Y510p problem with jack

Similar Questions

• Y510P problems with plug headphones

  Hello. Unfortunately, this is my first post on the forums of Lenovo.

  I bought Ideapad Y510P this week and here I first problem with it. This is a new computer, was only transported in the car, laid flat in his box. Today was the first day I tried connect headset.

  When I plug them in at bottom right part just works. The left side is all silent. When I try to hook them up slowly, only left side works until I plug them all way in and only the right side then gives sound.

  When I plug my headphones to halfway in (very difficult to achieve and the plug won't stay in all), both parties give sound properly.

  Tried it with 3 different working pairs of headphones.

  Check all the drivers (Realtek HD Audio) and it works. The work of speakers, wonderfully, only the headphone gives me problems.

  What could be wrong?

  I must say that I was pretty desperate.
  The laptop was taken instead I bought in and replaced by a new because it was within a week of purchase.

  The service said it was a problem "integrated", coming from the product being badly done.
  I wish I have a better solution for the Rangers, but the subject is now ready to be closed that I have a new thing.

• Problems with SLI on Y510P

  I have a problem with my Ideapad Y510P.

  It is said in the control panel Nvidia SLI is enabled. When I use it for intensive play however there is no load on the second GPU. It simply says that the GPU load is 0% on the secondary GPU and almost 99% on the main GPU. Im running the latest version of the driver (332.21) and I have updated the VBIOS mentioned in other discussions. Well, everything should work according to the NVIDIA software.

  I hope there is a fix for this already or that a person can look at the issue.

  What game? Not all games support SLI.

• Problems with my Lenovo Y510P.

  Hello Lenovo community!

  I bought my Y510P reconditioned 3 months ago and it had worked very well up until recently my laptop would just turned off and would not yet initialize for a certain period of time followed with my adapter it's a "pulsed" strange noise. I tried to remove my my laptop AC adapter and pressing the power on button, but it did not work. After 1 hour later I plug back my power adapter and the noise disappeared and it may start again, but with a strange event, my computer would be a smell of burning electronic and metal from the AC charger plug.

  I'm worried if it just my adapter is faulty or would it be a problem with my AC charger plug because it's the second time he has done that.

  your welcome, please make sure that the input voltage is the same amount that is stated on the laptop and secondly please keep me updated so that I know if your OEM charger worked

• Does anyone know what the cause some programs not being able to access the Internet? I had this problem with TurboTax and now with my Magic Jack.

  The TurboTax program told me that I was not connected to the Internet, even though I was and now my Majic Jack, who has worked 10 months told me the same thing.  I did nothing g to my computer except upgrades of Microsoft/Windows and I am at a loss as what to do.  Can anyone help?

  Hi CherieRadigan,

  1. are you able to connect to the internet successfully?

  2. facing a similar problem with other programs on the computer?

  3. What is the full error message that you receive?

  4. do you have security software installed on the computer?

  If you encounter a problem with internet connectivity to TurboTax and MagicJack program, then check out the links below to the Publisher of the software and check if it helps.

  MagicJack

  Error failed to configure magicJack / if please connect to the internet and double click here / Internet provider cannot be found. Make sure that you have an internet connection / unable to connect to the service provider

  TurboTax

  Connectivity errors

• Weird problem with headphones Jack Bootcamp

  I searched many forums / tried many things before coming here, but for some reason - probably for the first time I don't see my problem on Google.

  The question:

  Every time I put in the helmet, they show only disconnected in Windows on Mac OS X 10 with Cirrus pilots. Sound continues to play on the speakers. This problem wasn't there yesterday and randomly began today.

  Results:

  1. it is not a hardware problem: headset works perfectly on Mac.

  2. it is probably not a Windows problem: when I install Windows drivers by default, the headphones ARE recognzied (!) (this I do by uninstalling Cirrus and restart the Mac). Of course the audio does not play not (or through speakers or headphones) because these drivers are not used to a Macbook Pro.

  3. drivers are not exceeded - just downloaded software support of Bootcamp and re-installed windows.

  Conclusion:

  It is most likely a problem with the driver for Cirrus, which is weird, because I assume that there is already a forum about this if there is (although someone should be the first I guess).

  I have no idea what to do - Apple support cannot help, Cirrus doesn't have a lot of support and it is not a problem with Microsoft (I guess), the only solution I can think of is to find another driver, which I can't find.

