Connection Wi - Fi stopped working

Similar Questions

• Error "ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. » »

  The original title - the following message mean?

  I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.      'Close program' is in a box for me to enter.  What does that mean?  What I'll do.  I get this message for about a week now.

  Hello

  Read the solution proposed by Don Varnau at this link

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/ArcSoft-connect-daemon-error-message/c4a5511e-65f9-4B9C-9a43-d9f631c32b73

  Hello

  Quick and dirty solution...
  Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.

  Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp

  Check Add or remove programs for any of these programs and uninstall the program or turn off
  automatic updates or to automatically connect or what similar feature you find.

  Hope this helps,
  Don
  

  __________________________________

  See you soon.

• ArcSoft Connect Daemon has stopped working properly

  I get this message about the Arcsoft Connect Daemon has stopped working properly.  What are the solutions to this problem?  Thank you.

  Go to: Control Panel, administrative tools, Services of control.

  Double click on Arcsoft Connect Daemon.

  Startup type: disabled

  Location status: stop

  Click on apply, OK

  If you do not use the uninstall program, it also stop him.

  If you use this program reinstall should fix the problem.

• ArcSoft Connect Daemon has stopped working

  At the start of my laptop, I always get the message "ArcSoft Connect Daemon has stopped working". -What this means or what should I do?

  Original title: "ArcSoft Connect Daemon".

  Hello

   
  Remember to make changes to the computer before this problem?

  Method 1:

  You can uninstall and reinstall the software or download the latest version of ArcSoft Connect from the following link and check:

   
  To uninstall a program
  Uninstall a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
  Method 2: I suggest you to put the computer to own and install the program
   
  Step 1:
  Put the computer to boot and search for the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.

   
  Step 2:
  To install a program
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-program
  Reference:
  
  http://www.arcsoft.com/public/download/arcconnect.asp

   
  
   
  You can also contact ArcSoft support.

  http://www.arcsoft.com/en-us/customer_service.asp

  I hope this helps.

• ArcSoft connect notification has stopped working

  I have problems with what follows when the fault Jetcar pc and after a while, I have to start up again.
  ArcSoft connect notification has stopped working
  and
  the folder of system of procedure entry point arccon-live announcement could not be located.
  can anyone help

  http://www.arcsoft.com/Forum/forum_posts.asp?tid=1445

  Read the above info.

  http://www.arcsoft.com/forum/default.asp

  Ask in the Forums of the 3rd party manufacturer at the link above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you don't know anything about it, you can try out of boot entries:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Read the info at the link above.

  See you soon.

  See you soon. Mick Murphy - Microsoft partner

• Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

  Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

  My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

  Hello
   
  ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
   
  In order to eliminate that your computer allows you to try these methods.
   
  Method 1:
   
  If it is installed in C:\Program Files, you can uninstall using programs and features.
   
  Do follow the link provided below.
  Uninstall or change a program
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
   
  Method 2:
   
  Try disabling Services "ArcSoft Connect Daemon" service before you start.
   
  To do that you must follow these steps:
   
  1. click on the Start button.
  2. type services.msc in the search field.
  3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
  Now, restart the computer and check if the problem is resolved.
   
  Method 3:
   
  If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
   
  For this you need to follow the links below.
   
  Description of the Windows Installer CleanUp utility
  http://support.Microsoft.com/kb/290301
   
  For cleaning and installation you can go to the link mentioned below:
   
  http://support.Microsoft.com/kb/923100
   
  Add this link to download the Windows install cleanup:
   
  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Satellite T110 - WLan connection has recently stopped working

  I have a Toshiba Satellite T110 with Windows 7 Home Premium.

  Wireless has recently stopped working with the yellow exclamation mark showing above the symbol of the unit.

  Looking at the pilot management screen, the following message appears.

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Nothing I have tried seems to shake this error.
  I tried the Toshiba assist diagnostic tool. It simply says that the wireless connection failed his test.

