You try to start wwireless network services.

Similar Questions

• Error 1068 when you try to start the WIA service after the installation of the W7 SP1

  Original title; Error 1068 when you try to start the WIA service after the installation of the W7 SP1. The scaner to my Epson Workforce 633 all-in-One printer does not work after that.

  SCANeR to my Epson Workforce 633 all-in-One printer does not work after the installation of the W7 SP1. I contacted Epson support and they told me I had to contact MS support to get help this isue. The problem is that something is not letting the WIA service to start and I am getting error 1068 when you try to start the WIA service.

  Hello

  Method 1: Try to uninstall and reinstall Epson drivers and related software.

  Visit our articles to do the same below:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

  Method 2: Also scan SFC (System File Checker) on the computer.
   http://support.Microsoft.com/kb/929833

  Hope this information helps.

• Error 0x800704b3 when you try to map a network drive

  Hello

  I have the following error message when you try to map a network drive in my home network:
  "\\iomegahmd cannot be reached" and the error code is 0x800704b3.

  I already looked in the services, and my strong assumption is that the problem is that 'TCP/IP NetBIOS Assistance' service is not statrted and it is disabled. When I try to start it, there is an error message:
  "The system could not find the specified path".

  I also checked the dependency of the 'TCP/IP NetBIOS Assistance' service components:
  Auxiliary function for Winsock driver
  NetBT
  TCP/IP protocol driver
  NetIO-legacy-TDI Support driver
  in the Device Manager is running, but they are all running. Startup is set to 'system '.

  Under the properties of version 4 of TCP/IP Internet of the wireless device, under Advanced-> WINS I ve put enable NetBIOS over TCP/IP, but it helps t is not either.

  What else could try, so that I can map network drives?

  I should also mention, that the problem persists for a few weeks. Before, it was working properly. In addition, on other computers on my network I don't have access to the same network drive problem.

  Thanks in advance,
  Tithe

  > I should also mention that the problem persists for a few weeks. Before, it was working properly.

  It of difficult to say what's wrong in your case. My first idea is: put installation beginning point of time before this error appeared.

  I recommend also to disable all security software and check if you experience the same problem.
  If you still experience the problem, then follow the link to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• I get the error access path/file execution error ' 75 "you try to start a product.

  I get the error access path/file execution error ' 75 "you try to start a product. How will I know which file it is trying to access. Is there a log or something?

  Hello

  1. when exactly you get this error message?

  2 have you made any changes to the computer before the show?

  Please provide more information on the issue so that we can better help you.

  In the meantime, make the boot minimum troubleshooting and check if the problem persists.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Startand then click run.
  2. Type msconfig and click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
  4. When you are prompted, click restart to restart the computer.

• When I try to start the time service Windows, I get a message:

  When I try to start the time service Windows, I get a message:

  ------------------------------------------------------------------------------------------------------------

  Windows could not start the time Service Windows on the Local computer.

  Error 2: The system cannot find the specified file

  any idea please?

  The question is similar but not identical.
  You can have a look. See if the answer in this thread will help:
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/6bbea43f-5575-4E78-9b52-ac766632bfc2

  Answered by: Martin - Support Engineer
  Date: June 20, 2009. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Creative cloud is defective. You try to start the trial of photographers.

  You try to start the trial of photographers. I have PS CS6 and Lightroom installed 6. When I download LR CC and try to open, it opens old LR6. Try to open PS CC and he said: the files are damaged or missing, try reinstalling. I tried several times. I tried to uninstall creative cloud, but he says apps on my computer in need! And you can also read my 7 day trial began.

