XQuery question fn:error function

Similar Questions

• Ask questions about the functionality of EA8500 MU-MIMO

  Dear Linksys

  I bought EA8500, and it arrived today.

  I have two questions about the functionality of MU-MIMO of EA8500 AP.

  1. I want to compare the performance between SU-MIMO and MU-MIMO, but there is no option to control this feature in the router admin page. Is that one of the possible ways?

  2 EA8500 supports 1733 Mbps wireless speed, but it resembles the speed of 1 Gbps ethernet cable.

  This router supports really speed 1 Gbps ethernet? or y at - it an option to support more throughput as the aggregation of links?

  Thank you

  Hi, hyeonu. For your first query, it is not possible because there is no option to disable the feature of MU-MIMO on your Linksys EA8500 router. In addition, with regard to your second, you can get a higher throughput of 1 Gbps since this is the maximum capacity of your ethernet connection.

• Error "function not allowed for the license.

  Hi all
  
  I get error "Function not allowed for license" when I'm collecting details of a custom user interface card.
  The user interface card called a Business Service that calls a service program.
  I wrote a page for the service program service.
  This error indicates which license?
  
  I use the BCC 2.3.1 and Eclipse SDK 2.2.0.5.

  Check the Admin Menu-> Installation Options framework-> Modules available to see if any module is disabled.

  Then go to the Menu Admin-> Configuration-> Feature Type = Module of Configuration feature and delete an entry of a module where the power is off.

  Try again the user interface card

• Satellite Pro A120 - error function keys not working and affected

  I have a Satellite Pro A120 PSAC1E-04Q00VEN.

  A couple of weeks, I started to have a dialog "Error of TouchED" to come to the start box (containing the message: 'Thotkey' recovery has no code error 0 X 00031402, 0x00000002) and at the same time the function keys did not work.

  I spent several hours as a result of the wide variety of questions that have been posted on this forum and elsewhere regarding this problem with computers laptop Toshiba, but nothing has worked. I reinstalled all the drivers from my initial backup disk, installed new drivers on the Toshiba site, updated the bios and restored the system to date before the problem started to occur. I also can't find Thotkey.exe everywhere on my machine.

  Can anyone help with this? It seems to be a common problem, for which he doesn't seem to be a definitive answer. Any useful response would be really appreciated.

  David

  Hey Buddy

  Go to the page of European driver of Toshiba.
  Select your laptop model and download and reinstall the tools and the following drivers:
  -Common module
  -Utilities for display devices Hotkey
  -Utilities
  -Wireless keyboard shortcut

  Check it out!

• Questions MathScript Matlab function calls

  I have a question about the m-script function call (MATLAB) in Mathscript Labivew 2009. I have attached my buggy vi for an example:

  1. I called a function 'remodel (Sigma0, [O O Q M])"in Mathscript, it gave me a syntax error, but not in Matlab R2009b. I guess that it does not tolerate a great deal of input parameters. Any idea as how use the reshape feature in Mathscript?

  2. Another problem is that I've defined a function m-script with 2 parameters, in Matlab, I can call the function with a single parameter provided, however in Mathscript, system reports error if I only provided 1 parameter to a function of 2 parameters. Any idea as how to cope with this problem?

  Because I have a lot of code in the format m-script, I don't want to rewrite a lot of new code.

  Thanks for any help.

  Hi aggressor.

  Indeed there is a small difference in the matlab function and labview mathscript reshape function reshape. The difference is that Matlab is considered always any 2D array from the perspective of lines... where LabView considered from the perspective of columns... that is, if a table 2D likeX = [has and b, c and d] is here and the (x, 1, 4) reshape in labview will give out like a, c, b, d in an array, matlab, the output will be has b, c, d in a table.

  And in Labview syntax you gave will certainly give a syntax error. Please visit the labview syntax help.

  Thank you and best regards,

  srikrishnaNF

• SysWOW64 and Question OpenGL error

  OK, so for about 2-3 weeks I had a problem with OpenGL graphic running programs, usually to get Visual errors (missing, misplaced textures images etc.) and messages during the installation of programs such as Lego Digital Designer indicating that the OpenGL is 'missing '. This occurred very shortly after the last, I tried to update my graphics AMD Radeon drivers.

