your computer seems to be configured correctly, but your dns server is not responding

Similar Questions

• Windows Network Diagnostics error message: "your computer seems to be configured correctly, but the device or resource (DNS server) does not.

  Everyone,

  I'm trying to configure the WIndows server.  I am running the following: Windows Server 2012 R2 Foundation.

  I did the following:

  1. I crossed the Config Wizard on domain Active Services and installed it.

  2 then I joined the field.  When I reboot the server, I get the following error:

  A. "your computer seems to be configured correctly, but the unit or".

  "resources (DNS server) is not responding.

  A1.  When I put a static IP address on DNS, I can't go to the Internet.  Even if

  I can go to the tank and the PING of the IP address and everything is good.

  A2.  The I change the DNS to get the IP address automatically.  Then I can get to

  the fine of the internet, but I still get the same message about a problem with the

  DNS server.

  Can someone guide me please what the issue is here?  Thanks in advance.

  3. Furthermore, I can't see the new server name/information when I go into Windows Explorer

  as part of the network.

  A. I'll go in Windows Explorer and see the other machines when I look at the network level.  Yet,.

  for the that set up simply, I can't find it, please help.

  Thanks in advance.

  Jerry

  Hi Jerry,

  I would like you to post your question in the forums TechNet for assistance:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  I hope this helps.

• I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding)

  Hello

  My computer is stuggling to access internet, I get this message - your computer seems to be configured correctly, but the device or resource (DNS server) is not responding).  All the other computers in my house are connected without difficulty.  Any suggestions?

  Thank you

  I solved the problem.  When my router lost power, somehow the addresses changed if the IP address of the Dell Wireless computer is no longer fell in the pool of addresses maintained by the router.  When I've reconfigured by router and had released and renewed my IP on the Dell computer, everything started working again.

  Thanks for your help!

• I am fully connected to the Internet, but my DNS server is not responding. How can I connect otherwise?

  I am fully connected to the Internet, but when I click on my home page and even several other pages, including Windows Live Mail, I get an error message that my DNS server is not responding. How can I work around this problem and to connect to the Internet anyway?

  You want to be sure that you use the right setting for your DNS server.  You can move this in your browser using the digital URL for the what you want to access web sites.  You will find them by using the PING command at the command prompt.  Hold the Windows key and press R.  Then type CMD and press ENTER.  Then enter for example to get the address of the web site of MS PING WWW.MICROSOFT.COM.

  Unless otherwise directed by your Internet service provider, you want TCP/IP settings to "obtain an IP address automatically" and "Obtain DNS server address automatically".  To do this click Start-> Control Panel-> Network Center and sharing-> view status.

  Then click on properties.

  From there, click on Internet Version 6 Protocol and properties.

  Click on the two radio buttons to "obtain an IP address automatically" and "Obtain DNS server address automatically".  Click OK.

  Then click Internet Version 4 Protocol and make the same changes in what concerns the version 6.

  I hope this helps.  Good luck.

  Good luck.

• my internet is not works is said your computer appers to be confiyured correctly but the DNS resource does not

  my internet is not works, said that the computer seems to be correctly configured but the device or resource DNS does not

  Can you check this problem on Firefox 9?

  • getfirefox.com

• Your computer seems to be configured correctly, but the device or resource (DNS server) does not

  Yesterday afternoon after NO change in the system, I lost my Wired internet connection on my Dell XPS 630i running Win 7, but all the other wireless devices in the House are still able to connect to the internet.  I tried:

  * power cycle router, modem, etc.
  * reset the router (then reinstalled)
  * cables
  * checked NIC as much as I can because it is "integrated" and not his own card NIC I can reinstall (the light is on and says Windows adapter works)
  * all connection settings are set to automatic (without static IP)
  * I have also read through all the other posts with this same error message and tried everything listed there

  This morning, I tried to connect to a wireless using a Netgear adapter from another computer to work in the House.  NETGEAR said it is connected to the network, but I still have no Internet with the same error message as above.

  Help!

  If you did the Windows updates, then I should have mentioned that the KB2705219 update could be the cause and uninstall that solved the problem for some users.  To uninstall an update - control panel, programs & features, [left side of the window] see installed updates. Wait until the system has finished the research for the list of updates. Select update required, then right click and Uninstall.

  But if you have McAfee then see this McAfee reviews.

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  While it remains the case that uninstall Win7 KB2705219 solved the problem for at least two users update, you should do the fix McAfee, if necessary.

