YOGA 10 gel - factory reset does not

Similar Questions

• Factory reset does not work

  I have a Nighthawk X 8 I bought two months ago. Up to today (March 7), it worked fine. Today I came home and found it did not work. I tried to access it via routerlogin.net, nothing worked. I tried factory reset using a toothpick about 5 times now, but it doesn't seem to matter. my computer (connected via ethernet) does not allow me to set it up, and I'm not wireless. The power button remains mostly orange, but it seems resets automatically once in a while.

  I tried to call customer service, but they hung up on me while starting to record my router midsentence. I'm afraid I'll need a RMA number, unless someone can tell me why reset does not work. I tried to do it for 8 seconds (directions say that), longer, several times, while it was turned on, turned off, both, etc. None of this helps.

  If I can't get the factory reset to work, is there a way to set up an RMA number without appeal? After the initial CS hangup, I was told that I would be on the phone for an hour, waiting for relief.

  I ended up doing an RMA number. Got my new unit and it is working fine now. If all goes well, he will not leave in like the last 2 months...

• Factory reset does not erase usb_1?

  It's maybe just me, but you wouldn't think that a 'Factory Reset' would be empty all the stuff non - factory?

  The reset is NOT clear the usb_1 out directory.

  Is it normal?

  Is there something else than below to erase it?

  https://supportforums.Cisco.com/docs/doc-14065

  I tried pressing reset for a longer period and that did not seem it empty.

  Any thoughts?

  TIA

  Marc,

  
  

  The Factory reset or restore to factory default is oriented to the 'Configuration' of the DMP.  Flash content is not deleted as you saw.  The FAQ you are referencing is a good way to remove the files if you want.  So the DMP works as expected.

  
  

  If this answers your question, take the time to mark this

  discussion answered & rate the answer.

  
  

  Thank you!

  
  

  T.

• M251n: M251n factory reset does not end

  Hello

  unlinke other questions, I have access to the Panel to reset the default printer. But when I do (and confirm with OK) it says "Please wait" and the lower led (the one next to the incomplete circle) flashes - and that's all. Not reboot, nothing (after 15 minutes).

  I would like to give the printer so I want to make sure that no information (in particular, no information on printouts) remains on the printer. Y at - it another way to ensure a factory default reset (and perhaps to check it out later)?

  Thank you and best regards,

  Jens

  Hi @jenskauf ,

  By your post, I see that you do not want to set the printer back to factory settings. I can help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• My iphone 6 has no service and always looking. WiFi works, sprint is not sure what is wrong with it. no damage ever to the phone. factory reset did not fix the it. Please advise?

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  isoldier86 wrote:

  I need to know if I have a network problem or a hardware problem? My iphone 6 does not service and always looking, the wifi works. Phone has never been damaged. Sprint can't fix it, they think that its hardware problem. Factory reset did not work. Please advise?

  Get help with hardware features on your iPhone, iPad and iPod touch - Apple Support

• I can't log in to my account to Mozilla, and Password Reset does not work.

  I have an account to create themes and Mozilla Add-ons, but now it seems inactive,
  and password reset does not work. Here is one of my themes:
  https://addons.Mozilla.org/en-us/Firefox/addon/Fox-December/
  my email: [email protected]

  Support for the site Add - ons are here:
  https://discourse.Mozilla-community.org/c/Add-ons

• Factory restore does not! Intervention of possible virus?

  Hi all

  Saturday, my computer has a horrible virus on it... I don't know yet what it was. Needless to say she caused explorer.exe restart constantly to make the very difficult to use computer. I managed to do a system restore, which bought me 2 hours (I thought I had solved the problem), but just in case I have saved the files I need the Mac laptop I'm writing currently. So, thinking I was finally triumphant I restarted and press ctrl + f11. Nothing. Windows has started. So I restarted the computer and held ctrl I quickly you press f11. Yet once nothing, until the bar Dell loading was completed, and in the short time between this screen and the windows flash screen of the computer beeps accordingly to a button. But still the Factory Reset has not loaded. I'm running a 5150 Dimension so I am sure that the computer has done the Factory Reset partition. But it's a kind of essential because Dell didn't send me a disc of Windows XP with my system, and apparently someone deleted me the product code of my computer. So, basically, if I can't restore settings I'm in a deep. (And I have tried EVERYTHING to identify and remove this virus... but it is elusive. It has elements of a sasser (play with my hosts file) but apparently the spazzy explorer.exe is a Vundo problem. HOWEVER, whatever this thing is missed time Kaspersky (which I am more able to install) and AVG, AND software tool windows malware and the removal of sasser Symantec tool.

  P.S. to mods... Sorry if this is posted in the wrong section. Hard drive seemed appropriate...

  
  

• Image Count Reset does not?

  It is strange to ask a question here I'm usually the one answering them ;-)

  But in any case, is there a problem with image monthly account reset does not to the 10 of every month? Added the subscription in June and he has yet to reset. Anyone else having this problem?

  Hi Brad

  Thanks for all your help on the forum of Stock!

  Let me see it for you.

  Kind regards

  Bev

• Hard reset does not not with 9.3 update

  With the new update, I can't hard reset my iPhone. Siri does not work all the time. Sometimes when I reset hard my phone unlocks even if I'm not using my footprint.

  You could try these:
  

  
  

  1. Restart: press start/stop button until the Slide to Power Off slider appears, select Slide to Power Off and after it stops, press on On / Off button until the Apple logo appears.
  2. Reset: press the home and On / Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
  3. Restoration: connect your iPhone to iTunes on your computer, backup, and then select factory restore

• Security issues 'reset' does not appear when I try to change the questions

  I am trying to change my account email address, but I don't remember the answers to the questions. I tried to change the questions but it gives me the ability to reset my questions

  You must ask security team account Apple to reset your security questions. To contact them, click here and choose a method; If this page does not list one for your country or if you are unable to call, complete and submit this form.

