XREF (calc Manager) 11.1.2.2 planning business rules

Similar Questions

• Is it possible to include a model of calc Manager after an if condition in a rule of calc?

  Hello!

  I'm trying to create a rule that would first check if certain conditions (pitfall) are met.

  If the condition is true then the rule should go and calculate using a model with different parameters PDT.

  If the condition is not met, then something else is made.

  I test this because I should develop the same kind of solution for another case where the model is much more complicated. Basically, the problem is the same.

  Before you run a rule with a model, a condition to be tested and if the value of CAP are models of should not be executed.

  Here's the rule as we see calc (script edit mode) (Version 11.1.2.3) Manager

  ('Work'

  IF ("Volume"->"BegBalance"-> "DriverSelection"->"LOC"->"real"->"No_Product"->"No_Entity" <>6)

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  ON THE OTHER

  / * STARTCOMPONENT: FORMULA * /.

  "7654321"-> "BegBalance"->"LOC"->"real"->"No_Product"->"No_Entity" = 6;

  / * ENDCOMPONENT * /.

  ENDIF;

  );

  The explanation of the above rule:

  It should 1st check-if a Show Stopper has to value (6)

  If is not equal to 6, then it is and should be aggregations as expected.

  If the show stopper (can find value 6 to the intersection of the cross-dimension), then it should set 6 to another intersection as a control point.

  The model includes an aggregation that is made for different combinations.

  The model script is the following ([YearPara], [ScenarioPara] and [VersionPara] are promtps of design time that can be set when you use the template in a rule):

  Fix ([YearPara], [ScenarioPara], [VersionPara], "EUR")

  AGG (product, entity);

  endfix

  This rule does not, validate because the Manager of calc seems to find something wrong with the ")" at the end of the if condition. (line 2 to the rule)

  I see the calc Manager displays error messages that aren't the real cause of the problem.

  Is simply because the template has fixes and they occur after the fi condtion test?

  For comparison, I have a separate rule where I have only two lines:

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]],"VersionPara":=[["working"]]))

  %Template(name:="CMTemplate1",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]],"VersionPara":=[["working"]]))

  This rule works without any problem.

  looking forward for your comments

  Kind regards

  user637777

  Hello!

  Had, it works:

  The reason for not working had patches after if test condition:

  Now the rule looks like this: (used a slightly altered version parameterless template)

  ('Work'

  IF ('Volume '->' BegBalance'-> ' DriverSelection '-'LOC'-> 'real'-'No_Product'-'No_Entity' > > > <> 6 ' ")

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[[{GV_Year}]],"ScenarioPara":=[["forecast"]]))

  %Template(name:="CMTemplate2",application:="MyApp",Plantype:="plan1",DTPs:=("YearPara":=[["FY16"]],"ScenarioPara":=[["budget"]]))

  ON THE OTHER

  / * STARTCOMPONENT:SCRIPT * /.

  "7654321"-> "BegBalance"-> "LOC"-> "'real '->' No_Product-> 'No_Entity' = 6;

  / * ENDCOMPONENT * /.

  ENDIF

  )

  Model is as follows:

  IF (@ISMBR ([ScenarioPara]-> [YearPara]))

  @IDESCENDANTS ("product");

  @IDESCENDANTS ("entity");

  ENDIF

  So resolved for this case...

  But the other cases I have bugs that I can't go around with IF (solution @ISMBR.

  Kind regards

  user637777

• How to undeploy deployed in planning business rules

  I'm unable to undeploy deployed on Production test management rules. Removal of the calculation Manager leaves BR in planning... is there in another option?

