YouTube and the name of the video thumbnail
Is it possible to somehow get the preview of the image and the name of a youtube video if we have the url of the video only?
I must also compatible os > = 4.6
Yes, but you must use the API through YouTube availble.
Tags: BlackBerry Developers
Similar Questions
-
C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?
Hi Johnny,.
Perform the System Restore to an earlier date and check if it helps.
System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.
Hope this information helps.
-
When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
will have no sound. (but in the contact box everything its fine) Why is this?Why is this?
Because you forgot to patch source audio track.
-
Problem with the video thumbnail and presentation on SnS
Hello
I have install DMM and SnS 5.2.0 on vmware. Problems are video thumbnail not worked (just see the static image as a roll of film) and if I created the video with the presentation, the image of presentation showed nothing. This limitation comes from the vmware version? Thank you.
In this case, show and share should generate thumbnails automatically.
Anyway, as you know that VMware version is not officially supported, so if you want to continue, the first thing to do would be implementation of the software in a show and share the device and see if the same problem occurs.
That's what I get to support your configuration
Concerning
Daniel
-
Original title: just download windows 8 and I can't stream video without disconnecting from the internet
Whenever I try to stream youtube or playing League of legends that I must restart my comp re connect to internet and I have nother computers on this network is not this problem and im directly connected with a cord ether net ive tried reseting my modem and reinstalling/updating the driver of my connection
It was my network card, it was not compatible with windows 8 my thanks for the help!
-
Since the DL the last worm 34.0.5 FF, I now spend my mouse for nothing to take. Also, when I play a video or live site TV the sound is good but the video is choppy and I have to constantly keep moving the mouse for him to play. This never happened before this download. Up to present most of the proposed fix has not solved the problem.
Running Windows 7.Make a check of malware with several malware scanning of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- Malwarebytes' Anti-Malware:
-
change the video thumbnails from the icon of the default program in the image of the video
Hello, when I capture a video on the web using a download manager and place in a folder, open the folder and select "Large icons", it displays the image by default. I want to display an image of the video.
I tried to uncheck 'display the file on the thumb icon '. And I tried to check it out. It has not changed anything.
I tried to change the 'default' program, but the thumbnail does is display the image of the new default program.
I tried to "Set your default programs" to "Windows Photo Viewer (these are responses from Forum site)."
Nothing works. Can you help me?
Thank you, Stephen box * address email is removed from the privacy *.
Vista.
Vista has no support for Thumbnailer for mp4 files. There are extensions of the environment that offer this feature, which can run Windows Vista.
REF:Add thumbnails to all your multimedia files in Windows with Media Preview - freewaregenius.comhttp://www.freewaregenius.com/Add-thumbnails-to-all-your-media-files-in-Windows-with-media-preview/ -
Sound and the video does not.
I just bought the new Windows 8, but the sound does NOT work! The audio and video such as youtube has ton of lag and does not work. I did what a technical support technician said to do. the convenience store did not work no matter what and I uninstall and re-install the drivers. What else might work? If this isn't the case, I would have my money. Thank you
Hi TrevorAdams,
Welcome to the Microsoft Community, the best place for all your windows related queries.
Looks like you are not able to play the videos and audios on your computer. I can assure you that you have not made a mistake by buying windows 8. We're here to help.
I would like you to answer a few questions to solve the problem.
1. What is the brand and model of your card graphic and sound card?
2. do you have any error messages related to the audio and sound card when you ran Upgrade Wizard tool to level of Windows?
3. What is the brand and model of your computer?
I suggest you to check the status of your sound and graphic card and answer us.
Check the status of the sound card in Device Manager.
a. press Windows key + X , and then select Device Manager.
b. search for sound, video and game controllers and expand it.
c. right-click on the driver and click Properties.
d. Select the general tab and look in the device status box to identify the problem with the sound card.
Check the status of the graphics card in Device Manager.
a. press Windows key + X , and then select Device Manager.
b. search for graphics cards and expand.
e. right click on the driver and click Properties.
c. Select the general tab and look in the device status box to identify the problem with the graphics card.
