XPS 210 operating system loading

Similar Questions

• recovery system option - not found any operating system, load drivers

  Hi, Im new here ^^ I am here to ask a question, he made me feel confused. I bought a laptop last year, which is (Acer Aspire 4930 G). Today morning when I turn on my laptop, it showed me all of a sudden

  PXE - 61 - test Media Failed
  No bootable devices - insert the boot CD and press a key

  I made impossible the network startup and test media is fixed. After that, I started using VISTA HOME PREMIUM recover CD and tried to fix my computer, but it seems to do the job.  These are the problems that I met

  1. once I click on "Repair my computer", it pop up a "system recovery option" forms but the operating system has not appeared and he asked me to load the drivers (not sure it takes load 1)

  2. If I continue without the operating system and I clicked on the "Startup Repair", it shows me that "cannot automatically repair withouth', is m felt confused.

  3. If I click on the "System Restore", it doesn't seem to work too.

  May I ask... How can I recover / find my operating system? and how can I solved the problem I've met? Is to make fuzzy m

  Recovey process Acer is normally a complete reinstall back to the factory settings: how you bought.

  http://support.Acer.com/

  For all questions/issues with Acer Recovery Media, contact Acer at the link above.

  It's Recovery process Acer, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop screen out of phase, only in normal when starting the operating system loaded, how to fix?

  My laptop screen guard flicking down, as if she were in phase opposition when the normal mode is responsible, when I use the modes safe, that the screen is fine and authorized to use, what can I do to fix this?

  Thank you
  Jack

  Try updating your graphics card:

  Go to the support site for your computer manufacturer and download the latest driver for your graphics card specific to your operating system (Vista 32 or 64 bit). Looking for instructions on the site of support on how to uninstall and install the driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• system will not load or repair, missing operating system loader. How to fix?

  system has not worked since the update. fault of lack of shows os loader. How can I fix the problem. ; -j

  Hi John,.

  I imagine the inconvenience that you are experiencing. I'll certainly try and help you in the matter of fixing.

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. are you referring to Windows update?

  2. What is the accurate and complete error message?

  3 have you tried the troubleshooting steps to resolve this problem?

  You can try the Startup Repair service and check if it helps. If you are not able to perform the Startup Repair, you can perform a System Restore to the date when the computer was working fine and check. (You may be prompted to insert the Windows Vista installation DVD).

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information was helpful and we provide more information if you need help. We will be happy to help you.

• BlackBerry 9550 smartphones - cannot load the operating system and a re-boot loop

  Sorry if this is going to be a long post.

  I've been running OS 428 and a hybrid (428 based) since it was leaked without a hitch. 2 weeks ago, my 9550 rebooted on its own with a JVM ERROR 534 (I think it's the code because the screen just turned white with the error message and then rebooted on its own). He never started up properly then. The boot process dates back to about 3/4 of the way then the FMV of error appears again then re - start. A batt pull does not help.

  I wiped and loaded (loader.exe) operating system but when loading cod, it will again restart (reboot occurs when email.cod is loading). Tried several times and never loaded properly. I tried a load OS 428 right and it went well. When it is started successfully, I wiped the device and loaded the hybrid that I used before and everything was fine. When filtered 451, I upgraded and everything is fine - for a week!

  He has just restarted on its own again. I think with the same JVM error code! I'm unable to load the operating system using loader.exe. I even tried the "loader.exe /nojvm" switch does not. I wiped with Jl_cmdr or BBSAK, still no go. I then used DM BB. I loaded OS 320 and loaded correctly. Then I wiped and loaded the OS. It is not load or when it loads successfully, the JVM error still appears 3/4 of the way of the boot process.

  So when I load OS 320, it will load fine even after a battery pull. If I use OS 428 or 451 (both narrowed via Shrink-a-BONE), JVM error no longer appears when using the device or during the startup process. Don't forget not that previously I was using either straight (shrunken) 428 or 451 and a hybrid with no problems.

  I decided to try a derelict OS 451 and used the "Platform.alx" of OS 320 file. It works so far! Pulled the battery about 4 - 5 times already and loaded all my apps and no JVM error for about 2 days. I tried right OS 320 and he also re - will start on its own several times a day.

  It looks like completely wipe the device using BBSAK, Jl_cmdr and DM BB do not really completely clear the device.

  What could have caused the reboots and error JVM?

  EDIT: I tried to wipe the device using the erase option in the security options. The status bar has reached 100% and then restarting the device, the FMV of error pops up again and my 9550 goes back to a continuous process of reboot (even pulled the battery).

  EDIT: I tried the command line "javaloade.exe usb - cloth" to wipe the device and the OS loaded (using loader.exe /nojvm) very well. In the end, shippers said "updated successfully". The unit restarted and about 3/4 of the way - another jvm error! I removed the battery and wait a few minutes before re - insert and is currently the starting now... Will update what's going to happen...