  If anyone has a solution or even a certain direction to a solution as possible, it will be very useful!

  Found the problem: Windows does not recognize the headphones with 1 side does not, no wonder there is no one else with this problem lol.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problems with the Firewire Audio Interfaces

  I use a Presonus Firebox for all of my recording and playback. I just bought a new pc HP with Vista64 and I had problems with my audio since then. Symptoms include random audio dropouts, crackling sounds when you scroll through the menus in my software, no noise at all from windows media, no windows generally sound player. Everything works sometimes, but inevitably fails. Once the audio is de-energized my only solution is to restart the computer, and then it still doesn't work sometimes. I don't understand. My last computer was a couple of years and built the hand. It worked perfectly with this unit until the motherboard is dead after what I bought my new HP desktop with terrible results. The main difference between my pc and this one is that I was using XP and XP64. However, I have the right drivers for the home and the computer recognizes it but I can't operate consistantly and correctly. This new HP has more power than my last, and more then enough power for my needs recording software. I would like to know, I've been recording music on PC for 8 years. Any advice would be welcome.

  I am now convinced that the long nightmare is finally over. I tested my home over and over again with no failures. Record and playback midi seem to work perfectly. Here's what I did:
  
  1 optimized my computer for audio streaming using the guide written by sweetwater.com.
  
  2 uninstall all the drivers from Presonus and all software, including the removal of all PreSonus files on the registry using the instructions provided by the technical support of PreSonus.
  
  3 disabled WLAN and then physically disconnected from the motherboard.
  
  4. my computer has two firewire ports. The front port was connected to the motherboard via a short cable. I physically unplugged the cable from the motherboard.
  
  5. I bought an Express(1x) PCI firewire 400 card with a Texas Instruments chipset. The exact brand is inner Pro PCI Express(1x) 4 port 1394 a. The firewire card is a power port. I plugged the power jack on the same line, connected to the DVD player. I don't know if it's important, but I'll try to document EXACTLY what I did. The firewire card requires no driver work. It came with a disc with a B.S. video editing software I was not installed.
  
  6. I turned on my computer and disabled the built-in firewire in Device Manager, leaving only the new active firewire card.
  
  7. I installed the drivers from the Firebox from the original disc supplied with my unit (v1.20.0). I had good results from these pilots in the past that may be because I use XPsp2.
  
  8. I have connected the combustion chamber when prompted to by the installation software.
  
  9. rebooted the computer with the combustion chamber connected and everything's fine.
  
  By the way:
  
  The inner firewire card cost me $ 30.00
  
  My computer specs are:
  HP a6745f desktop
  Dual core AMD 5050e 2.6 GHz
  XP sp2
  GigsRAM 4 (3.25 because I'm on XP)
  
  If you are confused in the store on the question of whether a firewire card uses a Texas Instruments chipset. Try to get a glance at the map. You should see a chip bearing the logo of TI: the State of Texas, w / Ti. YeeeeeeeHawwwww!

• Qosmio G10: problem with Port Monitor

  Hi all

  I have a Qosmio (G10), but I have a problem with the functions of 'Port Monitor-in '. However, I have connected my computer cassette player output ports "port monitor" with the proper cables and jack and get good sound but get no video.

  where I go wrong?

  Thanks in advance.

  Hello
  you need to go to "start / all programs/toshiba/utilities/photo Enhancement utility ' and then click 'monitor input parameters'"
  choose s-video and monitor-in.

  Good bye

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.

• Problems with Microsoft Office programs

  Original title: not interested in these community events

  I bought 2013 on the easy payment plan, and it's the only thing that is easy. Heartburn, problems threatening patience continues to accumulate.  I can't believe that when I installed windows 2013, my 2010 trial program has expired and none of the programs will open in the new program.  I used Microsoft 3.0 to 5, 8, professional and xp 2010.  Each unique program would automatically begin your files under the new facility.  With this program, unless I'm missing something won't do anything until you open each file - and you have to go through an extremely stressful process to send the file to the computer, open a program and expecting results.  It just has to be wrong.  When I receive an attachment document written in a Word, I can't open it.  I have to save it and go through get its opening in the downloads. Sometimes it works, sometimes it doesn't.  Someone at - it a copy of 2010 or 2007?