Your answers are important to us. Come back with answers.
-
Qosmio F750-03W - face recognition does not start and the video freezes
I apologize for my English.
NVIDIA 3D test shots of program wheel. Face recognition does not start.
If the activator of the image that 3D is disturbed and I do not see the image in 3D.If I try the Games 3D compatible (Left4Dead) active 3D 1080 p, but the game is choppy as the test 3D image not turn on face recognition.
3D game is to see the 2D to 3D pictures, but how do I vadere photos in 3D?If the Activator active 3D image quality is mediocre.
I have defined normal and advanced, but videos have gost especially on side effects.Hello
It looks like your Qosmio F750-03W PQF75C 03W001 is a Canadian model of Toshiba that I found it here:
http://support.Toshiba.ca/support/ISG/Center/en/index.asp?S1=notebook&S2=Qosmio&S3=F750&S4=PQF75C-03W001First you need to update the BIOS with the latest version (at this time, it seems that BIOS 2.0 is the most recent).
Also update the
nVidia Display Driver version 8.17.12.9039
Super-D IC Driver version 1.0.1613.809
Toshiba Blu - ray Disc Player version 1.0.1.299
as mentioned here http://support.toshiba.ca/support/isg/tsb/en/view.asp?docid=TSB001633If stereo 3D effects are not well use X-tune to calibrate it.
It is recommended to use this utility to optimize the 3D stereo effects when you use the 3D without glasses for the first time or to be dissatisfied by the 3D effects.To use the X-Tune utility, follow the steps below:
1. Select the language mode and optimization, and then click OK. There are three optimization modes: primary, advanced and professional. You can choose according to your own experience.
2 sitting about 60 cm from your computer, click Start to continue.
3. follow the onscreen instructions on each step.
4. use the left or right side of the keyboard arrow key to adjust the effect. When you are satisfied with the effect, click on enter and then an information window appears on the screen. Press the keyboard ESC key to cancel the optimization procedure.
5. click on Finish to close the X-Tune utility.You said that your face recognition does not work correctly so uninstall this software. This also with the software/driver for webcam. Once these two tools has been uninstalled, clean the registry with CCleaner and install these two tools using the most recent version.
Restart and start X-Tune to calibrate the 3D effects.In the doc of Toshiba (link above), you can find this notice:
1. the value [screen resolution] 1920 x 1080. Glasses free 3D mode is not activated except in mode 1920 x 1080.
2. depending on the game, it does not work with glasses free 3D mode and with the 2D mode.
3. depending on the game, it display correctly with stereoscopic 3D mode
4. the game does not appear with glasses free 3D mode when you run drive Blu - ray TOSHIBA with glasses free 3D mode
or run TOSHIBA Web Camera application.5. the performance of the game will be reduced when the game with glasses free 3D mode. If the game performance is considerably diminished, please reduce the quality of the image of the game by using parameters
of the game. If the performance of the game are still not sufficient, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.6. small fonts in games can be difficult to read with the glasses free 3D mode. At this time, please press the PC 3D and temporarily disable glasses free 3D mode. Glasses free 3D mode is enabled if you again press the 3D button
7. the response of the game may delay with glasses free 3D mode. If you feel it and can not enjoy the game, please disable mode 3D free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.
8 glasses free 3D mode can be disabled temporarily by pressing the PC 3D button, but it can be activated by playing game. At this time, please press the 3D button and turn it off again.
9. when [enable stereoscopic 3D] in NVIDIA Control Panel is not checked, the game will start with 2D mode. At that time, glasses free 3D mode is not enabled even if you press the button during the game PC 3D.
10 glasses free 3D mode may be turned on except TOSHIBA Blu - ray player and games. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.
11. the color of the video may be different from the original during video playback with full screen on RGB and not 3D TV if [enable stereoscopic 3D] is checked. Currently, please turn off the 3D mode free glasses by uncheck [Enable stereoscopic 3D] to the NVIDIA Control Panel.
I hope this helps.
-
video will not play
I have just made a video and went to look once more time to fix tiny desync and will not play the video! Help!Hi Tasha,
1. you play the video in movie maker himself?
