You 2 pro - screensaver turns is not on and / or pc do not go to sleep

Similar Questions

• Windows Mobile 8 turns is not on after sleep.

  I have a Haier laptop with windows 8 is installed. Few days back my laptop got problem with mode 'sleep', it might be light not after sleep and I had to stop it to turn it on. This time after sleep, I tried to turn it on, but it has been set for the auto repair, after some time it says "Your PC couldn't be repaired" with options like system restore, refresh, reset, guest... Whenever I turn on the same process repeats... Now what should I do? Any suggestions?

  Since your laptop now Windows 8 OS, you will have an error "the inserted media is not valid" when inserting it with Windows 8.1. To get this fix you are trying to insert the media Windows with Windows 8 OSrecovery or installation. Then, try to update your PC or reset your PC. Otherwise, you must reinstall Windows 8.1 with your media recovery instead of use the refresh or Reset.

  Kind regards

• Satellite Pro U400-130 will not stay in sleep or Hibernate

  Hello

  My laptop don't stay in sleep or hibernation. I use Win XP
  Within 60 seconds it enter standby or hibernation mode it re-sboots!

  It is connected to an optical mouse of WiFi, a hub, the power adaptoer and speakers - all these fact don't disconnect any differnece.
  HELP!, through the

  Hey Buddy,

  Please check the BIOS for the following options:

  -Wake up on keyboard
  -Wake up on LAN
  Sleep - USB & Charge

  If you find these options, disable it in the BIOS. After that the laptop should stay in standby or hibernation properly. :)

• ElitePad 1000 G2: Sleep button does not work for sleep

  Dear community,

  I have a problem with my HP ElitePad 1000 G2: after a few updates sleep button on the device has become idle to send the unit in standby mode. It works for starting Windows from Power Off, it works for the dialog box to Switch Off if you push 5 sec. But it does not work if you press briefly just to fell asleep.

  I tried several times to configure the Power Options settings (power button configuration: all options are set to sleep for button / stop and sleep button). I don't know what to do. Help, please!

  Thank you

  Vaso

  Hi Vaso,

  Yes I know. This is no solution ;-)

  I'm sure that: when you uninstall the WWAN module (do not reboot) the sleep button is working again! ;-) Please try it out.

  I have this problem on all our shelves.

  The problem is the Intel driver on the HP site.

  Please give us a feedback. I'll do some tests on my site also thereafter.

  concerning

  Peter

• Oficejet Pro 8600 Plus seems to disconnect and docs does not print unless it is turned off then

  I have a Dell with Windows 7 dekstop. The HP Officejet Pro 8600 Plus is connected wireless and worked well during the past year. The only change of note is that an old belkin wireless router died and was replaced by a new Belkin wireless router which seems to work very well. My Office recognizes the printer and my printer recognizes the router on my desktop

  The problem is that it seems my 8600 turns standby or offline after a certain period of time of inactivity and when print jobs are sent to the printer either by OIOS or by different laptops in the House, nothing prints. My desktop printer that actually tell me job is printing... then it says error, printer offline. However, printer is on and says that it has strong wireless internet at any time

  A single difficulty has been to put off the printer (via button on / off) turn it and then turn it back on and saved then print print jobs. In addition, the new print jobs launched fly right by fine. Then the next day, the problem repeats

  I just unplug printer a surge protector and moved to a wall outlet directly by something else that I read. I use kapersky security system causing no problem before the beginning of the question.

  I have disabled the option to turn on printer for some time and stop at another time to remove this as a cause.

  Dell and Belkin two saying its a HP problem since the printing run after the printer out of power, and then power on, but I am running out of ideas to try to stop.

  Bill O'Connor

  These settings are to set up your wireless printer to stay connected to your router, wireless devices stay better connected and makes your router secure and hack proof.

  1. define a static in the printer IP address (click here) out of the DHCP of the router Beach (check your manual).

  It is for Linksys routers, but can be used for all routers. Check your DHCP range and change this

  first of all if necessary. More Help Wireless Printing is here (Windows solution 4, static IP).

  2. check the printer "Auto Off" is disabled.  Use the built-in webserver (EWS) by going in the

  the printers IP address in your browser's address bar, click Settings tab/Auto Off. Or use the printer

  Assistant, printer Home Page (EWS).

