Yoga 11s Touchpad doesn't remember settings

Similar Questions

• HP Pavilion Notebook - 15: scroll pad doesn't remember settings

  Hello

  This problem has been driving me crazy for weeks.

  Everytime I turn on my laptop, I have to reset the Clickpad settings to enable the "scroll" as ever, he remembers the creation.

  I have the most upto date driver, uninstalled and reinstalled and nothing works.

  All solutions to resolve this annoying problem before I have to contact HP? He was going well until the upgrade Windows 10!

  Thank you very much.

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• PE9 doesn't remember settings

  Hi all

  I'm new to this forum. A bit of an introduction: Johan is my name. From the Netherlands. And I'm new to Premiere Elements. I have a little experience (professionally) with FinalCut and with an older version of WinXP first.

  But now I'm on a brand new Mac mini with SnowLeopard. Bunch of fun!

  Now to my problem: first recalls its initial settings. Whenever I start the first I need to change the default NTSC to PAL (and other parameters too). Elsewhere (on this forum, too) it is said that these settings are supposed to be sticky: the last parameter is known for all future sessions until what you decide to change these settings. But no, not in my case.

  I forgot something or what?

  Sincerely,

  Johan

  ~~~/\___Flevoland___/\~~~

  I don't know what goes wrong, Johan, but I have never seen anything like this before.

  I have been using Premiere Elements on my Mac for a year. Always default to the last I used project settings.

• Yoga 11 s - back to factory settings

  Hello

  This is my first post and I hope that you can help us?

  I need to get the recovery CD for my yoga 11s to put it back to factory settings?

  How can I achieve this?

  Please can someone help?

  Thank you

  You don't mention that you have created a recovery machine USB flash disk before the original failure to SSD, so I would say that you should contact the technical support number in my post above. They should be able to explain what options you need to recover your factory licensed operating system / configuration of the machine.

  Kind regards.

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Windows 7 doesn't remember the folder views.

  original title: Windows 7 doesn't remember the folder views. Microsoft is pathetic.

  Once more, I find it quite pathetic that Microsoft Windows 7 as Vista, such as Windows XP and all other operating systems M$ has developed can not EVEN remember the layout for the records.

  What is THE POINT of having more customization options in solution for users to set, Explorer if your code Explorer STUPID don't even BOTHER to remember. Users bother to customize their desktops and file only to discover that their work is broken as soon as the PC restarts or in Windows 7 Decides to forget or to crush stuff in the registry.

  It is also pathetic that M$ has removed most of the "individual" customization of Windows XP folder now opt for a "point of view fits all approach!". (Ie the deletion of the folder option "View tab / remember this layout of records"). I can't decide if a file opening should have the "Navigation bar" to the left. Now, if a folder has the navigation bar, hey look, ALL MY FILES open with the navigation bar now! Yay! NOT.

  Even with this, HE has YET to forget every customization that you made to your files!

  Things going on in my head when I'm on Windows 7:

  Mmmm. I'd like my account to have this icon or bitmap image please. There we go, very nice. Reset. Mmmm. Why is he returned to show all the file type icons in this new folder. Oh God, worst yet! NOW ALL MY FILES ARE RETURNED TO THE DETAILS VIEW. B * llocks, I've spent hours a lot, a lot, a lot (over time) establishing this batch! Gee thanks to shake me more M$. You've obviously spent a lot of money and many hours asking your BETA users which would p * ss them off the most when you use Windows Explorer. Voice of tester beta geek: "uh Yes, I think I was very p * ssed if all of a sudden he returned for more details on all my folders in Explorer. Microsoft: "OK, we're going to take care to include that then...". "Everything what is p * ss you off." Geek: "Yes, while your at it, if the navigation bar appears on EVERY issue and doesn't even have a shortcut key, so I had to reach for my mouse and go to a menu rather than quickly display and hiding cases of need, which would probably be p * ss me off really bad." Microsoft: ' hey this is a great idea!

  Folder view settings should be remembered INDIVIDUALLY for the love of God, on a folder by folder basis.

  I think that the removal of this option, and becomes the fact that Microsoft have removed code rather that actually fixing the code first place is a sign of how pathetic software from Microsoft.

  I hope Apple start to develop their PC rather than just Apple Mac operating system sometime in the future.

