XSD type not to validate

Similar Questions

• Oracles impementation of the canonical xsd types breaks the OWL Compatibility

  We have a problem when the semantic manipulation models Oracle with OWL ontologies. We are losing the numbers xsd type information, so that what the triples, in that we have are not the same as the triples that we out.

  For example, insert the triples:

  < owl: Restriction >

  < owl: raise RDF: resource = "#hasParent" / >

  < rdf:datatype owl: minCardinality = "& xsd; nonNegativeInteger"> 2 < / owl: minCardinality >

  < / owl: Restriction >

  
  

  bring following answers on the query: SELECT * {? restriction owl: minCardinality? cardinality}

  restriction	cardinality
  _: b0	"2" ^^< http://www.w3.org/2001/XMLSchema#decimal >

  Read the Overview of semantic RDF graph, we see this passage:

  Duplicate triples are not stored in the database. To check if a triple is a duplicate of a triple existing, the subject, the property and the object of the triple incoming are compared with triple values in the specified model. If the subject, property and incoming object are all URIS, an exact match of values determines a duplicate. However, if the triple incoming object is a literal, an exact match of the object and the property and a match (canonical) value of the object, determine a duplicate. For example, the following two triple are duplicates:

  <eg:a> <eg:b> <"123"^^http://www.w3.org/2001/XMLSchema#int> <eg:a> <eg:b> <"123"^^http://www.w3.org/2001/XMLSchema#unsignedByte> 

  The second triple is considered to be a duplicate of the first, because "123"^^<http://www.w3.org/2001/XMLSchema#int> has equivalent value (canonically equivalent is) to "123"^^<http://www.w3.org/2001/XMLSchema#unsignedByte> . Both entities are canonically equivalent if they can be reduced to the same value.

  In other words, it seems that this behavior is by design, which puts us in a bind. To be consistent, OWL isor can not have restrictions of cardinality with decimal numbers. (See ) OWL Web Ontology Language Reference .) And if our ontologies are not NICE consistent, we cannot use the reasoners about it, and we must be able to do.

  You have any suggestions on how to fix this? We must be able to request templates Oracle xsd:nonNegativeIntegers, both using SEM_MATCH and through the Jena/joseki-SPARQL endpoint.

  Thank you very much in advance

  Can see you if use of the indication of GET_EXACT_VALUES might work for you? Below is an example in SQL. For use with Joseki, please refer to the post of Re: How can I specify GET_EXACT_VALUES to my Joseki endpoint?

  SQL > select cardinality$ rdfterm table (sem_match ("SELECT * {?}")) restriction, owl: minCardinality? cardinality} ", sem_models ("m1")(, null, null, null, null,' PLUS_RDFT = VC '));"

  CARDINALITY$ RDFTERM

  --------------------------------------------------------------------------------

  "2" ^ ^http://www.w3.org/2001/XMLSchema#decimal>

  SQL > select cardinality$ rdfterm table (sem_match ("SELECT * {?}")) restriction, owl: minCardinality? cardinality} ", sem_models ("m1")(, null, null, null, null,' PLUS_RDFT = VC GET_EXACT_VALUES '));"

  CARDINALITY$ RDFTERM

  --------------------------------------------------------------------------------

  "2" ^ ^http://www.w3.org/2001/XMLSchema#nonNegativeInteger>

  SQL >

• How to type notes or compose mail with 5s iPhone / iOS 9.0?

  Hi, I use iPhone 5s, and before that I have upgraded to iOS 9.0 there used a microphone next to the space bar button and I can talk to type notes, e-mail, etc. But now I can't find the little microphone, I tried to 'settings' and I tried google / Youtube... Help, please...

  "Everything in the settings" is not very useful to tell us what made you try. You enable dictation in settings > General > keyboard > turn on dictation. Is this one of the things you've done? You have an active data connection? By chance, are using a third-party keyboard? If so, try to switch to the installed keyboard.

• XSD is not in a valid state.

