Yoga 13 Bluetooth mouse problem

Similar Questions

• Mac Pro RAM, Audio, Bluetooth mouse problems

  I recently bought an Apple factory refurbished Mac Pro (end 2013) and replaced the three-chip RAM of 4 GB with 16 GB of Crucial two chips. Everything was great for the first two weeks. Then I started having a strange audio problem. Audio would become suddenly agitated. I disconnected and reconnected the speaker output and it would start working again. Finally, unplug the unit and plug the unit has stopped working (audio would eventually just stop working completely... zero sound with or without the speaker plugged in...) and I had to restart the computer.

  Then one day I noticed that only 16 GB of RAM showed up (I run own memory, so he's in my toolbar). I opened the machine and moved the two chips on the other side and when I rebooted, I got 32GB again.

  Then I noticed that when the audio problem came once again (he seems to be after the computer has been for a few hours or more) my Apple bluetooth mouse would disconnect and reconnect intermittently... ONLY when the audio starts to get restless again.

  I zapped the PRAM several times and now I get the 32 GB of RAM only after disconnecting the chips and MOVING them to another location, but not all the time. The audio port will begin to spoil, I reboot and I'm back to 16 GB.

  So, is it bad RAM? I removed a single chip and the audio problem still happens.

  Anyone have this problem? Apple Care suggested I bring it in the Apple Store, but I thought that I ask here before go this road, just in case there is a known issue.

  Thank you!!

  Rick...

  To establish if it is a RAM problem, remove 16Bb sticks and replace the original 4 GB sticks.

• Bluetooth mouse problems with windows 7 ultimate

  I have two laptops which, without reason, all of a sudden loses connectivity of bluetooth mouse, it just stopped working and then I have to reboot to get it working again.  Two of these computers also have a bluetooth keyboard that is not assigned, the mouse.  I don't find anything wrong with bluetooth and have tried several different mice with the same results.  Windows 7 ultimate on two laptops.  a laptop computer used to run vista ultimate with the same mouse windows and it never happened, it started with windows 7.

  Hello

  These used laptops are relatively very close where they can interfere with each other?

  Will there be electrical/electronic or other types of interference in the region?

  Check with the bluetooth device to the manufacturer for known issues and possible solutions

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Norton and other security/antivirus/antispyware programs are known to cause problems with
  BlueTooth/mouse devices.

  =================================================================

  It is extremely difficult to solve the intermittent problems.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some: (not directly related to this issue)

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Bluetooth mouse problems

  Hi all...

  I have a few quick questions for everyone.  I recently bought my laptop as well as the Microsoft Bluetooth Notebook 5000 mouse.  I tried to get the laptop to see the mouse, but I keep coming up empty.  I guess my questions are, first, that my laptop has bluetooth correct?  Product number is D1E93UA #ABA, model M6-1225DX Envy.  Assuming that I have, someone had problems to make this mouse work?  I took a peek at the FAQ, but I'm running into some discrepancies.  The frequently asked questions seems to indicate that I should have a "Bluetooth settings" menu that is not displayed.  I have the 'add a Bluetooth device' option, so I'm a bit confused.  I began research for pilots and/or cards bluetooth on the computer and empty.

  Any help that someone could throw my way would be appreciated.

  Sorry for the late response... It seems that you have reason... your model do not have Bluetooth...

  HP ENVY m6-1225dx Notebook PC product specifications

  The form doesn't show no bluetooth, but according to the service guide, it supports some bluetooth combo when custom adapters...

  HP ENVY Notebook PC Maintenance and Service Guide of m6

• Alienware Alpha i7: Windows 10 upgrade with keyboard and bluetooth mouse problem

  Hi, after I upgraded my Alpha to 10 Windows x 64, the sytem lost connection to my keyboard and mouse bluetooth (both Microsoft, ironically).

  In the bluetooth Setup screen, the devices of just no longer appear.

  Unistalling the driver HID keyboard and restart has been recommended in many forums. I have not seen a change. Is there anything else I can do?

  TIA

  Hello

  You have probably the Intel 3160 ADAPTER Bluetooth 4.0 or the Intel 7265 ADAPTER Bluetooth 4.0. Try to reinstall the driver for your system and restart the computer.

