XPS 9550 4K screen flashes again bios

Similar Questions

• XPS 18 - touch screen in the BIOS?

  Hello world

  Anyone know for certain if the touch screen on a tablet PC from Dell XPS 18 should work in the BIOS?

  There are buttons in the touch interface and a tactile keyboard in the BIOS, Dell support seems to indicate that the touch screen probably would not work in the BIOS but there is no windows drivers.  I thought that it was strange to have one without the other, but it only would be not the first time the options were left in a tech design.

  The tactile feature on the one we have here in the Office has stopped working and still does not work after that Dell has replaced the entire screen.  I'm hoping to make sure that we indeed have a hardware problem and not an obscure issue of Windows 8, but I don't know how to test it outside the Windows environment if it is not designed to function in the BIOS.

  Thank you.

  I thought that I would like to boot in the BIOS and try out it for you. Drum roll please... Yes! Touch works very well on all the screens of the BIOS on my own.

• Re: Blank screen on Satellite A200-1 body weight after flashing the Bios

  I have a Satellite A200-1 of body weight, and I flashed my Bios when the laptop froze.
  So I had to restart now, the screen does not light.

  Any help on what to do?
  Do I need a new toshiba Bios Chip?

  I have a Satellite A210 - 16G and I decided to the new version of BIOS (2, 00-WIN32) flash. I downloaded the new version, the decompressed files two (setup.exe and alaa200a.rom), quit all running programs and disconnected from the internet and launch the setup.exe.

  After a program window apperared and it starts automatically check my bios version (strange thing - cooler system started working with maximum RPM) and after 5-10 seconds, this window became blink and at the top, there was a message 'no response '.

  I thought that it is ok and I expect about 15 minutes for a result...
  But I suck. I closed the window and tried to restart, but suddenly I got a white screen.

  I disabled a camputer in now the power button / stop.
  And after that I can depend on to it - I press the power button, then a power led lights and that's all, blinking screen, no response.

• Satellite U400-131 crashed while the screen of the BIOS udpate - now black

  Bios Update crashed my laptop Satellite U400-131, now I got the black screen and don't know what to do?

  Someone knows how to fix this?

  Thank you

  Vries Matthijs

  This bad s Companion
  It was the worst case that could appear wile BIOS update.

  There is not a lot of things you could try
  In your case the ASP must be contacted in order to check the machine and the module ROM where the BIOS is stored

  If you're lucky, while the ROM module must be flashed again and the laptop should start again if the worst cases the motherboard must be replaced.

• T520 keeps restarting before reaching the home screen of the BIOS

  Hello

  has obtained a T520 here (nVidia GPU) that reboots constantly and never reaches the home screen of the BIOS:

  -power LED button turns green

  -fan turns and optical drive is accessible

  -fan, the LED shuts off

  -pause of about a second and the whole sequence starts again

  This happens with the power supply and a battery. HARD drive is deleted.

  I already seconded the optical drive and the BIOS battery.

  Any other ideas? Would it be the result of a BIOS update failed? Or a few screws - up variables UEFI?

  Is there a procedure for recovery of crisis for the T520 update the BIOS for the boot block?

  Kind regards

  jal2

  I have reflashed the BIOS area in the SPI flash (offset 0 x 500000, length 0 x 300000) and the error disappeared!

  BIOS version is 1.42, the source for the binary file was the. FL1 updated Win7 Lenovo BIOS file (same offset as shown above).

  The only problem was that the SPI flash came with WSON package, so I could not use the clip Ponoma and had to solder wires.

  See you soon,.

  jal2

• Is there a method for re-flashing a BIOS corrupted for Acer Aspire One D260 (D260-2Dwk)?

  My what Acer one D260 does not start in Windows, I get only a black screen when activated. I downloaded the BIOS support web page, but I can't flash as the computer shows nothing, I can't get into BIOS or Windows.

  So, I would like to know there is a way to Flash the BIOS again in these circumstances (as I found for Acer Aspire A110 or A150, but the method found in this forum does not work with the Acer Aspire One D260.

  If the system does not start, we do not have a method available for the users final Flash the BIOS.

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Dell XPS 13 stop during sleep after bios upgrade

  Recently updated my BIOS Dell XPS 13 L321X-the worm 8. Since then, whenever I close the lid and put the laptop to sleep for several hours, the processor seems to come and the backstory is very hot. When the cover is opened, the screen remains blank and no wake mode 'sleep'. The only recourse is to make a hard stop with the power button and then restart. The laptop restarts then black screen troubleshooting, or select the normal startup of windows. Since then, I tried to update all the drivers, but still no luck. He continues to run hot and won't start after placing the phone in sleep mode.