  Try this http://docs.oracle.com/cd/E17236_01/epm.1112/cmgr_admin/ch07s03s01.html

  "To delete a business rule or ruleset from an application after the deployment of the business rule or the ruleset, make it ineligible for deployment by clearing the check box next to its name in the deployment view. You can then perform a full deployment of demand by opening and deploy. »

  You have already deleted rule of Calc manager tries to create empty rules with the same name (if the first full deployment would not help)

  Published by: vvipirailo on June 6, 2012 10:42

• Cannot select overview of Planning Business Rules

  Hello world
  I'm not be able to select the outline of planning while developing business rules (but I can choose the Essbase outline). Whenever I develop the planning node, an error details of which says "Error connecting to server machinename/testapp Essbase." There is a details button that says: "could not connect in the planning" detail: could not connect to Planning Server '.»
  Can someone help me. I am not be able to display the rules in the user planning interface (and therefore can not attach to forms)
  
  Thank you
  Chrystelle
  
  PS:
  Hyperion Version: 11.1.1.1 deployed on Tomcat (by default) in the Windows XP box

  Hello...
  If you created the application of EPMA, you can not use business rules. You must use the CALC Manager. If you have created a classic application, open the application first Web and thn open EAS and see if he comes or not... :))

  Kind regards

  ADB...

• Cannot we discovered 11.1.2.1 planning business rules

  Hello
  Cannot discover us planning that have been created in Essbase business rules?
  Thank you

  Ah, to view the contents you will need to open HBR aka EAS

  Pablo

  Published by: Pablo on December 31, 2012 12:17 AM

• 11.1.2.3.700 Calc manager - cannot open business rules in IE11 but can in Firefox

  Updated 11.1.2.3.500 to 700 for the IE11 support.

  I installed the following hotfixes:

  1 20675028 - SSP

  2 20612400 - workspace

  3 20643564 - hyperion Planning

  4 20929659 - architect EPM (foundation server)

  5 21292109 - Manager of calculation

  6 20768325 - statement and analytical framework

  7. 21240419 - ADF MLR

  I deleted the directory tmp and cache on servers managed and the Planning0 and calcmgr0

  (Oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0)

  History/cache deleted my Internet Explore.

  When I go to the calculation Manager and try to open any business rule of calculation Manager I receive the following informational message: "Please try to reload the component script again." When you click on 'OK' I do not see any text in the business rule. (See attachment)

  
  I can run the business rules of the application of planning successfully and I can see them under "Shared Services" and import/export business rules.

  Calculation of the Manager process runs on the server, the logs show no errors in the Oracle\Middleware\user_projects\epmsystem1\diagnostics directory

  Tried to search for the message but could not find anything about this message.

  Any suggestions?

  OK, I think I understand what is happening, I noticed a difference between the user interface in your screenshots and it seems that you disabled for calc Manager ADF.

  You will be able to confirm is that you run a report of registry and it will have a BINDOWS_ENABLED = true for the CALC_MANAGER_PRODUCT property

  If I pass the ADF to bindows so I see the same problem, is there a reason you do not run ADF mode?

  See you soon

  John

• Issue when executing the planning of business rules

  Hello
  
  I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
  
  Getting the following message while starting business rules:
  
  Error detected while trying to perform the work: naming rules
  
  Newspaper:
  
  [ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  -Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
  
  FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning.     Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
  
  Please could someone tell if you're aware of something like this?
  
  Thank you
  Jean

  Remove essbase Server console of Regional service,
  Add Server Essbase with IP address or host name and try again.

• LCM: Basic rules Calc Manager vs planning files

  I need rule of LCM files and see the rules in 2 different locations, Foundation-> Manager of Calc and planning-> rule files. That is the right file where LCM, and what is the difference between them?

  In addition, files that were brought by the spectacle of LCM under planning-> rule files but non Foundation-> Manager of Calc. Why would it be?

  Thank you!

  FA

  To do this, you need to understand the underlying design. Unlike HBR, who acted as the repository of rules in Calc Manager, rules must be deployed at Calc Manager planning. Once the rule is deployed to planning, it (planning) maintain the copy of the rule in its repository. You can continue to make changes to your rules in calc Manager and there is no effect on the rule in planning.

  So for LCM, you will have the rules in 2 places, in Calc Manager (version may differ from what is in the schedule) and also in planning.