  Today, I did a search of system to see if I was missing the file. I actually came with 4 results, System32, two of them downloaded AMD drivers and the other in the "SysWOW64" folder I was suspicious of it because it was stuck in my smart Norton Firewall. In addition, the file was closed as being created on June 19, 2014, which is about when I started noticing problems. I did the research and got two answers as to what this record was:

  Answer 1. : SysWOW64 is a legitimate Windows file necessary for 32 bit running on 64-bit Windows 7 (I'm under 64-bit, of course).

  Answer 2. : SysWOW64 is a Trojan which messes with windows functions and creates mistakes posing for other programs.

  I tried a manual solution to remove SysWOW64 files in safe mode, but I couldn't move anything to recycling. Before I could destroy my computer, can someone tell me which answer is true?

  Also, anyone know how I can fix the mistakes of OpenGL if SysWOW64 isn't the problem?

  Of course, there is a small chance of malware disguising or hiding in the file in question, but

  false positives are quite common with anti-virus programs. Norton is pretty well known.

  If you downloaded the drivers from the AMD website, there should be no need to worry about malware.

  -Try to run a check with Malwarbytes.

  Sometimes you just have to disable the firewall and AV temporarily when dealing with stuff

  who is blocked by AV.

  Or... go through the hoops to permit an exception to everything which bypasses that you know is trustworthy.

  Malwarebytes: Download free anti-malware

  There are several generic files for the AMD and Nvidia graphics that live in System32 and SysWOW64. Some will not remove these are Windows system files, but there is a small

  possibility a malware blocks their deletion (or lives here because the file cannot be

  deleted).

  (In the past (XP) Windows for AMD and Nvidia graphics file might be deleted, but)

  were relocated when Windows restarts. Win7 can do similar).

  -L' safest option to deletion, is to move or rename the files before deleting. If a new file is installed by Windows when you restart it, or by the drivers you install,

  You can safely remove the old file.

  -Generally, the only time you will need to get down and dirty with removal of the graphics driver is then

  current driver installation is corrupted, or when switching between AMD and Nvidia.

  One of the better programs for this is Fusion driver.

  Treexy external page

  -First uninstall the drivers via programs and features - restart.

  -Performance pilot merger and taking care to select only the AMD graphics drivers, allow fusion driver

  to remove entries from the registry and the remaining files - restart.

  -Only install graphic driver components you are using (for example - if you are not using HDMI do not install the)

  Drivers audio HD from AMD), and... reset.

  -If you don't have already done - do not allow the "Optional" of graphics driver update

  Updates of Windows to install the graphics drivers.

  This update is updated frequently, and if you let Windows updates install automatically

  It may corrupt drivers.

  -I have never had a problem with OpenGL and don't know what led to problems, but windows

  errors can be misleading. "OpenGL is missing" could result from a number of issues,

  even if the file is not missing.  An installation program or file corrupted are two examples.

  -The problem could also be linked to the project that you are working with this software.

  I've never used this software, but when problems similar Oblivion modding (lack of textures, etc.), were due to the error of the user.

  -In addition, depending on the age of the graphics card, new drivers may not be the best for your

  system with this software. If a previous pilot worked properly, reinstall that.

  .

• reference error function

  I have the following question

  Code:

  FUNCTION FN_FME_RPAD

  (

  p_s_cadena in TANK,

  ) RETURN VARCHAR2 IS

  v_c_Space VARCHAR2 (32767).

  BEGIN

  v_c_Space: = LPAD (p_s_cadena, 10, 'x');

  RETURN SUBSTR (v_c_Space)

  END;

  variable: = FN_FME_RPAD (p_s_cadena = > 'tricampeon_1981');   OK, that works perfectly ok

  from there, it gives me error

  Select FN_FME_RPAD (p_s_cadena = > name)-fails here

  in results

  of the customer;

  within the selection it gives me error pass by reference, but here works well

  Select FN_FME_RPAD (name) - it's ok

  in results

  of the customer;

  Then? This is what Solomon and I said... before 11 that does not allow notation named for the function parameters in sql...

• Error function ValueList after migrating CF8 to CF10

  Hi all

  We are migrating our reports of CF8 to CF10. (uninstalled existing CF8 and installed CF10) in 32 bit OS.

  After upgradation of CF10, tried to open our report, we got the below error.

  ----------------------error --------------------------

  ValueList() function has a parameter that is not valid: 1 DS_ODBC_LIST.entry.Parameter of function ValueList which is now DS_ODBC_LIST.entry must point to a valid query name.