2 operating system Windows after you?
If you use Windows Live Director, you can post your query in the Windows Live Forum for assistance.
-
I spilled liquid on my G6 Pavilion and the video card no longer works
HP Pavilion G6 series number 868R4-FV6RQ-BHRP9-BJCP9-BY2TY
Running windows 7.
A cat knocked over a cup spill liquid on the computer. He connected, blue return projected and restarted itself. Aside from the message that it is a Code of 43 for the video card driver, things seem to work.
What can we do?
Turn it off! Unplug the power cord! Remove the battery!
Partially disassemble the laptop and let it dry for 5 days in an air-conditioned room, back to gether and hope that there is no permanent damage.
-
I have 8 GB reviews and photos and video no longer work. I have the latest firmware. I used Sansa Media Converter to load 1 picture and 1 video on the view. With the image, it will show the preview, but when I click to see the large version of the image it shows just a screen as it is a song played (title at the top, where the art of the album would be blank and the volume at the bottom of the image). This happens also with videos, but it plays the sound, just no picture. All pictures by default and video works perfectly when I bought the player, but I don't think that I never tried to load a back when I was using firmware by default. I had to update because my battery life was only a few hours.
Too bad. I came across a thread that says turn off "TV OUT" and it works now. Sorry for not doing this before!
I have an another question though. I am trying to load a video file large enough on the view (it's about 700 MB) and it takes forever. Y at - it something that I should do so that it doesn't take so long, or should I just wait it out?
-
Audio setting on the music and the video track separately?
Hey everybody. I am a new user of first old clip and I didn't open the app on my phone for a while. I really appreciate all the new and improved features. One thing I had a lot of trouble to determine is if I could change the volume of a music track discreetly of the audio in the video track itself? Maybe I'm missing something obvious, but I played a bit with the audio settings and found them a bit confused.
Thanks a lot for your time!
-quin
Hello Quin,
Welcome to Clip you can both edit your soundtrack and audio video independently.
To adjust the volume for your soundtrack, press the icon of music on the top of your screen. Once in the menu of the soundtrack, move the Volume slider to the desired level.
To adjust the volume of a video clip, select the item in the sequence, press the speaker on the bottom of your screen icon. From there you can mute or increase or decrease the volume using the volume slider.
I hope this helps!
Best,
Peter Garaway
-
Please help the question above
I use a Surface Pro 3 without a keyboard, so it isn't an ESC that I can use. However, by using the onscreen keyboard and pressing Enter, I finally able to bypass the video.
-
Anyone had problems with PP CC 2014 closing app when they scroll over a video thumbnail in the library or when moving the marker on a video clip in the timeline. If I change my opinion of the library of thumbnails in the list, the problem doesn't happen, but the marker on a clip in the timeline still cause the app close. Any ideas?
Update your video driver.
Maybe you are looking for
-
Bookmarks synchronized to the new computer but miniature icons did not come along.
I have synced my bookmarks to a new computer, but the little miniature icons identify did not come along. So now, there is just a generic blank next to each box until I click on the bookmark, to whom it point refreshes with the appropriate icon. Is i
-
I can't connect to Ebay more - he continues to go back to the sign in screen
As soon as I sign in Ebay, it goes back to an empty sign in screen. This only happens in Firefox. IE is OK.
-
cwdsp. Sine wave is where the sampling rate?
Hello According to the method above (CWDSP. Sine wave), the parameters are the following: (n, a, f, Phase) n As Variant - [Input] number of samples to generate.Amp as Variant - [Input] Amplitude of the signal that results.f As Variant - [Input] frequ
-
PC will not boot after loading sp3 for Windows xp__
I loaded sp3 for windows xp and now the system does not restart. He is caught in a loop. It is now trying continuously restart. I tried safe mode and it just scrolls the file names and stops. I tried the last successful reboot option known and th
-
That's happened? I don't see NMP to https://tools.cisco.com/smartservices. Not in the more menu: screen_shot_2016-05 - 01_at_11.19.06_am.png SNTC appeared on this menu.