300-1025: recovery disks

Similar Questions

• HP Touchsmart PC 300-223: recovery disks

  I need the Moose recovery disks for my PC. Or for the number of build A1NAv6PrA8, I ordered some but it was for the build number

  A1NAv6PrA9 and they do not work and I had to replace my hard drive with a cause drive WD Blue 1 Terabyte hard, I had a 750 GB hard drive which went dead.  When I try to use A1NAv6PrA9 disks they eject just when he says you want to restore your computer to factory settings.

  It is a forum for helping hand in hand. The only presence that HP has on this are Admins and Mods. Otherwise, none of us works for HP.

  Here is a guide to help you order the correct system recovery disks.  If you ordered them properly the first time, but received incorrect records, you must contact the HP Customer Service to replace them.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Cannot start on Qosmio x 300 recovery disks

  Hello everyone
  I just got my Toshiba Qosmio x 300 - 13O return of repair today.
  It was a note that they had replaced the hard drive, so I have to reinstall everything.
  OK, no problem, I have some recovery disks to handle this.
  Problem is, when I start the computer, it says:

  Intel UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - MOF: Exit PXE ROM.

  It's pretty strange, I thought, so I checked if anyone else had a similar problem.
  One of the suggestions that I could find was to check the BIOS boot configuration, which I did with no effect.
  Another suggestion is to disable the LAN, which I also tried, but... after reboot, it says:
  Operating system not found.
  I also tried resetting the BIOS with no effect factory settings so my question is quite simple, what to do now?
  I will not open the computer because I'm worried about my warranty so any help is appreciated.

  Hello

  Have you ever used recovery disks in the past?

  At first you can not use some recovery disks but the disks with recovery designed for your model laptop image. I have a Qosmio x 300-14 x and I have 4 discs for her recovery DVDs (self created).
  This message occurs if the OS is not installed on HDD and recovery disc doesn t start.
  In the trunk, the order is listed LAN too and if the list of all bootable devices in front of LAN can not start then you will see this message and there is nothing unusual.

  So please use just original recovery discs.
  Start your laptop and press F12 repeatedly
  When you have the menu with all bootable devices, place the recovery disc 1 into the optical disc drive.
  With the up/down arrow buttons to choose the CD/DVD drive and press ENTER.

  Just follow the menu on the screen.

• Looking for Toshiba Satellite A305-6829 recovery disk creator

  I bought the laptop Toshiba A305-6829 * without a recovery disk * in the United States. Due to the decrease in the speed of the laptop I want to reinstall Vista and factory setttings. But I realized that its impossibe unless I have a recovery disk ' right?

  Then I also realized that my laptop * recovery software is not installed *. I looked for it on the internet. But I found nothing.
  + * What should I do? * + is there any creator of spare recovrery for Vista and also fits my situation?

  I also want to ask there is 20 GB missing from my hard drive (it must be 320, but seems like a 300 GB). It is a recovery partition? If this is the case; Why can not I saw him on 'my computer '?

  Hello Aokank

  On this forum you can find many useful sons on new models of laptops (like your) and recovery. I can write the whole strory about and explain how it works, but there is a problem: I am originally from Europe and you have a portable US model.

  I'm afraid that the principle can be a little different as here in Europe.

  So I recommend you to visit us Toshiba forum under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 and I hope that someone can give you a precise answer to all your questions.

  Good luck!

• HP 300-1020: recovery questions

  Hi all

  HP Touchsmart 300-1020 all-in-one

  OS is Windows 7 64 bit

  I recently bought the Touchsmart 300-1020 and many issues.  I intend to do a factory reset to solve most if not all of the questions, but when I put in place the Recovery Manager, it does not give me the choice to reset to factory conditions without the help of recovery disks.

  Is it because the 300-1020 was not manufactured with a recovery partition recovery without disks using wildly or could the partition have been corrupted somehow?

  The next step was to make a record of recovery, but but the creation of HP recovery disks does not see the recovery partition.  To quote the message, "the recovery partition is not found" Image icon factory next to the HP (C indicates 12.7 GB free of 12.8 GB.)  There is no files contained in FACTORY_IMAGE (D in addition, at the opening of the creation of recovery disks, I read that it could be a set of recovery disks created.)

  If the first owner created these disks, which would be why there is no files in the original Image (D?)

