Why does not start the windows firewall with advanced service on my windows 2008 r2 box?

Similar Questions

• Satellite C855-1GN does not start the Windows system

  My Satellite C855-1GN will not load Windows.

  After pressing start it say starting windows the four colors appear in the center of the screen and seem to vibrate slowly but will not following charge.

  I ve restarted and run the fix for the system, but it cannot solve the problem, run the system restore but luck is.

  Can anyone help?
  I put t really want to reload the discs so it s not necessary that the girl has loads of work United to this topic.

  She may lose.

  see you soon
  Phil

  Hello

  You are able to access the advanced boot menu by pressing F8 while turning on the unit?

  If you are able to do so, you should try to start the computer using one of the advanced options available in the start menu.

  You can try to start the laptop computer using the last known good configuration or you can try to repair the system by automatically selecting the repair my computer option, you can try to start the machine in safe mode to access important data on the HARD drive.

  Finally (after data backup) I would recommend to recover the laptop using the Toshiba recovery media

• VN7 791G - does not start the Windows operating system

  So I got my Acer VN7 - 791 G for 5 months now and until last month, everything was going fine until suddenly, the system has become VERY slow (operating system and programs have been suspended) and the boot process has long redicilously. To exclude a software problem, that I decided to restore the default computer via Acer recovery, hoping that would solve the problem.

  Unfortuantely it's still very slow after a successful reset and all of a sudden one day after a reboot the system decided he did not want to join the opening scene of session windows more and decided to stay on the loading screen Acer or the loading screen 'Prepare auto repair' Acer.

  I decided to leave the system to run to see if it would eventually reach the opening of windows session, but he never did and she now does is continue to stay on the Acer loading screen or gives me a black screen with the mouse pointer (nothing happens if I have nothing at this point (, or if I leave it running). Same thing happens when I try to press Alt + F10, it's just a black screen.

  As it is still under warranty, I intend to ship to the Acer Service, however I read some bad reviews before I do I wanted to see if:

  (a) someone has had the above question on their model, and
  (b) are the comments that I've read about Infoteam Acer repairs without merit?

  Thank you very much.

  Sounds like your hard drive is broken.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• My acer aspire one does not start. the scrolling windows screen, then screen turns off. logon appears and resets, sys

  My acer aspire one does not start. the scrolling windows screen, then screen turns off. but after a long time (45mins) the login screen appears and d sysytem restarts. I have a multi boot with 2 installations of xp, and this happens with both bones. not able to access my sys to bak - up also. all f8 options were considered, but no use.

  I have some bad sectors on d: (have total 3 drive partitions c:, d:, e: with xp on c: and e :))
  the sys wud show a blue screen and reboot when certain file wud b accessible on d:... now the sys cannot start all... pls help...

  Hi Srimotu,

  ·         You get an error message or an error code?

  ·         Have you made changes on the computer before this problem?

  Follow these methods.

  Method 1: Try starting it in last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2: Try to start in safe mode.

  http://support.Microsoft.com/kb/315222

  If you are able to boot into safe mode, try a clean boot.

  http://support.Microsoft.com/kb/310353

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  Method 3: Disconnect external devices such as printer, scanner, etc. and try to start.

  Also disable automatic restart in the event of system failure

  http://support.Microsoft.com/kb/307973

• I updated windows 10-level, he wiped my photoshop. downloaded 11 elements, it does not start the installation

  Hello

  I need help! I use photoshop a lot. I started at level 10 windows and it wiped my photoshop. I downloaded again, it does not start the installation. I tried redownloadeding and it says it can not extract it because all the parts aren't there. Would love to be happy again with photoshop.

  Hi Mark,

  You can download Photoshop elements by using the following link: Download Photoshop Elements | 14, 13, 12, 11, 10

  Be sure to download the two files available for download.

  Kind regards
  Rahul

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Equium A100-338 does not start the OS Vista - update Bios?

  Hi guys,.

  My laptop (a few months) decided to die and was told by tech support that it might be because of the BIOS. The problem is that the computer does not start the operating system (Vista) and the update of the BIOS available only is the version of windows. Are there any other mirror to get the traditional update or even a way to convert a the update the BIOS from Windows startup disk?

  Thank you

  Hello

  If you can see that one version of BIOS on Toshiba page then only one version exists and is available!

  > The problem is that the computer does not start the Vista operating system
  I don t think that BIOS could be responsible for this problem.

  You must first provide more info on this problem!
  The laptop goes to home Toshiba screen? Have you tried to recover the laptop with the Toshiba Recovery CD?

  Please provide details!

• Why does not start downloading Photoshop elements 13

  Why does not start downloading Photoshop elements 13

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14 | 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14 | 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Pavilion dv7: my Pavilion Dv7 laptop computer does not start the system recovery options

  So it told me to turn my phone off, then back on whilist cling the key F11. But when I do it my is laptop beep loud noise and rest on the logo hp, whilist is on this screen is says 'System recovery F11' in the lower left corner and does not move on the screen, how to fix this?

  Hi @Jaytee2 ,

  Thank you for visiting the Forums HP's Support and welcome. I read on your HP laptop and get a blank screen or black at startup. Try perform a reset.

  When you perform a hard reset note remove all USB devices. Disconnect all non-essential devices.

  Here is a linkto computer does not start for Windows 7.
  
  Here is a documentthe performance of a Windows 7 system recovery.

  Do you have records system for this laptop?

  I'd be happy to help you if necessary. How can I find my model number or product number?

  Please let me know.
  
  Thank you.

• Satellite A135-S4437 does not start the Vista operating system more

  Hello

  I have a Satellite A135-S4437 old laptop computer for 2 years. It is not start the Windows Vista operating system. When I press the power button, I can't see the screen "in touch with tomorrow TOSHIBA" and below in the status bar is the option press F2 for SETUP or press F12 for the boot device selection menu.

  I tried pressing both F2 and F12, and none of these options has nothing to do. They give just 'Please Wait... "and it remains right on the screen to touch.

  Thanks in advance for any help!
  PG

  Are you can access BIOS by pressing the ESC key?
  Select this check box.

  But to be honest, it sounds like a BIOS problem, and in the worst case, you will need to ask the technician to mobile to help.

  Welcome them

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Could not start the Windows Security Center service.

  Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

  the error code says...

  one or more ActiveX controls could not be displayed because that is:

  1. your current prohibiti of security settings on this page activex controls running or,

  2. you have blocked an editor of one of the controls.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  I suggest you follow the steps mentioned below.

  a. click on Start menu and type regedit.exe in the start search box and press ENTER.

  b. navigate to the following location. You must remove 1 (parasite) of additional area

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
  with number Pseudo-graphique, you will see before the number of zone 0.

  c. check to see if the problem is resolved;

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

  Problems with VSS and DTC... dunno how or serious errors are

  One of the two messages I get the message this is the right place to post

  Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

  Operation:
  Get an interface that can be called by for this provider
  List of interfaces for all providers support this context

  Context:
  Provider ID: {262b716e-bb23-41b5-aaef-e2c15e767167}
  Class ID: {790f2886-9889-4c99-8ef5-531add05d044}
  Snapshot context: 0
  Snapshot context: 0

  Hey artinusa,.

  Welcome to the Microsoft Answers site.

  This error message is seen only in a Windows Server environment.

  The community more suited for this problem would be the Microsoft TechNet community. Please post your query it better support.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  Have a great day.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

  Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

  Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

  This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

  I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.