• Bluetooth mouse lag when Bluetooth keyboard is connected

  Hello

  I recently bought a Lenovo Thinkpad with windows 8, and I noticed a really annoying problem. I have a Bluetooth mouse and a bluetooth keyboard and my keyboard works fine, but when my Bluetooth keyboard is connected, my Bluetooth mouse is REALLY bad. If the keyboard is off then the mouse works great, only it messes up if the two are connected at the same time.

  I have seen several discussions on the Bluetooth mouse problems when playing games or transfer of data, but mine does all the time if I have my keyboard connected at the same time.

  Is there anything I can do to fix this?

  Troubleshooting Wireless and Bluetooth® questions Check and reset power check the (rechargeable) batteries

  Try to charge the unit. It can take an hour or more to fully charge your device. See the documentation provided with the device.

  Notes

  • The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.
  • Some rechargeable batteries may need to be replaced. For more information on batteries, see the documentation provided with the device.

  Check the batteries (non-rechargeable)

  1. Make sure that you have installed the correct type of batteries in the device. For more information on batteries, see the documentation provided with the device.
  2. Replace all batteries with new batteries.

  Note

  The software can give warning of low battery. However, the State of the battery are not accurate if there is a problem connecting Wi - Fi. If you still receive warnings after replacing the batteries, continue with the other solutions provided in this article.

  Reset the power of the device

  1. If your device is equipped with a power switch, turn off the unit.
  2. If your device is equipped with removable batteries, remove the batteries and reinstall them. Make sure that they are correctly positioned.
  3. If your device is equipped with a power switch, turn on the device.

  Look for the software updates Check for Windows updates

  1. Click Start, click all programs, and then click Windows Update.
  2. Download and install the updates and priority updates custom, especially those related to the material.

  See the Readme file

  • See the Readme file for more information last minute product.

  Check the USB connection between the computer and the transceiver unplug and reconnect the transceiver.

  1. Disconnect the wireless transmitter/receiver and then plug it back.
  2. If the wireless transmitter/receiver is plugged into a USB hub, disconnect the hub, and then plug it in again.

  Plug the transceiver wireless to another port on the same computer.

  • If you have several USB ports, plug the transceiver wireless on a USB port different on the same computer.
  • If the wireless transmitter/receiver is plugged into a USB hub:
    1. Plug the hub on an another USB port on the same computer.
    2. Make sure that you use a powered hub that is appropriate for the powerful high USB devices.
    3. Try to plug the transceiver wireless directly into a USB port on the computer.

  Refresh the wireless connection all other devices connect wirelessly to Microsoft.

  1. Press the button on the wireless transmitter/receiver.
  2. Press the button connection on the underside of the unit.

  Optimize the signal check the placement of the wireless device.

  The wireless transmitter/receiver and the device must be correctly. Try the following solutions:

  • Place the device wireless closer to the wireless transmitter/receiver.
  • If you have a mouse and a keyboard, and they are both wireless, place them equidistant from the transceiver.
  • Turn the transceiver on the side or upside down.

  Some objects not wireless and wireless may cause interference with your wireless phone. To avoid interference from the transceiver, avoid using your device near objects such as:

  • Wireless network devices
  • Cell phones and wireless drill
  • Remote controlled toys
  • Microwave ovens
  • Cables parallel to the wireless transceiver cables
  • Metal surfaces in contact with the unit
  • Other transceivers and wireless pointing devices

  Setting up a Bluetooth device

  You can use the following information to help you resolve a problem with your device (keyboard or mouse) Bluetooth wireless.

  Check the connection between your computer and the transceiver Bluetooth

  • Make sure that Bluetooth is on.

    If you connect your device with an internal Bluetooth connection, make sure that wireless connections are active. Many laptops have a switch, a key or keyboard shortcut that enables wireless connections.

  • Turn on Bluetooth on your computer if your mouse does not have its own transceiver. If your mouse does not have its own transceiver, your desktop, laptop or laptop must have a two-way radio built into the computer, or you must use a non-Microsoft external transceiver. How the mouse will connect to the computer by Bluetooth, and how to turn on Bluetooth, varies depending on how it is implemented on the computer. You may need to contact the computer manufacturer or the manufacturer of the Bluetooth transmitter/receiver to find out how to activate Bluetooth on the computer and how to add a device to it.