  3. If the printer supports and has IPv6 enabled, disable the IPv6 option in the printer.

  4. If necessary and you have assigned a static IP address, try using 8.8.8.8 for the preferred DNS server and

  8.8.4.4 at the level of the auxiliary DNS server.

  In the router: (refer to the manual of your router for more information)

  5. use a wireless channel fixed as 1, 6 or 11, never 'auto', try channel 1 first then the rest.

  6 choose the router to 20 Mhz only, or 145Mbps router function.

  7. always use WPA2-AES encryption (personal), but you can try the "mixed" mode

  8 disable the WPS and never use it and disable the UPnP for the security of routers. No one can hack into your

  now the system and helps with wireless connectivity (if you want to know why, research on the web).

  9. If you have a router dual band (2.4 Ghz and 5.0 Ghz bands), make sure you the SSID is NOT the same.

  they must be different for all the bands, even for networks without comments.

  10 broadcast SSID must be enabled.

  11. save all settings. Food at the same time, wait 2 minutes.  Power on router wait 2 minutes.

  12 turn on the printer and check that it reconnects to the router.

  Windows 7/8/8.1 is discovered the system on or off?

  1. Control Panel/Network and Internet/network and sharing Center / advanced sharing settings.
  2. Under home or work (current profile) / network discovery.
  3. Select "Turn on network discovery" and save the changes.

• Is it safe turn off an officejet pro 8500 a when not in service.

  Is it safe turn off an officejet pro 8500 a when not in service. The electricity in my area off two or three times a day and every time that happens the printer begins once again reset. I'm afraid that whenever it cleans the printer heads is a waste of ink.

  Hi fernan215,

  Yes, turn off your printer when not in use. A fluctuation of current or failure can cause more damage to your printer when it is still on. You are also right that the printer is cleaning the heads and align the cartridges every time it is turned on. This is to ensure stability, good maintenance and calibration of your inks for the best output every time.

• I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  I improved my 5s IOS10 3 days and battery discharge excelerated standby, as well as when you use. I turned off notifications, as, other non when not in service. Which could operate in the background?

  Hi mweedn!

  I understand that you see a reduction in the battery of your iPhone 5s after updating to iOS 10. It is important to be able to make full use of your iPhone! There are a few resources that can help.

  Before the resolution of the problem, were you able to view information using your battery on your iPhone? Here's how to check the amount of battery used by each application:

  On the use of the battery on your iPhone, iPad and iPod touch

  When you answer, remember to let us know if you see all the apps with an abnormal amount of battery. See you soon!

• MacBook Pro froze access to iCloud tent and now I can not turn off my computer

  I am writing this note on a computer that has locked me out of cold button Poweroff or reboot. My system preferences requested my password, I entered, press "Sign In" and he currently "try to connect" for about 15 minutes now.  I tried clicking Apple-> restart, ctrl + alt + delete and the power button. My computer does not restart, saying that preferences system interrupted stop down. But I can't quit System preferences. My questions are twofold:

  (1) how to turn off my computer and restart it?

  (2) how do I remove this computer iCloud? Or at least prevent it from connect to iCloud? It never worked and it just bugs the heck out of me.

  To force the closing down, hold the power button until the screen goes black. You may well find that the connection attempt is not reappear on a restart; You should if you want to be able to go to system preferences > iCloud and click on disconnect.

• guys I need help last night I tried to install alcapitan update of my macbook pro, but it did not work and it make me an installation message you cannot be finshed I need help please

  The guys that I need help please,

  Last night I tried to install the update to alcapitan to my macbook pro, but it does not work it makes me a message (your installation cannot be finshed) and many many things and when I try to strt my macbook still keeps it install the updat and then get the message again...

  I need help please

  Hello, check if the mac you can use El Capitan. See the information update of OS X El Capitan - Apple Support here

• OfficeJet Pro 8620: WiFi will not turn off

  Because of a problem with my modem compatible wireless (the problem being that its ethernet ports became defective), for awhile, I had turn the WiFi feature to provide Internet connectivity to my iMac.  Similarly, for the first time, I enabled WiFi on my HP Officejet Pro 8620 so I could keep a printing capability.

  Once my new modem arrived, I restored my complete ethernet network between the modem, my iMac (and other devices) and the Office jet printer 8620 Pro.  Everything works fine now!

