[Y580] mSATA problem :/

I have installed on two HDDs Y580. 1 TB HDD and SSD 120 GB (Kingston SMS200S3 / 120G). On both discs, I have Windows 7 x 64, but I only use it on the SSD. Yesterday, when I switched the computer blue screen appeared as soon as Windows starts to load. Blue screen also appears when I want to boot from the HARD drive. After removing the SSD system starts normally.

Blue screen:

CACHE_MANAGER

STOP: 0 X 00000034 (0 X 0000000000000107, 0 X 000000000000, 0XFFFFFFFFC0000420, 0 X 0000000000000000)

Now it only works on Windows, and only when the SSD HDD is not inserted.
When I put the SSD drive, ALWAYS have a blue screen. How is trying to turn the system on an SSD, because I try to turn the system on the HARD drive, as you try to run the installation of the windows 7 with memory stick, DVD, OneKeyRecovery... ALWAYS! BIOS detects the drive, and I know it works, because if I run a Linux LiveCD I can browse the contents of the SSD. Any ideas...?

I solved the problem. Linux LiveCD, I moved the SSD HARD drive, then using
another Linux format the SSD drive and installed Windows 8 from a USB flash drive.
I did have to format the HARD drive, or delete.

Tags: Lenovo Notebooks

Similar Questions

  • Y580 mouse problem

    Hi people,

    I came across a strange problem with my Y580. I recently needed to re install Windows 8 since 8.1 is not working on my Y580, or at least the WiFi does not work. Back to Windows 8 I have re installed all my drivers and almost everything seems to be working.

    What does work is my touchpad. Well, it strives to move the cursor, but I can't make gestures and when I scrolling with the touchpad, there will be a few lines, and then when I stop scrolling to happen maybe another 6 lines on its own - very frustrating.

    I tried to uninstall the drivers and reinstall them several times. I'm at the stage of ideas! One thing I've noticed, however, is that under "Mouse" there is no 'Synaptics' section at all. I should have something of the kind?

    I appreciate the help I can get.

    Thank you

    Very well. So I found a resolution to my problem.

    It began with the suggestion to "Unistall Synpatics Driver" of the control panel. I went into the menu "Unistall Program" and chose the Synaptics package manager. It would allow me to open because if cannot find the appropriate files.

    I am running a 64 GB Msata with a 750 GB HARD drive. so all I had to do was take the Synaptics of Program Files folder on the D: drive and copy it to the C: drive. BAM, everything started working!

    I want to thank everyone in this thread for your support! I hope that I have no more hiccups which is as easy to fix as this!

    Consider this resolved!

  • Y580 mSATA will work with 6 GB/s speed?

    Hello

    According to Y580 Manual:

    SATA controller: serial ata, sata 6.0 GB/s, integrated into the chipset

    As it is said, SATA interface can work with 6.0 GB/s, but mSATA can work with this speed too?

    I need to know, because im afraid that I'll buy a 6.0 GB/s mSATA SSD and it works with 3.0 GB/s.

    Thank you.

    It will of course. The Msata slot is a sata3 (6 Gb/s) and the Bay 2.5 "is a sata 2 (3 Gb/s).

    I have a Crucial M4 installed in Msata slot. It's the 256 GB model. He gets of the readings all about 450-500Mbs and writes at about half that speed. I noticed different benchmarks give results different tho.

    Do not believe what the manufacturing, the speeds are, check with someone who actually put benched them.

  • Y580 mSATA speed

    Hello world

    I recently bought the new lenovo laptop Y580, and I have a question that I couldn't find the answer to. I was wondering what is the connection speed for the mSATA slot. I know that the normal SATA hard drive connection is 3 Gbit/s, but I was hoping that the port of mSATA is 6 Gbps, what makes a big difference for SSD. If anyone can answer this question I would really appreciate it.

    Thank you

    Taylor

    Hi taylor,.

    According to the manual, it does.
    SATA controller: serial ata, sata 6.0 GB/s, integrated into the chipset

  • X 220 - boot from the SD slot?

    I have created an agent Acronis bootable on a spare SD card and hoped I could boot from it, as you can from USB key, since, like most of the machines I guess that the SD reader is connected internally to the USB bus.

    However, when I press F12 at startup to select a different boot device, it does not recognize the inserted, but for this, a USB SD card.

    I currently 1.16 BIOS, I was wondering if those with 1.19 BIOS (which sets the startup mSATA problem) could check if they insert a SD card and press F12 during startup if its recognized as boot device.

    Thank you

    The internal SD card reader is not a boot device.
    It is connected to the PCI-E bus (for best performance, I think, it showed much higher than average external), which means the BIOS could not access it as commom internal/USB drives (mSATA is a new category but with a new interface of essentially internal training).
    Even the BIOS might recognize, the software on the card needs driver for the card reader, or they simply not load because they cannot access their own media.

    If you need to use a bootable SD card, use with a USB port card reader. Mass storage device standard devices commonly are bootable.

  • Add mSATA to Y580

    I had a problem adding mSATA my Y580.

    I've successfully added in the system, but I can not boot up to windows. The thing can be seen in the BIOS, and I put my HARD drive to be the 1st boot. Now, once that windows is about to load I've always had a blue screen.

    Any help is appreciated.

    Thank you.

    the only solution that worked was restoring the old backup to a new msata. This means making the image of the existing installation of windows in the new msata.

  • Y580 - do I have to install a 256GB SSD mSata instead of the 32 GB one?

    Hello

    I bought a Y580 with 750 + 32 GB SSD. I want to buy a Crucial M4 SSD mSATA and install it in place of the 32 GB one.

    Should what additional things I do this? Should I just covers or padding for her? Will it screw? In addition, it would be possible for my to install a new copy of Windows 7 on SSD?

    Would be really helpful if someone who's done this before post some links to the material I need.

    Thank you!

    For the size of the screws, refer to this topic
    http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/Y580-screw-size-that-secures-wireless-adapt...
    I'm not sure but I think that all the msata ssd are not the same size.
    For the installation of OS on ssd there was no problem because the size of the ssd 256 GB, which should be more than enough.
    Just to make a note, I want you to know that you can make use of the 32 GB ssd so by merging both the ssd and HDD by using fast disk. For this, you need to install the os on the ssd and join the readers. Read this document for more information
    http://www.Google.co.in/URL?SA=t&RCT=j&q=RapidDrive.PDF&source=Web&CD=1&CAD=RJA&ved=0CDQQFjAA&URL=HT...

  • How to install msata in Ideapad Y580?

    Can anyone provide a step by step instructions how install the msata ssd in the Y580?

    I got my lenovo Y580 with a 1 TB HARD drive and I want to add the ssd msata for caching purposes only.

    Thank you.

    THIS IS APPLICABLE ONLY IF YOU ARE CONFIGURING YOUR SSD AS A CACHE CONFIGURATION.

    The msata SSD used is MyDigitalSSD 64 GB 50 mm Bullet Proof mSATA SSD - MDM-5064.

    I read a number of threads in the net regarding installing the msata SSD in their Y580 Lenovo. Intel Rapid Storage Tech (TSRI) does not work and it is not applicable to Y580, because the "Accélération" function is missing.

    Here are the steps below:

    -backup all your files and create a bootable disc just in case where it will fail.

    -Install the msata in the slot. You can access at the back of your laptop by opening the cover 2 holes in the back.

    -set the bios to AHCI and not compatible.

    -Start windows.

    -Download the software "VeloSSD" trial from softpedia 2.0.0.7 and do not update to 2.0.1.1 or newer version. Note that the velossd 2.0.0.7 works well with my system. However the latest version will prompt me with the error. I have already asked the support for this software because of the problem I'm having.

    -start and configure the software, but the limitation of the software is only up to 32GB. However, when you buy it for $9.99, you can set a larger cache size.

    -FACT-

    Now with my current setup of Y580, I can boot windows 7 within the 35secs from optimizer to start EA.

  • Y580: OS install on new mSATA SSD disk HARD + mSATA SSD config

    Hi guys,.

    I was wondering if anyone has done this? I have the 1 TB HDD + 32 GB mSATA config, but I want to install a new mSATA SSD possibly of 128 or 256 for my operating system and applications. I heard there was a problem with the removal of partitions due to Lenovo Rapid Storage. Has anyone successfully circumvented this?

    I guess that separate readers via these instructions http://78.9.150.202/pub/RapidDrive.pdf
    then saving them, putting in the mSATA SSD again and do a clean install should work.

  • [Y580] SSD - mSATA vs SATA

    Hello

    I have a Y580 comes with the 7200 500 GB HDD. I think about adding 120GB SSD, but there are 2 solutions:

    1: buy a new mSATA SSD and add in the free space inside the laptop (from what I remember, there is enough room for it)

    2nd: buy a new SATA SSD and add it instead of the actual HARD disk (which I'll use an external enclosure to external hard drive).

    We suggest to you? Is significantly faster than the mSATA SATA? It is always worth to carry an external hard drive just to use the SATA SSD?

    What model\brand advise you?


  • Y580 OneKey Theater + NumLock problem

    Hello

    I recently did a clean install on my new SSD and now I can not find driver OneKey Theater for Lenovo Y580 Windows 7 x 64. Any ideas where I can download it?

    Also my NumLock key does not boot when I start the operating system. It is not because of the system because registry numlock is set to its 2 ordinary (init at startup) and Lenovo BIOS is really poor, so I can't set up inside her. Any ideas, Tips how to operate? It becomes quite boring.

    Thanks for any answers in advance.

    Simon.

    Interesting P.S.: I had to apply my warranty because my keyboard was damaged when I bought the laptop, so I contacted Lenovo Support and I created a new service order. The operator asked me what is the problem then I said: "my keyboard is damaged and numlock does not start at the start of my operating system." His response was: "I don't understand, if you are able to squeeze and turn it on, what's the problem then? I guess I don't have to explain why I gave up to convince that, for me, it IS a problem and a bit boring. I use a password number

    Here you go

    http://support.Lenovo.com/en_GB/downloads/detail.page?docid=DS028050

    John.

  • Fresh Y580 Windows on new mSATA SSD

    Hello

    I have a question. My OS works on HARD drive, because I don't have a SSD, only the standard HARD disk. I recently bought the new mSATA SSD and now I want to install windows 7 on this new album. I have the OEM version of windows, so can I install new own edition windows Home premium and activate it with the current code? After that, I can download and install the drivers myself.

    I have already created OneKey recovery DVD with the factory settings, just in case.

    It will be nice just install new win and activate it with the existing code, but I've never done this before.

    Thnx for response.

    Hello
    Yes, you can do it. The only problem, which some people have faced is dual-boot. Sometimes, the two storage devices agree when each of them contains an operating system that can lead to errors. It is not important that you would face this, but I've mentioned just to tell you, because you know that beforehand you can meet it.
    Another thing, activation is that the key to COA (certificate of Aunthencity) on the back of your laptop does not work directly. You must contact microsoft to obtain a product key for time to use at this time.
    Ask if any clarity is necessary.
    Concerning

  • Graphics problems Y580

    Hi, I just bought a Y580 with the nVidia gtx 660 m a couple of weeks. He ran great and I'm very happy with it, except for one thing, the graphics card automatically downclocks itself by about 430 MHz (more than 50%) when the laptop is not plugged into a wall outlet. This makes it almost impossible to play games when it is not plugged, which is one of the main attractions of a portable game. Also, I know that this is not a problem with my particular laptop, because my friend has the same laptop and its doing the same thing. I'm sure this has to do with energy saving, but it is not necessarily a huge factor to all users. If anyone knows how to disable this feature for energy savings, I would really appreciate the help.

    Thank you, Taylor

    Hello firefightsquad,

    There might be more opportunity than the GPU downclocking when its battery on.

    1. power save as set out at the BIOS level.
    2 reduce the power absorbed by the GPU to ensure it has enough 'juice' to power the CPU, LCD screen and other facilities you might have plugged into the USB port. This is to ensure the stability of system voltage.

    I understand also that there could be some software to prevent strangulation however I would advice not to use these software as its not tested by the development team.

    I hope this helps.

  • Y580 video driver problem

    Having a problem with the graphics card from Nvidia in my Y580 on 64-bit Windows 8. The Intel card looks very good and functional. The Nvidia card appear in Device Manager as "Microsoft Basic display card. I tried to download 320.18 NVIDIA and Lenovo 306.97, but they both say "this graphics driver cannot find compatible graphics hardware. I tried manually updating graphic map of base in directing it to folders with extracted video drivers. Still nothing. Any ideas?

    Please close this topic. Update of Windows and rebooted. Card came back as usual.

  • Maximum size of mSATA SSD in ideapad Y580

    Hi all

    What is the maximum size of mSATA SSD that is supported by Y580 ideapad?

    125 or 256 GB?

    What?

    Thanks in advance.

    Welcome to the community!

    I don't think that there is no constraint of size on the mSATA connection in your pc. the only constraints are the sizes of SSD and your wallet.

    I have not seen a larger than 256 GB yet and that's what I have in one of my machines. very happy with it.

    Cheers.

Maybe you are looking for

  • I don't want to move to the new tab immediately when I select text and search it from the context menu.

    When I select text and right-click on it and looking for it, the new tab open and switched to immediately. I don't want that. Instead, I want to stay on the page that I am and don't want new tab to switch immediately.

  • Tecra 9100 - problem BIOS update/restore

    Hi all: A few days ago, I (declining misguidely) tried to update the BIOS on my Tecra 9100. Now on startup I get the message "BIOS (Block1) is damaged! (Call the repairman). Technician: Place the maintenance disk in the drive and press any key when r

  • Back to Vista

    Hello. I've got this pavilion. Initially equipped with vista OEM. I have upgraded to Win 8, but marry to have a terrible time, adjusting, if I want to go back to Vista, that she was very happy with. Now, it's not that easy, leading the "Restore defau

  • How to make knot faster formula?

    Hi all I am trying to identify a known model of the Spectra peaks in a code from Labview real-time data collection.  My data collection occurs on intervals of 50 ms (20 Hz).  Unfortunately, my analysis routines take ~ 160 ms to complete, and for this

  • a7ii modes of viewfinder (studio shooting)

    Hello! How to set the mode viewfinder sony? I shoot in studio with strobes, so ISO 100, f 16, which makes the completely dark viewfinder. And I need to see what exactly I'm shooting and where I focus. How viewfinder show not the simulation of exposur