  EDIT: Yes! It finally starts. Will try an another battery pull... 1/4 of the way in which the boot process - another JVM error! Pulled the battery and restart... Error JVM still about 50% in the boot process.

  EDIT: Can't get any OS to load using 'loader.exe' or 'loader.exe /nojvm. It stops during email.cod loading, then restarts. I was able to load OS 320 well via BB DM. problem is when I click on Options, error: "error starting net_rimm_bb_options_app: symbol KeywordFilteredScreen.» KeyChar "not found" is my watered device? Help, please. Thank you!

  EDIT: I tried to load the operating system by:

  -remove the battery.

  -Connect to the PC.

  -Command prompt: command /nojvm loader.exe

  -When it says connection to the device and the battery with a red 'X' icon is displayed, I re - insert the battery.

  -The operating system loads very well but are unable to properly start like 3/4 of the progress bar startup occurs an error in the JVM and then reboot again. Help!

  --> Was able to start properly after a second reboot not forced. Will try a battery pull... JVM error again... Will allow it to boot on his own w/o a battery pull...  Error JVM... Removed the battery, re - insert... Error JVM... allowed to start on its own... Error JVM!... I remove the battery and reinsert after 5 minutes... JVM error yet... What is it recharges without end?

  Just had my 9550's replaced and all of the good mother!

• Bad operating system when I have lots of system restore

  I bought a laptop HP dv6 pavijion of time Costcosome.  It came with windows 7.1 installed.

  After a failed Upgrade to windows 10 computer could not start.  After trying several methods to make it work, I gave up and made a full system restore.

  After the restoration, I was surprised to find that the operating system loaded was windows 7 instead of Windows 7.1

  How to bring back my original Windows 7.1?

  Thanks for the info.  Guess I didn't.  I found that I had already installed sp1.

  I was cast, it was the fact that the number of items in the original loaded operating have been changed or missing on the restored OS.

• TestStand 2010 SP1 supported Mac operating system?

  Hello

  TestStand 2010 SP1 does not support the Mac OS?

  It only supports Windows operating system load

  Please confirm

  Thank you

  Prakash

  No version of TestStand supports Mac OS.

• Satellite L300D: error loading operating system - Ubuntu Linux

  The easiest way, you could any body help me with "error loading operating system"!
  Completely screwed?

  have you checked whether your CD s severe correctly?
  What distribution you install?

• Satellite L300-20W - "error loading operating system"

  When I turn on my laptop, the Toshiba screen charge then it will a blank black screen with a white underscore flashing in the upper left.

  A few seconds later this message appears in the upper left corner "error loading operating system" I watched v online on how to solve this problem, but all that happens is complicated jargon.
  Anyone know how I can remedy this in simple terms?
  See you soon

  Hello

  I can't say with certainty what may be the problem but maybe HDD (hard drive) is a troublemaker.

  Start your laptop and press F2 to enter the BIOS settings. Check if the HARD drive is recognized and registered properly on the page. Load the settings by default using F10, then restart your laptop.

  The same thing happens again?

• Re: Satellite A300 - error loading operating system

  Hi, I have a computer laptop satellite a300 and when I boot the system I get an error message "Error loading operating system" - if some kind posters can help me on this issue, it would be much appreciated.

  Thank you

  Don

  The BIOS recognize the drive? Check in the BIOS.

  You can start in safe mode?
  If you go into the advanced boot menu, select Repair my computer, and then select Toshiba Recovery option. This procedure reinstalls the operating system.

  This feature is only available with a preinstallation of Windows Vista. If you have Windows XP, you must use the CD.

• Satellite A300-288 does not load the operating system

  Hello everyone.

  Today I turned on my laptop A300 and does not load the operating system. In other words, Toshiba logo appears, the message "Press F2 to enter SETUP", but not in continuity with the boot. Yesterday it worked and did not update the BIOS or something else.

  Someone has an idea? I deleted a both SDRAM and vice versa, to check that the problem wasn't RAM, but no. There is no beep. LED touch 'NumLock' and other, power on and off when I have impulses, so the keyboard responding but by pressing F2 or F12 does nothing.

  Thank you very much for your help.

  Start your laptop with F8 and test if you can start the operating system in safe mode.

• Error loading operating system - version of WHS disks

  I have an old MSI k9 & AMD x 2 4600 + Im running WHS v1 (but I don't think it's a problem WHS).

  Moments ago, the server crashed (bad discs).  First, the configuration of this system has always had a problem starting from cd/dvd player and always been specific as to which SATA connection is used to start a disk of. In the past, I had to build a system disk / boot on another pc then it switch.

  I did now, twice. The reconstruction on the main PC went without a hitch. The new boot disks joyfully on the main PC. I transferred the drive (s) in the server box, and I get the error "error loading operating system".