  Any help is appreciated!

  Divider ~.

  Thanks for the quick response!

  To review, my problem started when I updated the BIOS to ver. A08. Before reading your solution, I ended up flashing my BIOS downgrade - worm. A07.

  I started a series of applications and then closed the lid, let go in mode "Eve". After a long period of time, I opened the lid and the wake of the computer normally with no issue. No screen cases, no empty overheated. And not need a hard stop and restart with the power button.

  Hope that this remains the case, I will record your steps suggested in case reports of problem, but so far, it seems that BIOS upgrade vA08 was the problem and a reflash with v A07 was the solution.

• Satellite Pro A300-257 while flashing the BIOS

  Hello

  I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

  I read many forums and it seems im not the only one with this problem.
  I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
  I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

  In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
  Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

  Any help will be appreciated with gratitude

  Thank you very much

  Hi mate

  I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

  The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

• Windows 8 fingerprint reader no longer works (need to Flash the BIOS to fix)

  I have a DV6-7014nr bought around September of 2012.  I have upgraded to WIndows 8 when it first came out.  I had no problem with the reader of fingerprints on Windows 7, but do not use for a long time.

  As the subject says.  I can run it for a few weeks (on Windows 8), and the fingerprint reader stops working.  None of the biometric devices are listed in the Device Manager.  If I try to load the driver, it does nothing, as if the player is simply not there the responsibility of the driver closes just (with no message).

  Peripheral Biometirc in the Panel control says there is no biometric device found and simplepass opens without the fingerprint reader recognized.

  The only thing that solves this is my BIOS which comes Insyde to re-flashing. It is noted in the setup of the BIOS relating to biometric devices.  I have just discovred that BIOS update solves a problem because there was an update that I applied.  Have to reapply the update of the BIOS to fix this seems excessive to us.

  Added March 29, 2013:

  I just re-applied the BIOS two days ago and already the figerprint teader plug working again.  I tried a hard reset (because I saw that as a solution previously, and it is easier and faster to re-flashing the BIOS).  Who has shut down, remove the battery, now the power for 30 seconds button, boot the system without the battery.  He has not fixed the problem and I can't even understand why the fingerprint reader keeps disabling.  A re-BIOS flash solves the problem, it seems that the problem must be with the BIOS software.  Oh I also had turned off the "Allow windows to turn off the device to save power" for the biometric device before he went kaput.  It doesn't stop of is suckier.

  There must be a better way.

  Thank you

  Hello cjwh888,

  Try to restore your BIOS then use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• Equium A60: display screen flashes constantly

  My A60 is not so old and after 20 minutes after ignition, the screen flashes constantly for about 10 minutes then stops then starts again. I thought that maybe it's something to do with the computer over heating, but its not even hot and the fan is not blocked. Any Suggestions? Also seems to take ten minutes to load up, which seems to long for a 2.8 GHz machine or is this normal?

  Any help would be appreciated

  Hi aleeg81, it sounds like the power of the backlight may be suffering from malfunction any or there is a loose video connection. Have you tried to adjust the options and the brightness of the screen to see if it improves things to save energy? If the problem persists and your laptop is under warranty, I would recommend send to Toshiba for investigation. Twinkle is not normal and should not be tolerated if your laptop runs hot or not. Windows should not take 10 minutes to load or perhaps you need to remove and change a few things to improve this, see: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8355
  For more information :)

  Richard S.

• Why do Satellite A100 screen flashes when turned off?

  Hello
  I have a toshiba A100, Go 7600 Gpu, just bought there is two weeks and im very pleased with the quality and performance far :), just noticed one thing today, the room was turned off and the laptop turns off with the screen in open position, I leave it open normally when at home, I noticed that the screen flashes as fixed every 1 min in what appears to be an interval of time with or without AC connected, not a flash very bright but not easy to notice, but I'm sure the flash, so my question is should I worry about this? Thanks in advance :)

  Hello

  What do you mean with the screen? The LCD internal? Maybe you didn t stop the machine itself.

  I also suggest you update your bios and your drivers, maybe it s just a software related issue...

  Here´s a link to find the bios and latest drivers for your computer:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  Give some information about this case, could be interesting, what problem is.

  See you soon

• HP Mini 311 - should I flashed my BIOS?

  I have a HP Mini 311-1037NR (the product number is VBM262UA #ABA).   My OS is Windows 7 Home Premium.

  The question more simply: should I FLASHED my BIOS?

  I just started using my HP MINI again after a year of rest.  I did all Windows 7 updates that can be done.  I was even dedicated to device drivers and updated all those requiring updates.