  It will ultimately be the nail in the coffin for Micro$ and personally, I'll be happy to see the back of them.

  I'm a PC and I am upset that Microsoft Windows Explorer doesn't bother to remember how I presented my files.
  
  If you want to know what I'm talking about m $ look the Apple Mac operating system and copy what they do (you know, the usual).
  At least they seem to know what I'm talking about.

  If you think I'm the only one who is upset at this by the way: http://www.google.co.uk/#hl=en&source=hp&q=windows+7+remember+folder+settings&btnG=Google+Search&meta=&aq=0&oq=Windows+7+remember+folder&fp=a60718907b4ba39b

  21.5 million users would disagree with you.

  DESIRED EFFECT

  To have a folder and its subfolders all use the same view model AND having the view model to reflect the disposal of one of the folders.

  WHAT YOU NEED TO DO

  First, you must realize that Win7 treats these two very different applications:

  1. make subfolders use the same model from view as the parent folder.

  2 configure how a view model is laid out.

  My confusion is I thought that changing the layout of the folder parent by clicking on 'Apply to subfolders' it applies to the layout of the parent folder, but all it's means "all look to the model of display as well as the parent folder.

  Understand that when you say "optimize this folder for: * music *" IT IS NOT AUTOMATICALLY CHANGE THE LAYOUT of the folder! Only it it's a music folder (or general or images or other) and ALL TIME NOW ON the time the * music model is changed (via right click on any * music folder > organize menu > folder and search options > view tab > apply to records) THEN the layout PAGE ONLY will be updated.

  So unfortunately, Xaero_Payne solution by itself will result in the 'problem' that everyone here seems to have. You do BOTH steps to make it work. (I know it's easy to chatting about M$, but instead of pi$ $ in the wind at home, we can as well get into their heads and understand how to use what we have).

  STEP BY STEP

  You can do these two processes in any order, but I want to do such as this, because I can then more easily see changes. For the example below, I'll do their music files and I'll apply the Details view template.

  R process: make subfolders using same view model

  Right-click on the Parent folder that contains all of the subfolders > properties > Customize tab > check also apply... subfolders > select * music * (for this example) > apply then OK

  Process 1: Customize and apply the provision of fashion model music

  Find or create a folder you want to use the view model.

  Select them * details * view (or list, large icons, etc.) and then customize the layout as you wish. Add new desired columns and rearrange them as you like.

  Organize the menu > folder options and research > display tab > apply to records. THIS MAY BE THE MOST IMPORTANT OF THIS PROCESS because otherwise he doesn't know you want ALL the * music * files to be like this.

• Firefox doesn't remember history.

  When I use Firefox it doesn't remember not all pages. I checked it in the options to ensure that it was set to remember the story and also tried reseting. When I opened the watch throughout history the entire list is empty. List of bookmarks is always very good and he still remembers the closed tabs, but nothing is stored in the history.

  Try to delete a file user.js possible and numbered files prefs-# .js and rename (or delete) the file prefs.js to reset all default prefs, including the defined via user.js and prefs prefs is no longer supported in the current version of Firefox.

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Touchpad doesn't scroll after installing Windows 10

  Hey guys,.
  After you have installed Windows 10 my touchpad doesn't scroll more
  Can you help me?

  Try to uninstall the driver for the touchpad from the Control Panel, and then run Windows Update to install the updated touchpad driver.

• Envy 17 (T7x29ua): Tocuhpad won't remember settings

  The touchpad won't remember what shiuld off pad when an external mouse is connected. If I unplug the mouse and power and go door by side for a few minutes, then back then reconnect everything I must return to the control panel to turn off the pavement.

  He remembers as long as I do not unplug the power supply. He went to sleep during this period.

  Ok.

• I can't download anything either because she doesn't remember the password is there anywhere we can go here to reset?

  Original title: mother frustrated

  My daughter put a password on the user account control box when we 1st got this computer. I can't download anything either because she doesn't remember the password is there anywhere we can go here to reset?

  Assuming it is the admin password that your daughter has forgotten.

  This forum prohibit anyone who helps users to bypass the password protection, regardless of the reasons.