  I tried to connect to all of the SATA ports in turn, with different cables, including one that was on the other PC. I removed all other players to avoid confusion.  Software diagnostic WD gives readers a certificate of good health.  BIOS identifies the present disc, and it is configured to boot from it as first choice.

  The BIOS is the same as it was when buying - but this version has 2 previous builds to get

  I have to believe the following

  1. the discs are good, and the construction is lilkely ok.

  2. the cables are also correct.

  So the fault (s) are:

  1. the SATA controller has ceased to be particular that disc it starts from, allow no boot at all, so a fault of SATA controller

  2. There is something in the full version, which is connected to the main computer - maybe I should stop the construction earlier and swap discs then?

  3. a BIOS setting is in the way and I can't.

  4. something else is at fault

  Its the thing that bothers me and so I hope that someone can suggest what I could try next. I Apologise if this isn't the right place for this, I am new to this sort of thing. Best regards, Michael

  Hi Michael,

  It is suggested that you post your question related to Windows Home Server on the link here. They are a dedicated team who assists questions about Windows Home Server. Message here:

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

• "Error loading operating system" after windows update

  I have an ASUS EeePc netbook model: 1005PEB. Last night before going to bed, I stopped the netbook and it has begun to install and configure windows was last updated. I left on the office do its thing and went to bed. This morning, I got the netbook and it went out of the car and it turned on while I was about to leave the House (before ask you, no I ' was not flying). He started installing all the updates that it had installed the night before. It has gotten to the point where it installed the last element and hung up there. I leave a this screen for 45 minutes and nothing has changed. I went against my better judgment and off the netbook. When I went immediately to turn it back on all I get is "error loading operating system". I tried to use F8 to try to start it in safe mode and I can always access the BIOS. How do I get this service still? I don't have really any data here, I'm too preoccupied. Thanks for any help anyone can offer.

  Hi argyle_83,

  Were you able to boot into safe mode?

  This problem can occur if your computer's BIOS does not correctly manage or support the capacity of the hard disk on which you install Windows 7. You can try the steps below to resolve this issue.

  Method 1: Obtain the latest BIOS updates

  WARNING: This article contains steps that may involve changing your BIOS or parameters of semiconductor (CMOS) to complementary metal oxide, or that may require you to make physical changes to your computer hardware. Incorrect changes to the BIOS of your computer may cause serious problems. Microsoft cannot guarantee that problems resulting from changes to your BIOS can be solved.

  Your first step to solve the problem of the error loading operating system should be updated to your computer BIOS.

  Contact the computer manufacturer to find out how to obtain and install the latest available for the computer BIOS update.

  Find information of BIOS on your Netbook from this link.
   
  http://support.ASUS.com/download/download.aspx

  Here are answers to some common questions on the basis of input/output system (BIOS).

  BIOS: Frequently asked questions

  Method 2: Run the Startup Repair

   

  Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting.

  Refer to this article for more details.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error loading operating system in Windows XP

  My machine was working fine and then restarts, showed the message "error loading operating system" and does not start.  Any suggestions on the best way to recover? I have not tried anything that either still, wanted to determine the best approach to avoid damaging the data that can be retrieved.  The machine was loaded with XP SP3 and all the Microsoft updates current.  The XP OS disk I have is very old, pre-SP1, so when I had to build my mmachine in the past, I had to go through the process of loading all the service packs and updates.  You do not know if using this CD of OS in an attempt to repair the operating system on the hard drive will do more damage than good.  Suggestions anyone?

  http://michaelstevenstech.com/XPrepairinstall.htm

  How to do a repair with XP installation

  http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp

  New XP installation

  XP discussion groups:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Link above is to the XP newsgroups.

  There is a list of groups of discussion XP to the bottom of the left column.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Error loading operating system (Win XP Pro);

  On a clean IBM T40 (old) laptop, after succesfull re-install of Win XP SP3, Office 2007 and other members of the staff, I made the mistake to invoke the backup/restore preinstalled internal IBM software. This caused the system to boot a new partition hidden in order to backup, but something went wrong, system broke down and nothing worked. I ' v has managed to recover everything in partition magic, reactivate my main partition, deleting the hidden partition and if I start the system using an external bootable CD appears as the Windows CD, or any other - it seems that everything is on my drive HARD (c).
  My HARD disk system initialization returns an error: "error loading operating system".  I tried Fixboot and FixMBR from the Console, but it does not solve the problem.
  Looks like what I need is the eqvivalent of the old fashioned the ' sys c ", in the days back/Win3.x. Any help? /CE

  HELLO ecnl

  Please use the FORUM of ANSWERS

  This is the Forum for Windows VISTA I can redirect you to Xp:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx

  Sorry for the inconvenience.

  Engineer Support Justin M. Microsoft Answers visit our Microsoft answers feedback Forumand let us know what you think.