Yoga battery 13 stuck at 5% "blocked, do not load.

Similar Questions

• HP Pavilion dv7 - 2277cl "blocked, do not load"-HELP!

  HP support team,

  First of all, I really want to thank you for holding this type of support.  I have technical questions for laptop and it happens to be your guy - for Expert days how unfortunately had the chance of me!

  I have a 4 years old HP Pavilion dv7 - 2277cl, Windows 7 operating system. I had a problem for months now with my recharge battery.  Whenever I plug in the AC adapter, it is said "plugged in, not charging."  For the last two months, I was able to get away, stirring the adapter so that it can load, even if my method 'all or nothing' does more work.  I opened the Device Manager and updated the three drivers under "Stacks" (which were all updated), tried to uninstall the Microsoft ACPI Compliant Control and restart my laptop (nothing has changed). I tried to stop the laptop and tried to turn it back on with only the AC adapter is plugged (who doesn't) and even calibrated my battery - who only left until the point where I have a charge of 5%, and it has connected for more than 12 hours...

  So, somehow the battery IS loading, but only when the laptop is turned off. While the battery icon is always displayed "blocked, do not load," the battery changed miraculously since a 38-78% more than a day to load (stopcock).  Ditto for when I calibrated the battery somehow it responsible for a charge of 5% of weakness, but full of hope...

  The culprit would be the battery, the power adapter or the laptop itself? I am a broke college student so it would strain my wallet to get help in the store, I am looking for help!

  Desperate and concerned,
  Princess of pop corn

  If you turn on the laptop without the power adapter there is of course a mistake with the AC adapter. Substitute must address your situation.

• Equium M50: State of battery power remains on 12% and will not load

  Hello.

  I bought my M50 about 6 weeks knowing that I had a few years of work in Goa in India. My problem is since I got the bloody thing works with the charger connected. The battery shows that 12% full and go any higher.

  I put a meter on the charger and it seems fine. A local computer repair shop suggested that maybe it's an internal fuse that blew, but he would need to open the laptop to change. This would invalidate my warranty.

  The closest Toshiba repair center is in Mumbai, which is almost 600miles away.

  What should I do? Help!

  Hello

  If it of not possible to charge the battery, so either there is something wrong with the electronic power supply on the motherboard or the battery has a malfunction. I guess that the battery could be defective.

  However, according to your assignment, the laptop is about 6 weeks old and the guarantee must cover all replacement. I n t recommend trying to solve the problem yourself, because of the warranty. Moreover, I don't think you have enough experience and the tools to locate the fault.
  Unfortunately, I put t see any other possibility as to contact Toshiba service partner in your country. I'm sure guys will help you.

• replace battery on laptop aspire 8930g, it does not load what can I do?

  the battery icon says plugged and charge but nothing happens

  Hi Silvano,

  This problem may occur due to hardware problem.

  What version of OS are you using?

  
  Method 1:
  I suggest you run the Microsoft fixit tool and check.

  The problems of power consumption and extend laptop battery life
  http://support.Microsoft.com/mats/windows_battery_power_settings/en-us

  Method 2:
  If your operating system is windows 7, I suggest you to return the item and check if that helps.

  Solutions to common battery problems
  http://Windows.Microsoft.com/en-us/Windows7/solutions-to-common-battery-problems

  If the problem persists, I suggest you to contact the manufacturer of the computer, because this can be a hardware problem.

  http://www.Acer.ca/AC/en/CA/content/service

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Dell Inspiron M5110 battery says plugged in, but it does not load

  just got my counter M5110 & battery for dell inspirion says connected but does not support. How can I fix?

  Hello

  Thank you for contacting Microsoft Community.
  Did you reboot your PC then were? If it fails, remove the battery after turning off the PC and the attempt to insert the battery and check for the load.
  If it fails, go to the settings of the BIOS (press F2 during the Dell screen on startup). Check if the charing is disabled or enabled. Turn it on, save and exit settings.
  If that fails also, turning on the PC with the battery and charger connected and turned on. Now directly remove the battery and then insert it again after a few minutes.
  If this also fails to solve the problem, contact Dell support for assistance.

• MacBook Air battery does not load after resetting SMC

  

  Hi all, hope you can help me with this. My model of Macbook Air early 2014 seems to have some problems with its battery. The battery status says "do not load" and it is stuck at 74%. My charger light is still red and I tried to check the status of the battery, it is said to be normal; also I have reset the SMC and all that stuff that is suggested on the discussion Forum, but still it is of no use. Someone had a similar problem before?

  Try resetting the SMC two times more.

  If this does not help, please contact Apple support.

  https://support.Apple.com/contact

• Yoga farm 900s does not load

  Hello

  I have a new Lenovo Yoga 900 s. Everything worked fine until Windows has automatically installed upgrading birthday last night. Now, the battery won't charge. Fortunately, the laptop seems to run on a/c, given that the battery does not empty. But it does not load.

  I checked the power management settings, and I tried to uninstall the compatible Microsoft ACPI control method battery driver. But nothing has solved the problem.

  Please let me know if you have encountered this problem.

  Thank you.

  So, after an hour's conversation with Lenovo support, this is what finally worked.