  This is an open forum, not Adobe support... below to connect with Adobe personnel to help

  While the forums are open 24/7 you can't contact Adobe support at any time

  Chat support: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information help please 91026128

  I just bought an iphone 6 s second part and I got home put my SIM in there turn it on you try to start the activation process and he says that the phone is lock icloud, I tried calling get him etc. but he gave me the wrong information and I called apple, they said that its nothing they can do without evidence of perchise im broke I spent all my money on the phone, does anyone know any software free or something me please txt to 9102612856

  @Santonio99

  You probably bought an iPhone stolen 6. Mine was stolen in Barcelona in Spain on June 10 by a pick-pocket. Fortunately, there is absolutely nothing you can do to make an iPhone locked to the activation of the work.  You have a paper weight.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• code 80070017 error when you try to downland microsoft office service pack 2 on vista

  code 80070017 error when you try to download microsoft office service pack 2 for vista

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  This problem may occur if there is a failure of control of cyclic redundancy (CRC) check during the update process. This failure can occur if the received file is not the file that is expected by Windows Update

  Run the Chkdsk.exe tool to check the drive for errors

  If this does not help, then manually download the update you need and see if that fixes the problem.

  Description of 2007 Microsoft Office Suite Service Pack 2 (SP2) and of Microsoft Office Language Pack 2007 SP2
  http://support.Microsoft.com/kb/953195 TaurArian [MVP] 2005-2010 - Update Services

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Error 'Windows cannot find c:\windows\system32\control.exe' when you try to start Control Panel.

  Original title: windows cannot find c:\windows\system32\control.exe

  Using Windows Vista 32-bit SP2. I get the message: windows cannot find c:\windows\system32\control.exe when you try to start Control Panel. I have to solve as soon as POSSIBLE

  Hello

  1. What is the brand and model of the computer?

  2. What is the security software installed on the computer?

  3. have you made changes on the computer recently?

  Method 1.

  Start the computer in safe mode and check.

  Start your computer in safe mode: http://windows.microsoft.com/en-SG/windows-vista/Start-your-computer-in-safe-mode

  If you are able to open in safe mode control panel, and then start the computer in a clean boot state and check.

  Affecting system boot minimum state helps in the identification of third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 2.

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Method 3.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Only get a blinking cursor when you try to start after the installation of updates

  Original title: blinking cursor when you try to start

  After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

  Hello

  1 update you tried to install?

  Step 1:

  You can check out the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• software unknown error (0x00000d) exception when you try to start olympus master 2 prog

  When you try to start olypus master 2 has got the message "the exception unknown exception soft ware (0x00000d) occurred in the application at location 0x01ooo94818.

  I also looked in the management of the comp & found the following:

  Log name: Application
  Source: Application error
  Date: 2010-08-26 10:43:37
  Event ID: 1000
  Task category: (100)
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Admin-PC
  Description:
  Failing application OLYMPUS Master.exe, version 2.3.0.2, time stamp 0x4b0d15c5, failed module ntdll.dll, version 6.0.6002.18005, time stamp 0x49e03824, exception 0xc015000f, offset error 0x0005b80a, process 0xd2c id code, start the application time 0x01cb450320f41867.
  The event XML:
  
   
     
      1000
      2
      100
      0 x 80000000000000
     
      53267
      Application
      Admin-PC
     
   
   
      OLYMPUS Master.exe
      2.3.0.2
      4b0d15c5
      ntdll.dll
      6.0.6002.18005
      49e03824
      c015000f
      0005b80a
      D2C
      01cb450320f41867
   
  

  Am not a comp expert so any ideas on how I can get this prog to start over?

  Tried to put in orig cd but even occurs.

  Thank you

  Hambman

  Hi Hamman1,

  1. were you able to open this application as soon as possible?

  Step 1

  Check the hard drive for bad sectors.
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Step 2

  If the problem occurs, you might uninstall and reinstall the application to a different location.
  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Bindu R - Microsoft technical support.

• When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'

  Original title: login as administrator WARNING

  When you try to start Flight Simulator 2004, I get a warning 'Sign in as administrator required'. It never happened to me before, and I can't launch the Simulator. I tried to create a different user account has administrator rights, and then reinstalling the Simulator in this account. It did not work. I don't know how to remove the windows updates and I can't return to my windows to a previous state. Flight Simulator start in "Safe Mode" is no help either. Can anyone give me any help would be greatly appreciated. Thank you in advance.

  Wonders will never cease! I also, lived the same issues with FS2004 and CFS3 which began some time in the past months. Located at KB3086255 was updated and deleted and everything seems to work again.