version

  0

  Level

  2

  Task

  0

  OpCode

  0

  Keywords

  0 x 8080000000000000

  -

  TimeCreated

  [SystemTime]

  2013 06-21 T 16: 35:28.673941600Z

  EventRecordID

  33066

  Correlation

  -

  Execution of

  [ProcessID]

  812

  [ThreadID]

  6004

  Channel

  System

  Computer

  SatP850

  Security

  -

  EventData

  param1

  Application experience

  param2

  % 1053

  410065004C006F006F006B00750070005300760063000000

  Binary data:

  In the words

  0000: 00650041 006F004C 006B006F 00700075

  0008: 00760053 00000063

  In bytes

  0000: 41 00 65 00 4 00 6F 00 A.e.L.o.

  0008: 6F 00 6 b 00 75 00 70 00 o.k.u.p.

  0010: 53 00 76 00 63 00 00 00 S.v.c....

  I do not know...

  I've seen some say that they did not have this file, and simply adding the folder fixed their problems.   Look and see if the following folder exists, otherwise create a new folder;

  AUInstallAgent C:\Windows\

  May be also here;

  http://batcmd.com/Windows/8/services/alluserinstallagent/

• Win 7 - password connection not working-no CD drive

  First I got the message that the user accounts were corrupt.  Then, as if by magic, I got is more this message, instead he now does not recognize the password I had for my own account or for the administrator account.  I have not forgotten them--they simply don't work anymore.  I have the discs, but my hand-dandy tablet doesn't have a CD player.  I copied the recovery disc (which came with my Tablet) on a data key, but have no way to start loading without being able to tell him.

  Please help me - I have tried the F8 trick, but I guess that my keyboard is not fast enough, or I'm not, or something.  Could not get the safe mode.

  Suggestions?

  You can do this:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your flash diskrepair system. You will need to create this flash drive on another machine that works in Windows 7, using the same as yours (32 or 64-bit) bus width.
  3. Press a key when prompted to boot from the CD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when he worked as it should.

• Win 7: Wifi connection appears on the taskbar (notification of wifi icon) but not in the "network and sharing Center."

  Win7: Running "netsh wlan show network" will list it but I can't export its profile by name. I get an error "profile is not found." The command even on other profiles correctly exports in xml format. It has a hyphen in the name, it is of any consequence. It is a * open * guest account that I created and which should be deleted. How can I remove it? TIA.

  Hello

  Please see the link:

  http://TechNet.Microsoft.com/en-us/library/cc755301 (v = ws.10) .aspx

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

• Satelitte L50-B-1DZ: BT is paired but does not connect to the android device

  I just bought a new toshiba brand laptop with win 8.1
  Satelitte L50-B-1DZ I got bluetooth on
  And have even added and paired 3 devices to this Sucsesfully.
  Tab after assend 300Y android android phone and a samsun Music Center.

  The bluetooth connects very well with the Music Center.
  But not with the phone android or tab
  It will not just connect, I checked the phone and the tab are visible etc.

  I hear a lot of rumors of 8.1 problems
  With drivers who have improved 8 etc.
  I managed to do a check of device driver
  Manager and he said the best up to date
  Are installed.

  But I want to be playing so deep in this
  Bought a brand new laptop with windows 8.1
  Is it worth to take back to pc world a tell / show them
  The pronlem for them to market.
  Because they will be more IT his life than me.
  Does anyone else have this problem?
  Is it something android?
  I am due a new phone soon I could poss
  Get a windows a next if this will connect?

  Thanks nikki

  Hello

  Check it please my thread on the BT feature. I tested it with my phone android mobile.

  Please test the functionality of BT send some files in both sense, even if the mobile phone is crystallized in Win as not connected.

• can you neighbours usen your wireless connection?

  I noticed that the names I know what some appear as network on my PC

  Yes, if your wireless connection is not protected password

  You don't mention the version of win, but when connecting to a wireless network, it would show all the connections that are found, some will have a lock symbol (that is to say that they are protected by Word)