  I have McAfee, but the connection has started working again on its own so I thought I was clear of problems. However, when I checked it says he was doing routine checks the updates in vain when I told it to do a manually. So stick with McAfee without following their abduction - Reinstall procedure would have upgraded my PC at risk by not updated. Actually, I removed and then installed Microsoft Security Essentials rather & my answer IE is faster I knew it [even though I had the Add-ons McAfee disabled for centuries].

  I had to run the MCPRT deletion a few times before and it caused a problem with the license if the PC was not connected to the internet during the abduction. Due cat of McAfee support reset their files in order to allow the relocation-reactivation. Here is their link cat - McAfee - media contains the link to the cat

• "No access to the network" problem in Windows 7 and error message "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."

  Hello, I have a desktop PC and a laptop (DELL Inspiron N-4050).
  I have problem with my internet connection cable which is working fine on my PC, but does not not on my laptop giving an error "no access to the network.

  When I troubleshoot it says "your computer seems to be correctly configured but the device or resource (DNS SERVER) is not responding."
  I said to many technicians of microsoft online response, but they could not solve my problem and said this is my DNS problem and advised me to contact my Internet service provider. Guess it's because of my internet so why it works on my PC not on laptop?

  Yesterday, my ethernet cable pulled out my cell phone and I couldn't connect to the internet more. But on my desktop PC, it works perfectly fine. (I do not use wifi, if this information is also required) I have studied several threads with similar situations, and I have tried different methods to solve the problem to no avail. I did a system restore, but I'm having no luck. Also, I did not of the latest changes with my anti virus software and my LAN card drivers look to date.

  When I remove my cable from the laptop and again connect my cable then it works but only after the PC sat for awhile.
  1.I did flush DNS by typing "ipconfig/flushdns" in the command prompt.
  2. my IP address, DNS, subnet mask etc are set to automatic.
  3.I also added physical address taken from command line giving "ipconfig/all". for the properties of the network driver settings.
  4.I ' installed the drivers to date of 2014 on my laptop.
  5.I did a lot of searching the web, but they do not solve my problem.

  Please help me to solve it.
  I appreciate your help.
  Thank you.

  Hello Hall,

  Please keep us updated on the status of the issue.

  I suggest you to follow the steps in this Microsoft article troubleshooting and check if it helps:

  Error message "your computer seems to be configured correctly, but the device or resource (DNS server) is not responding" in Windows 7

  http://support.Microsoft.com/kb/2779064/en-us

  Hope the helps of information.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• The computer seems to be configured correctly, the device or resource (DNS server) does not

  When I tried to fix this using other threads, none worked any other suggestions?

  Original title: your computer seems to be configured correctly, but the device or resource (DNS server) is not responding. I tried all of the solutions none works

  Hello

   
  
  This problem is limited to a specific Web site or with everyone?
   

  You can approach this problem in two ways: first by simply disabling the cache, but also by restarting DNS client service, which manages the cached DNS queries.

  
   
  Method 1: Clear DNS Cache

  a. click Startand type cmd in the Start search box.

  b. right click on cmd in the list programs, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  c. at the command prompt, type the following line and press ENTER:

  ipconfig/flushdns

  Usually, it clears up any issue that may occur.

  
   
  Method 2: Restart the Service DNS Services

  a. Click Start and run, type services.msc, and then click OK.

  b. double-click the DNS Client service. If you receive a Configuration Manager message, click OK.

  c. in the Startup Type list, click on restart and then click OK.

  d. close Services.
  
  e. restart the computer.

  
   
  Method 3: Configure the connection to obtain an IP address automatically

  a. click on 'Start', enter "NCPA. CPL' (without the quotes) in the search bar and press "Enter."

  b. right-click on the network connection, and then click on 'Properties'. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on select 'Internet Version 6 (TCP/IPv6) Protocol' and then click 'Properties' of .
  
  d. Select "obtain an IP automatically" and "DNS server automatically get an address.

  e. click 'OK'.

  f. highlight "Protocol Version 4 (TCP/IPv4) Internet" and click on "Properties". "" "

  g. Select "obtain an IP automatically" and "DNS server automatically get an address.

  h. click on 'OK'.

  i. restart the computer.

  See also:

  Why I can't connect to the Internet? http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

• Network troubleshooting is he diagnosed "your computer is correctly configured, but the device dns server is not responding...". How can I fix it

  I get a lot offline on my laptop. After that I ran the network troubleshooting is diagnosed "your computer is set up correctly, but the device dns server does not respond.  How can I fix this problem please?

  Hello

  1. what operating system is installed on your computer?

  2. are you using wired or Wi - Fi?

  3. you will remember to do recent changes on the computer before this problem?