  Next, I decided to do the best I could to fix the problems manually, but they proved to be many.  There seems to be issues with "Touchsmart Homepage" as well.   Photos see toward the top in the home page but music and videos in different files are not visible.  It seems that the best move is to buy the necessary dics and get things to normal as far as I can get them again.

  Which leads to the third question and I hope I was descriptive enough for someone to answer: a set of recovery disks will bring this computer to a State factory reviewing the questions I mentioned with particular reference to the absence of the recovery partition?

  Thanks for all the tips.  I think that I have now found the right place for what will be displayed.

  Ambico

  All new HP computers come with a recovery partition.  It is possible that the original owner somehow altered the recovery partition or delete its content.

  The only way to bring the computer back to life would be to order the HP recovery discs.

  If you live in the USA/Canada, call this number...  1-800-334-5144.

  If you do not live in the USA/Canada, call the support number HP business PC for the country where you live.

  http://h50146.www5.HP.com/lib/doc/manual/desktop/b usiness_desktops/6005us_332630_007.pdf

  If HP does not, you can order them from the computer surgeons who have them in stock:

  http://www.computersurgeons.com/p-18102-Windows-7-Premium-64-bit-94nav6pra1-recovery-kit-gv405av-for-HP-model-number-300-1020.aspx

• Re recovery disk - install the OS after upgrade HD

  I bought my HP a little more than a year, and the hard drive just died. Of course, the HP warranty was only good for a year, even if the warranty of the manufacturer for this HD model, when purchased separately, is three years. It would be nice if HP has extended the term of warranty even for components which he uses as the manufacturers of these components, but I digress.

  So my only choice was to buy a new HD. I decided to update as long that I had to reinstall the OS anyway, but when I tried to reinstall the operating system using the recovery discs, I received a message that the installation could not proceed because the size of HD did not match what my computer was built with.

  It has to be a way around it. If it does not exist, it is a horrible feature that prevents people from upgrading their systems, or recover their systems in the event of a failure of the HD. If there is no work-around, then my only option is to purchase a retail version of Windows 7 and other software that came with my computer. It's probably $300 in the software, as well as the replacement of HD $200. Ouch. If this is the case, and I knew about this beforehand, I would have never bought a HP.

  Thanks for any info.

  _glitch_ wrote:

  HP Pavilion Elite e9250t

  Prod #: AW019AV #ABA

  The OS is Windows 7 Home Premium (64-bit)

  The original HD was a 640 GB Western Digital HDD (WD6400AAKS)

  The new HD is a 120 GB OCZ Vertex 2 SSD

  Hello _glitch_, I understand your frustration with the whole restore HP Recovery disk.

  There may be an option to work around this problem, but it would need to buy another HDD 640 GB that you were originally in the HP system, but continue to use your new OCZ Vertex 2 SSD 120 GB drive.

  Here a link to the OCZ Forum where information to make a disc image of Windows 7.

  Here a link to NewEgg where the 640 GB Western Digital HDD (WD6400AAKS) can be found. (Note the comments)

  You can buy this new hard drive and install it. Then use your restore HP Recovery disk set to recover your operating system and applications.

  This should put your system back as it was when shipped. After having updated your system software and all personal preferences, you could then make an image of the WD hard drive and save this image on another hard drive, or you can create another partition on the WD hard drive to store the image C: on.

  If you choose this approach, you must leave the installed WD hard drive and install the new OCZ Vertex 2 SSD 120 GB so the picture C: drive is accessible from the new partition hard disk WD.

  You then couuld use the Bootdisk you did in the process of hard disk image, to Prime the system for, and then select the source where the image of the original hard drive has been kept on the new partition on the WD hard drive, and use that image for installation on the new OCZ Vertex 2 SSD 120 GB drive.

  The new WD hard drive could be used as a backup hard drive, so you lose no money, having to buy the new WD hard drive.

  I know that all this is a bit extreme, but just an option to recover your operating system and applications and be able to use your new OCZ Vertex 2 SSD 120 GB drive and gain a new WD drive for backup purposes.

  I have the impression is the reason why HP does not allow these restore disc HP Recovery be used on a hard drive of different ability, to prevent users from making copies of the software on a different drive system hard.

  Just some thoughts.

• Impossible to restore or recover a Pavillion dm4 with recovery disks.

  I did a complete diagnosis of the hardware test and all the tests.