  Thanks to Provost User DavidPK, I identified a stack as error being the external battery.  I ordered the following and (Amazon says) it should arrive at my home on or before February 11.  Then, I'll be able to use it without a power cord (yay!).  Looking forward to that.  THANKS, DavidPK!

  Now, I'm trying to decide now if I should update or FLASH the BIOS?  It can be risky, I understand.  So, I wonder if it is a gesture that would be the rishk?  I certainly don't want to update something on my machine just to say that I've updated.

  Thoughts?

  Hello

  Good to hear the battery is on the right track

  What about updating the bios, my personal opinion is that this should be done only if the update fixes a problem you already have, or adds features that you need.  Otherwise, if everything works well, I'd recommend flashing with a new version of the bios.

  Best regards

  DP - K

• Pavilion g6: the screen flashes but will not stay

  When you press the power button the laptop starts to power. A message "press the esc key to access the boot menu" flashes briefly on the screen, but the it turns off and remains empty. The laptop is continuing with its power in sequence and the screen flashes briefly from time to time showing what seems to be the boot sequence screens, but nothing remains on the screen long enough to see what is displayed. Then, the screen remains blank.

  Hi there @NickRDavis,

  By reading your post, I gathered that you see a black screen on your laptop HP Pavilion G6.

  Before I provide documentation of troubleshooting, I would like to take a moment to welcome you to the HP Support community, where you can ask questions, find solutions and help others! To show your appreciation, please click the "Thumbs up" on this post.

  Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems. So please try and connect an external monitor or TV to your laptop to see if the screen displays correctly there.

  Have you connected the laptop to an external monitor or TV? Please try this step first to see if the display on the external monitor or TV is black too.

  Have you tried running in Safe Mode?

  Did you do a BIOS update?

  Have you tried tests to hardware failures?

  You have the phone broken?

  What you sit your Notebook on when using it?

  Did you do the updates using updates of Windows or HP Support Assistant?

  Have you tried to clean up all the vents in Notepad?

  Have you tried to do a hard reset?

  Have you received any error messages?

  You have beep codes or flashing LEDs?

  Did you do a BIOS reset?

  There is a document that has the reset steps, connecting steps an external monitor, BIOS reset steps and Reseating the Module memory he intervenes. The document is called black screen troubleshooting with no. Error Messages at startup or start-up. Here is a document for you have called the computer does not (Windows 7).

  Here are a few other documents for you that can help:

  • Computer hangs or freezes
  • Reduce the heat inside the PC to avoid overheating

  If you manage to get the laptop lights using the troubleshooting links in the previous questions, please try a Test hardware. HP provides the diagnostic software that you can use to test the hardware components on your computer. to disprove or confirm the hardware failures when something is wrong.

  Thank you for your participation in the Forums of HP where we want to help you as well as others who may encounter a similar problem that you have. Please consider tagging the post in order to resolve your problem as "Accept as Solution" to help other members of the community!

  If you need assistance, I would be more than happy to continue to help. When you repost, please provide me with the detailed results of the above troubleshooting and your model number (How can I find my model number or product number?).

  I hope this helps!

• ProBook 470 G3: ProBook 470 G3 fan system after flashing the BIOS errors

  B has recently purchased a HP ProBook 470 G3 with i7 CPU. When I got the laptop I placed my own memory and M.2 SSD in and performed a clean installation of Windows 10 x 64. Everything was fine, I installed all the drivers and the laptop worked perfectly. However, when I flashed the new BIOS, V1.07 Rev A, I started to have problems.

  I use the laptop for academic purposes, I so open and close several times a day. After flashing the BIOS again, the laptop awake sometimes not, and trying to turn off it I had to remove the battery. Would not even holding down the power button for 20 seconds. While booting after removing the battery, I'd get a system error, 90 b error code fan.

  I tried re flashing version 1.07, but returned eventually to version 1.06. This version works very well. It was a real let up to me, given that this laptop costs €1400,- and should be a book reliable business.

  Is their another experiecing the same problems? If so, how do fix you it? And no one knows when they will be a stable version of BIOS V1.07?

  Use the PC Hardware diagnosis UEFI to restore the previous BIOS so that that you flashed cause questions.

  Press the power button and then immediately begin to press the F2 key to evoke the Diagnostics menu.

  Choose firmware management. In the menu next, choose and click on revert to the previous version.

  You can also create and use the 3-in-1 usb to accomplish the same.

  http://WWW8.HP.com/us/en/campaigns/hpsupportassistant/PC-DIAGS.html?JumpID=va_r602_us/en/any/PPS/pl_ot_ob_ds_pd/HP_PC_Hardware_Diagnostics_cc/DT

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.