You can load the "rocket" while polyhard is on the drive?

Similar Questions

• You can load the update of windows on the computer and then one more

  You can load the update of windows on the computer and then one more

  You can load Windows * updates on multiple computers. Should not be confused with * updates *. TaurArian [MVP] 2005-2010 - Update Services

• You can load the drivers on a windows xp vhd?

  I have questions for my Samsung Intercept to truck drivers on my windows vista x 64 operating system. I thought that maybe if I load a windows xp vhd and load the drivers that samsung made that drivers for. No. x 64 bit drivers yet. My phone has the fine as a mass storage device, but when I put it in debug mode it will not come to look for more. Can you please help? This is necessary for a long time. Thank you.

  You would load drivers in Windows XP the same as you used for Windows XP virtual machine.  Start the virtual machine, then follow the instructions of the manufacturer for the loading of drivers.

  Be aware that these drivers work that from within the virtual machine, they will not do your camera is working in Windows Vista 64-bit.

  "hollistersurfer06" wrote in the new message: * e-mail address is removed from the privacy... *

  I have questions for my Samsung Intercept to truck drivers on my windows vista x 64 operating system. I thought that maybe if I load a windows xp vhd and load the drivers that samsung made that drivers for. No. x 64 bit drivers yet. My phone has the fine as a mass storage device, but when I put it in debug mode it will not come to look for more. Can you please help? This is necessary for a long time. Thank you.

• Load the driver - A required CD/DVD driver is missing

  I'm trying to install Windows 7 on a Dell Inspiron 1100 laptop, and at the time of installation, I get the following message:

  A required CD/DVD device driver is missing. I f you have a driver disk, CD/DVD or player of the USN, please insert it now.

  I guess only he eans there not a device driver for the CD/DVD that contains the installation disk. Which drive do I need and why is it not standard on Windows 7 installation cd?

  Hello

  The following message by Bummed about the details of the Support Forums Windows 7 how he got it past: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/a43574ad-e8d0-4d9e-aa86-6ddfda1e9079/Bummed Tuesday, may 12, 2009 18:25

  

  OK, so after three days to try and fight with the installation I have WIN7 RC 7100 64 bit operating.

  Given that many people had with missing driver CD/DVD, error I was blocked I'll list the steps I took to work. Before I did anything, I downloaded a free copy of Boot disc Hiren with Patch keyboard just in case I had of problems (freeware and easy enough to find if you google it). I found myself only use it for the DOS prompt but hey - ho...

  Some of these steps may seem redundant, but ultimately, this is what took the OS for me:

  1 partition and reformat HD's BACK with the commands FDISK and FORMAT C:

  2. install a Vista 64 bit version which, in turn, re-partitioned the drive itself

  3. once Vista was running (does not have a code because I knew that I wouldn't be on it for a long time) inserted the RC 64 bit DVD

  4. in the install window, I ran the check compatibility online tool

  5. He told me that my ITE IT8211 ATA/ATAPI controller must be updated in order to install

  6 Ran Wizard to update to Vista which has found a new driver for the ITE IT8211 ATA/ATAPI

  7 rebooted Vista 64 to finalize the updates updated (removed DVD RC while restarting disk)

  8. once started, re-insert the DVD of the RC, click on install and went through all the normal installation steps.

  Again, this may seem unnecessary (as the FDISK / FORMAT) time, but ultimately it's what works and what I've been through, the problem people seem to have with the CD/DVD driver not found is that the ITE IT8211 ATA/ATAPI controller is not updated. I couldn't find a place to just "Download driver" and put it on a drive flash or something, I got allow windows to do that I hope it will not be the people back. I'm not enough common sense to see if you can install the driver in another way.

  Hope that this info is of use to someone and if anyone has questions, feel free to leave a message and I'll check it out later today.

  Many thanks to Amrooz and Java_az who helped along the way!

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you buy a used computer how do you get around the user so password down, you can load your commands on the computer

  When you buy a used computer how can you getaround left password buy the former owner, so you can to the low load you information

  Hello

  I'm sorry, but the strategy of microsoft in these forums, is that without assistance will be given about the lost, unknown or forgotten passwords

  read the policy at the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

  ______________________________________________________________

  and when you buy a second hand computer, because you never know what it contains or is used since, the best policy is to reinstall the operating system

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• You can edit vmx file while the virtual machine is running? And is it safe?