  I can't access the recovery via the main menu, since I get a BSOD.

  I ordered HP recovery disks and received them yesterday.   Tried to install unsuccessful recovery disks.

  I called iguru in India and they crossed me to see if I could get these discs to work.  No luck.  At every turn, I keep getting the BSOD.  They referred me to the HP support.

  Support HP told me wish either the warranty (warranty expired a month ago) or send it inside for repairs at $250-300.  I don't have that kind of money laying around.

  Question: Is there something I'm missing?

  Pavilion dm4

  Model # dm4-1065dx

  Windows 7 64-bit operating system.

  Hello

  I would try completely wipe the hard drive first and then reinstalling the operating system.

  Download and install Killdisk on the link below - (this application will write zeros to the entire disk).

  http://Software.LSoft.net/KillDiskSuiteFree-Setup.exe

  Download and install ImgBurn on the link below.

  http://download.CNET.com/ImgBurn/3000-2646_4-10847481.html

  Access the application of disc kill you have installed in all programs, open the main folder, then select Bootable Disk creators, then the BACK Bootable CD Creator that will burn the ISO on a blank CD bootable.

  During the following process do not worry about all warnings as your recovery DVDs will reformat the HARD drive.

  Insert this CD into your PC which is unable to load the operating system properly. Close Notepad, and then start again to boot from the CD of Killdisk and follow the instructions on the screen to kill disk.

  A brief description of the process here is Killdisk.

  Use it to wipe the entire hard disk, highlight (80 h) and press f10 (you will also find Hague to enter a confirmation and press enter) - ( This will make sure to include all of the partitions , and then start the process - this may take a few hours!).

  When the process is complete, remove the CD from Killdisk, insert your first HP recovery disk and then hold the power button until the laptop turns off then restart the laptop to try the installation again.

  Kind regards

  DP - K

• HP Pavilion p6 2000-ukm: recovery disk/boot on a new HARD drive?

  Hello

  I have a hp Pavilion p6 2000 ukm. Recently I started getting on my HARD drive error messages, saying it was a failure. I recently bought a new HDD in my pc. I connected it correctly and it says that I need recovery disk / boot disk.

  To my knowledge when I bought this pc there was no disk Windows 7. Now I know on workstations, you create your own.

  My question is... How to get windows 7 installed on my new hard drive when I plug it in? I'm looking for the iso of windows 7, I think that his name, but I can't find any .iso file.  I'm trying to install windows 7 on my new drive HARD I need not my other files like music... etc. I'm looking to get my HARD drive installed with windows 7, where it has IE and I can go back to the installation of everything I had previously. Should u use "create a system image"? Its a big file and requires 7 + dvd discs is my only option? I have my 25 key windows 7 as well.

  Any help is thank you attended.

  Hey,.

  Here's the phone number,

  02076600596

• Bought the new model of HP m8530f... impossible to create the recovery disk?

  Bought above the pc about 3 months... still new to all this, I'm just a simple user of office applications and surfing.  Fallen on the disk recovery and reading that you can create your own recovery disk or the order of HP.

  Once again, the pc brand new.  I was all order from HP, but saw wanted to try to do it myself and save $20.  I followed the steps, arrived at Recovery Disc Creator, the moment where I click Next I get an error like this:

  "A recovery disk set was created for this pc. That one game is allowed per pc.

  WTF?  It was brand new, out of the box!

  All this experience?  I really don't want to pay HP $20 when I can make myself at home.  However I can not because as the "already created recovery disc?

  What can I do?

  I was able to connect and discuss with a representative of HP.  They have made an exception and will betray me a free recovery disk!

  Now, that's service! That means a LOT to me!

  Thanks for your suggestion to CherylG!  I have not found this file, that you suggested... and not an expert to change the extensions of file... so don't go any further!

• Recovery disk

  Tried to use my recovery disks but says to contact Hp Support Hp.Called but said they no longer support my HP Pavilion 8694F.

  I need to get NvCpIDaemon in NvQTwk.Also DVD player does not play. Freezes after 30 sec.of running. Is it related to the

  missing entry? I thought that if I used the restore disc I would solve the problem. Cannot use the original disc. Help would be deeply appreciated!

  You get an error message?

• EliteBook 850 G2: SimplePass absent of the software recovery disk

  Hello

  First of all, I don't know if I post the question in the right place, and I apologize if I'm not.

