XPS 18 with monitors P2414H double

Similar Questions

• 3 monitors on XPS 8700 with AMD Radeon HD 270 R9

  Hello world

  Just a quick question. Can I conduct 3 monitors to a XPS 8700 with the AMD Radeon HD R9 270 card?

  I read somewhere that it supports Eyefinity, and in the marketing of the images I see 3 ports on the video card. an hdmi and a DVI and a VGA. Eyefinity normally uses an active displayport adapter. You don't know everything just not if I'll be able to use all 3 ports to control monitors. Or maybe use 2 ports from the dedicated card and the onboard port.

  Thanks in advance for any help!

  Steve

  I've never tested, but in theory, it should work.

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

• XPS 8300 with AMD HD 6770 white video between 5 and 15 minutes after connection.

  I have a XPS with AMD HD 6770 and ST2320L monitor 8300.

  The system has no hard disk formatted, so I can not only boot and use the keys F12 menu to load from CD or run the program Setup or diagnostics menus to investigate this problem.

  If I boot from the DVD (System, norton bootable recovery tool restore disc), run diagnostics, or just leave the computer in the installation menu screen will go blank and enter the power saving mode about 10 minutes later. (Diagnosis show no error if executed until the screen turns)

  I'm sure that the computer is running once again the white of the screen as caps lock / cd eject all still work but I can not answer of the screen.

  I guess to a graphics card problem but overheating seems unlikely it has worked well for a year and restarts immediately after power turn off / turn on.  Display is lost on the monitor and a HDMI TV connection so improbable it is associated with monitor.

  There is no hard drive formatted as I was trying to convert from RAID to a single HARD disk after a disk failure, and only 15 minutes before the white of the screen it is not time to complete the restoration of the etc system! I do not see this pertaining to the issue of the display, but of course I had the box to open then could have dropped something on the inside. I reinstalled the card / cable...

  Welcome any tool or ideas useful coming to DVD bootable - next action is to try another video card when I can get one in a few days.

  Thank you

  In case someone else has a similar problem the solution replaced the video card.

• U2412M, new XPS 8600 DVI monitor does not

  XPS 8600 with AMD 7500 series (an HDMI and a DVI output) video card.  The monitor is dead and does not illuminate.  Drop shipped a new Dell today and at least this monitor turns on (the led lights).  Connect DVI to DVI results in the error 'no signal' on the screen despite checking the entry in the menu monitor DVI...  If I use an old VGA cable with an adapter DVI of the computer that connects to the VGA port on the new monitor, there is no problem. So is the DVI cable, a problem with DVI-d port on the 'new' screen, or something else?

  Thus, the new monitor came today and push the pedal using the existing cables, video card, etc. without incident.  The problem was with the refurbished monitor Dell sent in replacement.  Although I am happy that the incident is resolved, it took way too much troubleshooting and perhaps Dell should place stricter requirements on the "refurbished" products, they sent.

• can Apple Watch connect with monitor polar heart

  can Apple Watch connect with monitor polar heart?

  Hello

  If you are referring to the H7 polar, then Yes, we can.

  Firstly turn off pairing the monitor from other devices which he may previously have paired with (for example your iPhone), then:

  • Wear the polar H7 (which lights up by being broken to the strap and rotates when detached).
  • On Apple Watch, go to settings > Bluetooth.
  • Wait that Polar H7 appears, then press it.

• P7 - 1108p with monitor s2031 Ont. Best obtained resolution is 1270 X 720.

  Windows 7 Home premium.

  P7 - 1108p with monitor s2031 Ont. Best obtained resolution is 1270 X 720. Had to install the drivers for the monitor of

  Finally, get that. Also downloaded new graphics drivers. Still getting only 1270 X 720.

  Any suggestions on how I can force the video at a resolution of 1600 X 900.

  Solved my problem. Has proved to be the digital cable. I wonder if this could be the problem

  with some of the other problems, monitor the Forum.

• HP dv5 does not start with monitor plugged

  Hello

  I have a HP Pavilion dv5 1130ea. I have an external monitor that I use as a second screen. However, this week yet he refuses to start when I plug in the monitor, it keeps cycling of the boot sequence prior (I don't get the option to press ESC to see a menu). If I plug it after it is initialized in this will work, but it will not correctly identify the monitor and I can't make it work with the correct screen resolution.

  Since these two problems are associated with monitor and appeared at the same time, I assume that they are related.

  I am running Windows 7, but since it won't even be the bios (or what is called the replacement of HP) I don't know it's relevance.

  Thank you

  David

  OK, solved the problem, it was not the laptop, it is the monitor.