  Hello

  my client has added more than 3 operations in the WSDL file existing, so what I've done, I have modified existing wsdl and xsd according to the new requirement, it is error xsd is not in a valid state for the proxy service when I consume the xsd .i have tried ways.even lats I checked each solution of element.no.

  a sad, this is 2 days back, I developed the service by updating the latest wsdl and xsd, it was working fine unfortunetly, I deleted any workspace.

  I am trying since yesterday, no solution, help me please to get out of this problem as soon as POSSIBLE.

  Thnks

  Bala

  HI Bala,

  Can you confirm that your changes are persisted in the MDS?

  You can try to remove the MDS artifacts for your service deployment and redeploy your service.

  Antonis

• Blubrry podcast not to validate

  I have a flow in Wordpress help Blubrry podcast, but I can't seem to validate through iTunes.

  Here is the power http://blogs.mtroyal.ca/teachingstrides/feed/podcast/

  The audio plays fine in Wordpress, the image is the right size and I made are without spaces in the file names.

  Any help would be appreciated!

  The problem is not with food but in the download of multimedia file of your top of the episode. Subscription in the iTunes application works OK, and if you enter the URL of the media file in a browser it plays OK, but after a slight delay.

  However, there is a redirect 302 in place, leading to the same URL, but with https (secure connection) at the beginning instead of http. In addition, under test in the Terminal it displayed the content-type that results in text/html:

  curl - I - r 200-300 http://wwwacad.mtroyal.ca/adc/teachingstrides/promo_for_launch.mp3

  HTTP/1.1 302 found

  Date: Thu, June 30, 2016 17:12:48 GMT

  Server: Apache/2.2.3 (Red Hat)

  Location: https://wwwacad.mtroyal.ca/adc/teachingstrides/promo_for_launch.mp3

  Content-Type: text/html; charset = iso-8859-1

  the 302 redirects may cause problems with some clients - please see https://en.wikipedia.org/wiki/HTTP_302 - and it is very likely that the store is down, particularly given that the redirect does not work as expected in the Terminal. In addition, the use of https can be discouraged. I suggest to put the actual file at the original URL without any redirection.

• "File type not supported" error message when you import jpg files into my Joomla blog... I just updated to the latest FF of the old version. Help!

  I've just updated all my FF browsers to the latest version and now regret it.

  Can I go back? Security be doomed, because I manage a daily site and use jpg all the time. When I open Joomla to create my new assignments, the FF browser now blocks the download of all the jpgs on my web server. Safari has still properly download jpg files, but does not allow other manipulations of images (when I work in Joomla).
  (1) can I fix in FF
  (2) if not, can I go back to a previous v. of FF if I now v. 12?

  You have the option to update PVE? This thread suggests she could solve the problem: Joomla! - View topic - problem downloading photos in the JCE Editor. Another suggests to disable a different download option (but that means nothing to me): type file not supported - file: undefined. Extended image 2.0.2 Manager.

• Game type "not specified" remove the Windows 7 Explorer game.

  I've seen several forums around this subject, but none of them does not solve my problem.  I have a file in my Games Explorer classified as a type of file "not specified."  I went through several records, including "C:/users / AppData/local/Microsoft/Windows/Game Explorer' and 'C:\ProgramData\Microsoft\Windows\GameExplorer' that do not contain the file I want to delete.  Nothing comes up when I right click on icon, either.

  I found a forum with a link which has been said to have the solution, but the page just says "Service unavailable" page was:

  http://www.SevenForums.com/tutorials/42496-Games-Explorer-folder-delete-game.html

  If anyone happens to recognize this URL, it would be great if you could tell me what he said, except that I'm open to suggestions on other ways to get rid of this icon.

  System Restore solved the problem, I just had to try several times until I got just restore point where the icon has disappeared, but it didn't remove all the others either.  Now the icons under the tabs of Internet Explore are all screwed up (icons wrong showing upwards to the wrong sites), but I suspect that will disappear in time, otherwise I can reinstall IE.