  -Update the BIOS

  -Reinstall Lenovo settings app

  -Uninstall method battery driver control compatible ACPI Microsoft

  -Restart the computer

  Worth has shot if anyone has the same problem with their Yoga 900 series.

• DO NOT LOADING of the BATTERY Lenovo Y580

  Please help ASAP! I connected my laptop to load and its stuck at 56%. It says "plugged in, not load ' I disconnected and reconnected it but without success. What I'm doing! ?? !

  Hello, you can check this http://forums.lenovo.com/t5/IdeaPad-Y-and-U-series-Laptops/Z570-Battery-plugged-in-but-not-charging-...

• Yoga 2 Pro: iPad 4 will not load on all USB ports

  Hey

  Just got a Y2P a week ago and always try to understand all the ins and outs.

  Current issue: I plug my iPad 4 to one of the two ports USB, but both ports cause the iPad to say "Do not load"

  USB ports on this low powered computer? or y at - there a setting im missing somewhere... ?

  Energy Manager a loading USB enabled for the mode in which I am

  Thank you!

  the usb port on the Yoga 2 Pro iPad will trickle charge, usually during the night, it will charge about 40% of the total battery.

• Want M4 - dies of the battery during heavy program use, nearly does not or very slowly thereafter

  What happened:

  On my laptop HP Envy M4-1015dx, I just changed a large image file in Photoshop, probably using a large amount of the work disk. In the background, I had another Adobe program running even though I had not committed the application within a few hours before. Google Chrome web browser was also opened in the background, with a lot of tabs open. Thus, the load on the processor of the computer /? was really heavy.

  At this point, the battery died and the computer turns off later. I plugged to a power source shortly after and you press the power button to turn on the laptop. The laptop starts and went to the Welcome screen, I entered my password and the laptop is stuck on the 'Welcome' screen that loads before opening on the desktop.

  I pressed the power button to turn off the laptop and again to turn it on. At this point, everything loaded very slowly. Screen where to enter the password moved extremely slow, taking at least 5-10 minutes to accept my activation key and begin to load the desktop.

  Using any other application did not work, they became unresponsive. Tent a restore of the system took more than 30 minutes just to set a restore point and 'prepare' the computer for a restoration of the system. I could never complete a restore, I got an error during the process of preparation.

  I can't help myself to try and fix the problem? It seems that the processor is just overloaded with even the smallest tasks now. Thank you for your help.

  Your HARD drive is dead looks

• Updated my iPhone6 to ios10 and now my battery heats up and does not load

  Updated my iPhone6 to ios10 and now my battery heats up and does not load

  I have never experienced this with another iPhone or iOS version

  Of course, it's a problem because I use my phone all day

  What troubleshooting steps have been taken so far?

  Have you completed a reboot, reset or restore such as recommended by Apple?

  Best,

  GDG

• Battery of remote control Apple TV does not

  My Apple TV remote 4th generation does not load. Kept connected for more than 24 hours, reset.. bug that it still doesn't load. It works when it is connected to the power source. How can this be repaired? Is it possible to change the battery? If so, how? Thank you.

  Return it for a replacement

• Flash stuck on a site, do not charge not (still invisible) and has no error message

  Hello

  I like listening to a radio station, but every time I open their website the player built on top is simply not visible at all. It should be just above the add element, but it does not load: http://i.imgur.com/e14UPsy.png

  The site uses flash, but I flash (later) and have no problems on other sites using such as Youtube, Dailymotion or Vimeo. It is also listed in my add on the page and checking Web site runs correctly.

  However I can't do a lot on the radio site, because nothing is visible on the player.

  The website is: http://seoul.fm/

  I tried IE which I use only to see if something is a browser issue or a problem of site and the player is loading properly in this browser.

  I get no error message, pop - up or anything like that when visiting it through Firefox.
  I also installed the last Javaa to see if that was the problem and he checked the website Javaa which he works.

  Flash is not blocked in the add menu.

  I've disabled all my add block extension to see if it caused the problem. No results.

  On IE, I need to activate Flash runtime to run it.
  I don't think that it is a Javascript problem but Flash script (I said in a response that maybe it's java partner but that is not true, I think).

  Hi BlueWaffle, I should have checked before: after that I agree the Flash, I hear no audio, either.

  What I see in Google Chrome, it's that the player uses the HTML5 audio tag and Flash is only used in the comment box. If Flash is not the problem. The problem is that the script that generates the area of the drive is not running. This page is very complex, using plenty of write-back loading, and I can't follow it very well. After 45 minutes, I give up.

• I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset on AEC

  I bought the IPad Pro 128 GB on 3.29.2016. I used it for less than a week. It charged when I first opened it from 67% to 100%. 9.3.1 update.  After about 5-6 days, the battery is down to 1%, and now it will not load. I have reset to factory settings and it still doesn't load. There's just 1%. Help, please.

  Thank you

  Katie

  It is under warranty. Suggests taking it for an Exchange.

• Blocker in Safari content does not load Web site

  Today, for the first time, Safari 9.0.3 will not connect me to Ancestry.com.  I checked all the preferences of Safari and nothing seems out of the ordinary.  Finally, looking at the console in Safari > menu to develop, I can see that a content Blocker will not Ancestry.com load.  How can I fix it?

  Check your third-party plug-ins extensions Safari and here.