• Vista Service pack 2 install problem on Dell XPS M1330 with SSD hard drive

  Hello

  I have a DELL XPS M1330 with Solid State SDD drive. None of the solutions have solved my installation problem including run all the tools to clean up the intall. It restarts after installation, then crosses the restart process, then the States 'installation failed' and then back again.
  Vista Ultimate 32 bit, 24 GHz chip. Nothing else cannot simply install service pack 2.

  Thanks in advance for your help

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  =============================

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Clarity on a Dell XPS 8700 with 2 TB SATA + Intel® SRT 32 GB SSD Cache harddrive

  Hello

  I am buying a Dell XPS 8700 with a SATA hard drive with a 32 GB SSD cache. I want to know if the SSD is a separate physical disk SATA hard disk, it will be the M.SATA chip on the motherboard.

  Please it is confirmed; I can by adding a larger 256 GB internal SSD, with the o/s re installed on the SSD with HDD as storage of 2 TB.

  Best regards & Thanks Sean

  Hi Sean,.

  Yes, it's an mSATA SSD and scalable. You have the option to install the OS on a bigger mSATA SSD if you choose to do.

• Dell Inspiron 3647 with monitor Samsung

  The Samsung S27D390H monitor does not seem to get along with my new Dell Inspiron 3647 system, bought at the same time for the system.

  Sometimes, the screen is black and will not respond when I turn it on.  Dell said that not all monitors are compatible with their systems, if they would not comment specifically on this monitor.  Together, they said is why not to buy a Dell monitor.

  It could be a 10 Windows sleep problem or a problem of monitor or computer hardware.  Dell tells me about the monitor because it is not a Dell monitor. Microsoft won't talk about the problems of sleep with Windows 10 because I bought the system from Dell with Windows 10 on it so Microsoft says that I must deal with Dell. I spent an hour and a half on the phone with Dell, struggling to understand the accent of the person I was talking about. It was exhausting and frustrating but no help. I'd stick rather pins in my eyes!

  So we plugged the monitor into a power strip and turn off the power strip. So far that has worked, but the problem is intermittent, then it will be some time before we are confident.

  Reference verified Dell Bios version.  All standby/hibernation settings have been checked and turned off by Dell.  Not sure about sleep of the BIOS.  Don't know what your last question.

  Been another incident.  Off the monitor with monitor power switch.  Half an hour later turn on monitor power switch.  Black screen.  Waving the mouse.  Typical exhaust.  Hit Ctrl Alt Delete.  Nothing.  Turn off the power strip and he turned his back.  Picture came back on the monitor.  And it showed on the screen Ctrl Alt Del orange asking what I wanted to do.

  But really, I'm fine with the solution of power strip.  It's simple and it works.

  Thank you all

• Add SSD to the Studio XPS 8100 with 2 HARD drive

  Hello

  I have a request similar to this one in this thread: http://en.community.dell.com/support-forums/disk-drives/f/3534/p/19499585/20334228.aspx#20334228 but I went a little lower on the line, need some advice and help on the Intel Rapid Storage Technology controller.

  I have a Dell Studio XPS 8100 with discs of Segate to 2 x 1 TB which have stripes.

  Configuration is SATA 1 + 2 = hard disks scratched; 3 = BluRay ROM/DVD RW SATA; SATA 4 = not used.

  I bought a Samsung SSD 840 series.

  What I want to do is add the new SSD controller and install Windows 8 without messing/breaking the existing 2 x HDD Striped Array.

  First, I installed the SSD SATA 4 and started Windows 8 to DVD but Windows 8 says it could not install on this disk because it is not bootable (SSD is not formatted/not partitioned right now but I guess that Windows 8 installation will do for me.

  If the questions are:

  (1) if I go the SSD SATA 1, could I (physically) move the existing striped 2 HDD SATA 2 and 3 and set this configuration in technology Intel Rapid Storage Technology controller without losing the striped table?  I don't want to find that the controller will set up a table of fees which then requires a fresh format in order to to use.

  (2) is there a documentation of this controller I could read on what concerns the reconfiguration/options and their effect?

  Thank you
  Chris

  I am pleased to learn that you have to work.  Sometimes I forget that the newer Dell BIOS will allow allows you to select a SATA port for the start.  My XPS 410, being an older machine, allows me only to the ability to choose 'SATA hard drive' as boot device.  Because it does not give me the option to choose a specific port, the bootable SATA drive must be attached to the first port.

  Once a RAID has been configured, the parametric data written to readers allow the RAID ROM figure out how the RAID has been configured.  I've been through all this on a Studio XPS 435 t/9000; We had a problem after adding a new video card in the system that caused startup failure, error message "one or more of your drives are locked".  We have solved by moving readers from the ports of third and fourth (or Dell originally installed them) to the ports of first and second.  Requirement to keep records in the same relative order of port, you can of course make this transition and maintain the operational computer.