  For those of you who read this message and to use steam, never, NEVER put a shortcut to one of the steam games in the Games Explorer. It won't work, it will take place.

• Function call to the C - Type not available library for one of the parameters in the Prototype of the function.

  Hello

  I do a work already done by others: implementation of a Wrapper to SQLite LabVIEW, I know how to do with .NET alas I would do that c, mainly for purposes of performance and my pointer poor knowledge is kinda make me stuck.

  Some information is kindly provided here:

  • http://www.SQLite.org
  • http://www.SQLite.org/cintro.html

  What I want to do is just to open a connection to an SQLite database (if not existing does not, the SQLite engine will create the embedded database and the corresponding file to save the data and everything). The function to perform the operation is indicated in the page below:

  • http://www.SQLite.org/c3ref/open.html

  It seems simple enough:

  int sqlite3_open(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
  int sqlite3_open16(
    const void *filename,   /* Database filename (UTF-16) */
    sqlite3 **ppDb          /* OUT: SQLite db handle */
  );
  int sqlite3_open_v2(
    const char *filename,   /* Database filename (UTF-8) */
    sqlite3 **ppDb,         /* OUT: SQLite db handle */
    int flags,              /* Flags */
    const char *zVfs        /* Name of VFS module to use */
  );
  

  However, I'm struggling a bit on the following type:

  sqlite3 **ppDb          /* OUT: SQLite db handle */
  

  And I'm not really sure what type to use when calling this function of LabVIEW

  Any idea, I guess it's really easy, but I'm not really used to have a type which is I guess the DataInstance but as it is not clearly explicted in the C library function prototype interpreted LabVIEW (InstanceDataType is logical but not sure if) I'm not really sure what I show in the screenshot is valid or not.

  My VI seems to work like a charm, but am not sure if I'm doing something wrong.

  Another prototype that I have no idea on the appeal proper LabVIEW is the close function:

  • http://www.SQLite.org/c3ref/close.html

  I would like to get this straight, usually a parameter has a name, right? but seems not:

  int sqlite3_close(sqlite3*);
  int sqlite3_close_v2(sqlite3*);
  

  Similarly no idea about setting up for this one... must be regarded as the free forum like the one calling this function is... but I don't send any object?

  Really confusing...

  sqlite3*
  

  I might sound really stupid, but if someone could point me to a few tracks, I'd be really grateful for that.

  Thank you

  Ehouarn wrote:

  However, I'm struggling a bit on the following type:

  sqlite3 **ppDb          /* OUT: SQLite db handle */
  

  And I'm not really sure what type to use when calling this function of LabVIEW

  This parameter must be an integer of size pointer, passed by the pointer. No matter whether it was signed or not signed. The SQLite library will allocate memory for you, then put a pointer to this memory in full the pointer location as you go.

  Regarding the close function, you must pass the same integer pointer, but this time he passed by value (because it is referenced with a single *, not two). There is nothing wrong with the documentation by omitting the name of the parameter. For the application of a function prototype, the parameter name is without important, since everything you need to know is the type of data. How the service chooses to refer to this setting internally is irrelevant.

• "The type not to force" when they'the same type...?

  Hello

  I have a NI 9213 (thermocouple) module attached to my CompactRIO. I created a VI in the target of my PC and tried to link a digital indicator with an Alias of e/s from one of the channels of thermocouple. However, my 'Run' button became a broken arrow and LabVIEW said: "FrontPanelDataController: Type does not compel." and "the control type does not compel with the variable to which it is linked."

  I'm sure that the source and the receiver are double types! I created a variable node shared the same channel and it could lead to the indicator without a point of constraint.

  Other strangeness observed: in the properties of the indicator data binding page, if I select "Shared Variable engine (OR PSP)" and click "Browse...". ", I can't navigate for all variables in the project. It shows the .lvproj file, but none of the modules or libraries. If I manually type a variable path, I get the error message. If I type in an invalid path, the flag becomes simply unrelated.