  I bought the laptop with windows 7 and received two CDs with it, one for install windows 10 and the other to re - install the software that came with the computer.

  I used a program before moving on to Windows 10 * that has been activated with my finger, saved my passwords, and I was able to connect to my windows with the fingerprint account.

  After the upgrade to windows 10 and install all of the software contained in the software recovery disk, I can't find this program.

  This software should come in the recovery disk? Why is it missing? How can I get that again?

  * which I'm not 100% sure it was SimplePass

  @hpatricia

  Your enterprise class system uses a software Client Security (not SimplePass).

  Page of the site system Web pilot:

  Laptop HP EliteBook 850 G2

  The Synaptics (fingerprint driver) driver is in the category

  Driver - keyboard, mouse and input devices (5)

  Download Driver Synaptics and information Page:

  Synaptics WBF fingerprint driver

  

  The security software is in the category

  Software - security (1)

  Client Security download and information Page:

  HP Client Security Manager

  

  Load / install the fingerprint Synaptics first driver >

  Restart and sign

  Windows key > settings > accounts > Sign-in Options >

  Assign an identification number (Security Windows requires to enable the fingerprint reader) >

  Activate the connection of fingerprints

  Once the Windows PIN / fingerprint is activated, load and install the Client Security program >

  Restart and sign

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Satellite A500 - problems with the creation of recovery disks

  Hello
  I bought a Satellite A500 yesterday and now I'm trying to create the recovery discs before anything else.
  However, towards the end of the 1st DVD I get an error message saying "Faile dto open the next file. e:\Boot\BCD (0201123-F1-00000000 error code)"and then when I click 'OK', the DVD is ejected giving a message"unable to create recovery 1' media. Physical examination, I noticed that the DVD is written almost entirely.

  Any advise on this? In addition, in the interface, it shows a USB option and says to insert a USB media with more than 7 GB of free. That I can use it to create the recovery disk? If Yes, when I reinstall windows 7, this allows as a bootable drive?

  Greately appreciate any help on this matter. If it is defective, I want to return as soon as POSSIBLE.

  Thank you
  Mercier.

  As far as I know, that you can not use external device for recovery, it is therefore very important create recovery DVDs.

  Try to create the recovery disk using only DVD-R media. Use high quality media like TDK or Verbatim.
  Last month, I've created on the Satellite A500-157 recovery discs and everything went well.

• Satellite Pro C660-1LR - new HARD drive but no recovery disk

  I need help for my son who is the Satellite Pro C660 1LR laptop.

  In this portable hard drive is completely dead, I have not created a disk of recovery for this system of portable computers.
  I bought a new hard drive that is installed... However, as you guessed it I have no access to reinstall an OS, this laptop works on windows 7.

  I'm not really tech savvy so if someone can advise me please do explain to the fool proof format! I try to avoid having to buy something expensive.

  > I'm trying to avoid having to buy something expensive.
  Problem is that you don't have many options in this regard.
  If you want to have the factory again settings you must install recovery disc. You can order on https://backupmedia.toshiba.eu/landing.aspx of course is not free, but, in my opinion, without a doubt the best solution.

  You can buy the Microsoft installation disc and install the clean version. You must purchase a valid license for it.
  In this case, you must install all the necessary drivers, tools and utilities for more than one by one.

  Just in case you can get this installation of Microsoft and the free license you can save money.

  Believe me, the best solution is the original recovery disk command.

• Satellite A30: How to get the recovery disks?

  I damaged my recovery disk 2 on my A30. Where can I get replacement?

  You will need to contact the ASP in your country for ordering CD!
  These CD's are not very expensive one I m that you can buy the recovery CD for Toshiba service point!

  Please visit this page to find the nearest ASP in your country!
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

• Lost recovery disk Toshiba Satellite A50

  I am currently in the United Kingdom. I bought my laptop TOSHIBA to Hong Kong in 2004. I lost the recovery disk and cannot restore my laptop after the recent attack of virus on my laptop.

  Please let me know how I can get the recovery disk. The operating system is Win XP Home edition.

  Usually, the recovery CD can be ordered from EPA, which is responsible for your country.
  Try to contact the guy and ask the new CD/DVD.

  Here you can find of Toshiba global ASP.
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Greetings mate ;)