  However, the printer Officejet Pro 8620 WiFi ability not shut down despite the operation by an ethernet cable and there is no WiFi from my modem.  I know the Officejet Pro 8620 always emits WiFi like my iPad and my iPhone indicate that it is.  As my wife is concerned about these RF transmissions that are on the other side of the wall adjacent to our bed, she asked me to turn off the Officejet Pro 8620 WiFi.  I've restored the "Default network" printer, but this is not the case.

  According to the instructions of the printer, 'Wireless does not work with an Ethernet cable connected to the printer' However this is clearly not there.  How can I solve this?

  Your WiFi is turned off.  Your wireless Direct is not off.  Disable wireless directly into the printer.   Info is in the User Guide.

• I have XP and that you want to upgrade to XP Pro, but Windows will not let me.

  My office recently crashed and I replaced the windows XP home that came on the machine.  I also have a copy of XP Pro upgrade that I want to install because pro allows me to office remote host and does not House.  These are both legally purchased copies.  When I try to upgrade to pro it won't let me and warned me that the original desktop version is newer than the upgrade.  I don't like the age I want the features I paid for the upgrade.

  All solutions?

  1. determine what service pack is now installed (right click on desktop and select properties).  You must have service pack 3, but if you have recently reinstalled Windows XP Home Edition, you may have neglected to update at this point.

  2. either consider that if you have a CD for an earlier version of Windows (98, Me, 2000), you can do a "clean install" of XP Pro by booting from the CD-ROM to upgrade XP Pro and then insert the qualifying product CD when asked.

  3. If you want to 'upgrade' to protect the applications and data already installed on XP Home, first back up your data (just in case).  As indicated in the error message, your upgrade installation CD must be equal or superior to your current installation of XP Home service pack level.  Compare the service pack level of your installation of XP Home (see 1 above) and the level of service pack of your XP Pro installation CD.  Then create a CD slipstreamed that combines the real CD XP Pro you have with the correct service pack.  There are many instructions for this on the web.  See http://lmgtfy.com/?q=slipstream+xp

  I suggest that you use nLite (see the first hit in Google search above).

  If your XP CD Pro has NO service pack, you must first integrate the SP2 and then sp3 wake in this.

  If your CD of XP Pro at service pack 1 or 2, you can integrate service pack 3 (for example, you can go from 1 to 3 without add 2).

  Download the file from the service pack 3 Setup here--> http://www.microsoft.com/en-us/download/details.aspx?id=24

  If necessary, download the file from the service pack 2 installer here--> http://www.microsoft.com/en-us/download/details.aspx?id=28

• When you try to install Adobe Standard XI, he says: "Setup has detected that you already have a more functional product installed. Steup will stop now. "I have a trial Pro installed but do not sow the feature so much so I bought the standard.

  When you try to install Adobe Standard XI, he says: "Setup has detected that you already have a more functional product installed. Steup will stop now. "I have a trial Pro installed but do not sow the feature so much so I bought the standard.

  Uninstall versions acrobat and reader, if you have a win os clean (Download Adobe Reader and Acrobat tool - Adobe Labs), and then install acrobat std.

• How can you download pro Prime Minister when the icon does not exist in the clouds? [was: pr]

  How can you download pro Prime Minister when the iucon doesent exist cloud?

  In order to download the software, your computer must meet the system requirements to run the software.

  http://helpx.Adobe.com/x-productkb/policy-pricing/system-requirements-Premiere-Pro.html http://www.Adobe.com/products/premiere/tech-specs.html

  The usual for not being able to download reason is that Premiere Pro (and other video applications such as After Effects) are 64-bit only what they need for a 64-bit computer and a 64-bit operating system.

  If you use a 32-bit computer and operating system, and then you see the icon of Premiere Pro as the software will not work on your computer.

• Satellite Pro A300D-152 - can not turn on the S-VHS output

  After I installed Windows 7 (32 bit), I can't turn on the S-VHS output (TV).

  Any solution?

  Hi Longhorn_1,

  First of all, you should check if the display driver is installed correctly. This means that in Device Manager it should t be any yellow exclamation point.
  New drivers, you can download from the official page of Toshiba.

  In addition, you use output S-video if you press the FN + F5 key combination.
  Generally you must connect the S-video cable first, before turning on TV/laptop. After that turn on your TV and select the S-video port and then turn on the laptop. FN + F5 key combination to switch between monitors.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.