  I don't know how problem was that the system worked for about three weeks, without a hitch, but I would like to know if anyone has any experience with this problem.

  I could try a rebuild, but I prefer not to lose my OS.

  > "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I think that there is a simple solution; error message is clear enough; It is said that the driver cannot be loaded this means something has happened to the Wlan driver
  In my opinion you should visit the European driver of Toshiba page and should download and reinstall Wlan driver again!

• Input HDMI Sony Bravia KDL-40BX420 of connected PC has stopped working

  I used my laptop to my Sony Bravia TV using the HDMI ports for more than two years without problem. I unplug it and plug it back on a regular basis without problem. I have returned from a weekend out of town and plugged my laptop back to and kept getting the error on the TV:

  No signal. Check the external source or select another entry with the ENTER key.

  TV:

  Sony Bravia KDL-40BX420

  Laptop:

  HP Pavilion G6 with graphics Intel HD Graphics 3000 with the latest drivers (Intel HD Graphics driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347), 8.1 for Windows 64-bit

  What I tried:

  • Tried it with 3 different HDMI cables (without success)
  • Tried connecting Player DVD TV HDMI ports (successful, plug-and-play)
  • Tried to connect the PC to another TV with cable HDMI listed above (successful, plug-and-play)
  • Tried to reset the TV to factory settings (reset successful, still no PC signal)
  • I tried power reset on the TV (unplugged for a few minutes, connected again, no still no PC signal)
  • Tried to reinstall graphics drivers of PC (Intel HD Graphics Driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347, Intel, installation successful, website still no PC signal)
  • Tried to install the latest graphics drivers from the manufacturer's Web site (Intel high definition (HD), pilot chart, v9.17.10.2843, from the HP website, successful installation, still no PC signal)
  • Tried different resolutions video on the PC, exit in double...
  • Tried different boot sequence, with mixed results:
  • Turn on PC the sound on the TV: no signal.
  • Turn on TV that the sound on PC: I see the logo of the 8 on Windows with white turning points on the TV (double on the PC screen and before arriving at the Windows login screen TV turquoise rounds with the error 'no signal'.) So the HDMI works, but only for a short period of time during the boot sequence for Windows.
  • I tried restoring the system to a restore point not go a week ago (HDMI to TV works well all week), no chance. Still no TV signal, and the PC keyboard has stopped working too. That challenge.

  I'm out of options. Help would be very appreciated. Please just keep in mind that he has worked for more than two years without any special configuration. Just plug and play, as it is supposed to.

  Thanks in advance

  have you tried to connect via HDMI port on your TV?

• A default gateway is not available: Wi-wired connections and has stopped working on my PC

  Hi all.

  Connections Wi-wired and on my PC have stopped working all of a sudden. I tried to restore my system to an older image, and he began to work for a while. He then stopped working again after a few hours, when I apply my updates of windows and other restorations (to the same restore point) didn't help. Troubleshooting, says that the default gateway is not available.  I already tried to renew that my ip and disable firewall and they do not seem to help. I am also unable to ping my default gateway. It is not a problem with the ISP, since I am able to connect using my laptop.
  I use an edge of dell wireless network adapter and use a realtek network card.
  Any help / pointers in the resolution of this matter will be highly appreciated.
  -ONE

  Ok. So, I finally found the real culprit. It was an update of McAfee, which cut the Internet. I ended up uninstalling McAfee and re - install the latest version. Found the solution through this post:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-cannot-connect-to-the-Internet/7ee7b350-3937-4b7a-bbc5-786b2333f4b2
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

• DV7 3105ea:touch controls such as volume control, turning power switch connection Wi - Fi stopped working

  My laptop is dv7-3105ea. The buttons above the keyboard touch and just below the screen has stopped working. Could someone please? Thank you.