  Refresh the connection Wireless to your Bluetooth device

  • Pair your Bluetooth device to your computer.
  • Re-establish a connection without wire if your computer does not detect a device compatible Bluetooth Microsoft if you try to use a Microsoft wireless keyboard compatible Bluetooth or mouse and the input device does not work, it is possible that your computer does not detect the device. To resolve this problem on a Windows computer, restore the link wirelessly with the computer. For more information, see the article of the Support Microsoft 811798 to http://support.microsoft.com/kb/811798

  Solve a connection failure when the installation software can connect to a Bluetooth Microsoft compatible device

  During installation, if the installer is unable to connect to the device via a Bluetooth connection, you must change the transmitter/receiver to use a Bluetooth mode managed by hardware.

  For more information, see the article of the Support Microsoft 953694 to http://support.microsoft.com/kb/953694

  Establish a Bluetooth connection when a device does not respond

  If the Bluetooth connection cannot be established, you may need to remove the device is unresponsive system and then add it again.

  1. Click Start, click all programs, and then click Windows Update.
  2. If the Bluetooth device is not responding is listed, select it and then click Remove.
  3. Click Start, click principally made programs, click the Microsoft mouse, and then click connect Bluetooth mouse.
  4. Follow the instructions in the wizard to connect to your device.

  Why is there a delay before a Bluetooth mouse answer after it has been idle

  To extend the battery life, Bluetooth devices go into hibernation after 8-10 minutes of inactivity. It may take several seconds for the Bluetooth mouse to reconnect when you resume using it after this period of hibernation. Thus, you may notice a delay between the time that you use the mouse and the response on the screen.

  Use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter

  Bluetooth wireless technology allows you to connect several devices to your computer. You may be able to use other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, but this connectivity is not always supported by Microsoft.

  For more information on the use of other Bluetooth devices with Microsoft for Bluetooth wireless transmitter, see the documentation provided with the device.

  For new devices, download the latest version of the software from the Web page of software downloading material.

  Connection of the keyboard of laptop Wedge for a tablet PC

  By default, the keyboard pairs Bluetooth Mobile from the hold with most tablet PC through safe simple pairing (SSP) with an authentication key. Some tablets, however, may not support SSP with an authentication key.
  In order to pair your keyboard hold such a Tablet Mobile successfully, use the following alternative pairing mode.

  Associate your keyboard by SSP without a password

  1. Hold down the Fn key as you press and hold the Connect button located under the keyboard. After 3 to 5 seconds, a small light on top of the keyboard flashes green and Red alternately. This means that your keyboard is detectable in your tablet in 6 minutes.
  2. On your Tablet PC, on the Start menu, select Control Paneland in category view, find the material and audio.
  3. Select Add a device.
  4. When the keyboard is listed, select it and follow the instructions to pair your keyboard Wedge with your tablet with success.

  Note
  If you want to associate your keyboard with a tablet or another computer that takes in charge the SSP with an authentication key, hold down the Connect button only.

  A keyboard or a Bluetooth mouse fails to reconnect after being left idle

  After you have used is not the keyboard or your Bluetooth mouse for a while, you may not be able to use the device again without rebooting the system or by turning your Bluetooth radio and turn it on again.

  For more information, see the article of the Support Microsoft 2758967 to http://support.microsoft.com/kb/2758967

• Re: Satellite U500-115 - problem with the bluetooth mouse

  Hello everyone,

  I use a bluetooth mouse Saitek mouse with my Satellite U500-115 (OS: windows 7) and a have a real problem that is boring:

  Every time that I do not use the mouse for 10 or 20 seconds the pilot (or what ever) rocking in a kind of 'sleep', and it can take up to 1 minute until the mouse is available again. It is defenitely is not a mouse problem. I tried the mouse with a laptop LG and a windows xp sytem and it worked perfectly.