  Link to the policy of this forum:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

• Orchestrator device doesn't remember newspapers of Workflow

  Our unit version: 5.1.0 build 2725

  Hello!

  It is sometimes necessary to write information to a workflow with the Systems.log () method in the Logs Section of an Orchestrator Workflow. But unfortunately orchestrator doesn't remember the entry of these newspapers after logout?

  Example:

  Very simple WF: enter text and save this text... nothing else, see pdf attachment

  Then I entered 'Text1' and run the Windows Firewall:

  

  as you can see in newspaper it is my "Text1".

  This log entry is recorded in the journal orchestrator:

  28 2013-03- + 0100 INFO [performance] 12:15:09.450 run workflow "paper method.
  28-03-2013 12:15:09.747 + 0100 [SCRIPTING_LOG] INFO [Log method (28/03/13 12:15:09)] Text1
  28 2013-03- + 0100 INFO [WorkflowHandler] log method 12:15:09.834

  now I close orchestrator and you connect again and go to my previous WF run

  

  The newspaper went! ??

  I remember that newspapers must be in the orchestrator database as long I did not remove the completed wf run... and with the old version of the orchestrator unit, it was the truth... but now?

  Any ideas to save the journal entries?

  This is normal. If you want to keep the newspapers use Server.log

  More information on vco logs here: http://www.vcoteam.info/learn-vco/how-to-handle-vcenter-orchestrator-logs.html

  Christophe.

• Export as that doesn't remember the last used settings

  Trying to get used to the use of export as instead of the old economy for the Web. However, it doesn't seem to remember the last settings I used. Save for Web still don't this, no problem. It's quite embarrassing and I have always used save for Web for this reason. Is there a way to remember? I have changed my preferences to export but it was just for the Quick export. Any ideas?

  qmatt wrote:

  Trying to get used to the use of export as instead of the old economy for the Web.

  Do not. The new export module is not finished and it still lacks a lot of features (like the color management and the support of metadata). IMO, it was shipped prematurely.

  The code of save for Web is based on the old ImageReady and certainly need a review/rewrite, which I do not know "export as" will provide beautifully. But until it's over, using SFW.

• Firefox doesn't remember the settings of the browser.

  Every time I open firefox I reconfigure my preferences (homepage, internet history settings). This only happens when I close all firefox windows and tabs and then reopen firefox. My home page is my igoogle page. When I reopen it firefox it take me to the login page General igoogle. Once I configured to never remember history of the internet then close firefox and reopen the Web history settings go to "use custom settings. I tried everything on https://support.mozilla.com/en-US/kb/Preferences%20are%20not%20saved without success. There is no user.js file in my profile folder. I ran my antivirus, antimalware, and antispyware programs, McAfee, MalWareBytes, SpybotSearch & Destroy (which are updated) and they are. I also uninstalled firefox and reinstalled without success. It is frustrating increibly. Help, please!

  If you have Firefox put forever history remember it will not record your password for iGoogle (it's like using the incognito Private Browsing - use Firefox without saving history). So in this case Firefox isn't a bad thing. You want to register not history? In this case, you must either change your settings to remove just the history cache with pages, or simply log into iGoogle each time.

• Windows Vista x 64 doesn't remember my folder view settings? Need a fix

  I am currently running Windows Vista x 64 and I can't help but notice that my computer is the selection of what he wants to view my file to be types. I can select a view and is no longer have it remember. I'm constantly clicking on the computer and I have my HDD not defined by type and tiled group discovers. This is extremely annoying because opinions change on all my files. I tried many things and have not always been able to resolve the problem. Help, please

  http://www.Vistax64.com/tutorials/70819-Windows-Explorer-folder-view-settings.html

• Firefox doesn't remember "user names". In addition, Firefox does not remember dashboard settings IE. Toolbars, etc. How can I fix this.

  Nightly Firefox pours his memory of the names of users and toolbars.

  Sounds you have cleaning software running which removes cookies and possibly other profile data.

  The Bank Web site may use autocomplete = off to prevent Firefox to save and fill in the name and the password.
  You can remove autocomplete = off with a bookmarklet to make Firefox ask to record the name and the password.

  • http://KB.mozillazine.org/User_name_and_password_not_remembered