  So you can import via LCM planning rules and it will run without calc in Picture Manager. But if you want to change these rules and deploy it to the planning, you must import the rule via lcm in Calc Manager and redeploy to the schedule.

  Sree - mougel

• CDF in Calc Manager for planning

  Hello everyone:
  
  I created a calc script that he uses CDF (custom functions defined) correctly, but when I create a new calculation in Calc Manager and analyzed, it fail the test. After that, if I deploy this calculation and I use it on the form of a schedule, it does not work.
  
  Bad planning says:
  
  ++ «Error occurred when parsing calc script for a rule...» » ++
  
  It is not supposed that CDF can be used in the Planning? What is wrong with him?
  
  Thank you
  
  Kind regards
  
  Javier

  Yes. This is what worked for me. So, if you take the function JgetStringFromDouble, it has two Boolean parameters (boolean Boolean withQuotes and withDecimal). You must update the code your assumptions in terms of citations and decimal numbers hardcoded in java by removing the IF statements.

  Thus, instead of something like this:

  public static String getStringFromDouble (double withQuotes, double, boolean, boolean withDecimal) {}
  DecimalFormat df = nf (DecimalFormat);
  String dblStr = null;
            
  If (! withDecimal) {}
  df.applyPattern("###0");
  dblStr = String.valueOf (df.format (dbl));
  } else {}
  dblStr = String.valueOf (dbl);
  }
            
  If (withQuotes)
  "" return "------" ' + dblStr + ' \; "
  on the other
  Return dblStr;
            
  }

  You would have something like this: (don't forget to remove Boolean parameters and include orders 'import' at the top of the packaging).

  public static String getStringFromDouble (double dbl) {}
  DecimalFormat df = nf (DecimalFormat);
  String dblStr = null;
            
  df.applyPattern("###0");
  dblStr = String.valueOf (df.format (dbl));
  Return dblStr;
            
  }

  I have not tested, but I hope you get the idea. Once you remove the Boolean and any parameters Pack, it'll work in Calc Manager.

  -Jake

• Error message 404 in the last Calc Manager and Hyperion Planning Logins

  Hi all
  
  When I tried to log into the Manager of Calc and Hyperion Planning (V.11.1.2.2) through the web URL, I get the 404 Error Messages.
  
  If I can get to Calc Manager via the workspace, but when I tried to access Hyperion Planning its launch an Error Msg: required Hyperion Planning.Application Wizard creating applications Module is not configured.
  
  I don't have the Installation/Configuration error.
  
  Any help on this is appreciated.
  
  
  
  
  Thank you
  Mike.

  OK last time :) will check you the newspapers for example \user_projects\\diagnostics\logs\ check the logs in the directory of services for windows and the startup directory for * nix

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Provisioning users access to planning applications in Calc Manager

  What role Shared Services supply determines whether an end user can see a planning application in Calc Manager? One of my analysts can see one of our three planning applications in Calc Manager. I see all 3 apps in Calc Manager, but I have full administrator rights to all. I opened a SR with Oracle, but they have not yet responded to my question.
  
  Appreciate any comment.
  
  
  -Bob

  Reading of:-http://download.oracle.com/docs/cd/E17236_01/epm.1112/cmgr_admin/ch01s03.html
  It should help you.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Run guests from time disabled for stand-alone applications Essbase calc Manager

  Could you let me know if we could assign RTP for a business rule created through the Manager of calculation for Essbase stand-alone application (not activated EMPA)? I created a business rule in calc, Manager of a standalone version of Essbase (essentially copied the contents of a calculation script and saved in a new business rule). The rule completed successfully, however the RTP section is disabled when I tried to create a variable for this rule.