  Try a hard reset, works sometimes. Disconnect all external devices first.
  
  battery and power cord 1 / removal
  
  2 - Press the power button for 30 seconds
  
  3 reinstall only the power cord for the first start.
  
  4. turn on

• My xbox360s is connected to everything outside the window library, how do I connect when it stopped working

  We bought a new xbox 360 s with 324GB hard disk, we began putting in place yesterday ihad continued in music all my music was there was play for me but when I went to video, they were there too, but was, nt play .i bought 1 years gold card when I went to xbox t , day connects all media windows except u could help me please any of my music list doesn't either?

  Hello

  Your best resource for XBox issues are the XBox forums.

  Here is a link to the forums for your convenience.

  XBox Forums Home: http://forums.xbox.com/

  Concerning

• My connection of Sprint U760 USB card stop working and get error 1721.

  HP Pavilion Entertainment dv65565us

  Vista 32 - bit OS

  Error: Error 1721: there is a problem with the Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: UnregisterPhoenix, c:\ProgramFiles\Sprint\Sprint place SmartView\, command: "C:\ProgramFiles\Sprint\Spring SmartView\Phoenix.exe/unregservice/embedding".

  Connection card has stopped working, uninstalled Sprint S/W, get the error when you try to reinstall.  Sprint said to contact HP, it's a phoenix bios problem. I don't know what to do.

  Thank you!

  Decided to make a restore point and then got a new Error 1316 regarding Windows Installer

  problem.  Downloaded and executed the http://support.microsoft.com/kb/2438651/ even though it says it's for 64-bit

  machines. It worked perfectly on the 32-bit computer and my laptop now works perfectly and installed Sprint

  SmartView software without any problems.

• ArcSoft Daemon has stopped working

  For several weeks now I get an error message whenever I start my computer.

  "Arc Soft connect Daemon has stopped working".    'Microsoft is working on a solution and will inform you with a result' (this part is not the exact wording).
  Why this is happening and how can I get rid of this or repair.
  Thank you.

  Hello

  Published by Marilyn here

  "Click on the Start button. In the start search box, type Msconfig. Then click on the Startup tab.
  If you have any input to Arcsoft, then disable and see if that gets rid of the error at startup.
  If you have more than one program of Arcsoft, turn off one at a time to test them to see which comes the error. »

  Fail with it, try to boot minimum troubleshooting to find the offending program.
  929135 - how to solve a problem by performing a clean boot in Vista or Windows 7:
  http://support.Microsoft.com/default.aspx/KB/929135

  When you identify the troublesome program you can (1) search an update for the program that could solve the problem or (2) uninstall the program.

  Don

• SFTP, stop working

  One day a few months ago connections SFTP just stopped working to Contribute (CS3). When we went to Contribute CS4, he worked briefly, then beat again. Last Friday, it's the same thing on 2 of our 3 PC using Dreamweaver CS4. Other customers SFTP and SFTP server connections still work. Two computers running Windows XP SP3, while another uses Windows Vista SP1.
  
  I remember correctly, there was no indication of a connection in the server logs when it fails.
  

  This problem apparently originated with our antivirus, ESET NOD32. A post in forum General Discussion of Dreamweaver, topic "SFTP stop working" features the details of the solution. See this URL:
  http://www.Adobe.com/cfusion/webforums/Forum/MessageView.cfm?CATID=189&ThreadId=1412119

• Mail has stopped working on Mac Pro 10.9.5. All outgoing mail says "this message has no content. Enabled connection, rebooted the mailbox. Anything out.

  Mail stopped working on my Mac sent two emails six then rejected the other four. Stuck in the Outbox with the designation "this message has no content. Click on the message and the attached picture shows in the email. I have checked the connectivity, tested the email account using my iPhone, no problem. Have deleted the box the letters and he added. None of my other accounts are no longer works. The initial issue is bell south.net but I tried gmail and it does not work either.

  You can check the settings of e-mail by the following site.

  https://www.Apple.com/support/mail-settings-lookup/