  (142998)

• Lenovo ideapad 100 s reset does not work

  New computer with windows 10 and reset function won't work...

  No idea what happened, was a disc and restarted my system. PC turns on, shows lenovo and windows does not start. Entered into reset mode, computer says unable to perform the reset, so I tried recovery and methods of restoration and always impossible to perform a reset. So im stuck with a laptop 2 days old which is useless atm. Function only allowed to perform was to turn off the computer.

  Go to bed will read the morning comments... Thank you

  Took me all day... problem solved... went to the site downloaded NDS windows microsoft 10 on a USB key from another computer and connected to this computer. Switched from the boot on USB and re installed windows mode. Works great now and I hope to God that I have never do it again.

• Yoga 900 - battery plugged in, does not support.

  Hello

  I seem to have a 'No load' intermittent problem on my Lenovo Yoga 900.

  This happens often when it is fully charged and I unplug for a few minutes and then plug it in again. If I let it go below 93 to 95% it will tell usually "plugged in, charging" again.

  Is this some kind of glitch or a feature? I tried looking to see if I had the setting of 'conservation' and I do not have.

  I have a few days to take it back to the store if I need to. I'd really rather not send it because we have problems of the Stagecoach drop packets that end up getting robbed because we live in an apartment with several locked doors, so they usually it plant next to the door and run off and then someone else takes off with our business. Had it happens a few times with orders from Amazon. (grr)

  Thanks to anyone who can answer this question!

  Comment to Moderator: The model is added to the object for clarity.

  Good day and welcome to the community.

  It is my experience with my 900 Yoga and the Yoga s 900. In this way the system does not constantly on 1 or 2%, which is not good for the battery. In contrast, Mode of Conservation will be charge at ~ 60% and then stops. That has certain advantages, too. Personally, I don't use The Mode of preservation, and so far I have not seen no negative effect on my batteries.

  I hope this helps.
  Kind regards.

• MacBook pro 2015 stuck in Bluetooth Setup mode after commissioning, recognizes on the keyboard and track pad. SMC reset does not work.

  My Macbook Pro 2015 stopped periodically (and now permanently discontinued) responding on keyboard and touch pad Board. This seemed to start at the same time, I got a Bluetooth headset; When I turn on the computer, he's stuck in Bluetooth Setup mode. I tried to reset the SMC, and it does not work. I don't have a Bluetooth keyboard to even try with it. Also, I can't start in safe mode. It seems completely blocked. Any help you might be able to offer would be great!

  Hello rad trp,.

  Thank you for using communities Support from Apple!

  From your post, I understand that your keyboard and trackpad on your MacBook Pro are unresponsive and now you see the Bluetooth set up screen on the computer. I also see that you tried to reset the SMC, but that doesn't seem to work because the built-in keyboard do not respond.

  I know that you do not have a bluetooth keyboard, you can connect, but you have a USB keyboard? Even a USB keyboard for a computer Windows will work. If you do, I would say connection that the keyboard and you use these keys to perform an SMC reset, but reset the PRAM as well. Instructions on both of these resets can be found in the links below if you need.

  Reset the management system (SCM) controller on your Mac - Apple Support

  OS X Yosemite: reset PRAM your computer

  See you soon!

• My mother has forgotten her password. Reset does not work and the e-mail for it no longer works.

  My mothers account is * address email is removed from the privacy *. She cannto remember his password. A standard to reset request does not work as the old email not available more

  Hi MorganSilver,

  Thank you for visiting the Microsoft answers community.

  The question you have posted is bound using Windows Live and would be better suited in the Center of Windows Live Help solutions. Please visit this link to find a community that will support what ask you

• HP LaserJet Pro P1606dn: Fatal error Laserjet p1606dn - hard reset does not help

  I powered on my printer this morning and having to "calibrate" - type sounds for about two minutes, the Attention, ready, and go lights on (solid, no blinking). The printer prints everything I have send to it, even test pages. By following the instructions on this page, I did a hard reset by putting off the printer, unplug the power cable, leaving unplugged for about 60 seconds, then in him plugging back in and turning it back on. Same thing: makes noise for a minute or two, then three strong lights.

  The printer is on a wired LAN, and I tried printing from two different computers on the network. I tried not to do a direct USB connection yet because this seems irrelevant to the question. The network (10.10.10.x) page shows the status of the printer such as "Printer Error".

  FWIW, he showed the same error last week, but a hard reset fixed it on the first try. This time, it does not.

  EDIT: If it helps, the date of the firmware is 20120814. I tried to update to 20150114 via the update utility, but he says that he can not find a serial p1600 printer is installed.

  EDIT 2: the printer will not even turn on. Tried a few different outlets, power strip directly into the wall vs - nothing. I think he's dead. Based on my experience with HP printers, I'm not surprised.

  Hey @dselzle,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are having problems with turn your Laserjet P1606dn. I can help you with that.

  To start, you will want to make sure that the printer is plugged directly into a wall outlet , not a surge protector. Once's done it, this document will help you with your power problems.

  If you are able to turn on the printer, then that's fine. If it doesn't always turn the printer will need to be repaired. You can contact HP by clicking on this link by clicking on the form below.

  If this resolves your problems so please let other users know by clicking on accept as Solution next to this post.

  I hope this helps and I hope you have a nice day!