  I wish that your installation does not end with an arrangement of dualboot on its own; Maybe Windows 8 works differently from Windows 7.  The XPS 410, I'm currently using is a RAID 0 which has been initially configured with Windows XP.  When I decided to try Windows 7, I has narrowed the original partition and run the Windows 7 Installer to install in the unallocated space resulting.  The installation went normally and I found myself with a system dual boot without ever having had the opportunity to indicate that I wanted a system dual boot.  Since it was my goal, I'm not complaining, but I see that it might be inconvenient for some people who had the intention like that.  Before installation, you accidentally set your SSD on port 4 to be the first in the boot order?

• How can I install my printer model Dell 720 on my new Dell XPS 8500 with windows 7

  I have the software for my Dell 720 printer, but it will not install on my new Dell XPS 8500 with windows 7.  It works fine on my Dell Dimension 3000 with windows XP.  I would use this printer with my new system

  Dell is not a Windows 7 driver for this printer.  The closest thing they have is a driver for Vista 32 bit.  So your options are to (1) Download 32-bit Vista driver and try to install in compatibility mode, (2) use XP Mode if you have the professional or Enterprise version of Windows 7 Ultimate, (3) buy another printer.

  You can download the Vista 32-bit driver

  http://www.Dell.com/support/drivers/us/en/19/product/Dell-720

  Good luck.

• createModelEntity module vCAC fail with java.lang.Double cannot be cast in java.lang.Short

  With the help of plugin vCAC (5.1) I tried to create an entity PhysicalMachine vCAC.  Couple of attributes of the entity PhysicalMachine is numeric.

  For example: to create a PhysicalMachineEntity I send you under properties map to createModelEntity

  var physicalMachineProps = {}

  PhysicalMachineID = "UUID".

  MemoryInMB = 1121,

  Processor = 2 speed,

  Name of the vendor = "Seller,"

  AssetTag = "ALEX."

  Model = "usrLbl."

  ServiceTag = "DN,"

  Location = 0

  };

  createModelEntity always fail with java.lang.Double cannot be cast as a java.lang.Short error. Rhino still get converted to java.lang.Double and its plugin failure looks like number type. How can we force type is short

  One has seen elsewhere. Appreciate any inputs on this.

  Caused by: java.lang.ClassCastException: java.lang.Double cannot be cast in java.lang.Short

  at org.odata4j.core.OSimpleObjects.create(OSimpleObjects.java:38)

  at org.odata4j.core.OProperties.simple(OProperties.java:54)

  at com.vmware.o11n.plugin.dynamicops.model.support.ODataAccessService.createSimpleProperty(ODataAccessService.java:1012)

  at com.vmware.o11n.plugin.dynamicops.model.support.ODataAccessService.populateSimpleArgument(ODataAccessService.java:934)

  at com.vmware.o11n.plugin.dynamicops.model.support.ODataAccessService.saveEntity(ODataAccessService.java:843)

  at com.vmware.o11n.plugin.dynamicops.model.EntityManager.createModelEntity(EntityManager.java:53)

  to com.vmware.o11n.plugin.dynamicops.model.EntityManager$ $FastClassByCGLIB$ $5bb4b803.invoke (< generated >)

  at net.sf.cglib.proxy.MethodProxy.invoke(MethodProxy.java:149)

  to org.springframework.aop.framework.Cglib2AopProxy$ CglibMethodInvocation.invokeJoinpoint (Cglib2AopProxy.java:689)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:150)

  to com.vmware.o11n.plugin.sdk.spring.impl.CurrentFactoryAnnotationAdvisor$ 1.call(CurrentFactoryAnnotationAdvisor.java:71)

  at com.vmware.o11n.plugin.sdk.spring.AbstractSpringPluginFactory.doInCurrent(AbstractSpringPluginFactory.java:193)

  at com.vmware.o11n.plugin.sdk.spring.impl.CurrentFactoryAnnotationAdvisor.invoke(CurrentFactoryAnnotationAdvisor.java:67)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:172)

  to org.springframework.aop.framework.Cglib2AopProxy$ DynamicAdvisedInterceptor.intercept (Cglib2AopProxy.java:622)

  to com.vmware.o11n.plugin.dynamicops.model.EntityManager$ $EnhancerByCGLIB$ $93e675fa.createModelEntity (< generated >)

  Thank you, open a support request. For now, workaround is to remove the attribute properties Slot, then I was able to create the PhysicalMachine entity. But there may be other entities with Int16

• Mac pro with monitor Dell P2414H book: how to rotate the image displayed in mode portrait when I rotate the monitor 90 degrees

  I have a mac book pro retina bought in 2014 which I use with a Dell P2414H monitor.

  I bought this monitor because it can turn up to the vertical position ('portrait'), but when I do that the image of the screen does not turn with it.

  I called Dell and they said that it is a problem to solve with Apple.

  Does anyone else have this problem? and it got fixed?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.