  You can edit vmx file while the virtual machine is running? And is it safe?

  Hello

  Moved to the forum of the Virtual Machine and the guest operating system.

  If you edit the VMX while the virtual machine is powered on change is not levied until the power off then power on (not reboot) and there is a good chance that the change will be deleted when turn you off the system. So it is not safe to do so.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• Having trouble getting lists of reading is displayed on my iphone. I have already implemented the Division of the family and you can see the playlist on my other Mac (I have 2). Also, I have 2 iphones and cannot get the playlists will appear on the other.

  I have 2 macs. Let's call them A and B.

  Every Mac has an iPhone.

  I want to share playlists on A Mac with iPhone attached to Mac B and did not

  I have enabled the sharing of family and you can see the playlists of A Mac on Mac B

  Were unable have them appear on the iPad or the iPhone connected to the Mac B

  Have managed to see the playlists on the iphone connected to A Mac

  https://www.Apple.com/support/homesharing/getstarted/

  Read the guide carefully first.

  Then, make sure you have the same Homeshaing account (Apple ID) entered A and b.

  Enable sharing with in the preferences.

  Each library should appear and look like an icon 'home' in the top left area of iTunes (on both A & B).

  Select the library that has the playlist. Once the loading of the library, select the playlist view.

  Select the playlist that you want to import.

  Choose the area «...» "with your mouse and select"import playlist ".

  The playlist must synchronize with the goal of Mac. Under the iPhone sync settings, choose the playlist you just imported, and then press 'sync '.

• Windows Search 4 the program active with a log on before you can use the start menu. It is sometimes impossible to open an Office application.

  Original title: search Windows 4

  With Windows Search 4, the program active at the log on before you can use the start menu. Several search screens occur and reproduce when they are closed. Sometimes it's impossible to open an Office, research childcare opening application.

  Hi Ken_978,

  ·         How long have you been faced with this problem?

  ·         Did you do changes on the computer before the show?

  ·         The question is only limited to Office applications?

  ·         What exactly happens when you try to open an Office application? You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malware

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Method 2: If this does not help then you can uninstall and reinstall Windows search 4.0 on the computer.

  Follow the steps below to uninstall:

  a. click on Start

  b. click Control Panel

  c. select Add / Remove Program

  d. place a check on "Show updates"

  e. you will see Windows Desktop Search 4.0 and uninstall it.

  Reinstall back, you can see the link below:

  http://www.Microsoft.com/Windows/products/winfamily/desktopsearch/choose/windowssearch4.mspx

  Hope this information helps.

• I can load the speed in real time?

  Hi, guys.

  I'm working on my project now. Right now I use PCI 7344, UMI-7764, AC/DC motor sevro, their amplifiers and the camera of the UAB.

  I try to repair the braiding point machine to weave leadership x. usually the Plait point oscillates around a point in x direction.

  At first, I need to get the position of the point using cam USB, I've done braiding. The positions I got the cam of the UAB is in real-time.

  Then, I need your comments the position of the motion control loop. I intend to use the position to calculate the speed that responded to the questionnaire, which is real-time, too.

  Engine going this speed. Thus, it is supposed to get that engine will decrease or increase depending on the weaving point moving.

  I don't know if we can do it. I have yet found the relative position.

  Anyway, thanks in advance. Any idea and the idea is really appreciated.

  Guangli

  Guangli,

  as the camera of feedback is coming from a USB camera and with the during the calculations necessary to analyze the images, the behavior of your system in real-time is probably not very tight. Delays and jitter of the additional movement control operations are probably in the same order of magnitude as the delays and jitter, introduced by processing the image. If it's okay with you, can do the following:

  1. Load a maximum travel speed and acceleration/deceleration of the values for the axis
  2. With "Load Velocity override", you can pass the speed between 0 and 100%. Transitions of value axis a velocity to the adjacent spire to the value of the acceleration that you defined before.
  3. If you need change the direction of travel, you need to use 'Load speed' and 'Motion to start. " This operation is much longer that a speed of loading a substitute value, but in general you should not call this sequence too frequently.