  In addition, why can't I talk to the geeks at Microsoft and get a response?

  Hi Jack Burkett,

  I understand the problem you are experiencing. It seems that you are having problems with your office programs.
  Please visit this link for additional assistance.
  Thank you
  Anne_Q.

• HP OfficeJet Pro 6978: There is a problem with the printhead

  I am trying to install my new printer.  Turned on, the screen displays this message: "Is there a problem with the print head."  I have downloaded all the software and drivers, installed ink cartridges that came with your printer, followed the troubleshooting online and still the message will not go away.  I registered the product and tried to contact the HP support, only to get the message that this device is no longer supported by the HP BRAND - it's NEW!  I can't find phone # for support, so I'll try this forum.  If no help, I will just return it.  Very frustrating.

  As it is brand new is not same Jack with it. Take it for a full refund and buy something else.

• Issue of 'no networks detected. Problems with the AR5BWB222 driver for WiFi adapter. Help, please!

  Hi all

  I need your help!

  then a few days ago my wifi started playing on my acer Windows 8 V5-552 and I have decided to update the driver for the card. I did this by unistalling and re-istalling the driver for the Atheros AR5BWB222 map I downloaded from this site acer very (it turns out it's the same version), now I have no WiFi connection at all (I am currently using ethernet cable but I need to be mobile around the House!). Troubleshooting does not help and said "there could be a problem with the driver for the WiFi card" and when I click fix problem there is no NOTHING (why did even give the option?). Did a system restore and that didn't work because of my antivirus and there still nothing when I turned antivirus off the coast. Then I read a lot of forum preveous questions on this driver and no solutions helped, maybe because everything is last year.

  I really want to avoide a factory reset as I have some programs here that will be very difficult to acquire again.

  If you're still here after my speech, I am greatfull and also want your knowledge and advice about this superior! Please help me!

  What antivirus program you are wrong with turning off? I know that some may be stubborn. If the AV program refuses to turn off this feature with a selective startup in MSCONFIG, then you can try to uninstall it completely in the PANEL. Then try to restore to the previous new date

  Jack E/NJ

• Problem with wag160N router wireless

  Hi all. Sorry for the typos etc I am new in the forum :-). Please, if the subject has moved to another subforum do it.

  So, here's the problem: last week, I bought the WAG160N wireless-N adsl2 + modem router (version 2) and yestreday I formatted my laptop 2, so today I decided to install a new one.

  I work 2 hours on it now, but still I can't find a solution. I started with the first cd, as required by the guide. Everything works well until the installation wizard step that attempts to connect to the router. At this point, he's looking for 5 minutes and then he said that he is not able to communicate with the router and wonder to check the connection again. I connected everything as it should (the gray wire of telephone jack to the socket of the router that says DSL, cable - ethernet - yellow of Gate 1 of the router ethernet for the laptop and then the AC/DC to the router and power.) I click next to the installation wizard, then he said to the power on the router... I do it and it checks then 5 minutes and again, he says that can't find it and tell me to double check and the story goes like this. I made 6 - 7 times but nothing. I also used the netwotk magical Wizard that was installed to fix the problem (because it recognizes that there is connection problem), but is not able to set in! What should I do? The ISP said that they don't sell Linksys products for their stores (I do not know the ISPS work on other countries, here they sell routers, adsl packs ect in their store) so they can't provide me with support. Can someone help me? Its the first time I use a linksys for me product and I don't know how to install it without the cd.

  I use windows vista pre sp2 on two laptops.

  I must also say that I have no problem with the ethernet connection the baudtec my ISP gave in the pack, that I bought when I activated my ADSL (2 years ago). IM connected with it now to view the topic.

  Sorry for my bad English and im sore right now that I can't think of what other info you might need, post and I will answer you.

  Thx for reading.

  Hello

  Connect your device directly to your pc via ethernet cable.

  Try to find the ip address of your device using the arp - a command

  Try to ping your router/adsl with address (192.168.1.1) ip of the device. u should get a response, if no response then in your pc check the LAN connection properties and enable DHCP.

  If you get always no response to ping the device, try and set an ip address in the range (192.168.1.1 or whatever your ip devices). Now, try to configure the device to cd Wizard help.

  Correct me if im wrong.

  Concerning