  I tried the following:

  1 put in place the current on the site of Toshiba bluetooth stack--> having not caused no difference in behavior.
  2 put the mode to 'Full Power' energy saving--> that seemed to have some positive effect, but not always. Sometimes the time until the sleep mode begins seems to be a little more but not always. In the "Full power" the mouse seems to go back a little more quickly when he woke from the mode "standby mode".

  Test: as I wrote this text, the mouse driver began the "sleep mode", now I'll move the mouse and take the time needed until the mouse will respond again a moment):
  45 seconds

  Is it possible to put the bluetooth HID in some sort of "permanent way"? At least the touchpad also reacts independable mode of energy of the laptop; This is why I think that it should be possible to use a bluetooth HID in the same way.

  Thanks for any help!

  Michael

  Hello

  Go to Device Manager, click Bluetooth radios and choose the generic bluetooth adapter. Then, right-click and select power management properties, umark, allow the computer to turn off this device to save power and press Ok.

  I don't have a bluetooth mouse, so I can't check if works. Just assume...

• Problem with vaio pro and bluetooth mouse.

  My new Sony Vaio Pro has been disconnected my bluetooth MS sculpt mouse.

  I had to re - connect or even re-install the mouse. Painful!

  It turns out that bluetooth devices is powered via a USB controller

  On the Generic USB controller, under properties, there is a check box selected that allows the computer to "Allow" computer to turn off this device to save power

  I unchecked which and now my mouse works fine.

  Thanks for that. I couldn't work at all with the Pro my bluetooth mouse. Now maybe I can - if I can only find where I put the mouse...

• M535 Logitech Bluetooth Mouse is not matching in Boot Camp

  I recently bought a Logitech M535 Bluetooth mouse for my iMac 27 inch Retina (end of 2015). I paired in OS X, and it worked like a charm.

  However, when I booted Windows Boot Camp, I went to the Bluetooth settings in Windows and it finds my mouse. However, as soon as it started matching, it gave me an error message saying that the device was not found, and as soon as I close the error box, the mouse has disappeared from the list of devices. Then, it maintains the unknown devices listing, and I knew that one of them had to be my mouse. I tried all, but they all failed sail.

  Is there a Bluetooth driver problem in Boot Camp? If so, when the next update comes out? Until then, I use the mouse Magic Mouse on Windows (which still works) and the mouse from Logitech on OS X.

  Check the update of the Apple software for possibly updated drivers.

• Qosmio X 500 Bluetooth mouse not responding

  Hello

  I have the latest bluetooth stack / drivers installed. (Yes, I downloaded the last of http://aps2.toshiba-tro.de/bluetooth/index.php?page=download-toshiba) All the drivers are always updated to the latest including both wireless drivers.

  Problem: Every 20-40 minutes my Logitech bluetooth mouse stops responding. The cursor freezes and it won't move at all.

  I tried unpairing / pairing of the mouse, which helped, but then again after 1 hour it stuck again. I have re-installed the BT stack and that did not help as well.
  The only way I can use my mouse again when stuck is when I click on "Disable Bluetooth function" and then I 'enable Bluetooth function '.

  I do it about 10 times a day and you don't know how boring it can get.
  I bought a new mouse Logitech (Logitech M555b) Bluetooth and that did not help as well.

  If someone could help me out here I would deeply appreciate it.

  Thank you
  Mike

  That s strange but unfortunately; I n t have good solution for you, but just a few tips.

  Firstly I have google for this Logitech M555b BT mouse and found several discussions about the problems with this mouse.
  The connection problem occurs with other computers running windows 7 or XP or iOS (Macbook).

  So, it seems that this problem is not related to Toshiba BT stack.

  A friend of mine use other mouse BT from Logitech and it works fine all the time by using the Bluetooth stack.

  I recommend the Logitech forum for more details:
  http://forums.Logitech.com/T5/forums/SearchPage/tab/message?q=M555b#message-list

• lose control of the bluetooth mouse

  Why am I often lose control of my bluetooth mouse.  Also, when you wake up my computer why screen lighten in stages instead of all at once.

  What do you mean by "losing control?

  Ignition of sounds not like a hardware problem. If it bothers you, I would take test/diagnosis.

  Barry

• Satellite L70-A-K5S bluetooth mouse is not responding

  I used LaserTravel Logitech bluetooth mouse V470 for a few years with Toshiba Satellite P300 (Windows Vista).