  ------------------error-----------------------

  -------------original code -----------------------------------

  < CFREGISTRY

  ACTION = COUNT WITH ALL

  NAME = "DS_ODBC_List".

  TYPE = "ANY"

  DIRECTION = "HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC. INI">

  < cfset DSNnames = valueList (DS_ODBC_LIST. Entrance) >

  -----------------------------original code--------------------------

  Then tried to dump / print DS_ODBC_List using CFoutput/cfdump, then we got error like:

  Variable DS_ODBC_LIST is not defined

  in CF administrator the CFREGISTRY tag is in the list of active tags.

  can anyone suggest me what the replacement tag / a patch, I can use to solve the problem?

  Thanks in advance!

  installilng mandate patch and fix-7 sold the question, thank you all

• Question about to_date() function?

  Hello
  I have a question about the to_date() function.
  I am aware that for the to_date() function, we should give the format of the input string.
  My current settings for the NLS_DATE_FORMAT parameter in the NLS_SESSION_PARAMETERS table is "DD-MON-YY."
  Then, when I give

  SELECT TO_DATE('15-DEC-2008','DD/MM/YY') it should error out because the format is not same as the format of the input string('DD-MON-YY').

  But this isn't any error out.why?
  Also please tell me if the format of SYSDATE is taken NLS_SESSION_PARAMETERS table or another table.

  Please take a look at Unexpected result with to_date

• Questions about the function "movie Diff file with...". »

  Hello

  I started working on a project where I'm now a piece of the old code written by an employee has since left my company.  This is a file of sequence TestStand 3.0 calling on Labview 7.0 code. The thing is, there were two of these facilities at different times and, somewhere in the Woods between stations 1 & 2, the code base diverged.  Part of it was due to not being able to get the material in double right for the PXI chassis and part was, apparently, due to the fact that the customer has used the 2 machines to test different models of the object to measure.

  So, I'm looking for copies of the code installed on both machines using the diff feature in TestStand base.  (If that makes a difference, I do this view in TestStand 3.5 since TS3.0 disappeared mysteriously some corrupt on me right now on my main development machine, and if the memories are good, you need to uninstall all the latest version of TS to reinstall an earlier version.)  A quite fun process, no doubt, but a little of your time.)

  Anyway, the first thing I noticed is that many sequence steps have different values of ID of the step Properties.Step look like this: "ID #: 2vMTp0db002mQDXArddRSA.  Play with the diff screen showed an option "Ignore the unique ID of the Step" which got rid of these.  With regard to these single-step ID: when they are generated and they remain constant on a particular machine?  Beyond simple curiosity, I wonder as an another diff is in some of the "on spending target ' or 'On Custom Condition true target' under certain properties of the step and the value down there looks suspiciously like these unique ID (that is, '" ID #randomstuff' ").  Are they all updated dynamically during execution or break something by changing these (for example if I copy a sequence of a crushing in the other version)?

  So, I have filtered the unique ID's.  The next major area of difference is that many, but not all together, VI Labview calls have a difference in the properties of the step > Flexible Labview adapter properties > ViCall > connector pane Checksum > value.  In addition, in some other cases, ViCall > error > connector number is different as well.  This indicates a different underlying VI?

  There are a few other differences, but I can interpret those.  My goal is to get a file of sequence for two machines, so the code will be easier to maintain.  I think that some of the VI with different amounts of connector pane control can be different between two facilities from one of the different hardware components required a library different driver.  This leads to a third question, what to use identical sequence files when the underlying VI may be different?  Is it just the interface must be the same?  As the connector pane has the same types of data and geometry for the presentations of the inputs and outputs?

  Thanks for any help,

  Mike

  I just got the phone with the help of NOR, so no worries on the answers.

  Short version:

  The unique ID is regenerated when a sequence is copied.

  TestStand didn't need to uninstall to reinstall an earlier version of the above.

  Connector pane Checksum involves a different underlying VI, but having the same geometry/inputs/outputs/types of connectors should allow you to have an another VI of facilities without different sequence files.

  Still awaiting support on the question of if the goto pointers updated correctly when a sequence or part of a sequence is copied.

• utility library error function string?

  I'm working on a library Error Handler, slaughtered most of these wonderful for a (Roberto!).  I can't find a generator of string of code error for the functions in the library of good content (in particular, functions like RenameFile, CopyFile, GetDir, SetDir, MakeDir, all file IO functions).

