Yeti USB and output mapping does not...

Similar Questions

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• USB and ext.hd does not, but the mouse is?

  Windows Edition home premium 2
  Acer aspire 5930 portable

  A few days ago I tried to connect an old usb that worked for 2 weeks with no problems... The computer says there was an error on the disk, then windows Explorer froze and had to reboot.  Later I "fixed" error, after many gels, but still the usb wouldn't work.  I ended up formatting the disk.  Although a still takes a long time to open and recognize the usb, windows Explorer.  My mouse is very well (connected to a port targus 4usb thing), my printer is fine.  All my usb and hard drives refuse to connect to the computer.  USB device manager says they are all "unrecognized devices" yet less than a week ago that they were all works well without any problem.

  Usb had some .f90 (fortran) files relating to certain University evaluations, excel (including some activated macro for vma), power point, word, and pdf files.
  It seems that all of my USB with fortran files most of the problems, but they all had some one way or another.

  before you say MY FILES to UPDATE... ILS ALL ARE updated TO THE FULL they may be... This is what I did the last few days.  In addition, as I'm using a proxy, this auditor boring device DOES NOT WORK on my computer.

  Also when I try to format or delete the files from fortran, it comes up with the error:
  0x8007045D i/o device error
  any ideas?

  Thanks in advance

  Hi Alexander,.

  1. what format did you try? What is a NTFS format?

  Since it is a recent issue, you can try to perform a restore of the system to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Desire x 2 Dock USB and card SD does not work

  The USB port on the left in my dock Envy keyboard x 2 has stopped working. Whenever I anchor the portion of the Tablet for the keyboard, I see an error message "USB device" unrecognized in the taskbar. In addition, displays an 'unknown device' Device Manager, listed under the key "other devices."

  Also note the card SD of Dock is doesn't work the same way. Some cards are recognized so that in the past he appeard as USB/removable disk device.

  I tried to reinstall Windows, reinstall all the packages in a driver from the web, etc. Nothing works. A few times, I was able to use the port or card reader after plugging in the tablet. However, they invariably become non-functional the next time I log out/dock the tablet or restart the system.

  I am quite experienced professional Windows support with thousands of hours of creation of hardware/software solutions around Microsoft platform. However, I am at a loss as to why I can't get this device to be recognized. All other Dock - right USB, HDMI output, keyboard and trackpad devices - work. The problem seems related specifically to the left and some hub USB root supports it and the SD card reader.

  FYI, I'm a stranger for months, making it virtually impossible to send the diagnostic/repair unit. I hope that there is a hotfix for that and that someone who reads this will have a suggestion on how to proceed.

  Thanks in advance!

  RCK

  Well, in a bizarre resolution to the issue, the dock has decided to start working again. Don't know what I did, but I suspect it had something to do with the UEFI settings stored in the CMOS. I searched update utility for BIOS Insyde Software documentation after witnessing of the docking station to return to life temporarily after re-flashing the BIOS. I found a setting in the platform.ini - ClearCMOS file - and I flipped it to '1' and re-flashed to see what would happen.

  Nothing changed immediately, however, the next day I was invited by Windows Update to download the latest definitions for Windows Defender. When he was done, he prompted me to restart, I found strange as the Defender updates don't usually require a reboot. Then I noticed the "Windows Update" start screen, while the unit has been reset, indicating something was more than just a simple refresh definitions Defender.

  Yet, I do not think anything of it and continued by usual until I noticed something weird: when I re-docked the Tablet I heard the familiar "donk doink, dink" tones. I did a double-take to make sure that nothing not hanging off one, working USB port (right side - it was empty) and then frantically connected to see what was going on a. To my surprise, the USB error message was gone and I could see once more the content of my 64GB SD card into the slot in the dock.

  I took a screenshot of the Device Manager just to have a reference of work to see how it * should * look, then held my breath and detached from the tablet. I waited the Plug & Play tones, which indicates the docking drivers, had unloaded, checked device (no sign of the USB hub) Manager, hold for a count of ten and prayed while re-docking of the tablet. Yet once, the PnP tones shot and Explorer opens a window on my SD card.

  Still not convinced that the "fix" would stick, I took the next step and restarted the machine. Again, everything was present when the system is back to the top and the procedure of disconnecting/dock worked as expected. My last test was completely power off the unit, wait for half an hour and then restart. Still works. In a last time, I checked the system event log to see what might have been for this mysterious Windows Update. The entrance to update itself mentioned only the definitions of Defender; However, I found several messages from the Installer service talks about the different status updates of Windows on "Absent". Very strange.

  Anyway, it's been 36 hours and I continue to check to make sure that the dock is still working. So far so good. I'll feel better as soon as I spend the weekend, but for now I think that the problem is resolved.

  As for what caused, and also what might have finally fixed, I guess this will remain a mystery. Could Defender blocked a significant update that was lit green subsequently after the update of definition? Or maybe my tweaking of the BIOS update utility. Trigger files INI Windows re-installation of some critical updates?

  Who knows? And frankly, who cares? I'm just glad to have my dock that is doomed to return!

  RCK

• Satellite A300 - dvd, usb and card reader does not work

  Help needed please.

  Have a laptop Satellite A300, running vista.

  Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it. The card reader can't find anything on the card (and Yes, the card was full.)

  The usb scanner is recognized as an external memory card and the other usb port does not fuction.

  I have not installed or don't remember changing of settings or do whatever it is the habit.

  Any help or thoughts would be appreciated.

  Hello

  Your ad is very confused.
  > Until a few weeks ago everything good, then noticed the cd did you not recognized and disk in it.
  Well, there are several reasons for this; It would be possible that the inserted disc is not completely compatible. Try different drives from different manufacturers.
  It would also be possible that the STRANGE laser lens is dirty. In this case, you might clean using a cotton ball and alcohol tip. In my case it helped.

  > The card reader can't find anything on the card (and Yes, the card was full).
  Did you use a compatible card? The laptop runs these cards:
  8MB - 2 GB SD card
  SDHC - 4 GB card
  -16 MB - 2 GB xD Picture card
  Memory Stick - 8MB - 256MB
  Memory Stick Pro - 256 MB - 2 GB
  MultiMediaCard - 8 MB - 1 GB
  miniSD (with SD adapter) - 32 MB - 2 GB

  I recommend also to format the card and to copy files from computer, and then test this.
  You can also reinstall and update the driver for the card reader controller...

  > The usb scanner is recognized as an external memory card
  Can't believe that you must use a scanner software (must be provided with the scanner) and have to test this unit. By the way; for the most part a scanner driver must be installed in order to use this

• USB and CD-ROM does not not on laptop HP with Windows VIsta

  I have a laptop HP with Windows Vista Edition Home Premium and I've encountered a problem:

  first of all, a month ago, the CD has stopped working. I can see the CD drive (: E) in the computer but it does not read any CD or DVD I inserted in it.

  Secondly, a few days ago the same problem happened to my USB (all 3 of them) ports. I can charge my phone/mp3 player but I can't download photos from my camera or music. I always get a message that says:

  "Unrecognized USB device".

  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize... »

  I tried a solution proposal (to unplug the laptop and the re - connect after some time), but does not work.

  Also, I did a scan (start - all programs-accessories - command Promt... and after analysis it I got this message:)

  Windows resource protection did not find any breach of integrity.

  If anyone knows what to do, help me please.

  aaaaaaaaaaaaaaaaaaaaaaaThank you.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ·                         http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Usb and Ethernet port does not work after update of windows 8.

  Hello

  I have a new HP laptop, and two days later the window updates automatically and my USB and Ethernet port stopped working. I returned it and got a new laptop and it is same thing. every couple of days that he update and refresh back to the old settings without losing my documents. I can't keep install my apps every two days after the update. Please let me know what I can do to update without having this same problem. If there is anything I can do so I have to return the laptop.

  Ben.

  Hi Ben,

  You can install the Windows updates manually by changing the settings of Windows updates.

  1. Open Windows Update in Control Panel by dragging it from the right edge of the screen, typeSearch (or, if you are using a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clickingSearch), get into Windows Update in the search box, by typing or clicking onsettings and then type or by clicking install optional updates.

  2. In the left pane, tap or click change settings.

  3. Under important updates, click the following option:

     Download updates but let me choose whether to install them.

  4. Under recommended updates, select the give me updates in the same way I receive important updates recommended , and then click OK.

  Manually install the Windows updates and find the problem causing the update.

  I hope this helps.

• Import and export of the OPA and Siebel Mapping does not properly.