  
  

  

  Attempted to create a global variable, but could not find him under the knot, essbase. This means that by the RTP can be created only for requests that are active-EPMA? We are currently in version 11.1.2.2

  
  

  No, not in 11.1.2.2 you must be on 11.1.2.3 or higher, as says 11.1.2.2 ""execution prompt variables can be used in the planning of business rules. " "

• 11.1.2.3 Calc Manager does not open

  Hello gurus

  Just finished applying the corrective update to 11.1.2.3 to 11.1.2.1.

  Can connect you to the workspace and has been able to improve the planning of the applications as well.

  However, when I try to open Calc Manager by-> Navigate-> administer-> Manager of Calc, I get the following error message:

  Process default handlerAn error has occurred the result from the process server.
  ---------------------------------------------------------------------------
  URI: http://servername:19000/calcmgr/filterview.GetChildren.do
  
  Description: Syntax error-
  
  < ! DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional / / IN" "http://www.w3.org/TR/html4/loose.dtd" > ""
  < head >
  < title > Oracle Enterprise Performance Management System Workspace, Fusion edition < /title >
  < meta http-equiv = "X-UA-Compatible" content = "IE = Edge" >
  
  < / head >
  < frameset style = "border: 0px;" border = "0" frameborder = "0" framespacing = "0" line = "*" >
  
  < framework noresize scrolling = "" onload = "" src="/workspace/index.jsp?framed=true" >
  < / frameset >

  
  

  I checked the logs in the folder "D:\oracle\Middleware\user_projects\domains\EPMSystem\servers\CalcMgr0\logs" and

  
  

  < test "SELECT 1 FROM CALCMGRCONFIG WHERE 1 = 0" set up for pool 'calc_datasource' failed with exception: "java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist.

  «. >

  # < 3 March 2015 1:36:05 pm > < Info > < JDBC > < TELEAS121 > < CalcMgr0 > < ExecuteThread [ASSET]: '25' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KjWv6qBEOPCkZCADVr1KxVbb00000O > < 1425407765900 > < BEA-001128 > < connection for pool 'calc_datasource' has been closed >.

  # < 3 March 2015 1:36:05 pm > < Info > < Common > < servername > < CalcMgr0 > < ExecuteThread [ASSET]: '25' to queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <>< 0000KjWv6qBEOPCkZCADVr1KxVbb00000O > < 1425407765980 > < BEA-000636 > < resource "calc_datasource", "DEFAULT_GROUP_ID" active group Pool >

  
  
  

  Set up EMP Configurator and try to reconfigure just the database to the calc Manager.

  

  Sree-

• How to migrate EAS Business Rules for Calc Manager in 11.1.2.1 (without using EPMA)

  Hi all

  for the moment, we are on 11.1.2.1 and one more late upgrade scheduled to 11.1.2.3, use Calc Manager rather than the rules Business (EAS). Therefore, I would like to upgrade to business at Calc Manager rules, but without using EPMA (we would still use the classic Planning Administration). I read several documents and sites, but I was unable to find a way to do... Does anyone have a how or documentation about my problem?

  Thank you very much

  André

  P.S.: Maybe to make it a bit clearer: I won't spend 11.1.2.1 to 11.1.2.2. I would only use Calc Manager instead of business EAS rules 11.1.2.1 and I couldn't find anything that shows how or if it is possible to migrate from the business rules to Calc Manager (without using EPMA).

  You can change the method of calculation of the Manager of Calc application. I replied to your message in the Manager area of Calc.

  Concerning

  Celvin

• Concern of Calc Manager

  Hello

  
  

  
  

  In the version of calc Manager - 11.1.2.3, when I copy a business rule between applications in calc Manager comments in

  
  

  the code disappears.

  
  

  
  

  Any idea what could be? Or is some sort of bug?

  
  

  Thank you

  EbrauerP

  1. go to Shared Services in the original application. Take the Group of application corresponding to your request. Then, open the Types/Calc Plan Manager rules. Right click on the rule that you want to export, and then save the file. The exported rule should produce an XML file.

  2 return to Calc Manager and access the application target/rules and then to the right, click Import. Select the previously exported file.

  3. after importation, deploy the rule.