  What could be the problem? How to solve this?

  Details

  Controller: NEITHER cRIO-9204

  Chassis: NEITHER cRIO-9116

  Software: NOR-RIO 12.0 - August 2012

  LabVIEW version: 2012

  Thank you!

  Hi JKSH,

  This looks like an expected behavior for me.  The e/s Variable that you use does not look like it is using PSP to pass data.  This is necessary to use that bind to the option data in your project.

  Here's what you selected in the e/s Variable.

  

  Here is the address of variables, notice there is no reference on psp.

  

  Here's how I propose to perform this action.  Do a shared variable published to network, enable anti-aliasing to the Variable of e/s of your choice (in this case TC0).

  

  This is for programmatic access to the network shared variable, that I just created.  Notice how it ends in the PSP.

  

  Finally, we have our variable to be bound.  The only option we have to use would be PSP.

  

  So I guess what I'm trying to say is that, as far as I know, you can't link an indicator to a reference that does not communicate on psp.  Does that answer the question?  I'm on the right track or have I missed at the heart of the issue?

  You mentioned this execution in an earlier draft, however.  Could you describe the installation?

• D1370 "Scan type not the Remote Scan value... "Why this error when connected via USB

  Printer D1370 MF w / usb on win7 x 64 machine connection.

  I understand that when networked, I owe to the printer and manually press , then then before you scan using the software MF Toolbox on my PC and then must go to the printer once the scan is complete and cancel this setting manually before I can print or use other functions. What is total pain BTW...

  However, I also have a MF6530 and can scan directly from MF Toolbox without manually change the setting of the printer when connected via USB.

  So, I would like to connect one of my PC via USB for scanning to eliminate the requirement to manually configure the printer for the mode. But, when I do this I always get the error "type of analysis is not defined for [Remote scanner] on the device" even though I am connected via usb.

  1. I do something wrong when I try to scan via a usb connection that causes the error "remote scanner?

  2. that this has something to do with D1370 being a network printer. My MF6530 isn't a network printer.

  3 is there a manual for the software MF Toolbox? The manual on the installation disc is for 'Send email' and 'Store to Shared Folder. The manuals provided in the box do not address MF Toolbox. There must be a detailed operating manual provided by Canon for this program?

  4. What is the error Code 162,0,0?

  5. where is the complete list of the error codes for MF Toolbox.

  6 help!

  Hi monza.

  I know that this issue is frustrating and I'll be happy to help you.

  The new imageCLASS machines are designed so that you can select an option to scan the machine.  There is no way to set a default scan on this computer option.  You will need to select [Remote scanner] or [computer].  This is to ensure that your device correctly handles the scan project.  For this reason, the ability to program a specific mode is not available.

  Although an extra step to make, an advantage to choose the mode desired for a respective scanning can ensure that poor communication of scanner does not occur if it was programmed to a different mode.

  The 162,0,0, the error indicates the Toolbox does not detect the scanner mode "Remote Scanner.  Scanning is not supported with a connection on the USB hub, as the hubs can cause communication problems, trying to transmit data to the computer.  We recommend a direct connect between the printer and the computer.  Once you have connected the printer directly, perform the following steps and check if you receive the same error 162,0,0:

  1. Check that the MF Toolbox is closed on the computer and press the [SCAN] button on the printer.
  2. Select [Remote scanner], then press [OK].  The display reads, "remote scanner. Waiting in line... ».
  3. On the computer, open the MF Toolbox and select [PDF].
  4. Click the [START] button green on the window [PDF].  The machine begins to deal with the scan.

  Then I recommend to download and install the e-manual for the device to your computer.  It gives very detailed instructions on each of the functions of the machine.  The e-manual should be included in the manual on CD-ROM supplied with the machine.  If you are unable to access it from there, please click the link below to download the electronic Handbook:

  imageCLASS D1370 - Brochures & manuals

  I hope this information is useful for you.  However, if you need more assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).