  Now, I upgraded to a-L70-K5S and reconnected the mouse for this laptop.
  After using it for a few minutes, the mouse is no longer in effect.

  If I pass/enable the mouse, it works fine. Sometimes he wakes himself.
  I tried to install the software of Logitech (SetPoint), does not help.

  When I reconnect the mouse to the old Satellite it works fine.
  The mouse is supposed to be supported in Windows 8.

  Maybe the batteries BT goes out for some reason?
  Any ideas?

  At this stage it s not easy to say if there is a problem with your laptop s BT or maybe the mouse BT or perhaps the compatibility between BT mouse and win 8.

  I found this article in the knowledge base on the page of Logitech V470 BT connection problems.

  [My V470 Cordless Laser Mouse for Bluetooth does not work: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/20491/section/troubleshoot/crid/398/lt_product_id/3287/tabs/1, 3,2,4, 5/cl/we, en]

  You should check it out.

• Touchpad and bluetooth mouse on the Satellite P200-144 sensitivity

  I have a P200-144, with the Synaptics touchpad.
  I have also a Toshiba bluetooth mouse (the little mini one, useful for travel, don't know the model number).

  The problem is the difference in sensitivity between these two: for the touchpad, I need the speed of the pointer to about 80-90% in the mouse control panel in Windows (Vista Home Premium); the bluetooth mouse, to be down by about 20%.

  This allows using these two devices the boring time even if we need to adjust the sensitivity If you switch between them (which, given that they are both Toshiba devices, would have thought you they would consider the synergy).

  Is anyway to control the sensitivity per unit?

  Hello

  AFAIK, you can configure the touchpad and mouse settings independent of each other.

  The touchpad should be configured as:
  * Control Panel-> mouse-> device-> settings settings *.

  There you can choose the single options you want to change.

  Concerning

• Logitech bluetooth mouse M557 keep disconnecting

  Just bought a mouse Logitech bluetooth mouse (M557) a few days ago. It was easy to have detected it, however, I realize it loses connection every time that the macbook is left idle for a period of time (a few minutes)... Very annoying, because it seems impossible to reactivate the connection other than logging on my session (or computer reboot) and only then it will reconnect by itself.

  I am also newly on OSX 10.11.3 (I read a few concerns about the Bluetooth under El Capitan...) so I was wondering if the mouse is the problem, or if it is related to OSX.

  Since the price tag on the Logitech is not much lower than the Apple mouse, also I was wondering if I would be more successful with the Apple mouse, I still can return the Logitech at this point...

  Rob

  This seems to be a problem of know-how of logitech, they have a download to try. http://www.gottabemobile.com/2015/10/02/how-to-fix-logitech-mouse-problems-in-os - x-el-capitan / Other that this sometimes reset a stroller can help.  https://support.Apple.com/kb/PH18761?locale=en _

• Microsoft Bluetooth Mouse with my Satellite A60-122 issue

  Hi there;
  I'm a new user in this forum and this is my situation:

  I bought a Microsoft IntelliMouse Explorer with a USB Bluetooth adapter. When I plug the Bluetooth adapter to one of my four USB ports, bluetooth connection seems fine. However, I can't work with my new mouse. I have try all this on a Mac computer and mouse everything goes perfectly. I have not yet installed the driver! I don't know what is happening. I had installed the driver several times and it seems OK. DC when I search the mouse over the icon of bluetooth device, I see him there. However, the mouse does not work and when I open again the icon of bluetooth device, I can't see the connection bluetooth mouse more.

  My question was already posted by Sorin11 (08.12.05), and I would like to know if today, hopefully there is a solution to this problem of bluetooth.

  Thank you
  Antonio

  Hello

  Well, the Satellite A60-122 has no Bluetooth. In this case, you will need to use the 3rd Bluetooth driver and the device.
  In addition, the Mac has a completely different operating system and you can not compare the two devices.
  Unfortunately, I can't give you a correct answer, why this problem occurs. You should check if you are using the correct drivers. You should especially drivers for Windows OS.
  In my opinion, you should ask the manufacturers of the ItelliMouse for the support.