  I hope this helps.

  Jochen Klier

  National Instruments

• You can run this program while using another anti-virus program

   
   
  You can run this program while using another antivirus program?
  I know that it is a matter of end now that MS does not have anyone else.
  However, I was going to dnld MS antivirus with Norton market too.
  I couldn't find info on one might or might not run another
  antivirus program during execution of the Member States. (as a general rule, you can't)

  Still, it would be interesting to know about this issue. And... Should be
  have been on one of the pages, so "requirements" or FAQ
  for example.
  Thank you in advance, Ric.

  Hello Ric Buckmiller,

  Thank you for using the Microsoft Windows Vista Forums.

  What specific Windows Vista virus protection software are you talking about?  Windows Vista will be usually comes with Windows Defender.  Windows Defender is software that helps protect your computer against the pop-ups, slow performance and threats caused by the software security spyware and other unwanted software to detect and remove spyware on your computer. Windows Defender Protection features in real time, a monitoring system that recommends actions against spyware when it's detected, minimizes interruptions, and helps you to remain productive.  Yes you can use it with antivirus software.

  Currently, Microsoft has an antivirus software on beta.  http://www.Microsoft.com/security_essentials/support.aspx
  If you have this downloaded, it advised that you can always use another software antivirus at this time.

  Or you are referring to Windows LiveOneCare?  Please let us know status.  Thank you!

  How to uninstall any other antivirus or firewall program?

  Before installing Windows Live OneCare, please make sure that you uninstall completely any existing antivirus or firewall program that may be on your computer.

  This step is very important, no matter what protection software you use, because installing one antivirus or firewall program over another on the same computer could potentially lock up the computer.

  Note: If you do want to keep the ability to reinstall your old antivirus or a firewall program in the future, make sure you have the original product CD (or a backup program disk) before you begin uninstalling.

  Engineer James Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I can find driver for my dvd writer dose not work Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) _ dvd writer ad - 7530 has ata thanks

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) has .dvd rw ad - 7530 ata

  Hello

  Code 39 means that the driver is corrupted or missing.

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  --------------------------------------------------------------

  Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
  are you can reinstall the 'old'. Many use Windows default drivers however some special aura
  ones. Also check the website of the manufacturer of the car.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows could not connect to the System Event Notification service. As an administrator, you can view the log of the events system for more details

  Original title:

  Office blocked in the classic theme.

  This morning when I started my computer, I noticed that it displays the following error message:

  "Windows cannot connect to the System Event Notification Service service. This problem prevents limited users to logon to the system. As long as administrator, you can review the system the event log for more details on the reasons, the service has not responded. »

  I went through the event log and found three errors:

  Name of the error: Service Control Manager
  Event ID: 7022

  "The Windows Audio service hung on starting."

  Name of the error: Application Popup

  Event ID: 875

  "Pilot atksgt.sys has been blocked by a load."

  Name of the error: Service Control Manager

  Event ID: 7000

  "Atksgt service failed to start due to the following error:
  This driver has been blocked by a load.

  There is no new hardware or installed software, virus/malware analyses provided no results. The only effect I can see is that the office is stuck in classic mode and options for the Aero themes are disabled.

  Any help is appreciated.

  I would like to use system restore to set up Windows in a few days.

• Search in the directory business - you can limit the search?

  We incorporate another company on our box of the unit. Is it possible, when they search the business directory to search ONLY within their business for them? Also when they press zero while voicemail is it possible to send to their operator as opposed to our operator? (I'm under unity 4.03 SR1)

  Thank you inadvance for your comments.

  You can segment the research of information for external callers using the name search managers, but for subscribers speaking the other subscribers, they always get the address list full of all users.

  The unit has no services tenent features as what you describe - there are some things you can do (that is, you can have the 0 on the greetings of the user key go to the appropriate operator), but you cannot segment the directory completely. Check out the book 'Audiotext Applications in unity' on the Documents page of the www.CiscoUnityTools.com for some details about what you can/Can ' t do regarding type tenant applications today.