• How to fix a download that is "a supported file type not or because the file has been damaged"

  I downloaded files from an e-mail to SAVE in the Documents and when I went to OPEN it with ADOBE READER, I received a message that "Adobe Reader cannot open this file because it is not a type of file supported or because the file has been damaged (e.g. He was sent as an attachment to e-mail and has not been correctly decoded.  I'm a novice at this and do not understand really that.  What can I do to fix this so I can play this file? Can you help me?

  Nope... I'm not confused.

  MP4 is a film format and has nothing to do with
  Adobe Reader.

  You need an application that can read a MP4 video file.

  The free VLC Media Player may be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)
  (the name of the file to download is: vlc - 2.0.1 - win32.exe)

  When you have installed... VLC right click of your MP4
  file and choose the menu... Play with VLC
  Media Player.

  Information on creating a file association...

  Right-click a file... in this case a MP4... and the
  menu... Choose... Properties / change button... Choose
  the program that you want to use (VLC Media Player) and
  Click on... OK / apply / OK.

  What does that make VLC Media Player default
  program for MP4 files.

  The next time you click left a MP4 file... VLC expected
  start and play the file.

  Let's recap...

  Since the MP4s are downloaded on the net...
  they are not attachments and my previous instructions
  on... File / save attachments... do not apply.

• How to open .zip files in windows media player? I get the msg file type not supported. MP3 files are in the folder.

  Hi I downloaded audio files that you want to create a playlist on windows media player to download to my mp3 player so I can be more mobile to study. When I tried to play on windows media player I get error msg-file type is not supported or the codec is not compatible with the player. They are .zip files. inside are the mp3 files that I need to listen to. can someone help me.

   

  Hello

  You need to open ZIP files, which are compressed to make it smaller, then use the content
  in the application appropriate - so if the audio or video content can use WMP.

  Compress and uncompress files (zip files)
  http://Windows.Microsoft.com/en-us/Windows-Vista/compress-and-uncompress-files-ZIP-files

  Although Windows has integrated ZIP, you might be more comfortable using a program
  with more features (and works with different types of compressed files).

  7ZIP - free
  http://www.7-zip.org/

  --------------------------------------

  More information:

  Using Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/help/Windows-Media-Player/using

  Getting started with Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Media-Player

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I need to use my keyboard to type not the screen about how keyboard can return to manual keyboard

  I have this type of manual not by touch screen how can I remove this

  Reach

  Control Panel, easy access

• Numeric keypad keys 7 and 8 letters type not giving way on Windows 7

  Please help me... im going crazy... my key pad digital 7 and 8 type it wrong... instead of numbers 7, 8 types a few multiple letters not giving meaning... it's something wrong with the mapping or what would it be?... other keys of the numeric keypad work well... Thank you

  Hello David,.

   
  1. did you of recent changes to the computer?
  2 have you tried to connect another keyboard (USB external keyboard) on this computer and check
  If it works?

  I suggest you to follow the steps in troubleshooting mentioned in the link below and check if it helps.

  Mouse, touchpad and keyboard with Windows problems
  http://Windows.Microsoft.com/en-CA/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01
  
  Hope this helps, please respond with the requested information and the status of the question to get help on Windows.

• AppModuleImpl methods of the class returns the custom class types, not called.

  Hi all

  Methods of the class AppModuleImpl custom types of class, not called when you access through back links.

  OperationBinding operationBinding = bindings.getOperationBinding("getInstanceNameO"); where 'getInstanceNameO' is a method AppModuleImpl returns a class serializable type.

  Any help will be appreciated.

  OI_testBean.goInstanceName_methodCallNew (OI_testBean.Java:99): this line is the call of method appmoduleimpl: OperationBinding operationBinding = bindings.getOperationBinding("getInstanceNameO");

  Looks like 'bindings' is null.

  How to retrieve variable 'bindings '?

  Where is the OI_testBean.goInstanceName_methodCallNew () method called?

  If this method is called from the method call activity, you create pageDef in his name and add getInstanceNameO

  Dario