  I suggest you

  Method 1:

  Empty the Cache DNS (Domain Name System) follow the steps below:

  a. click the Start button.

  (b) in the search box, type command prompt.

  c. in the list of results, right-click command prompt, and then click Run as administrator.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  d. at the command prompt, type ipconfig/flushdns.

  Method 2:

  If the previous step fails, follow these steps and check if the problem persists:

  a. click "Start", enter "NCPA. CPL"(without the quotes) and press ENTER.

  b. right-click on the connection you use for the local connection, and then click "Properties".

  c. Click to select 'Protocol Internet Version 4 (TCP/IPv4)' and then click 'properties '.

  d. in the Internet Protocol window, we will change the "Preferred DNS server" to 208.67.222.222

  e. click 'OK' twice to complete the change.

  f. If the problem persists, please repeat the steps and change the "Preferred DNS server" to 208.67.220.220.

  Method 3:

  If the previous step fails, follow the steps described in the following link:

  http://support.Microsoft.com/kb/928152

  For more information, check the following links:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• "The DNS server is not responding", but I had problems when I tried the fixed IP address. Help!

  Hello

  With some networks, all is well, connected and has internet access.  In other places, like where I am now, I can connect to a network, but I can't access the internet.  I tried the long fix recommended on the community of Miscrosoft, start by entering cmd at the beginning and then dealing with IP addresses, but I kept getting "Media disconnected" and where he would have had this connection to the Local network #, 0.0.0.0 or something else, I saw that anywhere.  He just said Local Area Connection * 12 because I remember and then was something like 00000000000000E at the bottom of the entry.  I also tried the method 2, use the control panel and the connection of LAN, but then 'properties' properties of it has not been highlighted, so I couldn't continue.  Windows 7 laptop.  Help!

  Thank you.

  Hello

  I think I have solved it!  I use your method 1 and took the link to Microsoft Support.  Then, I used their method 2 (TCP/IP configuration settings), without success.  But I just had an intuitive idea, so I tried again, but do not click on the Local network connection, I clicked on the network, I try to use, Fairpoint-etc, went in and saw that Internet Protocol Version 4 was not set to automatically obtain DNS server address.  So I chose that, hoping that I didn't just kill my computer and voila!  Internet access is here!  We'll see if it stays.

  Where it rises again if, because you asked, Yes, I am using a wireless connection and my anti-virus is Avira.  Out of curiosity, is this good antivirus, or is there something better that is also free?  Thank you very much
  Ursa

• Your POP3 server has not responded in 60 seconds. You want to wait 60 seconds for the server to respond?

  I can't get my email charter.net working in Windows Vista Mail...

  POP3 account

  pop. Charter.NET port 110

  SMTP. Charter.NET port 25

  I tried a lot of things.  It doesn't work in Thunderbird either. Any help would be greatly appreciated.  I have gmail accounts that work FINE in Thunderbird... probably would work in Windows Mail... just is not done because he didn't need to.  I need my account of the Charter to work in SOMETHING... anything!

  Thanks in advance. :)

  Connect to the site of Webmail to the Charter and read/erase messages there. It seems that one of them is damaged or very large. Bruce Hagen ~ MS - MVP [Mail]

• After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work.

  After a computer crash, I reinstalled Windows XP, but Windows Media Player does not work. I don't have reinstall all disks. Will install tools software system Dell, Sonic RecordNow, Sound Blaster Live, or CyberLink Power DVD play cd possible? Thank you.

  original title: Media Player

  Hello

  1. What is the exact error message or error code when you try to open Windows Media Player?

  2. what version of Windows Media Player?

  3. What is the issue you are experiencing during playback of the CD?

  I suggest you follow the Microsoft article reference and check if it helps.

  Troubleshooting playback in the Windows Media Player for Windows XP: http://support.microsoft.com/kb/306317

  Resources for the resolution of problems in Windows Media Player: http://support.microsoft.com/kb/843509

  I recommend you to install the software provided by Dell disk and check if it makes a difference.

  Note : using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded.

  I can access the internet but can no longer send or receive mail. I get a message that the POP 3 Server has not responded. Nor do the SMPT server. 0x800CCC19 error number is given in both cases. I have no help when I type the error number in the help Windows Mail. How can I solve this problem?

  original title: can't send or receive emails.

  Tools > accounts > select your account > properties > Server tab, ensure that 'Connect with password' is not enabled.

  Or you might want to try the new port settings.
  http://www22.Verizon.com/residentialhelp/highspeed/email/setup+and+use/questionsone/124289.htm