  Hello
  We created OPA attribute and Siebel mapping fields under administration - policy automation > mappings in our development environment. However, I am able to EXPORT mappings to XML format. But when I try to IMPORT the mapping on the test environment, I get an error "'Attribute name' field is." whose value is more than 50 characters
  
  When I dug deep in the present, I found this level column length is 75 CHAR type and however on the component business integration component (e.g. Poliy Automation) length was 50. I changed the length of BC and IO level synchronized. IO/IC now shows length 75.
  Still, if I try to import XML on the test environment, I get error "'Attribute name' field is that the value is more than 50 characters."
  
  Any pointers/direction would help a lot, because we have about 2K attributes to migrate.
  
  Published by: 923416 on March 26, 2012 09:52

  A few things to say:

  * This has been raised as a bug and will be fixed in the next version of the Siebel connector.
  * I have reproduced this problem and fixed by the following method:

  1 open the object of integration "Policy Automation" in Siebel Tools
  2. Select the integration component 'Policy of automation attribute Mapping' and select the fields component integration
  3. change the length and the outside length of the 'Attribute name' field of 50 to 75
  4. change the length and the outside length of the 'Field name' field of 50 to 75
  5. compile all projects that begin with 'policy Automation"(just to be safe).
  6 stop the siebel Server
  7. copy the new .srf file compiled in step 5 above
  8 restart the siebel server.

  Once the siebel server is rebooted, you should be able to export and import mappings from attribute names and domain names longer than 50 characters.

• Satego P100-10F: Windows XP Lan, usb slots and the sound does not work

  Hello

  I have problems with windows vista, so I checked the forum to get information on the windows xp installation.

  I downloaded the drivers windows xp since the P100 Satellite (pspa6e), my only problem is that the LAN, usb slots and my sound does not work.

  I hope someone has a good idea for drivers or to install another driver I have sound and LAN on windows xp.

  Ty and Greetz

  See European driver of Toshiba.
  Here, you can try to install several drivers of different portable Satellite P100.
  Try all series.
  Fact is that some units of the Satellite P100 and Satego P100 series were delivered with the same features.
  Therefore, it should be possible to use the unique drivers of these series.
  Check all.

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• Tips on how to get attached with Nikon D810 and Lightroom - I tried with the uSB cable but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if it has pictures on i

  I tried to use the uSB cable, but Lightroom does not recognize the camera. My memory card has no images on it that I read somewhere that it can slow things down if she has no images on it

  If you use Lightroom CC / 6 on a Mac OSX El Capitan you must update to the latest version of CC 2015.4 / 6.4. Problems with Nikon capture home has been fixed in the latest update, the lis below.

  Lightroom Journal | Tips and advice straight from the Lightroom team.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Recovery of the Internet and the Touchpad does not

  Hi all!

  I tried to format my Macbook Pro (2015 start, 13 "), so I wiped the disk with disk utility.

  Now, I'm the restart with CMD - R and a globe appears. I know that it means that the computer is trying to reboot from the internet, but I have to choose my Wi - Fi and insert the password.

  The problem is: the touchpad is not sensitive, so I can not perform the procedure. I also tried a keyboard and a USB mouse, but it does not work either.

  Thanks to anyone who responds!

  Start up your Mac in Mode without failure.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key . You must press the SHIFT key as soon as possible after you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  
  

  
  

  Then start while pressing the command + R keys to access internet recovery to restore the OS X.

  Just to let you know, you don't need to wipe the drive using disk utility in your Applications / Utilities first folder. Only use OS X Recovery

  to reformat and restore the OS X.

  On Safe Mode

• Google Maps does not work in FF5

  Google maps does not - it displays but keeps in a State of "loading". This applies to a card of Google.com search that freezes or a maps.google.com which cannot interact with. You might want to confirm that the latest version of flash is not cause problems

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

• A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  A friend gave me his iPad 5.1.1 iOS.  I plugged on my desktop to load (I have also 2 iPod Touch from my iTunes library), but the iPad indicates there is no SIMcard (?) and that it does not load.  That pasa?

  The iPad does not have a SIM card. Most are wifi only.  The USB jack on the side of a machine very likely does not provide enough current to recharge an iPad. Use the power supply provided 2.1 watts (if you have one - if it isn't get a).