  Most people refer to types of maximum error tolerated with some explanations of plain text.  But there is no mention of a nice string code converter function, as it is in other libraries.  For example, for the RS232 library, there are GetRS232ErrorString.  Formatting & IO Library, there is GetFmtIOErrorString.

  I don't see it somewhere?  Inside the library of utilities, there is a function called CmtGetErrorMessage multithreaded error code.

  You are right: the library of Urility does not include a function that translates into a meaningful text error codes. I guess that it is due to the fact that error codes overlap in part, so a single function could not be used.

  For example, the-1 error means file not found in almost all file IO Library functions, but it translates into no file found matching the criteria of research GetFirstFile (), for not more files in GetNextFiles () and invalid parameters in MakePathname ().

  Another example: error-2 means GetFirstFile must be called before if returned by GetNextFile () and resulting path too long if returned by MakePathname ().

  And cela given that e/s file section of the library!

  While developing my own toolbox of utilities, I created the following function I know is far from perfect and covers only the file IO features:

  char * CVIFUNC GetULibFileIOErrMsg (int error)
  
  // Messages associated to error codes returned by functions in File Utilities class in Utility Library
  {
      switch (error) {
          case 0: return "Success";
          case -1:    return "One of the path component not found";
          case -2:    return "Resulting pathname longer than 260 chars";
          case -3:    return "General I/O error occurred";
          case -4:    return "Insufficient memory to complete operation";
          case -5:    return "Invalid path";
          case -6:    return "Access denied";
          case -7:    return "Specified path is a directory, not a file";
          case -8:    return "Disk is full";
          case -9:    return "New file already exists";
          default:    return "Unknown error";
      }
      return NULL;
  }
  

• Error function not valid advapi32.dll on startup?

  asking again as my first accepts match failed.

  XP SP3 IE8 4 gig, amd phenom II 840 RAM

  No error of harware in Device Manager.

  I ran security scans, ad scans and antivrus sweeps, nothing helps.

  Reinstalled SP3 I found the only copy of functioning of the ADVAPI32. DLL in the subdirectory of MS and may not perform repair or reinstall from the disc with Service Pack 3 installed. This eliminated the problem and speeded up things a little for about 12 hours and then restart in the morning, everything went hiccups again.

  the biggest annoyance is that almost every program or file, I used to open immediately now takes more than 15 seconds.

  I have cleared the cache, temp files, uninstall files, and listen to the system with the cleaning disk, defragmentation, scandisk and other similar things. other missalligned files is nothing major to come several times.

  im hoping to spare me the gig to reinstall if possible.

  any help would be appreciated.

  Thanks in advance.

  Marking of one (or more) of my answers as RESPONSE will officially close your thread.

• FW 7.0.2 - Synrep questions and errors

  Dear all,

  After our v6.0.4 to v7.0.2, upgrade we get strange errors by e-mail and logging. These errors began after the upgrade.

  Strange is that when we receive an error message, log the error disappeared already.

  Severity  Date and Time      Member       ID              Message                                                                                                                                                                                                                                                                  --------  -----------------  -----------  --------------  -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------   Error    7-4-2014 11:44:20  san4-shared  7.4.3 | 7.4.23 connect iSCSI target ' 10.x.x.x:3260, initiator iqn. 2001 - 05.com.equallogic:xxxx'from '10.x.x.x:55898, eqlinitiatorsyncrep' failed for the following reason: | Initiator, disconnected from the target when connecting.

  Why this error comes up so often since the upgrade? Is this a hardware or software failure? The reason why I ask this is that our other groups do not display this error.

  With respect,

  Andreas van der Linden.

  Dear all,

  Because of your discussion, I took the functions of our network engineer and did an exploring myself. Don't know why, but someone gave us a tree covering weight on these interfaces. We expect a window of maintenance shortly in order to disable this option.

  Thank you very much for your suggestions.

• Error: Function of ms - dos invalid when copying on external drive with Windows 7

  FUNCTION OF MS BACK INVALID WHEN PLAYBACK EXTERNAL DRIVE WITH WIN 7

  Hello

  1. you try to save a data of the C drive on an external hard drive using the Windows backup feature?

  2 does this problem occur when you try to copy / paste normally?
  3. What is the accurate and complete error message?

  If you try to copy and paste the data manually, then try the fix to resolve the problem:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm